Connect to a pool from the local server view automatically

Similar Questions

• How to move all e-mails from the imap server to local folders automatically for each mail?

  Hello

  I want to transfer all my e-mails in local folders as soon as they arrive in Thunderbird and remove them from the server. I can do this manually by moving the mails to hand, but I want to do it automatically by Thunderbird.

  After a few hours, I found there is an option on the removal of e-mails from the mail server, if I use POP3, but it is not an option for IMAP.

  Important note: my mail can not be resolved like POP3, so please don't segguest implementation using POP3.

  Thanks in advance.

  http://KB.mozillazine.org/Filters_%28Thunderbird%29

• Unable to connect to the console BAM from the second server

  Hello
  
  I have 11.1.1.3.3 BAM, running with 2 managed servers (cluster). I created a user on the WLS console with the DefaultAuthenticator method.
  
  I associated the grid of BAM control this user as architect of the report.
  
  I can connect to OracleBAM applications on a server, but from the second server I get the error:
  
  BAM-00223: service oracle.bam.adc.common.core.IDataStore
  What it could be?
  
  TX

  You have configured the BAM cluster in active-passive mode. Given that the BAM server has not supported active active configuration.

  Looking at the error, it seems that the BAM Server attempts to start on the other node. Please follow the SOA HA to set up passive active BAM documentation.

  THX
  Ritesh

• VMware workstation 8 briged connection cannot get an ip address from the dhcp server

  Hello, I hope someone can help me with this problem, my virtual machines are unable to obtain an ip address from my dhcp server in windows server 2008R2.

  VMware workstation 8 is running in windows 7 proff. 64-bit OS. My gets physical computer an ip Server dhcp without problem have access to the internet and everything works fine, but my VMs for some reason any cannot obtain an ip address from the DHCP server.  I updated virtual nework Briged editor one of my physical network interface cards. Then I put my VM NIC to briged in for some reason my VMs are unable to obtain an ip address. The ips only I get are 169.254.43.129 Add 255.255.0.0. any help would be very happy. Thank you very much.

  FYI - you have posted some of the vmware.log

• Computer disconnects from the local network after a while

  Hello

  the place I work has a local network with nearly 20 computers.
  One of them is used only to receive some PDF files from the scanner and there our database (PostgreSQL).

  The problem is that, after some time we can not access it via Explorer by typing '\\server' on the address bar, but the connection to the PostgreSQL Bank will continue to operate.

  I have already disabled the drive for energy savings computer network mode.

  What can happen and what can do?

  Thanks in advance,
  Felipe Sousa

  Hi Felipe,.

  Thanks for posting your query on the Microsoft Community.

  According to the description, I understand that your computer disconnects from the local network.

  I suggest you post your query on the TechNet forums , because we have experts working on this type of questions and for you help the better.

  Check out the link:

  https://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro

  Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.

• AWM 11 g Client to access the site from the local office

  Hi David,
  
  Is it possible to use the MN as a client. For example, I have a virtual machine where I can access AWM for 11g after launching the file AWm.bat of the remote server. However, there is limitation of the terminals for multiple users remote desktop so if developer want to access the workspace even on his local computer is feabile to start the installation from the local computer and leave the same AW interface with all the workspace pre-built and etc. ?
  
  Thank you very much
  Paiva

  Are asking you if you can run AWM on a laptop, say and have access to a database on another server instance? If so, then the answer is Yes. You can run AWM on any Java compatible machine until it can connect (via JDBC) to the server. This can be a problem if you have a firewall.

  If you ask if you can have multiple instances of AWM open at the same time, while watching the same AW, so it's more difficult because AWM attached the AW in read/write mode. There is a solution, but it is not recommended because the various SGF can get out of sync with the AW itself.

• NB200-h-13 - no response from the DNS server and gateway

  Hello

  I have netbook NB200-h-13 with XP SP3. Its impossible to connect to wireless internet and the error messages are
  HE DIDN'T THERE WAS NO RESPONSE FROM THE DNS SERVER
  HE DIDN'T THERE WAS NO RESPONSE FROM THE DEFAULT GATEWAY

  The connection with the ethernet cable is ok with the adpter reltek that also adpter atheros ar9285 WiFi is activation, working properly and the modem router signal is strong.

  Hi abk55,

  What program you receive this error message?
  Have you tried another browser, for example Firefox or Opera?

  I guess it has something to do with your wireless network card or WLAN parameters if the LAN cable is working properly. So you should try to update the WLAN driver on the Toshiba site.
  Also, try to disable the filtering of MAC addresses and use another encryption.

