Connect HP computer for my Inspiron 23 via dvi to hdmi

Similar Questions

• Vista goes to 50% CPU usage and connects the computer for hours after the beginning

  Original title: Vista processor

  Stupid Vista goes to 50% CPU usage and connects the computer for hours after the start.  Cannot run anything with any request of CPU without getting bogged down and crashing.  It is not windows defender, I suspend this service and the machine is ok for another 1/2 hour, them I'm up to 50% of the CPU.  The idle process said Task Manager is > 90%, still indicates 50% CPU usage and the cooling fan looks like a 747 taking off.  Should I just pull the machine and go for Linux, or what?  Cannot run games or whatever it is, totally disgusted with vista of POS and microsoft can it Deep and do not get windows 7, it is probably worse.  Is that all I can turn off to get the same performance than, say, windows 3.1?  It would be preferable to the current situation.  MSCKMA.

  Hello

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  ----------------------------------------------------

  Follow these steps:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out what files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ===========================================

  Refer to these discussions because many more excellent advice however don't forget to check your antivirus
  programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
  first.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

  Hope these helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Windows 7 Home Premium does not start and an external monitor connected via DVI to HDMI Cable

  I have a Dell Inspiron 531 desktop computer with a NVIDEA GeForce 8400 GS video card.  This video card has the following outputs: DVI, VGA and S-video.  When I connect it to my computer via the VGA port to PC to my Sony Bravia KDL-40XBR4 monitor port, the machine starts perfectly.  If I connect via a HDMI cable to one of the HDMI monitor DVI ports, the screen displays the video BIOS, but turns black when the operating system begins to load.  If I connect another monitor to the VGA port, yet once the machine boots fine, but if I connect the monitor to the computer and the Sony Bravia, once again the machine does not start.  The strange thing is that if I boot with only the connected computer screen and then plug the DVI to HDMI cable, then Windows 7 sees the Sony Bravia monitor very well, and I can extend the desktop.  If the machine mode 'sleep', both monitors work very well to wake up the PC.  So, if the Sony Bravia is connected alone or with the computer screen, the machine does not start (the screen will display 'go black' when the OS starts to load.)  I tried to run Windows in Mode safe, but he won't either.  I have all the updates of Windows applied and have installed the latest drivers from nVidea so.

  Hey Chris,

  First of all, about climbing, is not a technical support; This is a community forum where MS moderator and contributors are involved.  Now to your question ~

  It's very strange that the PC does not start when this unit is connected, but works fine when connected after the fact.  I've seen several cases where a hardware configuration of uinsusal will prevent a PC to boot.  I think that the culprit may be DVI to HDMI Cable that you are using.  If I were you, I try to connect the PC to a DVI monitor and see if it boots normally.  Also, see if the monitor can prevent another PC to start when it is connected directly via the HDMI.

  Good luck! Let us know how it turns out.

• I tried to connect via / DVI to hdmi and it does not wrk

  If I have vga and dvi on my screen but only vga on my computer is - it say that I did not compatible computer to run hdmi to my screen?

  Hi lastace,

  If your vga port is blue, this means that it is a D - Sub connection.

  With D - Sub, you can buy a connector which can convert the output D - Sub to DVI, but unfortunately, not HDMI.

  So in your case, you can connect your monitor via D - Sub (VGA) or DVI but not HDMI unless you have a HDMI port your

  laptop. Sorry I couldn't give you good news.

  I hope this helps!

• USB connection does not work on my computer for hdr-cx260v

  It is a question (especially) on and off (sometimes). I have worked with Sony and have sometimes succeeded. With the help of the 'extra' 16 GB card works to connect and load. My problem is when I use the video stored in the internal memory and using the usb connection. If/when I ever actually loading the data from the internal memory (I have actually already loaded most, but not the most recent), I intend in the future to use only the memory card "exernal. My most recent appeal of Sony said I have no help since the camery is 2 years and more - they send me an e-mail to a site that gives instructions, but the instructions don't seem to solve my problem. I don't seem to have any connection problem "devices" of my USB ports.

  When I connect the camcorder usb to my desktop (using different connections of USB drive) pc, my computer does not recognize the fittings of the. When I use another card memory USB for same usb connections, the computer recognizes the drive. There have been a few times when the camcorder has acknowledged the connection of the camcorder (most recently on June 12) - but this does not occur at thie time. If I take the memory card 16 GB additional of the camcorder and connect it to the connection of memory card, the computer has always recognized it.

  My problem is trying to get the video from the cameras internal memory via the USB connection.

  I think if/when can I get these loaded files, I have the intention of is no longer using the internal memory of the camera and always use the extra memory card.

  Stone

  I realize that if I could have the laptop recognizes the usb connection, I could manually copy video files myself, even if I think THAT TDC would have also worked in this case.

• Unable to connect Sony KDL60EX500 Widescreen 60 "LCD for laptop Asus UL50V via an HDMI cable.

