Connect to a wireless printer

Similar Questions

• Photosmart more B209a_m: Virgin Super Hub does not connect with the wireless printer

  We recently upgraged to a new blank media 3 hub, the printer is connected to a Hp Windows Vista desktop via USB, other devices (laptops and tablets) could access the wireless printer when the computer is turned on.

  I also created the same printer to be used wireless by the other devices without the Office of marketing, it was a pain having to keep it logging on when he fell asleep. The printer had a different name if you are using one.

  After that the hub of the Virgin was installed I can is no longer using the printer without the Office being wireless, the new Center can not find the printer connects as is done before that other laptops, I had no problem with my old hub and a separate router.

  I've tried everything as suggested by Virgin (not much there) and reinstalled my drivers for the printer. Any suggestions what I can do?

  Hi @Confused_Nanna,

  Welcome to the HP Forums!

  I read your post about how you cannot connect your HP Photosmart b209 printer to your wireless network. I'm happy to discuss this issue for you!

  Please, try the steps in this guide, printer is offline (Windows) as well as this guide, the printer is not maintaining the wireless connection.

  If you are unable to reach a resolution, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

  I hope that this post helps!

• Cannot connect HP 6520 wireless printer to my network.

  Unable to connect wireless HP 6520 network printer, wireless or via USB of Airport Extreme base.  End of 2014 iMac, 24 Gig of RAM, 1 TB of merger, El Capitan 10.11.4 drive; Last generation airport extreme network (ethernet) for a second Airport extreme, which in turn is connected to an Airport Express and also connected to a 2nd Airport Express wireless.

  Have you plugged the printer on the computer directly and made sure it works thus insured that you have the correct drivers for it?

  Try using wireless as it works much better than USB.

  The closest airport to the location of the printer, turn on WPS to printer via the airport utility.

  Do not use the PIN method... HP printers will not pin code work, you must use the first attempt. Then on the printer itself less than 1 min start the WPS connection for the wireless...

  Tell me if it does not work.

• I'm unable to connect a Canon wireless printer to my Time Capsule / Airport utility

  Looking for advice on how to connect to a Canon wireless printer to my wireless (Time Capsule).  Airport utility does not see an option to add a WiFi printer.

  If you are referring to the method of adding a printer WPS...

  Open AirPort Utility

  Click on the image of the time Capsule

  Click the Edit button in the window that appears

  Click on the menu of The Base Station ... up where you see the icon Apple, file, window, help and other menus at the top of the computer screen top

  Click Add a WPS printer

  

  There are two methods available... . First of all try (which is identical to a button press the Time Capsule) and PIN, using a code. Choosing the right method according to the instructions provided in the installation Guide for your printer.

• Connect to a wireless printer lost after installing Microsoft XPS Document Writer

  Microsoft XPS Document Writer was installed on my PC via execution of updates automatically. Now, I have it on my PC and when I need to print any document that I can't find my printer Epson Stylus wireless by default instead I Microsoft XPS Document writer who now appears as my default printer and Microsoft Office Document Image Writer. Cannot find my printer wireless devices & Printers. Frustrating because I can't print any documents. Do I have to reinstall my printer wireless? Please can you help me?

  Hello

  Thanks for posting in the Microsoft community!
  You have reached the right forum for your question.

  1. what happens when you try to print?
  2. you receive an error message?
  3. What is the brand and model of the printer?

  Method 1:
  You can try the steps in the link and check.
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Method 2:
  You can temporarily disable the antivirus on the computer and check if you are able to print.
  NOTE: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks

  Method 3:
  You can uninstall and reinstall the wireless printer and check.
  Check out the link and check.
  Resources for the resolution of the printer in Windows XP problems
  http://support.Microsoft.com/kb/308028

  Just reply with the results. I'd be happy to help you more

• My Windows XP laptop will not connect to my wireless printer or other computers.

