Connect the Monitor Control Panel program
Try to use the workspace edit CS5.5 in first Pro CC (2015). I have inadvertently undocked from the program monitor Panel but can't seem to get it to dock once again. Window/workspaces isn't an option restore workspace. What Miss me?
Hi Frank,.
Go to Documents and rename the folder 'Adobe' to 'Old.Adobe '.
It resets the older preferences and resets the settings back to default.
Kind regards
Navdeep Pandey
Tags: Premiere
Similar Questions
-
Installed programs do not appear in the Windows Control Panel
I use Windows XP SP3.
When I install a program, in this case my Mustek BearPaw 2400TA more scan, it does not appear in Control Panel. I reinstalled the software of the scanner several times, but still, it never appears in the control panel
Also, is there a way I can have complete control on the control panel? To activate the newly installed programs, etc. ?
Hey bud,
Please write in the Microsoft Community Forums.
According to the description, I see that the Windows Control Panel shows all the programs installed in Windows XP.
I suggest you to follow the article provided to solve the problem:
Incorrectly, Add/Remove Programs tool displays installed programs
http://support.Microsoft.com/kb/266668
Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base.
How to back up and restore the registry in Windowshttp://support.Microsoft.com/kb/322756
Due to operating system Windows or anything related to the printer, feel free to get back to us.
-
HP3070 b611all in a printer: HP3070 unable to scan from the printer control panel
Hello
Although I can scan a document from my laptop I can't do it from the printer control panel.
I tried following the instructions in the Support Center
"HP Deskjet 3070 e - all-in - One Printer Series - how Scan: from the control panel" but I didn't know where I could: ' activate the scan to the computer connection (Windows only).Anywhere there is no mention of "Scan" under settings B3070 only in a separate file, HP Scan on my system...
Thanks for your help so far. I now have much more HP files/programs that I started with. What can delete and to be able to continue to print wireless & scan of the computer, or maybe I should ask what files do I need and I can uninstall.
I ordered the following cable to establish a connection between my laptop and a printer? I hope it is the right one.
USB printer cable lead for HP Hewlett Packard and Lexmark A - B
-
I have a laptop Toshiba Satellite of Win7 64 bit and a HP 8600 Pro Plus,
update firmware and drivers about 2 weeks for the 8600 was a
a long time I have been updated, which is connected wireless has decided to
Direct to print Wireless Setup once the program installation, I tried to do a windows
Print the Test Page in the printer property Panel, somewhat normal for
set up a printerUnder the connection of the conciergerie, I got the error message 0 x 00000057
Under wireless direct printing, I got the same error 0 x 00000057After spending the time to check the settings, connections and asking
Why? I decided to see that if I could print the docs, I print a PDF file,
Notepad and Word documents in each application under the two
configurations without problem.Under the wireless connection, I started the Web Services module
and was able to make the impression within the Web Services Test page
module without problem could not yet do the printing Test Page
in the printer properties panel.I ran Print and Scan doctor who, to my surprise mentioned
a conflict of Driver, I welcomed this program to uninstall the driver,
went looking upward for the driver and the same driver was so done
No download but to remove the driver and reinstalled the driver.
Always error message here.I'm now tempted to delete a direct print wireless and see
What happens if the error disappears, if she does not unstall all
associated with the printer and do a clean reinstall. In case of emergency
is there an alternative to the use of the Web Service module to the setting
When not connected to the wireless network?I think that the Panel of the printer would do this (I'll watch this later
spend enough time on it), or do I need to run Web Services to
direct wireless installation, just think about this, otherwise I'll shoot
a usb cable. Maybe if I install Direct wireless on the printer control panel
the message will disappear as the installation of the printer program, not software
on the laptop?
It is a minor problem since I can still print but question why!
See other issues about this error message I thought
spend my experience with this error.
Always had a number of things to think and try, once again.
If your getting this error message I would suggest trying a test page printed
within the module of Web Service to see if the message developed.
Could not back the driver so I removed the printer driver
by deleting.
19/07/2011 Date print driver
Print driver version 26.0.0.0and removed software in Add and Remove software Hp also had to turn
disable the wireless module directly on the printer to reinstall from the CD.
Reinstalled printer/software form the CD supplied with the printer, the
Driver date is 08/12/2009 Ver.9.0.0
No more error in configuration.
is the answer to the error message 0 x 00000057 or 0x00000xx
associated with the driver? Or just the 0 x 00000057?
