Connecting the mobile device

Similar Questions

• How to connect the mobile device for windows 7

  I am new to Windows 7. I have a mobile device that runs Windows CE and connects via a serial cable.

  In earlier versions of windows, I could just install activesync on my desktop PC, click on connect on my mobile device and it could connect and visible in windows as a mobile device. Then I could transfer files via Explorer.

  How can I connect to my PC Windows 7? Nothing happens and all I can find is Sync Center (seems pretty useless). I don't really need to auto synchronize files, simply move the files between the two.

  Hi tjf1980,

  Refer to the below mentioned method and check if it helps.
   
  Method 1:
  Microsoft Windows Mobile Device Center replaces ActiveSync for Windows Vista and Microsoft Windows 7.
  Try to download Mobile Device Center 6.1 from the following link:
  http://support.Microsoft.com/kb/931937
  Note: Download the 64-bit version on the above link and check.
   
  Method 2:
  Synchronize music, photos, contacts, and calendars with a mobile device
  http://Windows.Microsoft.com/en-us/Windows7/sync-music-pictures-contacts-and-calendars-with-a-mobile-device
  
  Hope this information helps.

• I can't connect the mobile phone as GPRS bluetooth modem

  MSI Wind U100 laptop (toshiba bluetooth module is built in)
  MS windows XP Professional SP3
  Toshiba bluetooth stack 6.30.01

  I can't connect the mobile phone as GPRS bluetooth modem. I tried to connect certain phones. But all the time the same problem:

  After finding mobile phone in the list of available devices, notebook coonects him. But at the same time, "coonecting COM 40 failure, try again".

  I've read about this problem in the user manual, but I am not understand, how to solve a problem.

  PS Sorry for my bad English

  I recommend you take a look at the next document if it has never worked before:
  "How to set up GPRS DUN via Custom Toshiba Bluetooth Stack Mode"
  You can find in the section "how to resources" from the following Web site:
  http://APS2.toshiba-tro.de/Bluetooth/

• Satellite Pro 6100: Bluetooth - how to connect the mobile phone

  I already have a satellite pro 6100 with the bluetooth software on. I tried to connect to my mobile phone without success. The problem seems to be with the laptop rather than the phone.
  How can I connect successfully. I have to update the new drivers? I bought it refurbished 3 years ago and I'm just getting round to the use of bluetooth!

  Well, the Bluetooth software has been installed on your laptop, BUT the question is:
  Your group has installed Bluetooth card?

  AFAIK the Bluetooth is an option available on this unit. You must check the Device Manager and check the bottom of the unit if the Bluetooth label has been placed.

  I think that you cannot connect your mobile phone because BT is not available.

• the mobile device Center can not download!

  I think that I need Windows Mobile Device Center to connect my phone to my PC to synchronize (Vista Home Prem 32 sp2).
   
  Whenever I download, I said I need validation (do not know why, as Microsoft Update works fine) but no worries. When I click on the checkout page (there are alternative to validate means did not), I'm redirected to a generic page of windows
   
  http://www.Microsoft.com/UK/Windows/
   
  I searched this forum, many people seem to have the same problem and they all are sent on the same page, I'm trying, but it still does not work.
   
  Any suggestion is welcome.
   
  Thank you

  Hi Bonalymac,

  Have you tried to download the file in Mode safe mode with network and save it on the desktop? Start in normal mode, and then runs the installation?

• Firefox can be installed on the mobile device Nokia E63?

  I own a Nokia E63 mobile. Please inform if Firefox can be installed on it. That's all there is to it.

  No, only the Nokia N900 Maemo running.
  
  https://support.Mozilla.com/en-us/KB/will-Firefox-work-my-mobile-device#OS=Android & Browser = M6

• problem downloading the Mobile Device Center 6.1

  I am trying to download Mobile Device Center 6.1 and he brings me the validation center and I spoke with the Microsoft Genuine Advantage's Department and told me that my copy of Windows Vista is genuine, but still when I try to download the software, it will validate and upon impact on the agreement, is not bring up the download more. Help, please.

  Hello

  What browser do you use to download the software?

  Reset Internet Explorer settings, then try to download again

  http://support.Microsoft.com/kb/923737

  Note: when you reset Internet Explorer settings, all modules and customizations are disabled, and basically, you start with a new version of Internet Explorer

• Vista to Windows 7 - no internet connection - "the remote device or resource accepts the connection.

  After the form of Vista to Windows 7, the office is connected to the network but cannot connect to the internet. All firewalls are disabled. The other pc on the network works well. I get the message "the remote device or resource accepts the connection.

  There's a way easier than Cody (do not hit you m8, but sometimes things can be simpler)

  Click on start/Control Panel/internet options/connections/LAN. Most likely your proxy is checked. Uncheck it and then reopen internet Explorer. Sounds like your proxy settings are on. I hope this helps.

• How to connect the port device series to the Blackberry without Martin Simulator

  Is there a program that can interface with the Blackberry Simulator to connect to a device connected to the serial port of the computer to simulate a Bluetooth connection?  I can't believe that Martin is the only way to do it.  Martin offers a free demo version sort of their program?  I searched everywhere but found no one.  I don't need a bluetooth receiver real but just the software in order to supply data from serial port to the Simulator (and I guess that convince the Simulator data from serial port to a Bluetooth device).   Thanks for any help that anyone can provide.

