SegmentedControl fires that event when they are hit, not when you drag

Similar Questions

• Disable the popup info when you drag the layers? (Photoshop CC)

  There is a small box that opens when you drag layers in Photoshop CC which shows the information of the unit (pixels, inches, etc.) when you drag a layer. I don't need and I find it embarrassing. I can't find any option to turn it off. Y at - it all?

  Yes, there are, but make a note of this in case you have need enabled in the future. This is a HUD (Heads Up Display) that allows to display transformation values in front of you while you adjust without a glance at the same values in the Info Panel.

  Edit menu > Preferences > Interface > values see the Transformation: never

  stop him.

  Gene

• My Manager of CC says that applications are installed, but they are certainly not!

  My Manager of CC says that applications are installed, but they are certainly not! What can I do to install them for real? I can't find a "Uninstall button" to revive the download later, applications not being in my folder of the Application. (Mac)

  HI , petronilleb,

  Please follow the article: CC Office lists the applications as "up to date" when the no installation not solve your problem.

  Let us know for further query.

  Kind regards

  Yann Arora

• Delay of the dialog 'Copy the file' when you drag a file to a folder that already contains.

  Delay of the dialog 'Copy the file' when you drag a file to a folder that already contains.  The dialog box only appears when that I disconnect.  In fact this problem can seriously mislead the user. The file has been copied to or not? This is a serious shortcoming of the operating system.
  A similarly delayed dialog box is to join files on a send to the recipient of the message.

  What is the cause of the delay? Dialog boxes are not under other windows - they break on screen as I log out.

  When I drag AGAIN the same file in the same folder, then I get a message that "the action cannot be completed because the file is open in another program.  (No doubt the program who was trying to copy in the first attempt and waits for a response to the dialog box may not show me!)

  Hardware: Computer laptop Asus M70.  VISTA Ultimate with the latest patches.

  Lorien, thanks for your response.
  A lot of time and effort was exercised in an attempt to find out WHY. I wanted to not just fix the symptoms. It concerned me greatly as a basic function of the operating system does not work. He was not fit for purpose. In the end I found that a third-party application compromised of WINDOWS VISTA 32-bit operating system. If an operating system can not reliably inform the user that an operation is successful or not, it is worthless. In the case above, I didn't move the files was a success (no response required) or the delayed response until I signed.

  In addition to the original problem, there was the following problem: http://social.answers.microsoft.com/Forums/en-US/vistanetworking/thread/24068518-31e0-4b23-823b-d54882792301 where "send to..." 'Recipient' disable the context menu in Explorer for JPG does not or not broken.

  Finally, I figured out the following error had something to do with my problems:

  Description:
  The server {AB8902B4-09CA-4BB6-B78D-A8F59079A8D5} is not registered with DCOM within the required time.
  

  -

  -

   

   10010

   0

   2

   0

   0

   0 x 80000000000000

   

   198817

   

   

   System

   ASUS_M70VM

   

   

  -

   {AB8902B4-09CA-4BB6-B78D-A8F59079A8D5}

   

   

  Arriving in my solution, I was inspired by the following articles http://blogs.technet.com/markrussinovich/archive/2006/08/31/453100.aspx     http://blogs.technet.com/markrussinovich/archive/2006/11/27/532465.aspx
  So I downloaded the MS debug tools and confirmed my suspicion of dllhost.dll using REGEDIT to set debugging on that.
  To cut a long story short, it's DivX 7.2 which caused me grief.  In particular, the file DivXDecH264.ax 'has an access violation - code C0000005 (first chance).  It has been autonomous in DivX Plus DirectShow Filters.     Thus, when it has been deleted (starting other Articles to original install DivX) through Control Panel of configuration/programs and features my system worked perfectly well.

  I know SFA on the architecture of Windows but why was this DivX file loading and cause an access violation whenever I used the windows Explorer?  How an operating system may fail in a basic function of by a third party issue?  There are some newspaper where this access violation was recorded?  It was only possible to identify it in debugging?

  What you fella?

• How to disable programs and commissioning that run when you start Windows 7

  How to disable programs and commissioning that run when you start Windows 7

  Hello

  References to Vista also apply to Windows 7.