  Original title: Sony KDL60EX500 Widescreen LCD Plug and Play 60 "questions

  The first time I have connected my laptop Asus UL50V to my via a HDMI Cable TV it immediately conne.cted.  I do not use it for several months then tried to connect to them, that I have a very difficult time. I tried to stop the laptop and the TV power off and waiting to initialize never the combination of turn HDMI cable with no luck. I have don't same st screen at the Sony manufacturer's instructions, no luck.

  My laptop has a processor hybrid two VGA and Intel 4 chip family series

  Help, please.

  Hello

  1. what happens when you try to connect to TV laptop Asus UL50V?

  2. what operating system is installed on the computer?

  Reference:

  Connect your computer to a TV:

  http://Windows.Microsoft.com/en-us/Windows7/connect-your-computer-to-a-TV

• I don't know if I'm connected to a network. How would this knowledge? I've never read "Learning the Computer for Dummies"!

  How will I know if I'm connected to a network?  IP address conflict arises and I don't know what to do.  I forgot to get the book "Learning the Computer for Dummies", which I should have got that I'm completely computer illiterate!  Please, someone help!

  You can have an ip address conflict if you are connected to the internet through a wired or wireless router that allows two or more computers or other devices in your home to connect to the internet at the same time usually by means of a cable or dsl internet provider.  You can have this conflict, even if the computers in your House did not implement a network to share files and printers between them.  You can go to control panel > network and sharing Center to view network information.

  A common situation that can lead to a conflict of ip address, it's only 2 (or more) computers or other devices are connected to the router (via ethernet or wireless), and both have ip addresses assigned by the router automatically, one of the computers, then past in mode 'sleep', and while we sleep the router restarts.  When the router comes back online he doesn't know the computer sleeps is here and that he already has an assigned ip address and so it gives the ip address of the other computer.  When the computer asleep wakes duplicate error will be triggered.  It can be solved by turning off computers and turn it back on so that the router will assign them new ip addresses.  If this is not what is happening in your situation, the following may help: http://windows.microsoft.com/en-US/windows7/Get-help-with-There-is-an-IP-address-conflict-message

• How to connect my computer laptop advent for my toshiba tv through hdmi cable.

  Please if anyone can help me with this

  I bought a hdmi cable to connect my computer laptop advent for my toshiba tv.

  BIG PROBLEM

  I don't understand the settings.    Call me thick but I was actually tryng to fix this for 2 months

  I am litrely to the point of screaming and ready to throw the laptop and the tv out the window (WHO COULD BE A SHAME REALLY SEE HOW I AM not ACTUALLY THE TV)

  If someone could be so kind as to help and to unmask how and what I have to press on and what to implement in what concerns the settings, I would be so gratefull thanks michelle smith

  Hi michellesmithozzyand,

  I suggest you follow the link given suggestions and check that it works.

  http://Windows.Microsoft.com/en-in/Windows7/connect-your-computer-to-a-TV

  Hope the helps of information.

• Can you connect directly a Tablet wifi to your computer for the internet

  Can you connect directly a Tablet wifi to your computer for the internet

  Let me answer this way:

  Suppose you have a desktop or workstation that has a wired connection to the internet. Moreover, that this system also has a working wireless card. Another device with a pu wireless device to connect to desktop with a wireless ad-hoc connection. The desktop can be configured for connections to bridge the two and leave the system second to use "Internet connection sharing" to connect to the Internet.

  Start here:

  http://support.Microsoft.com/kb/306126

  Tom Ferguson.

• I'm trying to connect my computer to my HDTV via a HDMI cable that connects my computer directly into the TV. I plug it in turn all away and top but nothing, just 'no signal' suggestions on solving this problem?

  HDTV is a Pangoo with 2 HDMI Sockets.
  The computer is a Dell windows XP with 1 HDMI.

  I had the same problem and I've spent too many hours to find a solution and I finally found one. I could also connect with my HDTV with HDMI, then one could i ' t.

  Go to your "Start menu", click on "controll panell", choose "notebook", then "windows mobility center", on the "external" box click on 'connect the screen' and wait a bit until a box appears. Choose "duplicate my desktop on all displays (mirrored), choose and then aply OK.

  I hope I have been helpful for you and many others and you can enjoy your movies on your TV again.

• I'm trying to connect my computer hp laptop dx7 3085 64-bit to a 3051 printer has wireless via a mifi.

  I'm trying to connect my computer laptop dv7 3085 I7 Win 7 64 bit on my new 3051 printer J611h > my internet is through a verizon MIFI. Any help will be greatly appreciated.

  Hi cadams,.

  Follow the steps outlined in the document below. Let me know what you find?

  Cannot find the printer ' Error Message appears on the computer for a wireless network Installation

• ' Error' the settings saved on this computer for the network do not match the requirements of the network "while trying to connect to the wireless network

  Title: Cannot get an Internet connection!

  Connection Wi - Fi comes with a warning that 'the settings saved on this computer for the network do not match the requirements of the network"what should I do to get a connection?

  Hello

  -Did you do changes on the computer before this problem?
   