• Client DHCP is unable to get a valid IP address from the DHCP server.

  Client DHCP is unable to get a valid IP address from the DHCP server. I have a home edition of Windows XP attempts to connect to my router wirelessly with wireless or wired connection but I get an error in Event Viewer with the discription DHCP 1007 error message. From what I researched, I discovered that the DHCP service depends on the AFD, TCP/IP and NetBT services. All these services are correctly place and worked very well (even the DHCP service is running without error) but every time I try to release/renew my IP address I receive than DHCP warning in the case where the viewer and I just cannot get a valid IP address of the server (router) I also have one of these verizon wireless G3 usb adapters and it works fine. I also have a good ping back when I try to do a ping localhost (for the closure) I also tried the preinstallation of uninstalled drivers from the adapter/s and nothing works. The only entrees in the registry for DHCP error are also AFD, NetBT and TCP/IP nothing else there, also all the files in the/system32/drivers afd.sys netbt.sys and tcpip.sys in addition to solve the problem, I'll mention that I installed and reinstalled Northon earlier, I do not remember if the problem appears before or after that. I receive also any error or warning in the security log or at least I don't know how to read: P

  Thanks in advance

  Thanks for the information.

  I hope you know that it is risky to connect the laptop to the Internet with no firewall and no antivirus... If this laptop is already connected to the Internet in this State, he is perhaps already infected.

  You said you know the router works because the other computers can connect successfully to it.  You should check the configuration of the router to make sure that it is not configured to limit the number of IP address it supplies, and (b) it is not configured to filter users by MAC address.

  When this laptop is connected by Ethernet, even if he gets the IP address of 169.254.x.y, can you ping the router?  Find the IP address of the router on any computer connected to it by running the ipconfig command in a command prompt window.  The "default gateway" is the IP address of the router.  Run the ping command in the command prompt window as well.

  If the ping is successful, it is possible that you might be able to use an IP address in the correct range for an Ethernet cable (but I doubt that it works for the wireless).

  It is very difficult to cite anything in this forum.  If you click on the link "Reply citing", all of the message to which you are replying is quoted.  You can copy the citation and delete parts of it, but it is not very user friendly.

• No response received from the Symantec Server during activation.

  OT: Network network adapter Ethernet NIC wireless networking device
  I just bought Norton 360 5.0 and I can't activate it by Symantec.  An error saying "No response received from the Symantec Server" I have no internet connection, but do not understand why this happens?  This computer is Windows 7 Home Premium.  It is connected to Linksys wireless - G wireless adapt, but as I said I am able to get on the internet like MSN, Facebook, etc.

  Hi LaraAngold,

  I suggest you try the following steps:
  https://solutions.Symantec.com/sdccommon/ASP/symcu_defcontent_view.asp?ssfromlink=true&sprt_cid=c64ef7a8-111C-47d7-88ef-b8e50c5cbd0f&docid=20071025144354EN

  If the above steps fail, you will need to post your question in the following forums.
  http://community.Norton.com/

• Debugger disconnected from the local process. IntegratedWebLogicServer stops

  Hello

  Get the following error message when you try to debug page. Help me about this

  < 26 August 2015 13:23:10 IST > < error > < security > < BEA-090892 > < loading of the OPSS java security policy provider failed because of the exception, see exception stack trace or the root server log file. If still don't see no obvious cause, turn on debugging of the flag - Djava.security.debug = jpspolicy for more information. Error message: cannot read the policy store. Reason is the error PolicyStore javax.xml.stream.XMLStreamException: ends the Document concluded prematurely. >

  < 26 August 2015 13:23:10 IST > < critical > < WebLogicServer > < BEA-000386 > < server subsystem failed. Reason: weblogic.security.SecurityInitializationException: loading of the OPSS java security policy provider failed because of the exception, see exception stack trace or the root server log file. If still don't see no obvious cause, turn on debugging of the flag - Djava.security.debug = jpspolicy for more information. Error message: cannot read the policy store. Reason is the error PolicyStore javax.xml.stream.XMLStreamException: ends the Document concluded prematurely.

  weblogic.security.SecurityInitializationException: loading of the OPSS java security policy provider failed because of the exception, see exception stack trace or the root server log file. If still don't see no obvious cause, turn on debugging of the flag - Djava.security.debug = jpspolicy for more information. Error message: cannot read the policy store. Reason is the error PolicyStore javax.xml.stream.XMLStreamException: ends the Document concluded prematurely.

