Need to connect the network adapter when the ethernet cable is not connected

Similar Questions

• Compaq 6910p - wireless adapter turns off when the ethernet cable is connected

  Hi all

  Then, when I plug in an ethernet cable (connected to a router), my wireless adapter turns off.

  He immediately turns on when I unplug the ethernet cable.

  It isn't really a problem, either connection will provide my needs of networking, but it's just weird and I don't like it.

  Using Win7 Ultimate 64 bit.

  advice would be appreciated.

  Hello:

  This is the default setting to save the battery.

  If you always want the wireless on, go into BIOS > Menu of device Configuration and activation to deactivate WLAN-LAN.

• When I try to connect with my wireless laptop will connect only to Local access. If I connect the laptop to the router with the ethernet cable, it works very well.

  VIsta - Local access only

  HI -.
  I recently moved.   I use the same router from my old apartment and I had no problem connection in the past.   Since I moved I have a new Time Warner modem (Cisco) and the modem works fine.

  The router also works very well I'm able to connect with my iPhone and IPad without any problem.

  But when I try to connect with my wireless laptop, it will only connect to Local access.    If I connect the laptop to the router with the ethernet cable, it works very well.

  It's a Dell Studio 15 with Vista.

  The computer is able to connect to wifi to other places without any problem, but for some reason that I can't connect home.   I tried to reset the modem and the router several times, but that did not help.   I tried the option repair & diagnose several times but it doesn't work.

  I tried to look for other solutions online and tried to disable IPv6, and while it helped some and I was able to connect wireless, the computer ran so slowly that it didn't seem like a good solution.

  This has been very frustrating.   Thanks in advance for any help or suggestion.
  Staci

  Hello Staciusa,

  Have you tried to change the wireless channel that your router is running at? There may be interference that could prevent the internet connection:

  Take a look at step 6 in this article that give more details about it:

  http://www.Microsoft.com/athome/Setup/wirelesstips.aspx

  If you need assistance to change the settings of the specific router, you will need to contact your router manufacturer or your internet service provider.

• NB100 - unable to connect with the ethernet cable

  My netbook works very well with the wireless connection (even if I get only 4 MB when I have 10 MB connection). I visited a House of friends the other day and she does not have a wireless router.

  I plugged the cable broadand on my machine. I disabled the wireless connection and activated the network connection in network connections. I turned off then the feature wireless on the keyboard with the keys Fn & F1.

  It shows that there is a link in my taskbar, but when I try to open the internet it does not connect.

  I thought it was his connection because she had problems so today I went to another friends house and got exactly the same response.

  I decided to try the same thing at home and I disconnected the ethernet cable from my wireless router and performed the steps listed above.

  Still no joy - am I missing something?

  Tips:

  Use a static IP address, and not using DHCP.
  Disable your firewall. It can block the network connection.
  Disable network cards won't do not. If you use wired LAN, turn off wireless and Bluetooth in the Device Manager.
  Check if their ISP requires a power of Attorney, if they don't, specify the Proxy and Port in your browser settings.

• T460 touchpad responds liked when the Ethernet cable is plugged

  Hello

  I bought a brand new ThinkPad T460 ten days ago and I noticed that when I plug in an Ethernet cable, the touchpad responds: just a few clicks and taps are missed, the movement is slow and and sometimes temporarily blocked. The touchpad comes alive again as soon as the Ethernet cable is disconnected. The trackpoint and trackpoint button above the touchpad are not affected, only the touchpad starts to misbehave.

  This happens on both Windows and Linux, this isn't a problem of specific operating system. Furthermore, I checked to see if I am running the latest version of the BIOS, and I am. And there are no problems when you use the wireless adapter, but one of the reasons why I bought a ThinkPad was she has a port Ethernet, so not being able to use it would be extremely disappointing.

  I checked to see if there are any IRQ conflicts for the touchpad, but could find none. The problem occurs when the computer is plugged in and when it runs on battery only. I also tried two different cables in the same router, each in a different router port, and the problem persisted.

  I'm using the latest drivers for Windows 7 directly on the Lenovo site, and Arch Linux with kernel 4.4.5 - the Ethernet card is considered:

  e1000e [2.751703]: Intel® PRO/1000 3.2.6 - k network driver
  e1000e [2.751705]: Copyright (c) Intel Corporation 1999-2015.

  Should I expect it is fixed with a BIOS update, or do I have to contact guarantee? It is unacceptable to live with it.

  Tried in another House as promised, and the touchpad works very well with cable Ethernet is plugged. Also, before you leave the House with the problem, I discovered that the problem occurs only when the cable from my ISP switch is plugged into my router.

  Respect my opinion that this machine deserves a stronger touchpad, but apparently is not due to lack of computer - under normal circumstances, there is no problem with the touchpad.

  I'm stumped on how to proceed. Can I use a multimeter on the ISP switch from cable, but I'm not sure what to check (voltage? how does and between what son?). I'll also look into the suggestion of ferrite, I don't know where they are available - this thread is first heard of them.

