Connect with RVS4000 WRT110

I have a problem when you try to connect the WRT110 with the RVS4000.

The problem is that devices connected on the gift of the WRT110 obtain an IP address and cannot connect on the computer connected to the RVS400.

My setup is the RVS4000 as a gateway and DHCP active. the wrt110 is the secondary router that will be used to access wireless and wired switch.

devices connected on the wrt110 occurred (Popcorn Hour) media center units

on the wrt110 I tryied different configurations to see if I can make it work. LAN to Lan connection. (with dhcp and NAT Protocol on the disabled wrt110) and

with Lan to Wan connection (affecting an ip address static DNS and gateway wrt110 and dhcp and nat disabled)

I ping the wrt110 from computer connected on the rvs4000 and vice versa, but I cannot ping devices connected on the wrt110

I think 2 scenarios that could affect. The routing table of the wrt110 declares 192.168.1.0 with gateway 192.168.1.5 ips (which is the IP wrt110) can change on 192.168.1.1 which is the rvs4000 with the dhcp server?

All wiring passed it must be somewhere in the connection?

Thanks in advance

You cannot change the ports on the switch N ° the WRT. They are always auto-detection. It seems that negotiation does not work with your media device.

Options:

1. connect the device to support to the RVS4000.
2. find a switch with which the media device negotiate correctly.
3. get a (expensive) managed switch and set the connection port that you need.

Of course, remember the speed control lower the appliance becomes slower. It depends on how fast the device media is supposed to be and what nic ethernet is integrated.

Tags: Linksys Routers

Similar Questions

  • I just bought the last Apple TV - I can't seem to connect with the App Store and Siri is completely useless. This is an example of how Apple is unable to produce a useful product?

    I just bought the last Apple TV - I can't seem to connect with the App Store and Siri is completely useless. This is an example of how Apple is unable to produce a useful product?

    Hello

    Be sure to follow the instructions in this article to support > set up your Apple TV (4th generation) - Apple supported

  • Current device is registered with the former owners of Apple ID, not allow me to connect with my Apple ID?

    Current device is registered with the former owners of Apple ID, not allow me to connect with my Apple ID?

    The former owner must unlock with their password, or give you the password. Otherwise, the phone doesn't help you and no one can help you. Get your money back if you can.

    What to do before you sell or give away your iPhone, iPad or iPod touch - Apple Support

  • Loss of connection with iCloud

    Whenever I login I have to re - connect with my iCloud - suggestions, no matter who?

    I assume you mean iCloud.com website?  How are you internet connection otherwise?

  • Mac book air cannot detect my iPhone 6, after the cable on my I phone 6 to connect with my mac book air, nothing appear on the mac book. Seems like it can't detect the file i phone 6. I want to export my photos and do the upgrade version.

    Hi, after plug the cable on my phone i 6 to connect with my mac book air, nothing appear on the mac book.

    Seems like it can't detect the file i phone 6. I want to export my photos and do the upgrade version.

    Current situation is nothing exportable phone and also cannot do anything mac book because they cannot detect each other. Please advise, thank you.

    You can try to move to a different USB port. And if your just trying to swap photos try Airdrop. Also try to go here If iTunes does not your iPad, iPhone or iPod - Apple SupportHope this help, good luck to you.

  • In a roaming network, Mac always connects with AE which is further away

    So, I had a roaming network for years to host a detached office which was too far from my house.  Worked very well.  Now, my family and I have moved into a temporary rented condo (two floors).  Therefore, there is a lot of wifi networks in the area in conflict with.

    After trying to extend the network (signal too low in the area), I decided to try the roaming network again.  Most of the time, it works very well.  But from time to time, my iMac (on the ground floor) connects with the Airport Extreme, which is on the floor instead of the Airport Express, which is down in the same room as the iMac.  What happens when it connects to the Airport Extreme on the floor, my Tx rate drops to less than 100 Mbps (sometimes dramatically if) and I am unable to listen to the music to my Airport Express without dropouts.

    The dressing was to turn off my wifi on the iMac, and then turn it back on.  It will then connect to the Airport Express.   The problem is that I have to do this in general once a day as my iMac will enter into the "standby" and periodically reconnect with Airport Extreme when I wake up (or if I re-enable it if off).  Ideally, he would stay with the Airport Express.

    So I hope that there is an alternative.  I thought about simply renaming the Airport Express network in the different name of Airport Extreme.  But all the itinerant instructions whereby I know that network names must be the same for all airports in the roaming network.  But perhaps this is not the case.

    Comments are appreciated!

    Unfortunately, you encounter a known issue with the use of a roaming network... and it is not specific to those provided by Apple either. The "solution" you use, although not elegant, is basically everything with that we have (at this time) to go.

    In theory, your iMac fixed, must always connect to the Wi - Fi with the signal network hard... not necessarily the closest to it. It may be possible, since you mentioned that you live in a highly congested environment Wi - Fi, your iMac is struggling to determine the right network to connect to when starting.

    Of course, a more "permanent" solution for your iMac, at least, would connect directly to the nearest base by Ethernet station.

  • Thunderbird does not connect with the server

    Another recent problem is Thunderbird does not connect with the server. I don't know if sent mail will go out, but I know I'm nothing receive. My internet connection works well for FF or another browser. I checked my settings and they seem OK. I checked the default settings in Win10x64 and they are correct. Any ideas?

    Although windows 10 is new for us all. How do solve you. I have other solution with very similar issues.

  • Does not connect with the e-mail server after update.

    Thunderbird ran an auto update yesterday. Then it just stopped working. It does not connect with the Comcast email server. An error message appears "Unable to connect" and "the connection was refused when attempting to contact live.mozilla.messaging.com. I don't want to uninstall and reinstall for fear of losing my emails and address book. How can we get Thunderbird set, there is no tool in the toolbar to enable the debugging and correction of program errors.