  I have a home network, an xp connected to a router, an xp the top with wireless and a wireless printer.  Until recently all worked OK.
  My the top now connect not to do anything, not to the printer, the top or the i'net.  In network connections on the top, the network connections icon has an X on it.
  I tried several methods but still cannot connect to the the top.
  Any suggestions?
  Richard

  original title: Windows XP Home network

  Hello

  1. what exactly happens when you try to Internet or printer via a wireless connection?

  2. you receive an error message?

  3. What is the brand and model of the printer?

  4. don't you make changes to the computer until the problem occurred?

  I suggest you to follow the steps below and check if it helps:

  Method 1:

  Wi - Fi and in Windows network connection issues:
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  How to troubleshoot a network home in Windows XP: http://support.microsoft.com/kb/308007

  Method 2:

  Printer in Windows problems: http://windows.microsoft.com/en-us/windows/help/printer-problems-in-windows

  Hope this information is useful.

• Connect to a wireless printer 3510 to the internet after changing the wireless modem

  How can I get my printer wireless HP Deskjet 3510 for reading / connect to a wireless modem? I had a Belkin router with the modem and replace them with a wireless modem so I wouldn't have to have a router and the modem. Now, I can't get my wireless printer to connect to the internet. What I am doing wrong?

  Hello

  Please follow the instructions below to fix:

  http://www.HP.com/global/au/en/wireless/reconfiguring-system-Help3.html

  Kind regards.

• HP 7520: Connection to the wireless printer

  I just put my HP 7520 for wireless printer to my Pavilion a6600f and it works very well.  Is it possible to connect my laptop Toshiba Satellite (it currently connects to my WiFi very well) to the printer wireless so I can print from the laptop in a room to the printer in another room?

  You said that you wanted to install the right of the printer?  At HP, naturally.

• Do not connect not not Wireless printer HP officejet 4620

  My printer was working properly until I tried to set up the e-printing. Now my printer is not connecting on the wireless network at all.

  The wireless doesn't stop flashing light will not allow any connection between the router and the printer.

  Wireless Network Test results

  * Make sure your wireless router is powered

  * Make sure that your printer HP network name (SSID) exactly matches the router (SSID) wireless network name

  * If they do not exactly match, run the Wireless Setup Wizard to set up your HP printer

  I am unable to make one of these troubleshooting steps, because the wireless radio is not remaining on to connect to the network.

  I just need to get the printer connect to the home network so that I can take any futher troubleshooting steps

  Thank you

  Help me please

  Reset the printer to Factory Defaults network.  Now go back and reinstall your printer again.

• Connection to a wireless - printing Via Ethernet network?

  Hi, I had a search here but you can't find what I'm looking for, sorry if it was taken!

  I just bought a HP C310a wireless all in one, very happy so far.

  I connected my Netgear DGN2200 wireless, job done. I printed the test page and all is well.

  I'm now trying to set up my PC to print through my router via an Ethernet connection, but I've hit a brick wall!

  I tried to connect via usb and then try to go wireless, but it will not find the printer. I have also run the program quotes but it does not find the printer?

  Any ideas please?

  Thank you.

  OK, another problem as well!

  I just tried to connect with my wireless laptop and it failed. Looks like maybe that's a problem with my Netgear router?

  This rule!

  Just in case anyone else has this problem, it was down to my speed on my router settings. Speed has been set to "up to 300' and I reduced it" up to 145', and it worked very well, both wireless and ethernet. "

• How to connect a USB-wireless printer to a wireless network without PC

  Some HP printers do not have a Wizard of wireless configuration integrated into the façade to connect to a network.  These models install to a computer via a USB connection and the software then sends information wireless via the USB cable to the printer.  However, you do not always have a present computer and still need to connect these printers to a wireless network.  You can use a wireless, like an iPad device, to do this.  For the example below, I used an iPad and a printer Deskjet 3510.

  The first step is to make sure that your printer is aired at an (Ad Hoc) network.  To do this, turn on the printer and press the wireless or wireless Tower, and then in the Setup menu. Connect the iPad (or other wireless device) to the signal being broadcast by the printer wireless.

