"CONNECT BY" in ODI. Transaction for the entire scenario

Similar Questions

• implementation of the Hosts file on the server for the entire network?

  I see a lot of information on how to edit the local Hosts file on individual computers. But, is it possible to edit a Hosts file and have effect throughout the network?

  We have a network of a little over half a dozen of Mac mini, who take their DNS information from another Mac Mini running the application server OSX (under El Capitan). This server is the primary DNS machine for the network. I want to implement a Hosts file for the entire network.

  Parental control seems to be broken in OSX El Capitan, so this seems like the best next to us, short option to buy some third-party service, which I prefer not to do.

  I think that dnsmasq installation on your Mac server and configuration of all your computers to use as your "DNS Server" will achieve what you want.

  See osx https://oracle-base.com/articles/misc/dnsmasq-for-simple-dns-configurations-mac-

  Why do you feel you must do this?

• How can I make a cell formula will apply for the entire column? For example D2 appears B2 - C2. How can I copy this formula for each cell in the column?

  How can I make a cell formula will apply for the entire column? For example D2 appears B2 - C2. How can I copy this formula for each cell in the column?

  If you want the formula is the same (B2 - C2) in the cell of each column you must change it as ($B$ - 2$ C$ 2). Then copy it, select the whole column and paste.

• How can I delete a file on my iOS device that I downloaded from my iCloud? I just want to keep the Preview on my iOS device without using my storage iOS for the entire file.

  How can I delete a file on my iOS device that I downloaded from my iCloud? I just want to keep the Preview on my iOS device without using my storage iOS for the entire file. This means that the file is still in the iCloud and available to be downloaded to any device.

  In practice, I want to be able to scan and download through my documents located in my iCloud and once I didn't need them on my iOS device I would like 'load their return to the cloud' to my storage of the iOS device is not used.

  Thank you in advance to the community!

  Max

  The only way I found to do that once a file has been downloaded is to remove it and add it again through either from Finder on Mac or iCloud.com.

• I have a few sequences where I don't have the option to adjust the Pan for the entire track. How can I get this panoramic option whole track?

  I have a few sequences where I don't have the option to adjust the Pan for the entire track. How can I get this panoramic option whole track?

  With an Adaptive track you get a balance option, with a standard track, you get an option of pan.

  It is the option in the track mixer.

  

• Is it possible to be charged for the entire year instead of monthly?

  Is it possible to be charged for the entire year instead of monthly?

  Hey, Francine.

  Please reach out to the Adobe Customer Service because they would help you with the same.

  Contact | Adobe

  Kind regards

  Ana Maria

• A SCN for the entire database and the different SNA for the data files?

  DB Version: 11 g
  
  I always thought that there is a unique SCN for the database as a whole.
  A quote from the link below as
  When a control point is completed, Oracle stores the RCS individually in the control for each data file file
  http://www.dbapool.com/articles/1029200701.html
  
  
  What does that mean? There is a SNA for the entire database, and there are individual SCN for each data files?

  Well, unfortunately, the article says more bad than good things. Or if I can't call them wrong, they are rather confusing and rather than clear things for the reader, its making them appear to look more confused.

  First things, YVERT is used for read consistency (CR) mechanism and the backbone of the notion of Multiversioning. The control point is the mechanism to help that recovery is decided. Contrary to what said article, not any kind of checkpoints update both the data file and the control file, and also, there is not a type of them as well. In addition, the article says that the LAST_CHECKPOOINT is set to NULL, while its actually set to the infinity since it is not possible to detect the moment when the database is opened, that the last issue of control over the file would be. In the case of complete control point, this number is saved and is also associated with the toa Controlfile own database leader at the next startup. If this is not the case, there is an inconsistency in the stop_checkpoint of the data file and the stop_checkpoint reocrded in the control file, leading to a recovery of the instance.

  There are several types of control points. Similarly, there are several types of SNA as well. Without going into the details of these, IMO, the article simply means that when the control point write over a file passes, oracle updates the file checkpoint on it and this is recorded in the Controlifle. as well.