  Anyway, I wanted to just erase Lenovo name on it.

• What is a substitute for the migration assistant? I tried in vain for three hours to migrate files from a macbook pro to each other so that even if connected with the ethernet cable the computers never see each other.

  What is a substitute for the migration assistant? I tried in vain for three hours to migrate files from a macbook pro to each other so that even if connected with the ethernet cable the computers never see each other.

  You can connect otherwise?  USB or FireWire or love at first sight?  You can connect both machines and start the one you want to transfer to target disk mode.  If your other machine is up and running with an account on it and you just want to move files, you can simply drag and drop the FRO the machine mounted TDM, or you can use the migration wizard.

  Or, if the other machine still starts and runs, you can start both computers and connect to the same wifi network and share the hard drive like machines on the network.  Access them in the finder on the new machine files and drag-and - drop, or use the wizard migration, on wifi.

• Satellite P300-173 never off when the ethernet cable is plugged or WIFI

  Hello

  I can't stop my P300 correctly.

  Whenever the ethernet cable is plugged or wifi is connected, stop work until the screen goes black but the power remains on: fan, always active LEDs. The only way to stop then is to press the power button.

  As the network is always connected, it's really annoying.

  Can you please help?

  Thank you!

  ER

  Hello

  Very strange problem
  First have you checked if you use the latest version of the BIOS?
  Please check this!

  On the European driver Toshiba page you will always find the latest BIOS and divers.

  Secondly, I would recommend disabling more upward on LAN option in the BIOS and in properties (device-> LAN properties-> Advanced tab management) LAN card

  Check if this may help solve this problem

• Compacted Outlook Express and save some of my emails. Now, I need access to the following, but can not open them. How to reopen these emails? __

  Compacted Outlook Express and save some of my emails.  Now, I need access to the following, but can not open them.  How to reopen these emails?

  Hi Redtiger1705,

  Lost emails immediately after compact preforming?
  If so, Outlook Express creates BAK files before compaction. They are copied there as a precaution, in case something goes wrong with the compaction. The following steps should help those rear:
  
  1) open Outlook Express and go to tools, Options, maintenance, store folder. Copy the entire path to the storage folder, and then click OK.  Close Outlook Express.

  (2) go to the basket and search for all files with the .bak extension.  Restore the most recent .bak files. That he will put in the OE store folder, but still like a BAK file.

  (3) click on start, run and paste the path that you copied in step 1 in the run box, and then press ENTER.

  4) click Tools, Folder Options. In the Folder Options window, click the view tab.

  (5) less advanced, uncheck the "Hide extensions for known file types".

  (6) you should see the two sent a Sent Items.dbx from the file as well as the Items.bak. Rename the Sent Items.DBX to Sentold.dbx and Rename Items.Bak sent to Sent Items.DBX. When you open OE, your messages sent items must be restored.

  Please let me know if I can be of further assistance!

  Cody C
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• network discovery, file sharing and public folder sharing won't turn on if the ethernet cable is removed and plugged

  Public folder of Windows Vista sharing problem.

  Whenever my pc is disconnected from the internet sharing files turns back on. Options: network discovery, file sharing and public folder sharing will turn on if the ethernet cable is removed and plugged. How can I prevent this from happening.

  Hello

  1. Since when are you facing this problem?

  2. don't you make recent changes?

  I suggest you try to perform the clean boot and check if it helps:

  http://support.Microsoft.com/kb/929135

  NOTE: When you are finished troubleshooting, make sure that restore you the computer mode normal startup such as suggested in step 7 of the above article.

  For more information, see this link:

  http://Windows.Microsoft.com/en-us/Windows-Vista/file-sharing-essentials

  It will be useful.

• How can I make the CONNECTION wireless at the insertion of the ethernet cable?

  I have a Windows 7 computer laptop and a computer laptop Windows 8 . On two laptops, I'm leaving both wireless and wired adapters enabled and on my laptop Windows 8 , when you insert the ethernet cable, the IDEALLY AUTOMATICALLY DISCONNECT wireless but IDEALLY REST ENABLEDwireless adapter. When I pull the ethernet cable coming out, the wireless IDEALLY it RECONNECTS AUTOMATICALLY.

  On my laptop Windows 7 However, this annoyingly can't. What happens instead, is that when the ethernet cable is inserted, the wireless REST BRANCH. Is it possible on my Windows 7 computer laptop I can do the wireless DISCONNECT AUTOMATICALLY when I insert the cable ethernet and Is RECONNECT AUTOMATICALLY when I go out?

  Hello David,.

  My apologies for any confusion.

  Refer to the advice given by don241 replied on October 16, 2010.

  Hope that answers your query.

• Printer problem - after changing the cartridge, I get a message that the USB cable is not connected

  As above. I checked the USB port and it is connected.

