Connection to a wireless - printing Via Ethernet network?

Similar Questions

• Cannot connect HP 6520 wireless printer to my network.

  Unable to connect wireless HP 6520 network printer, wireless or via USB of Airport Extreme base.  End of 2014 iMac, 24 Gig of RAM, 1 TB of merger, El Capitan 10.11.4 drive; Last generation airport extreme network (ethernet) for a second Airport extreme, which in turn is connected to an Airport Express and also connected to a 2nd Airport Express wireless.

  Have you plugged the printer on the computer directly and made sure it works thus insured that you have the correct drivers for it?

  Try using wireless as it works much better than USB.

  The closest airport to the location of the printer, turn on WPS to printer via the airport utility.

  Do not use the PIN method... HP printers will not pin code work, you must use the first attempt. Then on the printer itself less than 1 min start the WPS connection for the wireless...

  Tell me if it does not work.

• I want to thank my wifi in another part of the House with an Airport Extreme. But I want to not be connected to the modem main via ethernet cable is it possible?

  I want to thank my wifi in another part of the House with an Airport Extreme. But I want to not be connected to the modem main via ethernet cable is it possible?

  I put in place already to extend the wifi of my modem still connected to the modem via ethernet cable.

  Now I want to be considered on the floor and use it to extend the wifi without ethernet cable

  The AirPort Extreme can extend only wireless signal from another router from Apple, so if you want to take the AirPort Extreme on the floor and extend wireless signal, you will need another airport connected to your modem by Ethernet cable router to produce the wireless signal that will extend the extreme on the floor.

  Another way of saying the same thing would be to say that if you want to extend wireless using a router from Apple, you'll need two of them do... because AirPort Extreme is not compatible with a third-party modem or modem/router for this purpose.

• wireless printer won't networked computer photo-quality paper. Due to office, but no cell phone

  original title: wireless printer won't networked computer photo-quality paper. Due to office, but no cell phone

  I have a wireless HP printer. Desktop and lap top are connected to the printer. Desktop will switch printer on photo-quality paper when asked but laptop will not pass. Tried to change prefereces and still does not work. In the contrary case, it prints fine laptop.

  Hello

  Install the latest printer drivers in the notebook, and the check.

  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  Also try the troubleshooting of network running.

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  It will be useful.

• How to connect my PC to my C309 printer via ethernet directly? Radio failed.

  I determined by the troubleshooting report network that the interface (Wifi0) wireless network does not work properly, and the likely cause is that the wireless radio has failed.  I delected original printer and reinstalled as a directly connected printer.  However, I always get a print error when I try to print.  Help!

  Thank you!

  Exactly how is the printer connected - are the printer and PC both connected via ethernet connected to a router, or you connect the printer directly to the ethernet port on the PC?  If you try to make it last you will probably have problems.  In this case a better solution would be to use a USB cable to connect the printer and the computer.

• Photosmart more B209a_m: Virgin Super Hub does not connect with the wireless printer

  We recently upgraged to a new blank media 3 hub, the printer is connected to a Hp Windows Vista desktop via USB, other devices (laptops and tablets) could access the wireless printer when the computer is turned on.

  I also created the same printer to be used wireless by the other devices without the Office of marketing, it was a pain having to keep it logging on when he fell asleep. The printer had a different name if you are using one.

  After that the hub of the Virgin was installed I can is no longer using the printer without the Office being wireless, the new Center can not find the printer connects as is done before that other laptops, I had no problem with my old hub and a separate router.

  I've tried everything as suggested by Virgin (not much there) and reinstalled my drivers for the printer. Any suggestions what I can do?

  Hi @Confused_Nanna,

  Welcome to the HP Forums!

  I read your post about how you cannot connect your HP Photosmart b209 printer to your wireless network. I'm happy to discuss this issue for you!

  Please, try the steps in this guide, printer is offline (Windows) as well as this guide, the printer is not maintaining the wireless connection.

  If you are unable to reach a resolution, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

  I hope that this post helps!

• Connect to a wireless printer lost after installing Microsoft XPS Document Writer

  Microsoft XPS Document Writer was installed on my PC via execution of updates automatically. Now, I have it on my PC and when I need to print any document that I can't find my printer Epson Stylus wireless by default instead I Microsoft XPS Document writer who now appears as my default printer and Microsoft Office Document Image Writer. Cannot find my printer wireless devices & Printers. Frustrating because I can't print any documents. Do I have to reinstall my printer wireless? Please can you help me?

  Hello

  Thanks for posting in the Microsoft community!
  You have reached the right forum for your question.

  1. what happens when you try to print?
  2. you receive an error message?
  3. What is the brand and model of the printer?