Could not find a list of drivers between the driver and
the driver on the CD.
Will not update the driver for a good while or until I have too.
The dates on the drivers are only about two years apart, the
The version numbers are an issue questable.
-
Get the error when you try to manually create a restore point in Vista 32 - Bit - System - Protection of the system control panel.
Got the unable to create the specified taskHello
What is the exact error message received when the problem occurs?
Methood 1:
Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps in the following link:
How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
http://support.Microsoft.com/kb/929833
Method 2:
You can start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
I suggest to put the computer in a clean boot state, and check if the problem persists, see the link:
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: See step 7; Reset the computer to start as usual after troubleshooting is performed.Method 3:
You can temporarily disable the security software and check if the problem occurs. Check out the following link to do the same thing:
http://Windows.Microsoft.com/en-GB/Windows-Vista/disable-antivirus-software
Warning: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
I hope this helps! Let us know if you need more assistance.
-
Find the nvidia Control Panel after installed of new Vista Business (Spack2)
Recently installed the new hard drive and therefore had new Vista Business installed (downloaded, with Service Pack 2). The Nvidia Control Panel is 'gone' if I can is more set up two external monitors + for computer laptop is to say as a "clone". PC automatically to an external monitor as soon as plugged in. When I connect to an HDTV, it's same with a resolution of crazy. Any advice?
Thank you
Hello
· You have installed the drivers for the graphics card from nVidia?
Once you install the drivers for the graphics card, it automatically installs the nVidia control panel. If you had bought the graphics card, you may have been provided separately with a DVD, check also in the DVD provided with control panel map.
To download the latest drivers follow the link given below.
http://www.nvidia.com/download/index.aspx?lang=en-us
Hope this information is useful.
Amrita M
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
Computer freezes Vista, get the error of the audio control panel has stopped working
my computer is running windows vista Home premium and after it starts and connects to the home screen, it immediately freezes and it says the audio control panel stopped working and the mouse and the keyboard does not work
Reference Dell inspiron 5305 windows edition running Home premiumHello
I suggest you to follow these steps and check if that helps:
Method 1:
Start the computer in safe mode and check if the same problem occurs:
http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode
Method 2:
Try to perform the clean boot and check if it helps:
http://support.Microsoft.com/kb/929135
NOTE: When you are finished troubleshooting, make sure that restore you the computer mode normal startup such as suggested in step 7 of the above article.
It will be useful.
-
After you have installed the Rosetta Stone, the Windows Control Panel has stopped working
After installing my rosetta stone program whenever I'm going to use. It shows the windows control panel has stopped working and cannot read the cd
After installing my rosetta stone program whenever I'm going to use. It shows the windows control panel has stopped working and cannot read the cd
Hey dododododo5
you would like to check the exact version of the Rosetta stone that you try to use the vista Compatibility Center in the microsoft link below
Rosetta stone version come as being incompatible with vista in the below link vista Compatibility Center
If necessary, read the action recommended in the link below microsoft
If your version of the Rosetta Stone is incompatible vista you can try to install as it is shown in the link below compatibility mode
http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-compatibility-mode/
Walter, the time zone traveller
-
After update for first Pro CC 2015.3 I can not move the values in the effect controls panel
Hello!
After update for Premiere Pro 2015.3 of CC, I can't change the value of the property in the effect controls panel by dragging left or right when you move the pointer over the underlined value. The two small arrows appear, but nothing happens when I drag them and it is so annoying. I tried now pressed the SHIFT key and several others trying to drag, but it makes no difference. I restarted the program and my computer but still no difference. All the patches?
Thank you!
Hello Ann,.
I found the problem, it's my wacomtablet. When I use the magic mouse, it works great! So, I guess I should update the wacomdriver, perhaps. If your response gave me the idea to check for this. Thank you!
-
The audio control panel does not show simply. On this site, I should see the control panel. http://www.testplek.annemariebeeke.nl/huiswerkopdracht_week3_bonus.html.
It does not show in the other browsers, other people can see it, but I can't.
Even with these sites:
http://www.jokevan.nl/HTML5/oef3-3.html
http://kokenvoorpapegaaien.nl/Kellerhuis/oef3-3.htmlReload Web pages, and ignore the cache.
- Hold SHIFT and click reload.
- Press 'Ctrl + F5' or 'Ctrl + Shift + R' (Windows, Linux)
- Press 'Cmd + Shift + R' (MAC)
Clear the cache and cookies from sites that cause problems.