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135

  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062

  To see everything that is in charge of startup - wait a few minutes without doing anything-
  then right click on taskbar - task manager - take a look at stored by -
  Process - Services - this is a quick reference (if you have a little box on)
  Lower left - show for all users, then check that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  Is a quick check to see who are loading method 2 - using MSCONFIG
  then after a list of these here.

  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out what files, registry keys, and other objects
  processes have open, which DLLs they have loaded and more. This unique
  powerful utility will show you even owned by each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically
  When your system boots and you connect. Autoruns shows you the complete list of
  Locations of registry and files where applications can configure start automatic settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  Monitor Monitor - free - file system, registry, process, thread and
  Activity of the DLL in real-time.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  WhatsInStartUP - free - this utility displays the list of all applications that are
  loaded automatically when Windows starts. For each application, what follows
  the information is displayed: Type of startup (registry/Startup folder), Command - Line
  Channel file, the product name, Version, company name, location in the registry or
  file system and more. It allows you to easily disable or remove unwanted programs
  that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe
  not. The window Watcher says it all, every window created by each execution of the statement
  program, if the window is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.

• I have several purchases through the iTunes Store on my bank statement and I don't know what they are for. Can you help me? Cannot maneuver through this system to see the purchase history.

  I have several iTunes Store purchases that appear on my bank statement and I don't know what they are for. Can you help me? I'm unable to maneuver through this system to view previous purchases.  I wonder if I pay for extra storage, it is always advising me that I'm pretty sure.

  Hello

  Open iTunes on your Mac and click your name (if you are not signed in, then sign to see your name). Then click on account information. Once you enter the account information screen, you will see a section called historical of purchases. Click 'View all' to see the list of purchases and the ability to watch the dates more.

  See you soon,.

  GB

• Hi all, I keep is typed in the password at startup box, in bars in safari and firefox coupled with a stuck key noise that stops when you press a key, I scanned with antivirus that seems clear, can anyone help?

  Hi all, I get a storm of +'s typed in the password at startup box upward, in bars in safari and firefox coupled with a stuck key noise that stops when you press a key, I scanned with antivirus that seems clear, can anyone help?

  Clings in the key on the keyboard? Wired or wireless keyboard?

  Try to run this program, copy and paste the result in a response. The program was created by Etresoft, a regular contributor.  Use please copy and paste the screenshots can be difficult to read. On the screen with the Options, please open Options and tick the boxes in the bottom 2 before the race. Click on the button "Report share" in the toolbar, select "Copy to Clipboard" and then paste into a response. This will show what is running on your computer. No personal information is shown.

  Etrecheck - Information System

  Reset an Apple Bluetooth mouse or Trackpad wireless keyboard (pairings and other common troubleshooting problems)

  Restart your computer, hold down the option/alt - P - R keys command before the gray screen appears. Continue until you hear the startup chime for the second time.

  Reset the NVRAM EXTRA memory

• How can I get rid of the box that appears when you start Firefox 'Restore previous Session'?

  How can I get rid of the box that appears when you start Firefox 'Restore previous Session'?

  Subject: House is the default in Firefox 4 home page - look at the address bar containing the addresses of web page - it is the container for Google search, with a 'extract container' and below these elements is the Previous Session Restore button. It's not the same homepage that previous versions of Firefox used (although it is similar in appearance), it is a 'local' page that won't load the Internet.

  Set this page as your home page, which is what Firefox 3.6 and earlier versions had for the default home page. He has Previous Session Restore button/link.
  
  http://www.Google.com/Firefox

• WNR2020 - setting up the Web page that appears when you can access the guest network

  Someone knows how to set the Web page that appears when you access the network of comments? I use the WNR2020 router. Thank you very much.

  It can be done by using a different material.

  Above all, you will be able to find this feature in our product business and it's called the HTTP redirect.

  You can check some Points of access such as WAC720, WAC730.

• A red circle that appears when you miss a phone call will not go away? Any ideas?

  A red circle that appears when you miss a phone call will not go away? Any ideas?

  Hello

  If I am not mistaken, you see a red circle when you miss a phone call that you would like to go. If this is the case, you can simply open the app phone on your iPhone and wait 10 seconds, and then return to your home screen. In doing so, the iPhone think that you have viewed your missed calls, once you see the red circles will disappear. If you're still having problems, this can be a problem and a simple reboot will help. Here's how you can restart your iPhone:

  • Press and hold the sleep/wake button until the Red slider appears
  • Drag the slider to turn off your iPhone
  • Once the iPhone is off, press and hold the sleep/wake button until the Apple logo appears.

