connect the mobile to internet via modem pc

Similar Questions

• I can not connect the Lifedrive to Internet via bluetooth or Wi - fi

  I've had my lifedrive for about 4 years now. It was a gift, and I've never used it that much; Only, I downloaded some pictures, songs & used the calendar; as I didn't have a computer of my own.

  Now, I have a computer with Windows Vista, & I was hoping I would finally get some use out of my lifedrive. But first, the cd accompanying software was not compatible with Vista (& I can't find any way or find a compatible download), & the most important thing is that I can't connect to Internet on my lifedrive via Wi - fi or even bluetooth. This function, I have never used before, so I'm starting to think that it's something wrong from the factory.

  When I connect to the Internet in a WiFi zone, & then I try to open the browser (blazer), it resets every time, & I can read this message: "memory Mgr.c, line: 3759, Word-non-aligned handle.

  When I try to connect to the Internet using bluetooth through my laptop (cable modem) Internet connection, I get this message as soon as I click on 'connect': ' errorerial: Timeout. " Could be a bad cable or defective Modem (0 x 0305)»

  My computer & lifedrive are paired, & this pairing has worked in the past.

  I did a hard-reset of my lifedrive, as this seemed to be advised in your site, but the problem persists.

  Any ideas, please? Because I'm in the point to get rid of him.

  Thanks in advance!

  Have you installed all the updates last driver for your device?

  http://KB.Palm.com/wps/portal/KB/na/LifeDrive/LifeDrive/unlocked/solutions/article/14542_en.html

  You cannot simply connect to a computer via BlueTooth and go online without establishing a PPP portal.  Take a look at softick ppp here:

  http://www.Softick.com/PPP/

  WyreNut

• Satellite C660D - error 651 attempts to connect to the internet via modem

  Hello

  I'm so stupid with this stuff so please make all responses for a 3 year old can understand.

  The problem - since a few years, I used a desktop computer and connected to the internet via modem wide empty tape and USB connection. Last week bought a Satellite C660D installed Windows 7 os provided and tried to connect with my modem, but failed miserably.

  I get the error message 651 but do not understand why.
  I use wired ethernet (because my friend does on their laptop) and tried the cable on their system, and it worked very well, so I don't think it's that.

  If someone is kind enough to explain what I do, I'll be able to keep this computer connected to the internet with usb and connect the laptop with an ethernet at the same time, so I can read the instructions while I go or I'll have to print the instructions and disconnect the Office before retrying the laptop? Yes, I'm dumb and I'm not even blonde, lol

  Thanks in advance for those who have the patience to try to help me.

  Hello

  Don t think that it s question computer laptop since many different users of the internet have reported the same error message with different but with pre-installed computers Win 7.

  There is no one-size-fits-all solution for this
  See this page:
  http://techietalkz.com/2009/10/29/error-651-in-Windows-7-a-killer-for-Internet-ConnectionVPN/

  There are several tricks to get this fixed an error
  For example: remove the Microsoft Virtual PC 2007 or disabling IPv6 for your connection.

  You will need to check the unique proposals would be interesting to know what will arrange in your case

• I can't connect the mobile phone as GPRS bluetooth modem

  MSI Wind U100 laptop (toshiba bluetooth module is built in)
  MS windows XP Professional SP3
  Toshiba bluetooth stack 6.30.01

  I can't connect the mobile phone as GPRS bluetooth modem. I tried to connect certain phones. But all the time the same problem:

  After finding mobile phone in the list of available devices, notebook coonects him. But at the same time, "coonecting COM 40 failure, try again".

  I've read about this problem in the user manual, but I am not understand, how to solve a problem.

  PS Sorry for my bad English

  I recommend you take a look at the next document if it has never worked before:
  "How to set up GPRS DUN via Custom Toshiba Bluetooth Stack Mode"
  You can find in the section "how to resources" from the following Web site:
  http://APS2.toshiba-tro.de/Bluetooth/

• I can't connect to the internet via modem HSPDA he says username or password incorect.

