Unable to connect Sony KDL60EX500 Widescreen 60 "LCD for laptop Asus UL50V via an HDMI cable.

Similar Questions

• Unable to connect sony vaio E series widows 7 laptop for Wi FI.

  I might have accidentally uninstalled a program. Have not been able to connect my laptop to wireless internet. Although my ipad to connect. Can someone tell me what program is required and where I can find it? Or can there be another problem?

  TNX

  trendydoc,

  The only software that may limit the wifi is clever network utility...

• Laptop does not start with LCD connected via an HDMI cable

  I have a laptop Toshiba A660 running windows 7 Home Premium. I use and external LCD connected via an HDMI cable. If I leave the cable connected to the computer when I turn it on most of the time it does not start. It hangs at the windows from logo. The only way I can boot is power off (by operating switch for a while) and remove the HDMI cable.

  Hello

  To update the display driver, following the steps outlined in the article below:

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Update drivers: recommended links

  http://Windows.Microsoft.com/en-us/Windows7/update-drivers-recommended-links

  See the articles on how to set up two monitors:

  http://support.Microsoft.com/kb/976064

  http://www.Microsoft.com/athome/organization/twomonitors.aspx#fBid=f5W9Hvf07IV

  I hope it helps

• Z580 help: connect to the TV via a HDMI cable

  I recently had my father the IdeaPad Z580. It is really eager to stream its videos and watch them on TV. I connected it today via a HDMI cable and got really excited when the screen was reproduced on the TV... but then, when I clicked on internet Explorer tile, I got the following error message:

  This application cannot open
  The screen resolution is too low for this application to run.
  Change your screen resolution

  Seems simple enough... but really did not have a clue what to do! Doesn't help that I'm a complete newbie to Windows 8!

  I'd be really grateful if someone here would be able to help / tell me what to do! ^^

  Thanks in advance!

  All of a sudden it works without enaything. In fact, I just do a windows 8.1 update.

• trying to connect my ps3 to my laptop via a hdmi cable

  Im trying to connect my ps3 to my laptop via an hdmi cable, but nothing happens

  What can I do?

  Hi mezilla,

  Please see the post below with a similar problem and fix possible:

  http://boardsus.PlayStation.com/T5/PlayStation-3-General/how-to-connect-PS3-to-Windows-Media-Center/m-p/38640141

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Unable to connect to the internet from the computer laptop windows 7

  Unable to connect to wifi internet

  Hello

  My Sony VAIO laptop is connected to wifi and I can ping google.com, but cannot browse the internet; After a few messages I deleted all files from temp dir

  I have implemented security to min average but still impossible to surf; I have a problem: windows protection does not work, this may be the cause of the problem?

  Hello

  Thanks for the response back.

  I suggest you to reset Winsock.

  Follow the steps below:

  a. Click Start button and type cmd in the search box.

  b. right click on cmd.exe, and then click Run as administrator.

  c. press to continue.

  d. Type "netsh winsock reset" without the quotes to the command prompt and then press ENTER.

  Note: If the command is typed correctly, you will receive an error message. Retype the command. When the command is executed successfully, a confirmation is displayed, followed by a new command prompt.

  e. Type exit and press ENTER.

  Hope this information is useful. Please come back to write to us if you need more help, we will be happy to help you.

• Satellite L650-11F - how to connect to LCD via an HDMI cable?

  Hello world

  I have the Satellite L650-11F with ATI 5650 and HDMI port and I want to connect the laptop via HDMI lcd screen so that I have some office using 2 * ATI Catalyst * and * software HydraVision, but ATI sites said that Toshiba notebook is not supported (Please check with your mobile phone OEM for support of the drivers for these laptops).

  So, how can I connect my laptop to LCD screen to get 2 workstation?

  Sorry for my bad English :)

  Hi thebluewriter,

  I think you need to check only the other discussions of the forum on the connection for laptop LCD screen. You will find enough about it!

