Connect an Ipod to a laptop by a USB cable

Similar Questions

• trying to connect my ps3 to my laptop via a hdmi cable

  Im trying to connect my ps3 to my laptop via an hdmi cable, but nothing happens

  What can I do?

  Hi mezilla,

  Please see the post below with a similar problem and fix possible:

  http://boardsus.PlayStation.com/T5/PlayStation-3-General/how-to-connect-PS3-to-Windows-Media-Center/m-p/38640141

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• How to connect a HDD Momentus 5400.6 via a usb cable

  I am trying to recover data from an internal Momentus 5400.6 hard drive that was installed in a laptop ASUS who died recently. I connected the hard drive to another computer laptop pc under Win 7 sata to a usb cable. But when the system tried to install the driver that a failure has occurred. Through the Device Manager the drive appeared in the list of usb devices with an ASMT1051 tag, but with a yellow triangle with an exclamation point and the properties that "this device is not configured correctly. (Code 1) ». I tried to correct the problem by following a post suggesting to delete infcache.1 file in the c:\windows\system32\drivestore subdirectory and then restart and reinstall the hard drive, but that has not fixed the problem. Does anyone have any advice or suggestions on how to fix this problem?

  Hi again Isha,

  Thank you for continuing to read and answer all my dilemmas. My printer is a HP LaserJet 1100. The symptoms were it seems to load the driver ok, no harmful looking for signals through the Device Manager. When I printed a document if the print queue shows the document sent to the printer, but the printer just sitting there - no impression ensued. I tried attached to different usb ports, but nothing seemed to work. I noticed that there are 2 different printers available for printing of property. But neither the printers when selected would be to print a document. So I uninstalled the printer, rebooted and tried again. This time, it seemed to work ok. There was only a printer connected to the system and printed OK.

  I don't know if the condition to have 2 printers was caused by the setting of the printer on a different port or not.  I usually disconnect the printer until I need to print anything because of my 'office' layout So it appears I have my system back up and running as usual.

  Thanks again for the hand holding ;-)

• How can I connect my camera to the pc with my USB cable

  312

  Connect the cable to a USB port on a PC with the iPhone connected to the other end of the USB cable.

• HP Deskjet 3515: Connection HP Deskjet 3515 to the network without USB cable

  Nice day

  I just changed networks and the need to install my HP Deskjet 3515 to the new network but I can't find my USB cable.

  Is - it possible configure the printer on my new network without USB cable?

  Thank you

  GatZza

  Hello @GatZza,

  Welcome to the HP support forums.

  I appreciate that you try to put your Deskjet 3515 on your network wireless without router.

  I would like to help.

  I got the following information from the Printers manual.

  To get started with Direct wireless printing

  1. to use live wireless, you must turn on Direct Wireless Control Panel and get the wireless
  Direct name and password if you have directly on wireless security:
  a. on the home screen, tap on wireless and then select settings.
  b. If the display shows that the wireless is turned off, select live wireless, then on (No.
  Security) or we (with security).

  NOTE: HP recommends that you turn on Direct wireless security. If you turn on safety, only
  users with the password will be able to connect wirelessly to the printer. If you disable security,
  anyone with a Wi - Fi device to the printer WiFi range will be able to connect to the printer.

  c. Select the display name to display the name Direct wireless.
  d. Select Show password to display the password Direct wireless if you live wireless
  Security on.

  2 from your computer wireless or mobile device, Wireless Tower, find and connect wirelessly
  Direct name, for example: 3510 HP-Print-XX-Deskjet series. If you have Direct wireless security, enter
  Direct wireless password when you are prompted. Then print as you normally would from your computer or mobile
  device.

  Open the integrated via Direct wireless Web server

  1. from the home screen, press the wireless button, and then select settings.

  2. If the display shows that the wireless is turned off, select live wireless, then on (No Security) or
  On (with security).

  3. from your computer wireless turn wireless on, to search and connect on behalf of live wireless, for
  example: series HP-Print-XX-Deskjet 3510. If you have Direct wireless security, enter in the wireless
  Direct password when you are prompted.