  at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadOPSSPolicy(CommonSecurityServiceManagerDelegateImpl.java:1398)

  at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1018)

  at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:873)

  at weblogic.security.SecurityService.start(SecurityService.java:141)

  at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)

  Truncated. check the log file full stacktrace

  Caused by: oracle.security.jps.JpsRuntimeException: cannot read the policy store. Reason is the error PolicyStore javax.xml.stream.XMLStreamException: ends the Document concluded prematurely.

  at oracle.security.jps.internal.policystore.xml.XmlPolicyStore.buildFromFile(XmlPolicyStore.java:496)

  to oracle.security.jps.internal.policystore.xml.XmlPolicyStore. < init > (XmlPolicyStore.java:276)

  at oracle.security.jps.internal.policystore.xml.XmlPolicyStoreProvider.getInstance(XmlPolicyStoreProvider.java:100)

  at oracle.security.jps.internal.policystore.xml.XmlPolicyStoreProvider.getInstance(XmlPolicyStoreProvider.java:74)

  at oracle.security.jps.internal.core.runtime.ContextFactoryImpl.findServiceInstance(ContextFactoryImpl.java:139)

  Truncated. check the log file full stacktrace

  Caused by: oracle.security.jps.JpsRuntimeException: javax.xml.stream.XMLStreamException: ends the Document concluded prematurely.

  at oracle.security.jps.internal.core.datastore.xml.XmlDataStoreParser.getDataStoreEntryStax(XmlDataStoreParser.java:166)

  at oracle.security.jps.internal.core.datastore.xml.XmlDataStoreParser.getDataStoreEntry(XmlDataStoreParser.java:180)

  at oracle.security.jps.internal.core.datastore.xml.XmlDataStoreParser.getDataStoreEntry(XmlDataStoreParser.java:187)

  at oracle.security.jps.internal.core.datastore.xml.XmlDataStore.loadXmlDataStore(XmlDataStore.java:411)

  to oracle.security.jps.internal.core.datastore.xml.XmlDataStore. < init > (XmlDataStore.java:276)

  Truncated. check the log file full stacktrace

  Caused by: javax.xml.stream.XMLStreamException: ends the Document concluded prematurely.

  at oracle.security.jps.internal.policystore.xml.StaxPolicyStoreParser.processFunction(StaxPolicyStoreParser.java:2186)

  at oracle.security.jps.internal.policystore.xml.StaxPolicyStoreParser.processFunctions(StaxPolicyStoreParser.java:2072)

  at oracle.security.jps.internal.policystore.xml.StaxPolicyStoreParser.processAppPolicy(StaxPolicyStoreParser.java:796)

  at oracle.security.jps.internal.policystore.xml.StaxPolicyStoreParser.processPolicyStore(StaxPolicyStoreParser.java:521)

  at oracle.security.jps.internal.core.datastore.xml.XmlDataStoreParser.getDataStoreEntryStax(XmlDataStoreParser.java:120)

  Truncated. check the log file full stacktrace

  >

  < 26 August 2015 13:23:10 IST > < opinion > < WebLogicServer > < BEA-000365 > < changed failed State Server >

  < 26 August 2015 13:23:10 IST > < error > < WebLogicServer > < BEA-000383 > < is not an essential service. The server will shut down >

  < 26 August 2015 13:23:10 IST > < opinion > < WebLogicServer > < BEA-000365 > < server status changed to FORCE_SHUTTING_DOWN >

  [IntegratedWebLogicServer Instance server stops.  All running applications will be terminated and canceled.]

  Process is complete.

  Debugger disconnected from the local process.

  [IntegratedWebLogicServer Instance server stops.  All running applications will be terminated and canceled.]

  Thank you

  Krishna

  Hi Cvele_new_account

  Thanks for the reply.

  I tried that, but he helped me. Finally I deleted the DefaultDomain file under the following path to get rid of the question

  C:\Users\Username\AppData\Roaming\JDeveloper\system11.1.1.6.38.62.29

  Thank you

  Krishna

• CSS style sheet appears on the remote server when I download my Web site, but it works very well to the local server

  CSS style sheet appears on the remote server when I download my Web site, but it works very well to the local server, if anyone can help I would be grateful.

  There are major problems with this page as shown in the screenshot below.

  

  This is caused by a liberal hijacking of APDivs (aka layers) for a main page layout.  This isn't what APDivs were intended.  That's why Adobe them removed from DW.  Unfortunately, not soon enough.