  Method 1: I suggest you follow the steps to run the troubleshooter from the
  link and check if the problem persists.
  Using the troubleshooter from network in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7
   
  Method 2: I also suggest you to follow the steps from the link and check if it helps.
  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows
   
  Method 3: Follow the steps below to remove and add the wireless network.
  (a) click Start and select Panel.
  (b) select network and sharing Center and manage the networks without wire (on the left).
  (c) in the list, click on your network and Remove top.
  (d) you can then search for available wireless networks again and reconnect it to your network.
   
  Hope this information helps.

• When I connect my computer to the Netgear router, they do not seem to recognize the signal from the modem. I have to run each device directly to the modem (one at a time) for internet access.

  I have both a laptop and a desktop computer and use a modem wired high-speed internet.  I bought a router "Netgear" 5 port so that I could have both online at the same time, but when I connect my computer to the router, they do not seem to recognize the signal from the modem. I have to run each device directly to the modem (one at a time) for internet access. It gets very tedious, please help...

  Original title: router does not work...

  Hello

  Welcome to the Microsoft community.

  I see that when you connect multiple computers using the Netgear router, it does not recognize the signal from the modem.

  You must contact the ISP to verify if they can help you with this question.

  In addition you can keep these items handy, it might help you.

  Set up a wireless router

  http://Windows.Microsoft.com/en-in/Windows7/set-up-a-wireless-router

  Install or remove a modem

  http://Windows.Microsoft.com/en-in/Windows7/install-or-remove-a-modem

  Change modem settings

  http://Windows.Microsoft.com/en-in/Windows7/change-modem-settings

  It will be useful.

  If you need help with Windows, let know us and we will be happy to help you.

• All of a sudden, after a update of firefox, I get "this connection is untrusted" for Facebook, no matter if I use http: or https:, WHY?

  All of a sudden, after a update of firefox, I get "this connection is untrusted" for Facebook, no matter if I use http: or https:, WHY? Here are all the details of the error message:

  This connection is Untrusted

  You asked Firefox to connect safely to facebook.com, but we cannot confirm that your connection is secure.

  Normally, when you try to connect safely, sites will present a reliable identification to prove that you're in the right place. However, the identity of this site cannot be verified.
  What should I do?

  If you normally connect to this site without problems, this error can mean that someone is trying to impersonate the identity of the site, and you should not continue.

  This site uses HTTP Strict Transport Security (HST) to specify that Firefox didn't connect safely. As a result, it is not possible to add an exception for this certificate.

  Facebook.com uses an invalid security certificate.

  The certificate is not trusted because the issuer certificate is unknown.

  (Error code: sec_error_unknown_issuer)

  (Also included a screenshot).

  COR - el said

  You can check the date and time and time zone in the clock on your computer: (double) click on the clock icon in the Windows taskbar.

  • https://support.Mozilla.org/KB/secure+connection+failed

  You can retrieve the certificate and check details such as WHO issued the certificates and the expiration dates of certificates.

  • Click on the link at the bottom of the error page: "I understand the risks".
  • Let Firefox recover the certificate: "Add Exception"-> "get certificate".
  • Click on the button "View" and inspect the certificate and the Coachman, who is the issuer.

  You can see more details like the intermediate certificates that are used in the Details tab.

  If you cannot inspect the certificate by "I understand the risks", then try this:

  Open the chrome URI by pasting or typing this URI in the address bar to open the window "Add the Security Exception" and to check the certificate:

  • chrome://pippki/content/exceptionDialog.XUL

  In the field location type and paste the URL of the Web site

  • retrieve the certificate via the button 'Get certificate '.
  • Click on the "view..." button. "to inspect the certificate in the certificate display

  Check which is the issuer of the certificate.

  You can get more details like the certificate chain in the Details tab of the certificate display.

• Satellite Pro L - Assistant 'connect to computer' does not

  Hello

  I have a new laptop 'Satellite Pro L Series' and'm having problems connecting to my workplace using the Internet and a VPN connection I've implemented in Windows.

  I was advised I need to connect my new computer on our LAN Server via the function "http://Server/connectcomputer" However, I can't do this work, as whenever I try, I get a message saying that I have a connection or an open window. The problem is, that there is no (other than my LAN) connection open, and no other windows are open. I disabled my Bluetooth and Wireless connections in Device Manager and remove my VPN. After that I restarted the computer laptop, but to no avail.

  I get the error message is in a "Small Business Server Network Configuration Wizard" window and says "the Network Setup Wizard cannot complete because you have an open connection (for example, a network connection or Windows Explorer window) with the Small Business Server computer." Close all connections and windows and re-run the Network Setup Wizard,"the only option then is to select the OK button.

  I rang my Toshiba and IT consultant, but they are at a loss, as I am. Can someone point me in the direction I should go?

  Thank you.

  >... connection at my place of work using a VPN and Internet
  Please don t get me wrong, but it should be clarified with your company and your network administrator. I use VPN connectivity too and it has been configured and tested by the network administrator.

  In society, we test network and before I've had my laptop for use at home, it has been tested and confirmed that he has no problem with the VPN connection.
  Maybe I'm wrong, but I put t think that Toshiba can help you with this. If you have a problem with the operation of the equipment Ok but I don t think they can help you with some internal stuff from the company.

  You have a few general problems with network functionality on your laptop?