Connect the airport time capsule to telstra NBN

Similar Questions

• Time Machine (on Mac) does not detect the airport Time Capsule

  Originally posted on the page of the airport, but seems to be the better question for this group. Sorry for the double post

  Looking for advice on how to get the Time Machine utility for access to my Time Capsule. I use an iMac in late 2012 with MAC OS 10.12 TimeCapsule is 2015 7.7.7 running latest firmware. Airport utility is the latest firmware 6.3.7.

  When I run the application Time Machine, Time Capsule is not detected. I tried the two WiFi and with cables connected Ethernet (not tried USB yet) and my Time Capsule doesn't have a lightning bolt or firewire ports.

  Open Airport utility & see the airport time capsule. I can see all connected devices, including the MAC, but no prompt activation Time Machine on the Time Capsule.

  I recently used TM on this iMac with a G-Technology drive. It auto detects the time machine and executes a back up. But airport Time Capsule will not.

  Any suggestions?

  Sierra has been problematic with the TC.

  1. make sure you don't have any charge virus protection software. In fact, I would say that disable all software 3rd part at the moment.

  2. make sure that you can actually write to disk of TC.

  Attach the TC disc in the finder and copy a file on disk, you can delete it later... It's just to ensure that you have full write permission. If it does not for the most part, you won't be able to use Time Machine... If you can then try TM immediately...

  Just to be clear, the TC is a network device. You have tested with ethernet and wireless... Ok.. They are only suitable methods. You cannot use USB. And clearly, TC has never had nor will never be ports Firewire or lightning.

  3. no chance that a reset complete TC. This will not delete the files on the hard drive, but you must make sure that the device is configured on the current computer.

  4. There are many positions in these days... read through them and do some research. Sierra is a bleeding edge new... So wait you to spend a lot of the precious liquid if you choose to be an early adopt.

• HOW THE AIRPORT TIME CAPSULE WIRELESS NETWORK IS PROTECTED?

  I implemented the airport Time Capsule, using a DSL modem connected to the internet as its bridge.  MacBook Pro was used for initial set up by the bolt of lightning to Ethernet connector and then disconnected and works perfectly.  Now, I would like to use Wi - Fi for my Samsung phone not iOS.  On the Samsung wireless I connect to my home network using a password.  Well, I don't think that a password was never set.  How can I configure my wifi at home to establish a password?   I don't think that the modem settings should enter in solving this for me, but I'll add that the modem required a static IP address be entered for this connection when its router features have been disabled for the connection of bridge.

  If the Time Capsule (TC) provides the wireless network, then you can secure it using AirPort Utility, as follows:

  • Run the AirPort Utility.
  • Select the TC and then, select change.
  • Select the wireless tab.
  • In the wireless security, select the type of security. I highly recommend that you choose: WPA2 Personal
  • Enter a password in the field password wireless. Enter the same password in the verify password.
  • Select Update.

  

• How many ethernet modem ports should have to support the airport Time Capsule

  I have a question: how many ethernet ports if a modem must support the airport Time Capsule?

  One (1)

• Parameter problem to the airport Time Capsule

  Already, we currently have a WiFi system with a NetGear router and a modem from Time Warner.

  I just want to use the airport Time Capsule to back up my Mac.  My husband has a PC.  I followed the instructions but the airport still comes up in the utility.

  Mac OS X El Capitan 10.11.6 and the latest 802.11 ac 3 TB so I don't know what I'm doing wrong.  I plug an Ethernet cable at the airport, then in the Modem - nothing after I plug the power - Amber flashing light.  I have changed ports unplugged and plugged back in French - restart the Modem.  Nothing works.  I bought it so it would work straight out of the box - so far, I have spent a lot of time trying to understand it.

  Any help would be so appreciated!

  Hello

  Try the help in this support article > Wifi hotspot: understand and resolve a blinking light of amber status - Apple supported

• How can I connect my Airport time capsule to my WiFi network so he just backup my Mac and not extend nor want to be a base station

  How do I connect/install my time capsule airport to my new WiFi network so she just backup my Mac and not to extend my WiFi or want to be a WiFi hotspot

  There is no way to connect a TC to a wifi network. It must be connected by ethernet to the main modem or to the router.

  I don't understand what you're asking...

  If you want that the backup more wireless computer... How the TC cannot work as Wifi hotspot... It's impossible.