  HTH
  Aman...

• Pictures killing an internet connection for the entire network in El Capitan and Sierra (solution)

  I hope this helps someone out there.  It took a lot of research and trial and error to figure.  It's a solution and not a question, moderators, please put this in the correct area - I'm sure that's probably not the right one.

  QUESTION: My Internet crashed and this was the situation for several weeks.  I used a hotspot from my phone for connectivity, it was so bad.  If I want to run a speed test, she would record .03Mbps.  Company Internet is out (twice), replaced new modem, dial-up, everything.  Modem became a signal strong, but it was not to reach all devices.  Literally spend days trying to understand this - constant speed running test.  Type a chance, but I noticed that if I turned off my wi - fi, my other devices to get internet antenna full.

  This is my note to the At & T internet tech:

  «I realized the problem - it's a mac question.»  If you see this once again, it's how to diagnose.  If they have a mac running El Capitan or Sierra (both latest versions), it will be a feature for the Photo program that attempts to download all your library - and sometimes loops constantly (this is the bug). When that happens, it will take ALL the bandwidth and choke the internet.  The way you can tell, if you turn off the WIFI antenna on the mac and the speed goes back to normal on all other devices.   You can see if you look at the activity monitor - the Application folder-> utilities-> monitor program - > Network tab.  You will see a function suck bandwidth, called NSURLSESSIOND.  Immediate fix is to run the PHOTOS, click on the PHOTOS-> PREFERENCES-> TAB, either "iCloud library" iCLOUD deselection or pause the update photograph (it does for 24 hours).  Network activity will return to normal, resolved to connectivity issues.  NOTE: you'll still the problem, if connect you the computer to the modem, wifi so isn't the issue. »

  I hope this helps someone!

  Interesting, but I didn't and isn't the problem with El Capitan or Sierra on more than a Mac. It takes some time to download a large Photo library according to your connection speed. I never knew 'loop' a Photo. Maybe some have. Could be a bad installation.

• TCP.invited_nodes settings for the entire network

  
  I have a test 11.2.0.4 DB which will eventually become a production DB. I am applying the MARINE DISA to. One of the parameters is to use either the Oracle connection manager or apply tcp.invited_nodes. I have about 100 computers that will access the DB via their client software. What is the best way to apply control STIG. I can't foresee adding all 100 ip addresses in the sqlnet.ora file. Thank you.

  Emad Al-Mousa wrote:

  Hello

  I don't think that 1000 hostnames in your file sqlnet can be easily. If your objective to protect illegal database access, while they cannot access unless you have the name of user and password to one account in the database.

  But if someone does not have the credentials (for the argument, let's say he stole their) he can get to the database from anywhere if the network routing allows.

  And, uh, the OP said 100 jobs, not 1000.  This fault of typing is an order of magnitude difference.

  I feed the pain of the OP.  I also had to deal with the DISA STIG spotted requirements which, in this case, are very short.  Secruity level network (for example invited_nodes of tns) should really be done by the router/firewall. TCP.invited nodes requires constant manual adjustment.  Suppose we go to the effort of registering manually the IP 100.  (The parameter even that accepts several?) One could assume that those are the addresses of the workstations that receive their address from the DHCP server.  So as soon as the administrator creates the list, it starts wrong as data workstations will receive new addresses.  And they will receive them often.  Also, the same environment that requires this solution requires that all windows machines apply to all windows updates "immediately".  So every Tuesday you get a group of workstations is restarted and quite probably get new IP addresses.

  Not to mention the new machines to come on the line and old machines being purchased - all without notifying the ADMINISTRATOR to update its list.

  To the op.  In the light of what I have described above, if your list of 100 workstations all in the same subnet, your job is actually quite easy.  You just need to crack coding these 100 addresses.  You could do it now.  To avoid the question of maintenance I have indicated above, you want to go ahead and list all * addresses of potential.

• How can I put bleeds for individual images (not for the entire document)?