  4. in a browser supported on your computer, type the following address: http://192.168.223.1.

  When you reach the EWS printers, you should see an option to run the Wireless Setup Wizard.

  Run the wizard, and then follow the prompts.

• I can't use my WIFI. I need to connect my iPhone to my computer via a USB cable. What should I do to connect without cable?

  I have the iPhone4 and am running Windows Vista on my Dell computer. The only way I can connect my computer to the internet is using a USB cable from the phone. It's not always easy, but I do not get a connection in any other way.

  Hello

  (1) you are trying to connect to Internet via iTunes?

  (2) is iTunes iPhone detect when the wireless connection?

  (3) you use iPhone to access the Internet?

  Check out the links that can help you further in the question of fixing.

  iOS: Internet connection

  http://support.Apple.com/kb/HT1695

  http://www.Apple.com/support/iPhone/Internet/

  Hope this information helps.

• Is it possible to connect the HP Photosmart C4780 Wireless printer without USB cable?

  Hello

  My family and I recently moved and while moving, something inevitably get lost or left for account.  I am fighting to get this printer and will so I don't have to bother people at the front desk at school to print my documents for me.  I have lost/misplaced both the HP Photosmart C4780 printer software disk and the USB cable.  I have no idea where these things are and have not found them within two months, we've been in the new House.

  I solved the issue of the loss of the installation disk by downloading it from the HP site.  My problem is now getting beyond the USB connection and get the currently installed software.  Because I run on a MacBook Pro, it always tells me that I need the USB key to continue the installation.  I'm on a Verizon Wireless router, and I even tried to find the printer on my wireless network with no luck.

  Help, please!

  Thank you.

  It's the type of cable you will need (ignore the color of the cable, the ends are the important part).

  

  Have a new router is not a problem, but remember the SSID and password wireless exactly, otherwise it will not work (if you decide to try Method 1). It's a bit like "trick" your printer into thinking that your new router is your old a long enough to configure the network settings for the new (desired).

• BAD_POOL_HEADER appears on the blue screen, when connecting iPod to the laptop.

  Original title: when I connect my ipod to my laptop it causes BSOD.
  When I connect my ipod to my laptop I get BSOD immediately.
  I have contacted apple and crossed a complete uninstall of all drivers and apple software and reinstalled the
  The BAD_POOL_HEADER message appears on the blue screen

  Here is a link to my mini dump files https://skydrive.live.com/redir?resid=94CB07B8AE683786! 1528 & authkey =! AKjmzpZFrK-YvWI

  Thank you, I managed to fix it by doing a system restore to last week.

  Thank you very much

• OK so I connected my iPhone 5 s for my Macbook Pro with a USB cable, but the system settings it is NOT CONNECTED, even if it triggers iTunes to open. Do not get internet connection on the MAC how come the system settings shows USB not connected

  I connected my iPhone to my Mac using a USB cable, but the Mac connected USB not appear, even if iTunes opens

  The Mac has no network to the internet via a port USB, WHY NOT?

  Where in the Panel are you looking for? And what you're trying to do with the phone? Transfer files? Share an internet connection?

• K3 Note connection to the tv via a usb cable.

  My note lenovo k3 does not connect to my LG LED TV with a usb cable, I m trying so many times, but it always shows this usb device not connected.plz help me

  Note from the admin; phone added to the subject type

  K3 phone didn't come with the support of the mhl so I advise you to try to connect your phone to chrome cast device hope this helps.

• How can I connect my 1Connectez 1st generation iPod (original iPod) to a laptop

  I have an original iPod and it has a screen old port how to connect it to a laptop and they don't have these kind of show ports more

  Not sure what you mean by "display port"...  The dock connector of the original iPod (2001) is a FireWire port.  You really have an original 1st gen iPod, with a (not key or click) scroll wheel that physically turns a circle?  Looks like this

  

  If so, it can connect to a computer equipped with a FireWire port .  To do this, not to connect to a USB port.  There are "scam" products that claim to be a USB-to-FireWire adapter cable, but they don't work; they can even cause damage to the iPod if used.  FireWire and USB work very differently (and even use different power supply voltages); You cannot connect them just by changing the shape of the connector.