• How to free up disk space on the airport time capsule?

  I want to add a new macbook to my time capsule 2 TB airport but I get the error message "needs space". Is there a way to free up space without erasing the whole time capsule?

  Only by deleting the files in the backup itself. If you use Time Machine, then you'd that uses the Time Machine application. It would be much easier to erase the drive in the time Capsule.

• How can I connect my Airport time capsule to the nbn optus

  I just got the NBN Optus connected and time capsule doesn't seem to work, can anyone advice on how to connect. I connected to a modem (Sagem Fast 38640op) with cable but the mac does not expect a return to the top

  You should do a full factory reset on the TC...

  Repeat the installation... and it should work correctly in bridge and create a wireless network.

  The Sagemcom really poor wireless but you can leave it on... use it for your network wireless of comments.

  This is my normal configuration guide... but there are a few specific pieces to network problems with the operating system later as Yosemite or El Capo.

  Start from a factory reset. No files are lost on the drive hard in doing so.

  Universal factory reset

  Turning off the TC... That is, remove the power supply cord or the power at the wall outlet, wait 10 seconds... Hold the reset button... be nice... Turn on always even now in reset... and keep holding in for another 10 seconds. You may need assistance because it is difficult to hold in reset and power on. It will show the success quickly flashing led front. Release reset... and wait a few minutes for the TC to reset and return with the factory settings. If the front LED flashes quickly you missed and simply try again. The reset is quite fragile in these... Press the key while it is just click away and not more... I've seen people bend lever or even break. I use a toothpick as a tool.

  NB. None of your files on the hard drive of the TC are removed... This simply clears the settings of the router of the TC.

  The installer the TC.

  And then redo the configuration of the computer with the Mavericks - Yosemite - ElCapo. (MYELCAP)

  1. the use of very short names... NO APPLE RECOMMENDED names. Without the space and pure alphanumeric characters.

  for example TCgen5 for the base station and the name of the TCwifi wireless.

  If the problem is using wireless TC24ghz and TC5ghz with fixed channels as it also seems to help stop the nonsense. But it can be tried in the second round. IE, plan on a first and second series of changes to fix this... If all goes well... I note other steps can you tour2.

  2. use all passwords also consistent with 1. but maybe a little longer. IE 8 and 20 characters of mixed cases and numbers... no alphanumeric non-caracteres.

  3. If the TC is router, you can ignore this point. It is only a problem when the TC is bridged.

  If ensure that the TC is always the same IP address... you will need to do this on the main router using a dhcp reservation... or a bit more complex setup by using the static IP address in the TC. But it's important for deriving from intellectual property in all directions when MYELCAP do not remember his name for 5 min after a reboot done for poor network management.

  4. check that your share on the computer name does not change... Make sure that it is also in line with the above... short without space and pure alphanumeric... but this change will mess up your TM backup... so be prepared to make a new, full backup. Sorry... keep this one for the second round, if you want to avoid a new backup.

  5 attach the TC disc into the computer manually.

  In Finder, go, connect to the server in the main menu,

  Type in SMB://192.168.0.254 (or whatever ip of TC is that you made static. It's a default router 10.0.1.1 and I encourage people to stick with it unless you know what you're doing).

  You can use the name... SMB://TCgen5.local where you replace TCgen5 with your name of TC... local is the default domain of the TC and does not change.

  However the names are not so easy as... the IP address nor reliable. They are not at least not in Yosemite. The field can also be a problem if you are not clogged or wireless directly to the Treasury Board.

  6. ensure that IPv6 is set to link-local only in the computer. For example wireless open network, wireless and Advanced preferences / TCP/IP... and the difficulty of IPv6. link-local only. Do the same for the ethernet if you use it.

  

  It is a lot more jiggery pokery, you can try, but the above is a good start... If you still find not reliable... don't be surprised.

  You may need to do more work on the computer itself. for example, to reset the NVRAM/PRAM/SMC... helped some people. A clean installation of the operating system is also useful if you update installed.

  https://discussions.Apple.com/message/29202159?ac_cid=ha123456#29202159

  Let us know how you go.

• I have the network wireless with an extreme airport using my base station that dessert 4 Airport expresses. I want to replace the base station with a time capsule from apple.  Are there specific instructions other that connect the new time capsule

  I have a wired to the internet using my base station for 4 expresses the hard extreme airport.  I want to replace the base station with a time capsule.