  But I did not enter any for my connection, even if in options internet line connections-parameters show a password which I can't reset... when I delete it it reappears automatically when I connect the dongle and establish the connection... What do I do

  The modem is Huwai

  Win xp sp3 operating system

  I had used this dongle above problem started a few days back

  It works fine on other computers

  Hello

  See this link:

  http://www.bloggertrix.com/2011/02/how-to-unlock-Huawei-and-ZTE-HSDPA.html

• 2 PCs, PC2 connects via connects the PC1 wireless Internet wireless, network sees home, but will see no internet except with ethernet cable - illogical!

  1 computer (PC1) running Vista, to date, AVG free, Spybot S & D the timer running
  2 may have been infected with spyware by surfing - received message in the Explorer to search for the virus, think it was fake
  3 then lost wireless internet in the two IE & Firefox
  4 but had a Skype conference call minutes 40 OK - Bizarro
  5 lit (PC2) laptop running Windows (light version) 7 - same problem with browsers
  5A AVG on PC1 has been updated - ran a deep analysis, found 44 spywares & fixed them
  5 b also ran registry cleaner
  6 has managed to update Spybot, is all business, then working browsers, internet connection complete
  7 can now connect 1 PC to internet with ethernet connection, he can see the wireless and home networking (local access only) so I guess the wireless work, but he can not see the internet on this subject.
  8 update both Spybot and AVG on PC1 with wired ran the two found no additional infection
  It's really strange, I do not understand how to see PC2 PC1 and PC2 connected wireless to wireless home, but PC1 is unable to connect to the internet without a network cable...
  All pretty useless Windows diagnostics

  Hello

  A message in the small window that says connected wireless does not mean that you really have a valid functional connection.

  Linking the means of router you can enter the IP base of the router in an address bar in one go, being able to connect, see and configure the router menus (extended to the wireless router manual should explain how to do).

  If it will not connect to your wireless router, journal newspaper from any computer that can connect to the router wirelessly with a wire, disable wireless security, make sure that the wireless SSID broadcast is enabled and try to connect with no. wireless security.

  Enable security wireless after you eat to make a functional connection.

  ----------------------------

  The wireless card drivers much also install utility wireless of the seller.

  To ensure that if there are utility wireless isn't running with the native Windows wireless utility provider (Service WLAN).

  ----------------

  Firewall software can block traffic Local to the network that you are trying to use because it is not set to the network Zone Trust.

  Make sure you firewall No. preventing / blocks wireless components to join the network.

  Some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible set up the firewall correctly, otherwise totally uninstall and get rid of its remaining processes that permit the own local network traffic flow.

  If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  party like Hello and NetMagic 3rd network managers can block local traffic too.

  ---------------------------

  Stack TCP/IP (network IP number) of work should look like.

  Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.

  http://www.ezlan.NET/Win7/status-NIC.jpg

  Description is the data of the card making.

  The physical address is MAC of the card number.

  The xx must be a number between 0 and 255 (all xx even number).

  YY should be between 0 and 255

  ZZ should be between 0 and 255 (zz all the same number.)

  The date of the lease must be valid at the present time.

  * Note 1. IP that starts with 169.xxx.xxx.xxx isn't valid functional IP.

  * Note 2. There could be an IPv6 entries too. However, they are not functional for Internet or LAN traffic. They are necessary for Win 7 homegroup special configuration.

• Connect the linksys to a wireless modem

  Hello

  I want to connect to my wireless router linksys WRT54GL to a vodafone wirelesss (r206) modem

  first of all, I want my linksys to get vodafone wireless signals and 'put' on local network (to connect my PC to the internet, the pc, it doesn't have a wifi receiver)

  I can get internet only via modem. Something like that:

  
  

  and I can not connect PC directly to the modem because signal problems and placement of vodafone modem

  If is a solution to this please help me. Thank you.

  Because the router is unable to do this.  There any WDS functionality.

• Portege R500: unable to connect the remote DVI monitor via Dynadock

  Hello

  I just connected Dynadock (DVI) with my Portege R500. The cell would be supported - according to Toshiba - but my experience confirms that Dynadock is not able to access the DVI ports. This implies, that Dynadock is nothing more than the USB HUB.

