Connect 2 capsules of time?

Similar Questions

• new Express connects properly to the Time Capsule, takes both in offline mode

  I bought an Airport Express to extend the network of my time capsule wireless (2014). Introduction following the instructions as shown in the extend a network , it connects then after seconds seems to knock the time Capsule out of the network Express drops off the power, then the two, this happening again.

  I looked online and when a successful network is established a dotted line indicating a wireless connection appears under the time capsule, on mine utility Aiport is implementing a continuous line next to the time Capsule. Hope this has meaning and any help is greatly appreciated.

  In general you're doing something wrong... for example... you have ethernet connected between the TC and the Express... and then extend it by wireless... that will do exactly what you live... extend a network can be in wireless or ethernet... What are you doing?

  IF in wireless then no ethernet connection...

  If by ethernet then you do not extend... you create a network name parameters and security wireless...

  All this is supposed to happen automatically but frankly the magic went out on Mavericks and now it's just hard work.

• I had to have an iphone 4, but is unable to operate in Italy. It is supposed to be unlocked by Apple and O2, but when I try to connect with wind or Tim there is no service. What should I do?

  I had to have an iphone 4, but is unable to operate in Italy. It is supposed to be unlocked by Apple and O2, but when I try to connect with wind or Tim there is no service. What should I do?

  Maybe it is locked, Apple do not unlock phones, then call O2.

• Time Capsule on Time Machine goes wrong

  Using Time Capsule with Time Machine backup.  How can I erase the Time Machine backup and make a new, full backup.  I have two clones, just in case where.

  Open Airport on your Mac, Dave utility, click on the image of the Capsule, and then Edit in the pop-up window, finally, go to the disk tab and you will find the function delete . Once completed, you can return to Time Machine and launch a full backup once more?

• My macpro is backup in the capsule of time even when I was at work, which means that the time capsule is consumed my data plan. Can anyone suggest a way I can have it the backup only when my mac pro and time capsule is in the same local wifi

  my mac pro is backup in the capsule of time even when I was at work, which means that the time capsule is consumed my data plan. Can anyone suggest a way I can have it the backup only when my mac pro and time capsule is in the same local wifi

  If the Time Capsule and MacBook Pros are not on the same network, the MacBook is not backup in the time Capsule. You probably see what snapshots leaving MacBook on the local disk, until the two are reconnected. If you don't want that to happen, disable Time Machine on a different network.

  Good day.

• Re: Satellite Pro A300-1EA - wireless connection, drop all the time

  Hi, I have a problem with my wireless connection fall all the time on my Satellite Pro A300 1EA.

  It happened earlier, but I've fiddled about a little with change of drivers and the removal of the connection settings for the registry and it then worked fine for months, until yesterday.

  There were several updates for Windows installed yesterday, but none of them have been updated driver for the wireless card, and they don't look like they should cause problems. The fact that the problem happened before makes me think that the updates can be anything to do with it.

  I use the * Intel PRO/Wireless 3945/4965/5100/5300 * for Vista 32 - bit version 12.2.0.11.3 drivers from the Toshiba download page.

  Other computers on the same access point have no problem, so I think it is specific to this laptop. The connection speed is normally 6 Mbps, but I cannot even check e-mail now without the abandonment of the connection.

  Laptop will be thrown against a wall soon if no one can help you.

  Thanks in advance.

  Edit: I've already made sure power settings are at maximum to the WLAN card, even if on battery, or what power management.

  Post edited by: mjbcrawf

  Hello

  Have you tried to use the Windows System Restore feature? After that your WLAN should work fine again.

  In addition, I can recommend the latest WLAN driver in the Intel page, it s version 12.4.xxxx. I installed the driver on my Qosmio laptop and don t have any problems with it: [www.intel.com].

  If you have any other questions, please let us know!

• iPhone 6 Apple Watch and BlueAnt q3 does not connect at the same time.

  IiPhone 6 + Apple Watch and BlueAnt q3 does not connect at the same time

  My Apple Watch and Blueant Q3 connect at the same time. You try to connect the Q3 and the watch to the iPhone, or you try to connect the Q3 of the watch?

• is there such a thing as an internet connection timer? I'm lost and then community internet connection g at different times of the day.

  is there such a thing as an internet connection timer? I'm lost and then community internet connection g at different times of the day. I have just hooked to the nbn (national broadband - Australia Network) and have just bought a wireless modem/router 9323 method. I set it up and it worked. I noticed that I have two internet connections when I go to access the internet. one is a broadband connection and the other is nettcomm wireless 9323. What gives with that?

  You have a connection wireless and broadband that you could use one or the other or both. It is recommended to use one at a time. Contact your internet provider and discuss the issue with them.

• Is it possible to have two mice connected at the same time?

  Hello. I have a gamer mouse, and I am pretty tired of changing the battery every now and then. So I was wondering if I could connect a wired mouse, I could use on the desktop, while my current mouse is always connected - for when I want to do some gaming. Windows Vista will allow that I have two mice connected at the same time?

  Hello

  You can connect two mice of universal Bus controller to the computer, but it goes to show that a single pointer.

• 5520 HP usb and a wireless connection at the same time

  I have set up my new 5520 HP with USB connected to my desktop (Vista) for maximum reliability and can print via printer share from my laptop (XP), but I'm obviously missing out on HP web services.  Can I have the USB connection or wireless connection at the same time?