  It is also easy to replace the existing base station and adding the name of the network and the password?

  You should be able to transfer your configuration of your current access point to new, and then you would just set up the internal drive, try to look at these articles:

  ith-new http://www.TechRepublic.com/article/apples-Airport-extreme-out-with-the-old-in-w.

  -one-airport-extreme-or-time-capsule-to-http://www.iclarified.com/31189/How-to-Transfer-Your-configuration-settings-fromanother

• Why the airport Time Capsule for P/W after update to 7.7.7

  Time Capsule ask P/W when I click on it in the Airport utility to see whats connected to it, but never recognizes the P/W or back with the icon to forget.

  He returns to normal after a disconnect and a return to the restart card. This happens since the latest firmware update to 7.7.7.

  Once the Capsule is back to normal and you can access the settings in AirPort Utility, my suggestion would be to delete the current password on the Base Station and add a new password. It worked for me with the same question, and it might for you as well.

  Make sure you remember the password in the keychain in your Mac is checked, and then click Update at the bottom right of the window to save the new settings.

  

• Failure of the airport Time Capsule?

  I have a Time Capsule from Apple Airport – 2 TB (ME177LL/A). Today, I was unable to access the drive in the finder for the first time. The airport icon does not appear in airport utility. More than a month, no real change in my machine, no new installed apps, I've upgraded to El Capitan. I did some research on Google and found the only real option for me (after a power power off to the airport and my machine) is to reset the router to factory settings which I seem to have done. In addition to killing the wifi (which was still working before reboot), the Airport now appears under the button "other Wi - Fi devices (1). But whenever I select which and it attempts to connect (so I can probably do a manual installation) it fails and merely says that an unexpected error has occurred. I don't know if I lost all my files on the disk, since this seems to be a failure any which allows to treat the router itself. He was still working as a bridge providing internet and Wi - Fi before the reset, now it only provides internet for everything that it is hooked up via ethernet.

  I had some of my gripes with this product over the years, but the lack of diagnostic information is now slightly irritating. Is there something else for me to do a short delivery to another zero?

  First of all... no files will be lost on the hard drive... for this, TC would fail to start or have a disk failure error...

  Your questions are totally El Capo... and pretty typical.

  Why should he choose now occur instead of a month ago... done installing part of the pleasure of the wireless network adapter... It's frightfully little reliable.

  I want you to do it again... Yes I know.. Sorry...

  Disconnect the TC of the network and plug in ethernet on the computer... However leave the radio on... Apple depends on increasingly less reliable network strategy.

  Do a complete factory reset.

  Universal factory reset

  Turning off the TC... That is, remove the power supply cord or the power at the wall outlet, wait 10 seconds... Hold the reset button... be nice... Turn on always even now in reset... and keep holding in for another 10 seconds. You may need assistance because it is difficult to hold in reset and power on. It will show the success quickly flashing led front. Release reset... and wait a few minutes for the TC to reset and return with the factory settings. If the front LED flashes quickly you missed and simply try again. The reset is quite fragile in these... Press the key while it is just click away and not more... I've seen people bend lever or even break. I use a toothpick as a tool.

  N.b.: any of your files on the hard disk of the TC are deleted... This erases just the settings of the router of the TC.

  Go in the wireless and ethernet on the computer and make sure you have IPv6 well positioned to post a local link only. for example...

  

  It is set to automatic might be the reason why you have problems... one day he autoed to bad settings... Auto is a plan for a disaster.

  Now, try and open the configuration of TC in airport utility... No luck... do it manually...

  Accept this self... is always a bad idea... so here go us.

  1. click on file and set up the other.

  

  2. Enter the IP... always 10.0.1.1 after a reset. No password necessary yet.

  

  3. now you can see all parts of the installation... you will go to each tab to make configuration.

  

  4. in the first place is the Base Station... and change the name... in short, no spaces and highly recommended pure alphanumeric characters.

  Ditto for passwords. Internet will be DHCP for most people having nothing else... then wireless

  

  Then the network... Choose what you want yourself... you are now in control.

  For most people, they will be set to DHCP and NAT or Off (Bridge Mode)

  

  5. Once you have finished making changes... update allows to configure them for the TC... and wait until it restarts...

  If all is good it will come back on the main use.

