Connect the Fusion 8Pro to ESXI 5.5

Similar Questions

• Help, I changed the password of root ESXi via powerCli, now I can not connect with the web client or the console.

  Help, I've changed the root ESXi via powerCli password, now I can not connect with the web client or the console, but I can still connect to powerCli. The command I used was;

  SE connect-VIServer esxihostname-user root - password newpasswd

  This production network btw, I have connected to each host and run the above command, these ESXi hosts are not on a domain

  y at - it something I have left out. I really appreciate any assistance that you people can provide.

  Thank you, Joe

  It is probably a longshot, but a lot of things in the land of windows is not sensitive to capital letters as Unix is.  I wonder if your new password you put through powerCLI mixed uppercase in it and if the capitalization was abandoned by command windows powerCLI Analyzer, or he interpreted as all capitals or something.   If you can still get through the powerCLI you could try to reset the password again to something simple without capitalization mixed case and if your password on ESXi strategy requires a special character, try something different than a "$", like a "_" (I find that a '_' is less likely than some other special characters (, as a '-' or a ' / ' to cause problems with analyzers.).

  Edit:

  Another thing, you can try before playing with the password once again, is to create a different username ESXi using powerCLI and see if the password ends up what you think, it should be, and if you can get with the client vsphere using it.  In this way, you can find out if there are some problems with certain characters or Cap through command powerCLI Analyzer without losing your remaining root by powerCLI access.  After some tests, you can understand what went wrong with your initial password change and may be able to fix it with less risk of losing access.  I also assume that you can not create a new username on ESXi who is able to change the root password no matter what authority give you it, otherwise, you could create a new username with PowerCLI, then connect to the client vsphere with it and change the password to root from there.

• The USB Dongel to ESXi 4.1 VM connection

  Hi all

  I have several virtual machines running on the ESXi 4.1 and one of the server VM is required to connect the USB Dongle and the software that is installed on it will work once it detects the USB dongle connected to it.

  Can you get it someone please tell me how to connect this USB Dongle Server esxi and any configuration required for the virtual machine that is present in that ESXi server can detect the Dongle and the software that is installed on it should work.

  Thanks in advance a ton.

  Concerning

  Riadh Gunnal

  We do this for several applications using Digi Anywhere USB http://www.digi.com/products/usb/anywhereusb#overview

  It is fairly simple to implement, but unfortunately it is only works for Windows boxes (that I know).

  Here is an article about setting up a virtual computer to use a USB device attached to the ESXi host http://www.virtualizationadmin.com/articles-tutorials/general-virtualization-articles/using-usb-devices-vmware-vsphere-41.html

  I hope this helps.

  Hersey

• Access the SMB storage using esxi host and manage with MS server 2008

  Hi there, I know the subject line can be confusing, but I didn't know how to explain what I need in the line object in such a short sentence.

  in any case, I have a storage device SMB, a Promise VTrak M610P, which is attached to a blade server 1U HP through interface channels double Ultra 320 SCSI host. I can't configure the VTrak as a NFS, the only way to access logical drives is connected to a server via the scsi channels and using the operating system to share the drive and the shared disks.

  I would use a server blade with dual ultra 320 SCSI host interface channels and connect the VTrak to this server blade. Then I would install ESXI hypervisor OS 5.5 to this server blade. I want to know is if the ESXI operating system will recognize the logical drives and if I create a virtual machine with MS server 2008 and see if the virtual machine detects logical drives, so that I can share the drives? I hope that I'm supposed to and if I'm not, please let me know what makes no sense, I will do the best to explain it better.

  Thank you

  Andy

  So it turns out that there seems to be something wrong with vClient when you add a hard disk (virtual disk) to a virtual machine of size greater than 4 TB. Article VMware KB: value of range error message when you add more than 4 TB capacity discs in vSphere Client describes this if you encounter this problem, add the hard drive via vSphere CLI, CLI power or vmkfstools. So this seems to be a known issue on vClient. What I ended up doing was using vClient, creation of hard disk, adding to the virtual machine (size of the hard drive is to 5.45) and when I would get the error message on the DiskCapControl out of reach, I would just click OK and then finalize the creation of the hard drive on the virtual machine. Once the process is complete, I selected the virtual machine and noticed that he indeed added a new HDD size 5.45 TB even if he's complained about it. I pulled to the top of the virtual machine with windows server 2008 R2 installed and was able to create a new disk under windows and set it up as a shared drive on the network. Looks like vClient must be updated by VMware and correct this bug, if it's a bug that I think. Thank you for the help vervoort!