  My setup: Vista 32 company b (CZE edition), the latest patches, Toshiba R500.

  Software: latest dynadock software 2.3 c.

  Symptom: I can't connect to the remote DVI monitor via the dynadock, there are only two external panels with 800 x 600, but Vista does not allow me to choose.

  More information: software Dynadock requires to run without Microsoft Defender, otherwise it blocks the service: DisplayLinkService; file:C:\Program Files\DisplayLink base Software\DisplayLinkService.exe
  If you turn off the MSDef, the "error 2738" message appears when you connect the dynadock and when Vista tries to install a missing drivers for you.
  Yes, I know the VBS question and the problem is not caused by VisualBasic - VBS "Hello World" runs.

  If you think always, Toshiba Dynadock is compatible with Toshiba R500, then press Fn + F5 and look at your logs and you should find something like:
  In English: igfxext.exe throws an exception 0xc000000d, offset 0x0000f9f8.

  I look forward to the comments, advice etc. If you are able to transmit this bug report to a responsible engineer, do please.

  Hello Leo

  As far as I know, Toshiba has not designed for laptops models own only Dynadock and it can be used on every laptop or fixed. Because of this, I think that this statement about model of care is not so important for this problem.

  Toshiba provides devices and software. To connect using the USB port, and these ports must each computer or laptop. I hope that you have installed the software by following the on-screen instructions (device of should not be connected to the start-up of the plant).

  Is your Portege docked the host or you have connected Dynadock directly in Portege s USB port?

• Satellite Pro 6100: Bluetooth - how to connect the mobile phone

  I already have a satellite pro 6100 with the bluetooth software on. I tried to connect to my mobile phone without success. The problem seems to be with the laptop rather than the phone.
  How can I connect successfully. I have to update the new drivers? I bought it refurbished 3 years ago and I'm just getting round to the use of bluetooth!

  Well, the Bluetooth software has been installed on your laptop, BUT the question is:
  Your group has installed Bluetooth card?

  AFAIK the Bluetooth is an option available on this unit. You must check the Device Manager and check the bottom of the unit if the Bluetooth label has been placed.

  I think that you cannot connect your mobile phone because BT is not available.

• No sound through the TV speakers after connecting the dv7 - 1247 cl via hdmi

  I have connected my laptop to my harman kardon receiver via hdmi, which is connected to my HDTV.  The video shows big... looks great. But no sound is coming through the TV speakers.  I went to the audio options and an hdmi output chosen, but still no sound. Any ideas?

  Ty

  Hello

  Take the receiver the most out of the image and connect the laptop directly to the TV. Does your sound work now?  What SW you use for audio/video playback? MediaSmart? Try this also - disconnect the cable - release MediaSmart - plug the cable and then try again.

  Press Fn + F4 to switch to HDMI only. This action refreshes the screen, transfers to the screen from the laptop to the external display and audio now comes from the HDTV sound system.

• Connecting the mobile device

  I'm trying to connect my mobile with my computer at home through cloude. How would I do that?

  Hello Adrienne,.

  Please find the link below for the synchronization of files on devices using Mobile connection:

  Adobe Acrobat and Reader Mobile link: open once, read anywhere

  Thank you

  Abhishek

• Pavilion 15 - ab219tx: Internet slows down after connecting the mobile to WiFi.

  Previously, I had a problem where internet connection slowed down painfully when cell phone charges. I tried to reset the power settings. Now I can connect to the laptop... However, now the problem is that if connect you to WiFi via the laptop, regardless of if its loading or not, the internet becomes ridiculously slow. And if the wifi is turned off, it returns to normal. Help, please.

  . Hi @ARD09,

  Thanks for your reply. I review the post. I understand that drivers are a bit old. I first want to eliminate hardware issues with the computer's wireless card by performing all the steps which are associated software.

  I understand perfectly that WiFi and wired Ethernet connection both seem to be slow.