  Once the iPad is connected to the printer as long as a network connection, open the Web browser on the iPad.  Type 192.168.223.1 in the address bar and go to this site.  Printer status page should load and look like the picture below.

  

  Click the network at the top of the status page.  You can get a quick warning while being redirected to an HTTPS site.  Click Ok in the message box to continue.  When you click OK, you can get a warning about the identity of the server or the certificate.  Select the option that allows you to continue.  The wording can vary from a browser, but there should be an option to continue anyway.

  Network status page should now be loaded at this point.  Select Assistant wireless to start the installation of the wireless network and click Next.

  

  When then is selected, it must list the available wireless networks.  Select your network from the list and click Next.  When the network is selected, it should be noted.

  Enter the network password if necessary and click Next.

  

  A message should be received indicating the name and if security is enabled.  The message below which must indicate that the settings have been saved successfully.  If it indicates that the settings were saved successfully with an error, the configuration of the network is more than likely operation.  Click Ok at the bottom.

  

  After selecting OK, select status to check that the printer is connected successfully.  It may take a few minutes for light wireless to the printer to stop flashing.  Once it is a solid blue, the printer must be on the network and operation.

  

  Once this is over, then you will be able to reconnect to your wireless (wireless router) normal signal for internet access.  Now, the iPad and the printer are on the same home network.

  I hope this helps.

• Connect ipad to wireless printer

  I think purchaing an ipad and I was wondering if I would be able to connect to my printer HP Deskjet D5560 wireless. I change the firmware of the printer to do this? Thanks for any help.

  Hello

  Based on the following link, the series d5500 has been added doesn't support that "HP ePrint mobile app. You may be able to print from the iPad using Google print clouds.

  Kind regards

• Unable to connect to my wireless printer after changing my internet router

  I recently had an upgrade of the router and the printer now appears offline. The new router has a different password but I don't know how to change the settings of the printer so that the printer to access the new network.

  Please notify

  Hello

  Please follow the steps below.

  (1) reset default networks by selecting settings > wireless Menu > restore defaults

  (2) turning on wireless on the Printer Setup Menu > Wirless Menu > Wireless > on

  (3) If Windows click Start > HP > printer name > Setup printer > new window opens, select Connect a new printer and follow the instructions on the screen

• Router to connect to a wireless print server

  I just got my EA3500 router. This work is very well but I can't connect the router to my WPSM54G print server. I tried DHCP IP, IP manual, for security, I tried WPA and WPA2, and nothing. How can I solve this? TKS, Antonio

  First, turn off the firewall and Antivirus on your computer and re-run the Setup program on your computer...

  If, you are unable to find the IP address of the print server... You can manually configure all the settings on your print server... Here is the link to access the PrintServer Setup page: http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&docid=8734f16c5ec1476f9d72e663a6f16c57_4129.xml&pid=80&r...

  IE open on your computer and in the address bar type the IP address of your WPSM54G and hit enter, leave name empty username & password use admin lowercase...

  Once the connection to the print server configuration page, you can match the settings of your router for the WPSM wireless... Once this is done, you can set the static IP address to your WPSM i.e 192.168.1.80... Once done with the parameters of this...

  Now, rerun the Setup program on your computer... and click on "Computer Configuration", this will install all the drivers related to your print server...

  If stil you can not run the Setup program on your computer... Click on the link and follow the instructions how to add the print server on your computer port: http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&docid=1da99b59a04c4bad97b05f96f5ca2769_4126.xml&pid=80&r...

• Just bought a HP 6500 e has and a computer (windows 7) could not connect to the wireless printer

  My new printer is not recognized by the network wireless in my computer (Windows 7). USB print ok

  The printer seems to be connected to the network, but my computer is not connected to the printer. It will not print on request. The print project going on in Quebec but will not communicate with the printer wirelessly. If I plug in the USB it will print.