  

  If it still errors just click on TC icon and go back into the setup and fix anything there.

  Any step fails to tell me that that...

  You may need to switch to ethernet, if you have any problems, if.

  In airport utility now ethernet is under other devices Wi - Fi... that makes no sense at all. Ethernet will only appear when it is connected and working.

  

• Airport Time Capsule ethernet and WiFi installation

  I am trying to set up my home network, but also, somehow, the practice run for the configuration of my future business...

  Here is the component.

  -Modem: Fast 5250 BELL FIBE Home Hub 2000.

  -Airport Time Capsule 1 t (a big)

  -AirPort Extreme (large)

  -AirPort Express (size of the Apple TV)

  Here are the different coverage area and device usually used in the:

  -office: Printer via USB or ethernet, ethernet MacPro, 2xMacBookAir.

  -Living room: Smart TV, Apple TV2, PS4 (all via ethernet if possible) as well as a bunch of iOS devices and laptop computer via a Wi - Fi connection

  -In room: IOS, Apple TV via Wi - Fi device.

  So good, here's the catch, the modem's in the entry closet surrounded by concrete, so I close the Wi - Fi on it. Cable Ethernet running from there, at the office, upstairs room and the main living area. The plan was to put the TimeCapsule 1 t in the office, extreme in the living room and express on the floor. But I already have problems that they can't be all connect via Ethernet in the modem... Oh! What a mess, he made... So I saw on the support page from apple, is it better to put the airport Time capsule 1 t as principal to create the network. So if I put the Capsule in the closet as the main will be backup my stuff via ethernet?

  Also, I have the older version of Time Capsule (dish 500 GB). Shud I use it as the main airport will be connected to it via ethernet anyway?

  And finally, I connect to the modem using PPPoE bell hand and another airport the main via Bridge DHCP mode. Is this fair?

  Probably all covered already in other posts sorry if it is redundant. Thanks in advance for taking the time to help me.

  Probably all covered already in other posts sorry if it is redundant. Thanks in advance for taking the time to help me.

  You searched for other positions that have covered this slot a form or another? Maybe you should do that first.

  Base stations-Setting up from the airport and set up a network extended wireless (802.11n)

  Airport + Wi - Fi - Apple Support

  AirPort Utility 6.x - if your base station or Time Capsule is connected to a router providing NAT and...

  If you have documentation for your devices, then read it to see if it provides assistance. And don't overlook the help to the Finder or the Airport utility menu. If you're patient probably Bob Timmons found you your topic and help you. He is the resident expert.

• Airport Time Capsule HD access

  I have an AC of 802.11 airport Time Capsule 3 to, PartNumber: ME182LL/A, and I want to save my MacBook Air by Time Capsule app.

  In addition, I use it as an external hard drive, moving some files to the airport Time Capsule using the Finder.

  I use physical conection from my MacBook to the trough of Time Capsule a RJ45-USB converter.

  But I am extremelly experiencing a lot of time to access my files using the Finder.

  Do you have an idea how I can fix this connection?

  Do you have an idea how I can fix this connection?

  I guess that your Mac has a Thunderbolt port.

  Use a Thunderbolt for the Ethernet card.  It's up to 10 times faster than the USB adapter. Your actual speed will be 4 to 5 times faster than USB.

  Maid in Gigabit Ethernet Adapter - Apple

• Files of WD My Cloud Airport time capsule

  I use 2T WD My Cloud as a hard disk to backup to my MacBook Pro 13 "2.5 GHz Core i5. How can I do all of my WD My Cloud backup files, transfer to the airport time Capsule. So did anyone get an answer to this question?

  Copy and paste the sparsebundle Time Machine.

  But we do not recommend usually people do. It is much better to just start a new backup for the TC and the old backup on the WD mycloud until you build up a sufficient history... say 3 months on the TC... then you can wipe.

• Airport Time Capsule 3 TB from

  Hi I want to buy airport Time Capsule 3 TB of storage and to share my video, music, another document to my mac, iPhone and the other device that we have in our House, so I can do this and make my films and another doc who are on the airport time capsule or it is just to give the backup?

  TNX

  What you ask is known as a media server.

  The Capsule is not a server media... it is a router with a built-in hard drive designed to back up the data on your Mac. Consider a Time Capsule for this effect, but not others.