  In any case, most recent display driver you can download on the official website of Toshiba, but usually it s preinstalled on your laptop.
  If you are using a HDMI cable, use just FN + F5 key combination to switch between monitors. All that s! :)

• EPMCFG - 10368, unable to connect to the database, check information for database

  Hi all
  
  Server: Windows server 2008 64-bit, and 64-bit Oracle 11 g
  
  First of all, I have installed Oracle client 32-bit and 64-bit client then Database 11 g. Then, I installed the version hyperion 11.1.2.2. but at configuration time, I get the error message
  EPMCFG - 10368 unable to connect to the database, see database documentation.
  
  but the correct database information that I have given. Map of Loopback also installed Microsoft.
  
  I spoke in the forums about this error, in this discussion, they wrote about tnsnames.ora. I need to edit in this file?
  
  Kind regards
  Mady
  
  Published by: mady on March 20, 2013 10:47

  Hello

  I have uninstalled and installed OS again once, now I am able to connect to the database now.

  See you soon,.

  Mady

• Satellite A100-784 - connect to the TV via a HDMI cable

  Hi friends,

  I have a Toshiba Satellite A100 - 784 PSAANE. Its a product abandoned now :-( I wonder if I can connect this laptop with the Sony Bravia LED TV via HDMI cable.
  I'm not able to find if the laptop is compatible for it.

  Please help me a way to find a solution to connect the led TV and how to do it? Please also help with the cables needed for the same thing.

  Sorry guys, I'm quite naïve HDMI company.

  Thanks for all the help,

  Kind regards
  Perkins

  Hey Buddy,

  What do not know exactly?

  The laptop has only VGA and S-Video output port but no HDMI port. So that you can t connect the laptop to the TV because you can t connect the HDMI cable to your computer.

  If your TV is VGA or S-video port, you can use this cable. After the connection to the TV, press the key combination FN + F5 to switch between monitors.

• Satellite Pro C850 - 1 K 3 can't connect to a TV via an HDMI cable

  If I use either F4/the windows key + P and select duplicate or PC screen only (or another option) and then plug it into the TV, so the laptop screen and the TV screen are blank. By pressing any key does not display anything on my laptop screen, then when I unplug the HDMI cable that it happens with the second screen only option highlighted. My laptop strangely ignores what I click and returns continually to this option and unfortunately, I can't project the screen on any monitor (I tried 4 separate monitors).

  My laptop was able to be plugged into a TV and I did this several times, but as far as I know this stopped when I had a windows 8.1 update (my assumption, I don't know). I searched the web for solutions, and none have worked. I tried the method of detection of the monitor through the resolution on the desktop option, but again, this cannot be done because I don't see anything on the screen when my laptop is plugged into any TV, and I tried many times.

  Any help is appreciated

  Thank you very much

  I use Toshiba laptops a few years now and what I can say is that you need to connect your laptop to the TV first, select the right port on the TV and then use key FN or F to change between TV Office laptops and connected.
  Connected TV or another external device must be established first.

  Please test once more.

• Re: Want to HP dv7 - no sound on the TV when it is connected via a HDMI cable

  Hello.

  I would also like to ask for help because I'm faced with the same question.

  what I'm trying to get a sound with HDMI, it will not work...

  Delfim João

  Hi @Delfim ,

  Thank you to visit the Support Forums HP and welcome and thank you for all the information about what you tried. I looked in your question about your computer laptop dv7 HP ENVY and the problems of sound with an HDMI cable connected.

  Try this fix.

  1. a click right icon "speaker" (right)
  2. Select playback device
  3. click right speakers
  4 activate and as default
  5. click apply/OK

  This is a general document on the resolution of the problems with the HDMI connection.

  With the HDMI cable you have restarted the laptop?

  Have you tried another cable?

  Hope it will be useful.

  Thank you.