  Original title: printer problem. After changing the cartridge, I get a message that the USB cable is not connected?

  Hello

  1. you receive an error message/code when you try to print?

  2. What is the serial number and model of the printer?
   
  Follow the steps.
   
  Method 1
  Run the hardware and devices Troubleshooter
  This utility checks the common issues of interest and ensures that a new device or hardware connected to your computer has been installed correctly.
  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Also run convenience store Print that would help us diagnose the problem better
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Method 2

  (a) check the physical connection of the printer and make sure that the USB cable is properly plugged.

  (b) connect the printer to a different USB port and check if it helps.

  (c) check the on another computer.

  Method 3

  Run the fix - it tool from the link.

  Diagnose and automatically fix problems printing and printer http://support.Microsoft.com/mats/printing_problems/

  Method 4
  If the previous step fails, follow the steps described in the following link:
  Printer in Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows
   
   
  Let us know if it helps.

• I tried to use my photoshop cs program after a long period of non-use and he said "need to reactivate the program but I not activate - then the activation of the phone no longer works and the screen says that it summer more then 30 days so that program do

  I tried to use my Photoshop CS after a long period of non-use and he said "need to reactivate the program but I not activate - then the activation of the phone no longer works and the screen says that it was more long then 30 days if the program will not even start righteous outputs photoshop so I can't use the Help menu - I went to the adobe Web site and logged into my account and it lists my Photoshop CS as. activated in 2011 - which I guess is when I activated it - does - what I do?

  Download Adobe Acrobat 7 and Adobe Creative Suite 2

• Pavilion dv7 Notebook - how will I know if I'm connected with the Ethernet cable or wireless?

  The notification area icon displays only a wireless connection, although the ethernet cable is connected to the laptop.  HP Connection Manager shows that both wired and wireless connections are active.  All of my previous laptop (not HP) had different icons for wireless to a wired connection in the notification area.  HP has a different icon for a wired connection?  If so, why it doesn't show in the notification area?

  obxperson99 wrote:

  Enrico, thank you.  I have installed Win7 Pro.

  The Network and Sharing Center says I'm connected wireless.

  Program of HP's "Connection Manager" shows that both the wired (ethernet) and wireless networks are connected.

  If I am always connected wirelessly with the ethernet cable plugged into my machine, how to move from the wired connection?

  Open the network and sharing Center. Look at the picture of what I have posted. Do you see where it says log in or out? Select it, and then disconnect from the wireless network. If you are also connected to the wired connecttion, then the connection should be almost transparent.

• Satellite U - Touchpad stops when the ethernet cable is pluged

  Currently I am facing problem with my touchpad. When my ethernet cable is pluged in my touchpad no longer works, and as soon as I remove my ethernet wire touchpad started working. Earlier when I plud in power with pluged wire ethernet cord in the touchpad used to work, but now the tht has also collapsed.

  Pease help me guys CIHI.

  Thank you

  > When my ethernet cable is pluged in my touchpad no longer works, and as soon as I remove my ethernet wire touchpad started working.

  Hmmm... strange question. Maybe, it's driver conflict problem. In any case, try reinstalling driver Lan and touchpad. Before you update, edition of lan and touchpad drivers (usb mouse may be necessary after edition touchpad driver). If there is still problem, restore the settings from the factory with a recovery disk...

• Unable to connect to the internet but I don't have a driver for the Ethernet cables.

  Original title: connect to internet

  I reloaded Microsoft Windows Vista, now I can't connect to the internet. He says that I don't have a driver for the Ethernet cables. What can I do to fix this?

  Hello

  You download the drivers from the website of the manufacturer of the computer.

  Use the computer that you are on to get here > download save Driver/s to Office > copy to flash drive > transfer and install them on the problem.

  Driver downloads:

   

  Acer:

  http://us.Acer.com/AC/en/us/content/drivers

   

  ADVENT:

  http://www.adventcomputers.co.UK/product-downloads

   

  Alienware:

  http://support.Alienware.com/Support_Pages/Restricted_Pages/driver_downloads.aspx

   

  ASUS:

  http://www.ASUS.com/support

   

  Dell:

  http://www.Dell.com/support/drivers/us/en/19/ProductSelector

  eMachines:

  http://www.eMachines.com/EC/en/us/content/drivers

  Fujitsu:

  http://www.Fujitsu.com/us/support/

  Gateway:

  http://us.gateway.com/GW/en/us/content/drivers-downloads

  HP:

  http://WWW8.HP.com/us/en/drivers.html

  Lenovo:

  http://support.Lenovo.com/en_US/downloads/default.page#

  LG:

  http://www.LG.com/us/support/software-manuals

  Samsung:

  http://www.Samsung.com/us/support/downloads

  Sony Vaio:

  http://eSupport.Sony.com/Perl/select-System.pl?Director=driver

  Toshiba:

  http://support.Toshiba.com/drivers

  See you soon.