  I hope this helps.

• How do access you the list of programs that start when you start your computer?

  How do access you the list of programs that start when you start your computer?

  Saturday, January 19, 2013 19:48:16 + 0000, Psylly wrote:

  How do access you the list of programs that start when you start your computer?

  First of all, note that you should be concerned all the programs
  starts automatically, not only those who enter in the system tray.
  Not all the programs auto-start manifesting by an icon in the
  Status bar.

  On each program, you don't want to automatically start, check its
  Options to see if he has the choice of not start (make sure you)
  Indeed choose not to run, not just a "don't show icon.
  Optional). Many can easily and better be arrested like that. If that is not
  work, run MSCONFIG from the start. Run the line, and then click the Startup tab.
  Uncheck the programs that you do not want to automatically start.

  However, if I were you, I wouldn't do it just for the application of
  the minimum number of running programs. Despite what many people say
  You should be concerned, not with the way that a lot of these programs
  you run, but who. Some of them can degrade performance severely, but
  others have no effect on performance.

  Don't stop all programs to run willy-nilly. What you need to do
  is to determine what each program is, what its value is up to you which
  the performance cost is its running all the time. You can try
  Internet search and ask questions about the details here.

  Once you have this information, you can make a smart informed
  decision on what you want to keep and what you want to get rid of.
  Ken Blake, Microsoft MVP

• What I need to know is the name and location of the executable that runs when you click on detect monitors in the menu screen resolution of windows 7?

  Original title: name/location of the executable that runs when you click on detect monitors?

  What I need to know is the name and location of the executable that runs when you click on detect monitors in the menu screen resolution of windows 7?

  Hello

  Your question is better suited in the MSDN forums. Please post your question in the MSDN forums.

  You can follow the link to your question:
  http://social.msdn.Microsoft.com/forums/en-us/categories/

  It will be useful.

• catch the event when you click on the cross of closing

  Hello

  How you catch the event when you click on the cross of closing?

  Thanks in advance,

  Fred

  Discover the reminders of events management of window on page 122 of the Guide to Javascript Adobe pdf tools.

  You want something like:

  myWindow.onClose = function() {}

  your code goes here

  };

  or

  myWindow.onClose = myCloseFunction;

  function myCloseFunction() {}

  your code goes here

  }

• Is it possible to hide the yellow box that appears when you scroll over any object on the form?

  Is it possible to hide the yellow box that appears when you scroll over any object on the form? This box contains the name of the element or the legend.

  This one can be deleted in the Accessibility tab (press SHIFT - F6).  There is an option "Screen Reader priority", he set to None.

  Bruce

• Lightroom CC change picture when you drag to second monitor

  I did research on this problem everywhere on the net and I can't find what I'm doing wrong.

  I use Lightroom CC on my laptop (Acer R13) and also via HDMI connection a second monitor.

  The second monitor is a monitor Eizo CG277 I calibrated using its own built in sensor.

  I created a profile for the Eizo monitor that displays images identical to those displayed on the screen of the laptop.

  The problem I have is that if I open lightroom on any one of the monitors and then do drag the window of lightroom on the other monitor, lightroom changes the appearance of the photo. Usually contrast and saturation decreases when going from laptop to the Eizo monitor.

  I shoot in raw and I am aware of the fact that lightroom initially displays jpeg shipped my camera and then make the raw file. The problem that I occurs after the raw file has been made and btw, after I generated the 1:1 previews.

  In fact, the problem occurs with any file, even JPEG files.

  The most interesting thing is that if I drag windows from one monitor to the other lightroom and keep the mouse button pressed the picture is unchanged and shows exactly the same as in the monitor where I dragged the window from. As soon as I release the mouse button and move the window, then the changes are applied.

  This happens in one of the lightroom modules but does not occur when you drag the photos in other applications (same color managed ones).

  Does anyone have any help please?

  Hi Chtauz,

  Please try to apply the profile default sRGB on both monitors. See profile monitor corrupted and calibration - color problem of Lightroom with secondary - monitor photograph battery Exchange display

  Here is thread detailed which may help to the color management dual monitor?

  Let us know if that helps.

  Kind regards

  Assani