  A few steps to try:

  • Disable all firewalls and antivirus, including ten windows programs have antivirus programs and firewalls.
  • Try mode safe mode with networking to check if the Internet connection is fast. Try the wired and wireless options.
  • Link to the safe mode with networking is given in my previous post. Please try this.
  • Uninstall the existing network adapters and update the bios chipset network adapters and (wired and wireless) from this link: http://hp.com/drivers
  • Please try to change the channel of the router with another value. Try different channels work. that could help for the wifi only.
  • Try to perform a clean boot in windows 10 using this link: https://support.microsoft.com/en-in/kb/929135
  • Try this link setting network connections in windows 10: https://support.microsoft.com/en-in/help/10741/windows-10-fix-network-connection-issues#network-problems=windows-8 & v1h = win8tab1 & v2h = win7tab1 & v3h = winvistatab1 & v4h = winxptab1
  • Then create a new user profile and try to connect wifi french and using a wired connection.
  • Then as a last resort try to restore system to factory setting and check if that helps after you back up all your files.

  I hope this helps. I would like to know how this happens. I hope the problem is solved without hassle and the unit works very well. I'm always here for you help. Please reach out at any time.

  Just to say thank youPlease click the ' Thumbs Up ' button to give a Kudos to appreciate my efforts to help me. If it helps, Please mark this "accepted Solution" because it will help many other people with the same problem to get it resolved without hassle.

  Now carefully and have a wonderful week ahead.

• Reinstalled XP, now can't connect to internet via modem/router

  With regard to the discussion:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_install/reinstalled-XP-now-cant-connect-to-Internet/2e02ecad-4C19-4CB6-8e48-fc89dd92c487?page=1&TM=1303073424554

  BVSMITH,

  I have the same problem as you did.  Did you find the drivers on the xp installation cd?  I have tried and may not consider the content of the cd, all is well in the list, allowing you to install.

  Any additional help by anyone would be appreciated.

  Tim

  Hello

  · You receive an error message or error code when you try to access the internet?

  · What is the number and the model of the computer?

  1. check the status of the device in Device Manager. Follow the steps for the same thing:

  a. click on start

  b. click Run, in the Run dialog box type devmgmt.msc

  (c) in the Device Manager window, search the map network drive and expand the drive, double-click the sub element to check if an error message or error code is listed.

  You can also check: how to troubleshoot possible causes of Internet connection problems in Windows XP: http://support.microsoft.com/kb/314095

• How to connect the mobile device for windows 7

  I am new to Windows 7. I have a mobile device that runs Windows CE and connects via a serial cable.

  In earlier versions of windows, I could just install activesync on my desktop PC, click on connect on my mobile device and it could connect and visible in windows as a mobile device. Then I could transfer files via Explorer.

  How can I connect to my PC Windows 7? Nothing happens and all I can find is Sync Center (seems pretty useless). I don't really need to auto synchronize files, simply move the files between the two.

  Hi tjf1980,

  Refer to the below mentioned method and check if it helps.
   
  Method 1:
  Microsoft Windows Mobile Device Center replaces ActiveSync for Windows Vista and Microsoft Windows 7.
  Try to download Mobile Device Center 6.1 from the following link:
  http://support.Microsoft.com/kb/931937
  Note: Download the 64-bit version on the above link and check.
   
  Method 2:
  Synchronize music, photos, contacts, and calendars with a mobile device
  http://Windows.Microsoft.com/en-us/Windows7/sync-music-pictures-contacts-and-calendars-with-a-mobile-device
  
  Hope this information helps.

• Satellite M40-237: how to connect the mobile phone with Bluetooth

  I have a new Noki 62333 and I have a Toshiba Satellite M40 - 237. I have a big problem with the connection between them. I put t know how to turn on bluetooth on my pc. Can you help me???

  Hello Iva

  A friend of mine has Satellite M40 and I know that this unit is shipped without BT module. If the unit has BT module, you will find labels of BT on the underside of your laptop.

  To establish a BT connection with his mobile phone that he uses the key USB BT.

  By the way: fact Iva comes from Zagreb, Croatia?

  Good bye