  I'm not aware of any device that will help with this.

  Two suggestions:

  (a) you can write some sort of test, that will feed a data script as if it came from a Bluetooth device.  I got it done in the past - it does not test the treatment of Bluetooth, but it allows you to drive the application program.

  (b) it is not really difficult to test on the device.  Little painful to recompile and reload, but if you have a test drilling (a), then you are only testing the Bluetooth part, which you won't be able to test a connection series anyway.

• Volume down 5% after you connect the removable device

  Hello
  A few months ago, I noticed something very strange: whenever I connect a removable device as USB flash or external HARD disk drive or even my smartphone, the volume goes down to 5%, but only to the browser & media player. Can I change the sound volume by using the volume mixer but it's annoying to do whenever I have something to connect to my PC.
  I reinstalled the drivers for my sound card & for each device, I usually connect & also I reinstalled the browser (Opera browser) & Winamp without success.
  Also, I had some problems in the past which could be linked to it. After you install SP1, whenever I am connected to windows I was warned that the Audio Service does not work although it was running. (solved this one).
  Another problem was related to the removable USB devices. Apparently, Windows could not assign letters to all my removable devices, even if I manually assigned a letter to a device of some. I does not solve it, but I use USB remove to assign letters and it seams to work fine so far. ( Windows 7 assigns letters of readers to external hard drives & Windows 7 assigns letters of readers to external hard drives )
  Any ideas?

  Nevermind, I think I got it.

  Control Panel-> sounds-> communication tab-> when Windows detects communications activity-> reduce the volume of other sounds of 80% has been verified

  I went to do nothing and so far it sews and work.

  Do not know exactly why hard drives have been detected as of communication devices, but my guess is that this has something to do with the Winamp/WMP library, because I'm always asked by these 2 apps to add the new device to the library, even if there is no file audio/video/photo on it.

• connect the mobile to internet via modem pc

  My mob: Nokia C2 01
  My laptop: HP
  can connect via bluetooth
  Need: access to the internet on my phone using the modem from the laptop
  Help is appreciated

  Hello

  It is not possible to access the internet on the mobile to the laptop. If your mobile phone supported Wi - Fi connectivity and if you had the wireless internet to your place, then you might have accessed the internet. From your mobile phone does not support a Wi - fi connection, there is no other choice to access the internet outside of the SIM card.

  It will be useful.

• How to determine if the user of the mobile device is looking at a site office?

  Hello

  
  We have activated the Mobile support for a site.  So now, when a user on a mobile device go to the website they see mobile model.

  The mobile template includes a link to the user to view the full site: < a href = "/ index.html? visitorDeviceClass = desktop" > full view of the Site < /a >

  We want to add a link 'view the Mobile Site"on the Office site but only for users of mobile devices.

  We tried to {{globals.cookie}} and {{globals.visitor}} to see if there is something we can watch (using javascript) to determine if we have a mobile user who visits the site of the office.  But it looks like visitorDeviceClass and deviceClass are set to "desktop" for real desktop users and mobile users who clicked on the link "View Full Site.

  We believe that we could be able to watch her User Agent but do not know what OS is displayed for Windows phones and we are not dependent on not user agent.

  Question:

  Does anyone know of a way for us to determine if a mobile device user look at the desktop version of the site so that we can add a link 'view the Mobile site?

  Thank you

  sepyh

  Hey,.

  You can basically determine the device of the visitor to the site in two ways:

  • how Robert mentioned, using the module of system_visitordeviceclass - http://docs.businesscatalyst.com/reference/Modules/General/system_visitordeviceclass.html
  • using globals liquid - {{globals.visitor.deviceClass}} - Globals. Catalyst of business support

  Hope this helps,

  Mihai

• Cannot connect the removable devices to virtual machines

  Hi people,

  I'm trying to connect any device USB to my virtual machine, having read all the guides, I don't see any of my USB dconnected the removable devices tab.

  VMware tools are installed.

  I'm using VMware Workstation - 8.0.6 build 1035888 on Windows 8, 1 - updated with the latest updates.

  

  Can someone help me?

  Thank you

  D.

  Following your response, I found the solution:

  Configuration of Windows compatibility:

  '

• Muse phone site does not display correctly when read on the mobile device, all the tips to solve this problem?

  You can visit the Web at www.conceptfizz.co.uk, office computer works great, but version phone does not charge full-screen, only on the left side. Thank you

  It is no doubt loading the mobile version. Select all items on the page to verify that you haven't left anything on the right side of the page, or the areas encompassing the widgets have not expanded too far - this often happens when you move components.

  David

• Satellite M40-237: how to connect the mobile phone with Bluetooth

  I have a new Noki 62333 and I have a Toshiba Satellite M40 - 237. I have a big problem with the connection between them. I put t know how to turn on bluetooth on my pc. Can you help me???

  Hello Iva

  A friend of mine has Satellite M40 and I know that this unit is shipped without BT module. If the unit has BT module, you will find labels of BT on the underside of your laptop.

  To establish a BT connection with his mobile phone that he uses the key USB BT.

  By the way: fact Iva comes from Zagreb, Croatia?

  Good bye