    I use Thunderbird version 38.1.0.

    Thank you.

    The problem solved itself, Thunderbird has just started working. I followed the thread suggested by Christ1 and found none of it applied. No malware, no browser, no certificate error security block. I did, however, in Thunderbird, under Tools/Options/General uncheck the button for "When Thunderbird launches, show the Start Page in the message box." I do know that if this helped, Thunderbird still do not access Comcast mail for hours after that, even with several stops and restarts.

    Until the next problem...

  • 1st generation Apple TV cannot connect with the apple ID

    Have 1st Generation apple TV and recently cannot connect with my apple ID.

    The reset several times and nothing.

    Help?

    You have activated 2 no authorization of your Apple ID? If so, disable the connection from a browser and temporarily, then connecting ATV, then reactivate. If not, please describe what is happening when you try to connect. What message do you have?

  • should my time capsule be connected with a cable for backups, after the initial installation?

    should my time capsule be connected with a cable for backups, after the initial installation?

    If you mean that you have to keep your Mac connected to a Time Capsule via Ethernet for future backups, then the answer is no. Time Machine and time Capsule are designed to work over wireless for your Mac would just need to be connected to the wireless network provided by the time Capsule.

  • I had to have an iphone 4, but is unable to operate in Italy. It is supposed to be unlocked by Apple and O2, but when I try to connect with wind or Tim there is no service. What should I do?

    I had to have an iphone 4, but is unable to operate in Italy. It is supposed to be unlocked by Apple and O2, but when I try to connect with wind or Tim there is no service. What should I do?

    Maybe it is locked, Apple do not unlock phones, then call O2.

  • error "too many concurrent connections" with Gmail

    I started all of a sudden the error "too many concurrent connections" with Gmail with one of my gmail accounss. I googled and it seems like an old problem and I tried all the recommended solutions, but none worked. I have two gmail accounts and the other continues to function properly. Suggestions!

    Reduce the number of labels has solved this problem. Seems specific to TB and GMail (google says you can have hundreds of emails - I have about 60). There are mentions of which can be found via google - but no definitive statement on the problem, with workarounds, etc.. Now I will be anxious the next time I have to add a label, not knowing if it will work or cause this problem.

  • What is a substitute for the migration assistant? I tried in vain for three hours to migrate files from a macbook pro to each other so that even if connected with the ethernet cable the computers never see each other.

    What is a substitute for the migration assistant? I tried in vain for three hours to migrate files from a macbook pro to each other so that even if connected with the ethernet cable the computers never see each other.

    You can connect otherwise?  USB or FireWire or love at first sight?  You can connect both machines and start the one you want to transfer to target disk mode.  If your other machine is up and running with an account on it and you just want to move files, you can simply drag and drop the FRO the machine mounted TDM, or you can use the migration wizard.

    Or, if the other machine still starts and runs, you can start both computers and connect to the same wifi network and share the hard drive like machines on the network.  Access them in the finder on the new machine files and drag-and - drop, or use the wizard migration, on wifi.

  • Bluetooth speaker no connection with iPod 5th generation

    Once solve you one problem, another pops up...

    A little more than a week ago, I bought an iHome iBT3, which is a protected against splashing, triangular-shaped speaker. It has bluetooth, which I used about three times now and it was working fine until today.

    The other day I had a problem with my iPod which translates into me trying the three methods; force reset, recovery of the device and reset all default settings. Although I have fixed my previous issue, when I tried to connect my speakers today, connected devices emerged as two things that I had never seen before. I chose the setting for iPod to 'forget' the devices and tried to connect my speakers.

    I watched for 15 minutes. The speaker tried to connect and connect and connect the iPod has tried to find the device, and they never linked between them; my iHome does not appear on my iPod and my iPod never read that there is a device in the region.

    I tried to force the delivery twice, the iPod and it has nothing and if it should happen again, I really, really don't like to restore my iPod because it took me two days and multiple handfuls of hair to do such a thing.

    Can I do to get my two devices to connect with each other?

    Thank you in advance.

    Update: The speaker is not connecting to my or my sister iPods.

    My father has a similar Bluetooth speaker if and which connects both of the devices.

  • Connection with Hulu with ATV 4, is impossible.

    It is impossible to connect with Hulu with ATV 4,!. Can do with the iPad Air2 without problem. Using the same DNS settings on both. I can directly airplay Hulu at ATV4, but not the ATV. Help please!

    DNS settings being that the same are not a guarantee that they are correct, you need to use the settings provided by your ISP, so just to leave them on auto. What exactly happens when you try to watch. You use the settings to the correct location.

Maybe you are looking for

  • Problem Lenovo Ideapad Y570 OKR

    Hey guys... I have a series boring problem I have as I said Ideapad Y570 Core i7 etc... I installed Win7 Manager and I met a wired problem, so I used the Center Manager win7 den 'den all the components of the system. " I did the Lair of all component

  • english__ Spanish language

    I want to change my language of computers from Spanish to English

  • My wireless mouse is difficult to control

    It is difficult to get the mouse pointer to the placement on that I want to click

  • Svchost.exe is the cause of many issues

    file svchost.exe uses continuous Internet using my Internet... Even if I did a clean boot the problem persists... Windows Update service is disabled... Windows defender is... Using ESET smart security... Please help me :(

  • 9.1 ASA 2 drops PING (icmp codes 0 & 8)

    Hello Im trying to ping DMZ on ASA to interface to the host from the INSIDE and vice versa. It does not work :( Trying to debug icmp however the icmp packet did not even touch the DMZ interface for the particular host. Doing so with packet - trace AS