• Cannot hear the sound of the TV after connecting via a HDMI cable

  Original title: sound on tv

  I was able to hook the hdmi cable to the computer laptop & tv and watch movies on tv. Now, for some reason I can't hear the sound on the tv more, the sound from the laptop only.  How can I fix?

  Hello Monica,.

  -What operating system is installed on the computer?

  If you have installed Windows 7, you can read these articles and check if that helps.

  Connect your computer to a TV: http://windows.microsoft.com/en-us/windows7/connect-your-computer-to-a-tv

  Sound cards: frequently asked questions: http://windows.microsoft.com/en-us/windows7/sound-cards-frequently-asked-questions

  Thank you.

• laptop loses picture when the hdmi cables are connected

  laptop loses picture when I connect the laptop HDMI cable to HD TV

  Help, please.

  Thank you.

  Try pressing your "fn + f5" together until both monitors are on. The combination of keys is to pass between the monitors. In your case, the first time, it should turn on the laptop screen and turns off the second monitor, the second must turn them both on. On some computers, it's the f4 key and on dell is the f8 key, the key is usually the image from one monitor to this topic.

• Unable to connect Sony DSC-W650 camera to the computer

  original title: Sony DSC-W650 camera woes

  Anyone had problems connecting camera Sony DSC-W650 to pc via the USB with Windows 7 OS?  Very frustrating.  Beautiful pictures, just can't get off the bloody camera em.  Chat with rep online, no help to Sony since.  Downloaded software (since the plug & play does not work) without help.  Tried multiple USB ports with the same results.  Device Manager indicates I need to troubleshoot the device (appears on device like DSC-W650 Manager so it must be to see something), but zero.  Currently re-download software (PlayMemories) but I'm not going to hold my breath.  Help!

  Hello

  Thanks for posting the query on Microsoft Community and we are pleased to help you.

  The description of this request, it seems that you are having problems connecting camera Sony DSC-W650, prosecute the USB ports on the computer.

  I would like to gather more information on this problem:

  (1) that you get any notification on the screen after connecting the camera to the computer?
  (2) do you receive an error message after you connect the device camera to the computer?
  (3) don't you make changes to the computer before this problem?

  Perhaps, the hardware and devices troubleshooter can only solve the problem.

  You can track upward with the following methods:

  Method 1:

  Please see the link to open and run the hardware and peripheral troubleshooting tool on the computer:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2:

  If the troubleshooter doesn't help, maybe, update the drivers for the USB can solve this problem.

  You can follow the link to update the drivers for hardware that does not work correctly:

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Please let us know if the problem still persists.

• Unable to connect the iPhone to my work 6 to 2 (portable) via Bluetooth.

  Hello.

  I had the two work 15 "MacBook Pro (retina, early 2013) Mac OS X v10.10.5/Yosemite) and 64 bit W7 EE SP1 to a Thinkpad Lenovo W530 to pair with the iPhone to work 6 (iOS v9.3), but they do not connect. The iOS from iPhone Bluetooth said no "connected". I want to just copy my files between each image.

  Connection of Mac OS x before trying again to 64 bit W7. If I click on the name of his MacBook, it said "unsuccessful connection - make sure that 'computername' is active and within reach. Mac OS X says 'Not connected' to 'iPhone 6"working device. Double-click on "network is unavailable. Make sure that network access is enabled.

  W7 64 bit, I say its Bluetooth and find matching the iPhone detected 6. I see the iOS device. Yet once, "not connected".  HOWEVER, it says "Connection failed"ComputerName"is not supported." and forget this device. WHY?

  Why orders wireless is so difficult? USB cable was easy.

  Thank you in advance.

  This has never been a feature of the iPhone/ipad/ipod

  I'm sorry.

  Bluetooth is supported for hands-free phone features, speakers/headphones, some keyboards a few apps from the app store and the interest of home - if it is provided by the carrier.

  It doesn't connect to other phones, computers