• Copy the ISO data store ESXi on VM

  Hello

  I'm quite new to virtualization and unable to understand the ways to copy the ISO file that is located on the data to a virtual computer store. Basically, I already installed ESXi and couple of Windows 2008 VM. Consider using one of this virtual machine as a server vCenter. Now, I have already downloaded from the VMware website and downloaded vCenter ISO to one of the data store.

  However, unable to work how can I copy the ISO to this virtual machine file so that I can install vCenter server? I have read a few things on the internet and tried to use WinSCP within the virtual machine using the IP host address, but I get "no connection could be made because the target machine actively refused it.» the connection has failed. It is similarly after I activated the client FTP on ESXi host in the firewall. I am able to SSH (putty) to ESXi host with no problems.

  How can I get this to work? Y at - it a simple method that might work? Is WinSCP way to go? If so, why it wouldn't work? Note it is lab home environment and there is no other firewalls between the two.

  Thank you

  Please use it under VMware documentation pertaining to the same.

  https://pubs.VMware.com/vSphere-50/index.jsp#com.VMware.vSphere.vm_admin.doc_50/GUID-D18E6A2F-03FB-48AC-A2C4-EBCB9E27B9BC.html

  Let me know if you have any doubt.

• Errors, try to update the free version of ESXi 5.0 to 5.1

  1.) first of all, this is the command and the error I get:

  ~ # esxcli software installer--depot=/vmfs/volumes/DATASTORE1/patches/ESXi510-201210001.zip vib
  [MetadataDownloadError]
  Could not download zip:/vmfs/volumes/DATASTORE1/patches/ESXi510-201210001.zip?index.xml deposit, to jump

  (('zip:/vmfs/volumes/DATASTORE1/patches/ESXi510-201210001.zip?index.xml', '', "erreur fichier index.xml dele de /vmfs/volumes/DATASTORE1/patches/ESXi510-))

  (("201210001.zip: [Errno 2] no such file or directory: ' / vmfs/volumes/DATASTORE1/patches/ESXi510-201210001.zip'"))
  URL = zip:/vmfs/volumes/DATASTORE1/patches/ESXi510-201210001.zip?index.xml
  Please see the log file for more details.

  2.) on the environment and Notes that relate to this issue:
  The VMwareHost is installed on a Dell PowerEdge 1900 with 16 GB of RAM. Access to the host by using the vSphere Client. I used this environment successfully for six

  months. After the update of my workstation to Windows 8 I was more able to view my virtual machines. An error message was displayed on top of the VM console

  says: ' the VMRC console has disconnected... try to reconnect. "
  An online search indicated that I needed to update ESXi 5.0 to 5.1.

  I am running:
  Version 5.0.0 of ESXi build 623860
  vSphere Client Version 5.0.0 build 623373

  (3.) I found many resources who asked how to upgrade the free version of ESXi 5.0 to 5.1

  With a free license or an evaluation, it is not allowed to download "VMware ESXi - 5.1.0 - 799733 - depot.zip.
  However, by going to this site: http://www.vmware.com/patchmgr/download.portal
  I can download build 838463 as described in the paragraph below of this page/site http://www.vladan.fr/esxi-free-how-to-upgrade-to-esxi-5-1/

  "UPDATE: If you want to upgrade to the latest ESXi 5.1 (build 838463), you should see this article: VMware ESXi 5.1, Patch version ESXi510-201210001 and get it."

  file ESXi510 - 201210001.zip, from the VMware download page. »

  This page/site explains how to apply the patch
  http://communities.VMware.com/people/vmroyale/blog/2011/09/15/updating-ESXi-5--single-use-esxcli-how-to

  4.) I connect to the host using PuTTY. Here's the session info:
  

  Using the user name "root".
  Keyboard-interactive authentication.
  Password:
  The time and date of this connection have been sent in the system logs.