  Hello f1charlie,

  Its new r: YES, because it would be 2 printer icons. One for the USB and the other for the wireless.

  The icon of the printer wireless would be similar to Hp 5520 (network).

  You can set these printer (USB or network) icon to by default.

  But again, every time that you want to print using any application. Click file > print, which will display a dialog box, where, in, you can select the printer icon.

  Kind regards
  Jabzi

  Help the community by marking this post.
  Your question has been answered? Mark it as a accepted Solution!
  See a great post? Give it a Bravo!
  I work for HP

• Connection Internet drops several times every 5 to 15 minutes

  Connection Internet drops several times every 5 to 15 minutes.  It is an old ASUS week ultrabook computer that is running Windows 7 Home Premiuim.  The problem is not the network as 4 other wireless computers work properly. Also, same problem is observed on the other two networks.  Only change in the computer as he received is the addition of Kapersky anti-virus and Microsoft Office 2003.  Problem seems to be with Windows 7.  The yellow triangle of death appears on connection bars when the problem occurs.  Disconnect and reconnect the Internet solves the problem for another 5 to 15 minutes.

  It seems to me that it is a possible driver with the card built into your new laptop wireless. You can consider using Device Manager to check to see if there are problems reported with the wireless adapter. Also, I suggest that you visit the manufacturer of the laptop and get the latest available wireless drivers for that brand and model.

  You could also have a hunt in the event log and see if there is any additional details that might shed some light as to why the wireless network has decreased. That his fall is one thing, but the log events might suggest a few reasons for this.

• How user by VM (XP) can connect at the same time?

  Hello guys,.

  We test VMware View 4 and so far work fine, but I have a question? How many user by VM can connect at the same time? I test with 2 VM (XP) in the pool, but I want to use more than 2 users, but when I try to login doesn't say "no resources available", what that means is that a single user by VM? Us who is running Terminal Server and try to find alternatives.

  Thank you

  It's the same as with a XP machine. 1 single user can connect at the same time.

  André

• Direct DB request - Connect 2 patterns using 2 pools of connections at the same time?

  Hi all
  
  Will be "Request for Direct database" feature allows to connect to two pools of connections at the same time?
  
  Output report is based on the UNION of two select statements from two schemas, two pools of connections are created to access two schematics
  
  First select statement comes from a single schema and second select statement just forming the other
  
  Select Column1, Column2, Column3 from A, B, C
  UNION
  Select column4, column 5, column6 of X, Y, Z
  
  A, B, C paintings come from the first schema and X, Y, Z come from another
  
  How to get the above out put using "application for Direct database"
  
  Kind regards
  SMA

  It is a very bad idea. If you connect to the same base, then it will be much better to simply synonymous and grants between the schema1, schema2 objects so that you can use a single connection. You query will go much quicker since the BI server do not have to run separate queries to stich together data. If the data are two different databases, it is advisable to do some ETL and group all the data in your Data Warehouse database.

• Why my iMac does not automatically connect to my Airport time capsule.

  Why is my iMac not automatically connected to my wireless after waking up, since I upgraded to OS Sierra?

  Hi kamoore65536,

  Thanks for the upgrade to Mac OS Sierra! I understand that your Mac does not automatically connect to your airport after waking up from his sleep. There may be several reasons why this may happen to you. You can try to run Wireless Diagnostics to see if macOS Sierra can automatically fix the problem. If the problem cannot be solved with Wireless Diagnostics, make sure your wireless network is at the top of the list of your favorite network settings. You can also try to clear your list of preferred networks, and then re add your Time Capsule.

  Search for Wi - Fi using your Mac problems

  macOS Sierra: choose the preferred Wi - Fi networks

  This should have your Mac connecting the airport automatically as it did before. Please use the Apple Support communities to post your question.

  Have a great day.

• Unable to connect to the Network Time Capsule wireless

  I just changed ISP (AT & T to Time Warner) and I use my own modem cable (Arris SB6141). I connected by TC via the WAN and knitting laptop via the connection to the local network, but now only my MacBook Air (El Capitan running) connects to the wifi network of TC. Nothing else connects; AppleTV (w/Siri), iPhone 6s (9.3.1). Is there a compatibility issue that could be the cause of the problem between the modem and the TC? Or is there something I'm supposed to change with the settings? It worked fine when I was using a router 2WIRE AT & T U-Verse.

  Looks like the router Mode of the time Capsule airport is set to Off (Bridge Mode)... (which would have been correct for use with a 2Wire product)... but, it must be set to DHCP and NAT to use with a simple modem.

  Turn off the modem for at least 20 minutes... more won't hurt

  Turning off time Capsule

  Make sure the Ethernet cable from the modem connects to the "O" on the Time Capsule WAN port

  After the 20 + minute modem switch off period has finished, turn on the modem and let it run for 10 minutes

  Then, turn the time Capsule and let it run for 5 minutes

  On your MacBook Air...

  Open AirPort Utility... (Finder > Applications > utilities > AirPort Utility)

  Click on the image of the time Capsule

  Click on edit in the window that appears

  Click on the network at the top of the next window tab

  Make sure that the setting of router Mode = DHCP and NAT

  Click Update at the bottom right of the window and give the time Capsule a minute full to restart

  Recheck the network and report on your results

  Unfortunately, the SB6141 and Apple routers not always who hear well together, so keep an eye on the issues