  If your computer is a Mac (no FireWire port) with a Thunderbolt port, Apple sells a Thunderbolt-to-FireWire adapter.  On a Windows PC, to connect to the 1st (or 2nd) gen iPod, you add an expansion card of a certain type that provides an actual FireWire interface.  For more details, please provide more information on your situation.

• Impossible to copy or upload Photos from the iPod to the laptop

  Hello.  Because I've recently updated my software (around the week of 09/12/16?) on my iPod Touch (iOS version 10.0.1) and iTunes on my laptop, I was unable to copy and paste pictures of my iPod on my laptop.  Before I could access my iPod similar to an external (E: /) cross Start/computer, double-click on "E: / drive", then follow from there.  My laptop running 'Windows 7 '. When I contacted Apple they could not directly solve the issue, suggesting I acquire a "drop" or use "Facebook" as a gateway to transfer? I downloaded transfer 3rd party software that works, however, I will ask you to purchase a license after the 7 day trial period.  I noticed others in the 'Microsoft community' have experienced the same problem, and tried the 'auto play' suggestion without success.  Any help would be appreciated.

  Post proposed by the facilitator for the appropriate forum placed

  Usually, you must allow the computer to access your Apple device when you connect it. See the following article:

  How to connect and browse your Apple on a 10 Windows PC devices

  References Windows 10, but the same instructions should work for Windows 7 too.

• Connect an iPod to an Android Ultra HD TV

  Is possible to connect an ipod touch 6G in os x 10.0.1 to Android from Sony TV.

  I would like to display or mirror of my photos on the big screen and maybe control my TV with iPod.

  So far I was able to get my ipod to connect using wi - fi or bluetooth connection it search but does not connect.

  Hope someone has a suggestion or can tell me if it is not possible to do.

  Iain

  You can get an Apple TV and that you connect to the Android TV and use AirPlay.

  You can also get a cable that connect to the lighting of the iPod port and television. See:

  On AV adapters digital Apple for iPhone, iPad and iPod touch - Apple Support

  Some applications can be supported using the dongle Chromecast connected TV to "throw" the apps screen on TV.

  I don't kknow not if your TV supports Chromecast directly without using the dongle Chromecast

• Problems to connect the Ipod to Itunes after update 12.4.6.1

  Hello people,

  I just installed the new update iTunes (Version 12.4.6.1 for 64-bit Windows), once more a new provision which made it very confusing. I just tried to connect my iPod Touch (old enough) to sync my new music but the device does not appear on iTunes anywhere. I use the same yarn I used two days ago and it worked fine and has done for over a year as I tried a different lead but still no joy. The device is recognized by my PC as it starts to load connected as well as it appears in the folder 'My computer' which has an icon indicating 'Device Apple'. Any ideas on how to work?

  Thank you very much

  Jason

  Restart the AMDS > restart the Service of mobile Apple (AMDS) on Windows - Apple Support

• Bluetooth speaker no connection with iPod 5th generation

  Once solve you one problem, another pops up...

  A little more than a week ago, I bought an iHome iBT3, which is a protected against splashing, triangular-shaped speaker. It has bluetooth, which I used about three times now and it was working fine until today.

  The other day I had a problem with my iPod which translates into me trying the three methods; force reset, recovery of the device and reset all default settings. Although I have fixed my previous issue, when I tried to connect my speakers today, connected devices emerged as two things that I had never seen before. I chose the setting for iPod to 'forget' the devices and tried to connect my speakers.

  I watched for 15 minutes. The speaker tried to connect and connect and connect the iPod has tried to find the device, and they never linked between them; my iHome does not appear on my iPod and my iPod never read that there is a device in the region.

  I tried to force the delivery twice, the iPod and it has nothing and if it should happen again, I really, really don't like to restore my iPod because it took me two days and multiple handfuls of hair to do such a thing.

  Can I do to get my two devices to connect with each other?

  Thank you in advance.

  Update: The speaker is not connecting to my or my sister iPods.

  My father has a similar Bluetooth speaker if and which connects both of the devices.