  VMware offers support, powerful system administration tools.  Please
  See www.vmware.com/go/sysadmintools for more details.

  ESXi shell can be disabled by an administrative user. See the
  vSphere documentation security for more information.
  ~ #

  5.) I then download this file downloaded on the host at the following address
  /vmfs/volumes/datastore1/patches/ESXi510-201210001.zip

  (6.) to check... I am able to list the contents of the repository with the following command:

  ~ esxcli # sources vib liste--depot=/vmfs/volumes/datastore1/patches/ESXi510-201210001.zip software | more
  Name Version Release Date acceptance level provider status
  -----------------------------  ----------------------------------  ------  ------------  ----------------  ------
  Update SCSI-bnx2i 1.9.1d.v50.1 - 5vmw.510.0.0.799733 VMware 2012-08-02 VMwareCertified
  updated sata-sata-promise 2: 12 - 3vmw.510.0.0.799733 VMware 2012-08-02 VMwareCertified
  updated net-sky2 1: 20 - 2vmw.510.0.0.799733 VMware 2012-08-02 VMwareCertified
  ESX-base 5.1.0 - 0.5.838463 VMware 2012-09-12 VMwareCertified update
  5.1.0 - 0.0.799733 of xserver-ESX VMware 2012 - 08 - 02 new VMwareCertified
  Misc-cnic-register 1, 1 - 1vmw.510.0.0.799733 VMware 2012-08-02 VMwareCertified update
  ...
  ...
  ...

  7.) when I try to run the install command I get the error stated at the top of this post. How do I update my

  If you don't have access to the repository offline package and the method of installation CD interactive is not what you want, you can take a look at for example http://www.virtuallyghetto.com/2012/09/a-pretty-cool-method-of-upgrading-to.html (and the links in the blog post) to see how you can upgrade.

  André

• New here - problem with the network on vSphere, ESXi

  Not sure if this is the right place to post this, please direct me properly if it is not.

  I use an eval of vSphere ESXi on a HP workstation. I built 2 Windows 2 k 8 VM 32 bits on the first data store. They can ping and DNS seems to be resolved, but they cannot access Internet/WWW.

  I accepted the default when installing ESXi and vSphere, so the configuration of the network is all that is by default (using the switch vNetwork, I think?)

  The 2 servers are on a different area of our production area. For this case, we'll call it consigment and Lab.com. "PDC" server is the domain controller, 'Exch8' is the exchange server in the lab. Exch8 has its pointed DNS, PDC and PDC has its DNS indicated on our DNS server in the environment of consigment. They are all on the same subnet 172.1.1.x

  I can ping PDC and Exch8 of my workstation (which is in consigment) by IP, but not name (pdc or pdc.lab.com, or work).

  Can someone at - it facilitate troubleshooting?

  Thank you

  OK finally try this out... It must be something to deal with the configuraiton of windows rather than dealing with VMware.I belive

  1. on the server you can navigate on the internet - see the proxy setting.

  See how proxy setting - open internet explore - switch to the option internet tool - connection tab click lan setting and get the configuraiton of proxy and put it in the PDC. Lab.com server and see if it works...

  2. also if you have installed antivirus tools on the server that you are not able to browse internet but able to ping... Uninstall AV and try...

• connecting the new host of vmfs - what could go wrong?

  I just set up a new server ESXi 4.1, and I want to assign a logical unit number that contains a VMFS (v3.33) data store used by 4 ESXi 4.0 hosts.  I did this procedure several times before (no thanks to the combination of versions of the host, though), but I still get nervous.

  Is there a chance that something bad could happen to my data store when I connect the new host to it, or it's just my OCD Act?

  If you follow the above instructions to Dave, you have nothing to fear - if you take the right approach by being very careful with storage issues.

  Changes in versions should make no difference at all, as long as lon as all the ESX host attached to storage support the version of the data that store connect you.

  Good luck - and don't stress!