  I think you're the best option is to start over with a pre-built CSS layout that doesn't contain positioned elements.

  Either way, Flash is dead now.  Most of the people cannot display Flash media more.  You can convert the HTML5 video or use YouTube to host videos now.

  Nancy O.

• Loggin to the administrator of the remote site redirects to localhost on the local server.

  This is certainly news to me. I created a Wordpress site locally and then uploaded to the remote server. For some reason when I connect I get redirected to the local host and the version installed locally in XAMPP. I tried to clear the cache in Firefox, but nothing helped. When Apache and MySQL are disabled in the XAMPP Control Panel, he always tries to redirect to the local server and I get the error "problem loading page".

  Also, strangely, when I disable XAMPP the CSS for the site on the REMOTE server is not displayed! Any ideas short of clear and start over? I can't even to the admin of the site to change the password.

  The fixed. Had to manually change the siteurl value in the table options in the remote database. Thank God...

• How can I stop CS4 announcements from the ad server calls?

  Hi people... I ran patience trying to figure this one, so I hope someone can point me in the best direction.

  When I insert a page in Dreamweaver CS4 from the local folder on my hard drive, Google ads on the page are always re-downloaded directly from the ad server. Changing in Live View is also, as just preview a page stored locally in a browser. I would like to stop this because if I add printing on my website ads it could look like I was deliberately clicking around my own site to increase the visits and revenue.

  For the moment, all changes to pages are made locally and uploaded only when I choose. I met talk farm premises, or something, and I wonder if this is the way to go. I got the idea (I think) but I don't know where to start and if I could do without the many weeks of work and headaches for whether or not it is the solution. Is there an easy way to make CS4 just use the ads to the local cache? Or another easy solution?

  Thank you

  Brian

  bluelaich wrote:

  When I insert a page in Dreamweaver CS4 from the local folder on my hard drive, Google ads on the page are always re-downloaded directly from the ad server. Changing in Live View is also, as just preview a page stored locally in a browser. I would like to stop this

  On the view menu, see if there is a check mark next to the display of the external files. If there is, click it to turn off the option. This should stop Dreamweaver to download something that is not on your local system.

• When the local server access security warning

  As I said in another post, I am a software developer with 14 years of experience in the development of the desktop application and a bit of web development.  I'm learning the Flash rather than Flex because it's the environment that I own.

  I'm running my first real Flash/AS3 movie and in it, he attempts to access a server local Apache with this call:

  new URLRequest ("http://localhost:8042 / backend.php" ' ");

  When I run it in the debugger, I get the message of security seen in the first screenshot. I went to settings and added localhost, see the second screenshot, but the safety message persists, even after restarting the machine.

  How I this test code and debug it to get the data from the local web server?  This is really critical, because I'll eventually develop a RIA that retrieves all of its data in this web server.

  Sam

  

  

  in the Settings Manager, click locations to change, add a folder and navigate to the folder that contains the files flash for this project.

• Logon sqlplus from the database server do not.

  I want to export data from the a database. I can sqlplus as a particular user (owner of the table) from a remote server. But when I try to sqlplus or run the exp from the database server (the server where the database is running), I refused to sign. Is there a configuration in the database in order to prevent this loggin user from the database server
  
  /U01/Oracle/app/product/10.2.0/DB/bin-> sqlplus testuser / *.
  
  SQL * more: release 10.2.0.3.0 - Production on Thu Apr 29 14:28:30 2010
  
  Copyright (c) 1982, 2006, Oracle. All rights reserved.
  
  ERROR:
  ORA-01017: name of user and password invalid. connection refused
  
  
  /U01/Oracle/app/product/10.2.0/DB/bin->. / testuser exp / * file=/tmp/interface.dmp tables = interface
  
  Export: Release 10.2.0.3.0 - Production on Thu Apr 29 14:28:53 2010
  
  Copyright (c) 1982, 2005, Oracle. All rights reserved.
  
  
  EXP-00056: ORACLE error 1017
  ORA-01017: name of user and password invalid. connection refused
  
  
  TIA
  Ravi

  Try this.
  1. the cd in your home directory.
  2. starting at the prompt, so source oraenv
  -> . oraenv
  3. When prompted enter the name of your database, in the same case, as in/etc/oratab.
  4. try to connect now
  -> sqlplus testuser / *.

  If it works for you, then you must ensure you environments ORACLE_HOME, ORACLE_SID and path are correct - as oraenv does for you.