  Method 1:
  You can try the steps in the link and check.
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Method 2:
  You can temporarily disable the antivirus on the computer and check if you are able to print.
  NOTE: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks

  Method 3:
  You can uninstall and reinstall the wireless printer and check.
  Check out the link and check.
  Resources for the resolution of the printer in Windows XP problems
  http://support.Microsoft.com/kb/308028

  Just reply with the results. I'd be happy to help you more

• My Windows XP laptop will not connect to my wireless printer or other computers.

  I have a home network, an xp connected to a router, an xp the top with wireless and a wireless printer.  Until recently all worked OK.
  My the top now connect not to do anything, not to the printer, the top or the i'net.  In network connections on the top, the network connections icon has an X on it.
  I tried several methods but still cannot connect to the the top.
  Any suggestions?
  Richard

  original title: Windows XP Home network

  Hello

  1. what exactly happens when you try to Internet or printer via a wireless connection?

  2. you receive an error message?

  3. What is the brand and model of the printer?

  4. don't you make changes to the computer until the problem occurred?

  I suggest you to follow the steps below and check if it helps:

  Method 1:

  Wi - Fi and in Windows network connection issues:
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  How to troubleshoot a network home in Windows XP: http://support.microsoft.com/kb/308007

  Method 2:

  Printer in Windows problems: http://windows.microsoft.com/en-us/windows/help/printer-problems-in-windows

  Hope this information is useful.

• need to connect to a music center via ethernet to my PC cable

  My PC is connected to the wireless internet. Now, I'm trying to connect my music centre to my PC via an ethernet cable.
  I know see there is a new network created, but he limited the accessibiity and cannot install the driver of my music center software (I get the message that the network settings have not changed and I need to restart the installation again and again,...).
  When trying to connect to the new network, I need to put a password (but I have not one) AND at that time, my internet connection is lost.
  Can someone help me how to get this set-up or point me in a direction?
  Thanks so much, I really do not know more what else to do

  Hi to Diouf,

  I will need some additional information to help you best.

  O what is the exact error message you get?

  Is O asking the account password Windows user during the implementation of the internet?

  Follow the instructions below that may help you resolve the issue.

  Method 1:

  Let us try to disable the antivirus/firewall and check if it works. If this works, contact the manufacturer of security program for assistance.

  Reactivate the security program after reviewing the issue.

  Method 2:

  So that the network is working properly, let's check to see if your network services are working properly.

  1. open the Start Menu

  2 type services in the start search box and press enter

  3. click on continue in the UAC prompt

  4. search for network connections, network list Service, knowledge of network and Service of Network Store Interface locations

  5. check that the status is set to started and Startup Type is set to automatic

  6. If this is not the case then right-click the service and select start to start the service

  7. make a right-click the service and select Properties, change the startup type to automatic

  8. repeat if necessary for the services listed in step 4

  Check whether the problem is resolved.

  Method 3:

  If you still have the problem of connection to the network or to the internet follow this steps that fixes most of the problems of connectivity.

  Disable the DHCP Broadcast Flag:

  Link: http://support.microsoft.com/default.aspx/kb/928233

  Check whether the problem is resolved.

  Method 4:

  To reset the stack TCP/IP go to this article and either click on "Fix it for me" or follow the instructions to fix it yourself:

  How to reset the Protocol Internet (TCP/IP)

  http://support.Microsoft.com/kb/299357

  Method 5:

  Try to uninstall IPv6 on all interfaces, the removal of virtual cards of IPv6 and reset the TCP/IP stack. To remove the IPv6, go to the properties for each network adapter, and deselect the check box next to the Protocol "Internet Protocol version 6 (TCP/IPv6), which will turn off, or select it and click on uninstall, which withdraw power off the computer.» Then go into Device Manager and remove any 4to6 adapters, adapters miniport WUN or tunnel adapters.

  Method 6:

  Ensure that the network discovery, file sharing and media are turned on.

  Follow the instructions to check if network discovery is enabled.

  1. click on start and Control Panel.

  2. then network and sharing Center

  3. Discovery Network: WE

  For more information, please see the link below.

  http://social.answers.Microsoft.com/forums/en-us/vistanetworking/thread/0be71d1c-cfe9-4DB5-9531-52cd1ee2fbc0

  Please post back and let us know if it helped to solve your problem.

  Kind regards

  KarthiK TP

• OfficeJet 6500 a: securing wireless printer on home network

  Hello

  I did some research on it and can't seem to find the answer.  Others say that their problem has been resolved, but I don't see how.

  I have an Officejet 6500 connected to the router in my house - I manually entered the IP address.  I suspect that someone in my house (family member) is the impression of the things on my printer because my ink disappears quickly.  It's no big deal, but I thought I'd give the password protect the printer so that they could not connect and print at will.

  I have read other solutions, and people say that remove 'everyone' from the Security tab in windows will work, but that only works if I was connected to the printer via USB and share my connection to a printer through Windows.  Everyone connected to my without wire can install the driver and it will find the HP printer on our network, install and they can print at will.