"Clear the Cache":
- Tools > Options > advanced > network > storage (Cache) offline: 'clear now '.
'Delete Cookies' sites causing problems:
- Tools > Options > privacy > Cookies: "show the Cookies".
Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance/themes).
- Makes no changes on the start safe mode window.
- https://support.Mozilla.org/KB/safe+mode
-
I can't find the touchpad Control Panel
I can't find the touchpad Control Panel.
@ejake
Hello
Download and install the driver for the Touchpad ALPS to here.
-
T430: Cannot change the GPU using the NVIDIA Control Panel
Hello world
I recently bought a T430 including a NVIDIA NVS 5400 M. games graphics card (for example, Max Payne 3) used to run fast, using the NVIDIA GPU. Today, I tried to play a video game once more (after having not played for several weeks). Unfortunately, my OS (Win7, 64-bit) assigns the GPU from Intel, resulting in a much lower speed. Using the NVIDIA Control Panel, I can't change my favorite GPU (changes will not be saved). I already run a update of Lenovo and installed the latest graphics driver (296.88), which resulted in no improvement.
When you start a game, I can choose my graphics manually, but I would like to configure some general settings using the control panel.
Do you have any solutions?
Thank you very much.
-
The same thing happened to me recently: the hand left panel doen't show the usual "Control Panel Home" switch and my control panel display is stuck on the classic view. Click on "Show common tasks in folder" but that doesn't change anything. Finally, I tried a restore without success point. No idea how to get back the link "control Panel Home"?
Thank you very much for your support
Alain Truchat
Split from here:
Hi, Alan.
Reset Control Panel-
Press Windows key + R
Type inetcpl.cpl regsvr32.exe/n/i
Press ok -
Original title: could not open the Java Control Panel
I just downloaded a new update of Java 6 and it doesn't work. I use Java to view charts & graphs of changes in the stock market & it works with applications that I used before, but not for that I started to use after the new update has been installed.
I tried to fix it by clicking on the Java Control Panel & I get this message:
Class main com.sun.deploy.ControlPanel is not found
How can I fix?
Hi Chris240560,
Try to Uninstall and reinstall java and check the result.
For further assistance, we recommend you to make contact with The team of Support of Java for better assistance.
Visit our Microsoft answers feedback Forum and let us know what you think.
-
After you disable the speakers in the Sound Control panel, how to re-enable?
On Vista 64-bit with latest updates, in a hurry to catch a signal continuously with the sound only through headphones, I turned off one of the entrances in the sound control panel, which was the laptop speakers. This was done by selecting the element and selecting Disable in the right click menu. When I come back to this Board for re - activate the speakers, they are listed is no longer and are not doing a scan for the hardware. How can we reactivated the speakers?
The audio device is "SoundMAX Integrated Digital HD Audio", and the computer is a Lenovo Thinkpad T61P.
Hello
Right click speaker near clock - reading devices - right click in the area of the boxes - check see the disabled and disconnected devices. Select speaker, then on the right click lower properties check the settings for the active device usage and so on. Also do the same to set up in the bottom left of this box.
I hope this helps.
--------------------------------------------------------------------------------------------
Rob Brown - Microsoft MVP<- profile="" -="" windows="" and="" devices="" for="" it :="" bicycle="" -="" mark="" twain="" said="" it="">->
Maybe you are looking for
-
while I place my HP M125nw Printer Setup ends after posting the message as pictured. Please help on this issue.
-
have 425 dn which is network. Can get a computer tray see 3, but other computers cannot
have 425 dn defined as network printer... Can get a computer tray see 3, but other computers cannot. How can I get others to see tray 3
-
Can not find the driver of scan to PRINTER ALL-IN-ONE KODAK ESP 5210
Can not find the driver of scan to PRINTER ALL-IN-ONE KODAK ESP 5210. Device Manager says last driver is installed. Moved from feedback Original title: scan driver
-
When to use "Run as Administrator"?
Hello I have Vista Home Premium on a pc where I am the only human user. My Vista account seems to be an "Administrator".I have UAC on, but the 'silent mode' value using a tool called TweakUAC. Recently, for one reason or another, I became somewhat ob
-
I am running Windows 7 and you want to back up to a 32 GB USB key. Although I insert the memory stick into a USB port on my computer don't see or does not recognize. What should I do?