• only 1 VM connects the other don't

  Hi guys

  a recently installed Vmware ESXi 4.1, 2 - Broadcom NIC cards

  Broadcom BCM5709C connected to a switch of Cisco ESW 540

  We have created 2 virtual machines, but only on the virtual computer connects to my network, we have tried and tried the same results, but as soon as I connect the physical cable to another switch I WSC2960G the other virtual machine connects to and bothVM are happy.

  any idea what should I check to the physical switch? or that I have any special physical configiration first switch - ESW-540 -.

  any idea what are we missing?

  BTW

  vSwitch0 = vmnic0

  = vmnic1 vswitch1

  Thank you very much

  Not really sure, as I am not networking of the MEC, however there is a setting on the physical switch port that prevents multiple MAC addresses to connect at the same time. I think that you must specify "mode access" ("adjustment" is s.th. like "desktop mode").

  André

• Migrate a VM Fusion 3 in ESXi 4

  Hello

  I searched the net and cannot find an answer to this question:

  What is the best way to migrate my windows SBS2008 vm to an ESXi 4 Server?

  I am aware that I can do a migration of converter but that is the best way to do it?

  I noticed that the files vmdk for windows 90Gig player are all size 2Gig.

  Thank you

  Gary

  Convert the Fusion Machines to Vsphere

• Convert cases of Fusion of VMware ESXi?

  What's the best way for me to move the virtual machines created in VMware Fusion to my ESXi Server?

  I don't have a copy of the converter in front of me.  See this thread for a screenshot where you need to change the settings of the device.  Start the conversion all over again.

  http://communities.VMware.com/thread/250129

• Need to connect the network adapter when the ethernet cable is not connected

  Hi all and thanks for reading.  I'm new to the both VMWare Fusion and new on Mac.  I have a new MacBook Pro, I bought a month ago.

  I have software that works only on PC and its license server is linked to the mac address of the NETWORK card.  I am implemented on bridged network mode I use the multiplicity to link the Virtual PC to my other PC and it seems the network mode that works best for this.

  I've set up to work with the virtual address of the NIC card and everything works fine.  The problem comes when I'm traveling and my Mac isn't difficult, connected to an ethernet connection.  When I start the merger, told me that 'the network bridge on/dev/vmnet0 unit does not work"and that she didn't connect the device virtual ethernet0.  Under the terms of the merger, I get this error whenever I try to force the card /virtual machine/network/will connect the network adapter.

  When I'm traveling or not hung, I need to get the virtual running NETWORK card so my license server will take place so that I can run my software.  Any ideas?  Any help is most appreciated!

  Thank you

  Mark

  Change the type of the bridged network to NAT and then start the virtual machine.

• Connect the airport time capsule to telstra NBN

  Grateful for the help with the required parameters to set up my time capsule airport with Telstra NBN via Telstra condition max modem router gateway, I want to use the TC as my router and for backups, I understand that I need to be able to use the TC as a router and connect the TC via an ethernet cable to the gateway I need to put the door in Bridge mode, thanks in advance

  Double post.

• connecting the iphone 6 with the Mac Pro for messages

  My iPhone 6 is not bind properly with my Mac Pro for Messages.  When sending a message from the Mac Pro, the message will be displayed on the iPhone immediately, but this is not always appear as "sent" or "delivered" on the Mac; It just shows an incomplete treatment green line at the top of the message on the Mac bar.  This occurs only with SMS messages.

  I followed the instructions to connect the two devices using my Yahoo account, but it still does not work properly.

  Any ideas?

  Make sure that your iPhone software is up-to-date.

  Tap Settings > general > software update

  The latest iOS version is 9.3.4.

• I have phone i6, when I connect the Wi - Fi, it was connected, but in case of auto-lock, when I open the auto lock or if I m not used 2 or 3 minutes more, he will ask the password for Wi - Fi.

  I have phone i6, when I connect the wi - fi, it was connected, but when the automatic locking has occurred or if I'm not used the phone minutes 2 or 3, after that I'll use the phone, once again, it will ask the password for wi - fi.

  What is an i6 iPhone? There are:

  iPhone 6

  iPhone 6 +.

  iPhone 6 s

  iPhone 6s +.