  Is there a way to put a password on the printer, so access on a home network can be limited to even when I'm not home?  I realize that they could connect manually via USB - I'm just trying to make more of a pain to print when I'm not around.

  I guess I could of pseudo-seggregate my networkt House using a mask of the subnet and the printer on my laptop but my network is a little rusty as I am out of the TI of career and did not want to understand.  I can't find a way to disable the SSID broadcast - which would effectively mask the printing software to find the printer on the network.

  I am disappointed that the designers at HP could not put something so seemingly simple as requiring a password to connect to the printer.

  Any thoughts there?

  Thanks for confirming my suspicions.  If ever I strong enough to play with maybe subnet masks I'll post how it's done, if it works.

  Stupid... everything in this world is cheap and poorly thought.  Can't wait until this printer still works and HP stop cartridges or has no drivers for the next version of Windows coming out that everyone starts to use 3 years after the release, so that they can work out the bugs.

• C6280, win7 cannot print via active network with VPN

  Hi, I have 2 PCs, one Vista, one on Win7. With Vista, I can print over the network.

  Also, via USB on the win7 PC I can print.

  But I can't print via active on the Win7 with VPN network. Without VPN, it works.

  I had several problems with the installation of the SW. Finally it worked (I think I had to turn my VPN connection)

  It recognizes the printer, the State says: ready, but when I print, I get an error after a while.

  When I stop the VPN, I can print.

  I tried to load the patch for Win 7 (recommended on HP circuit (printer disappears), but what it says that I don't have the SW right?)

  any idea?

  Hi ReneH,

  I am pleased to hear that the problem has been resolved. Have a wonderful day.

• Printing problems on a M1120n MFP printer via the network

  Hello

  I bought a printer HP M1120n MFP, a couple of months.  I made sure that there the firmware up-to-date and that you have downloaded the latest drivers from hp.com.

  I can print and scan very well from the PC which is connected to the printer via a USB cable.  However, I can not usually print on the network of the other PC.  On the PC, I can ping the printer and I can also see the printer status page if I enter the IP address in a web browser on the PC.  So, I'm sure that there are no network connectivity problems.

  However, when I print to the printer on the network of these PCs, jobs just to stay in the queue for the printer.  Sometimes they print - but I don't see any model when they print.

  I would appreciate any suggestion on what to do, because I have to return this printer unless I can solve the problem?

  Thank you

  Bogman

  Thanks HP for quality and urged him to respond.  This has really increased my opinion about your company and the excellent support it brings.

• Do not connect not not Wireless printer HP officejet 4620

  My printer was working properly until I tried to set up the e-printing. Now my printer is not connecting on the wireless network at all.

  The wireless doesn't stop flashing light will not allow any connection between the router and the printer.

  Wireless Network Test results

  * Make sure your wireless router is powered

  * Make sure that your printer HP network name (SSID) exactly matches the router (SSID) wireless network name

  * If they do not exactly match, run the Wireless Setup Wizard to set up your HP printer

  I am unable to make one of these troubleshooting steps, because the wireless radio is not remaining on to connect to the network.

  I just need to get the printer connect to the home network so that I can take any futher troubleshooting steps

  Thank you

  Help me please

  Reset the printer to Factory Defaults network.  Now go back and reinstall your printer again.

• I'm unable to connect a Canon wireless printer to my Time Capsule / Airport utility

  Looking for advice on how to connect to a Canon wireless printer to my wireless (Time Capsule).  Airport utility does not see an option to add a WiFi printer.

  If you are referring to the method of adding a printer WPS...

  Open AirPort Utility

  Click on the image of the time Capsule

  Click the Edit button in the window that appears

  Click on the menu of The Base Station ... up where you see the icon Apple, file, window, help and other menus at the top of the computer screen top

  Click Add a WPS printer

  

  There are two methods available... . First of all try (which is identical to a button press the Time Capsule) and PIN, using a code. Choosing the right method according to the instructions provided in the installation Guide for your printer.

• Windows XP - want to connect to a remote printer on another network

  I'm in an office that wants to connect to a remote printer on a separate network to our warehouse on the internet.

  Office network is behind a switch, the warehouse network is on a router, both computers we want to connect using XP.  The printer in the warehouse is currently connected directly to the router, but we can connect to a computer by USB.  The two networks have static IP.  We would like to have the printer of the warehouse are displayed on the office computer printers and fax machines as just an another printer if possible.
  I tried to set up a VPN without success and tried LogMeIn but a client computer cannot print to host apparently (and we want that no interaction with the computer of the warehouse on-site, just be able to connect from the desktop).
  Is there a better solution for this?  Anything is possible with remote desktop?  Or should I continue to try to put in place a VPN?

  Hello BGaskin,

  The Microsoft Answers community focuses on issues and problems related to the consumer environment. Please join the public IT pro TechNet forums below:
  TechNet
   
  Thank you