  Hello everyone,

  I have a ready brochure for printing and now I had information on some images ago 3 mm lack of bleed. How can I fix this? The entire document should be set to this purge, but they always tell me that, in some places (images), he is still missing.

  Thank you much in advance.

  You must bring your images for objects that purge leave the allocation of purge and make sure that the image is big enough to fill this area.

  

• AF:table columns are required for the entire table space.

  Hello
  
  I use a certain controls fast query table. Some tables have only one or two columns displaying data.
  It is necessary that in such a case, avoid any white space after the columns.
  
  I tried setting for each column width to 50%, but it gave no results required in firefox 4.0
  
  I use JDeveloper 11.1.1.4.0.
  
  The only option that seems to work is to specify the width of the column in pixels. It's the last thing I like to do.
  
  Is there a styleClass or any other better alternative?
  
  Concerning

  for the game of table the styleClass as "AFStretchWidth" - which would ensure that it occupies the entire width.
  and use columnStretching as required.

  Sample:

  
  fetchSize = "#{bindings." Departments.rangeSize}.
  emptyText = "#{bindings." Departments.Viewable? "{'No data to display.': 'Access Denied.'}".
  var = "row" value = "#{bindings." Departments.collectionModel}' rowBandingInterval = '0 '.
  selectionListener = "#{bindings." Departments.collectionModel.makeCurrent}" columnStretching ="last"
  'unique' = rowSelection styleClass = "AFStretchWidth" >

  Thank you
  Nini

• Privileges of connection Page error - insufficient apps for the current operation

  Hi gurus,
  
  We migrated application of HP-UNIX SUN Solaris with 11.5.10.2 node and 10.2.04 database. When I try to connect as a sysadmin, got the error that you have sufficient privileges for the current operation.
  
  But I can't able to go with forms URL and it works. I don't see any errors on the EEA with the exception
  Fatal error in the analysis of the recording file in jserv.log device.
  
  Any help is appreciated.
  
  Thank you.

  I got the invalid objects in the APPS schema

  Could you please list these objects? At least those that begin with FND and AD %

  Thank you
  Hussein

• Connect a printer non-airprint for the Airport express

  Can I use an express train from the airport as a stand-alone wireless network to allow printing from an IOS device.  I want to connect an AirPrint not printer to the usb port on the Express with no ethernet cable is connected and so no internet and use it as a printer from an IPhone?

  My main questions are

  1. a no AirPrint printer allows printing from IOS using the Airport Express Terminal

  2. If so, the Airport express can not be connected to the internet?

  Thanks in advance.

  1. a no AirPrint printer allows printing from IOS using the Airport Express Terminal

  Actually, no. Connect a non-AirPrint printer to the USB port on the base station will NOT make it capable AirPrint. In order to print from a device iOS on this printer, you need to a third party (such as the Printopia) application running on a Mac.

  2. If so, the Airport express can not be connected to the internet?

  Function of the Express print server does not have Internet access at work. In other words, you can have the Express create a local wireless network, connect a USB printer and share the printer on the LAN. However, yet again, if the printer is capable non-AirPrint, iOS devices will not be able to print directly to it.

• Qosmio G30-201 connected to LCD - how to fit the entire screen?

  Hello

  I have a laptop Qosmio G30 - 201 and also using a Toshiba WLT58 32 inch widescreen LCD with a HDMI connector.
  I'm trying to get the film that I am looking to fill the entire screen and give up the borders.
  Is this possible?
  See you soon

  Steve

  Hello

  Have you checked if there is an option in DVD player software that allows you to watch DVD's? Please check!

  In addition, you can view the properties of the graphics card NVIDIA-> advanced settings.
  You will find a tab called GeForce Go.
  You you must open the table on the side left which provides useful options.
  Go into the settings of device-> adjustment of the device.

• Full screen for the entire work area (not 1 module)

  Hi guys,.

  Is it possible to activate the mode full-screen for the work in first Pro CC, as well as Shift + F area how for Lightroom? Tilde and ctrl + tilde does full-screen for the selected module. I want just the complete workspace in sight.

  CTRL + \.