My wireless mouse is difficult to control

Similar Questions

• Wireless mouse seems to randomly start both vertical and horizontal scrolling

  My wireless mouse is out of control.  First, it seems random scroll vertically and horizontally.  When I started my computer I had no mouse at all.  I rebooted and it worked again but began to scroll wildly.  I changed the batteries, but nothing helped.  How should I do?

  Hello

  ·        You did changes to the computer before the show?

  ·        What is the number and the model of mouse you are using?

  ·        What operating system is installed on your computer?

  Put the computer to boot and check which application is causing the problem:

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  If you use Microsoft mouse, then follow the instructions from the link:

  Troubleshoot the incidents of the response to the mouse or wireless keyboard

  http://support.Microsoft.com/kb/838398

  Note:  You can also visit the website of the manufacturer of the mouse and download and install the latest driver for mouse and check if that helps.

• 23 - o014: wireless mouse becomes very irregular on HP ENVY 23 after 5-10 minutes

  Model #: 23-o014
  Product #: F3E94AA #ABA
  Serial No.: [edited serial number
  Software update #: 14AM2ARA603 #SABA #DABA
  Service ID #: 20140624
  PCBRAND #: HP

  My wireless mouse pointer becomes erratic within 10 min. It becomes very difficult and frustrating make the pointer land where I want to 'click '.  It is very well after a fresh reboot or reinstallation of USB receiver that is hard to get to my desire to 23. I moved rcvr on slot USB high speed side rt of the monitor, no help. I looked at 17 min video CV, changed batteries, I think I've tried all the suggestions, but this problem will not go away.   I have to replace some hardware or software?  I had this all-in-one for 5 to 6 months.  Had this prob for about a week. Thank you for your help.

  My 'erratic' 23 Envy wireless mouse is back to normal operation. Sorry, no short answer, but my exasperating prob was solved when I went to hp.com support. I entered a chat session and had the chance to get a very good expert. I gave permission to remote control review and update my pc. He did a lot of upgrade and I could see the windows upgrade mechanism has been broken; He knew what to do & fixed it for several upgrades failed.  Then the HP Support Assistant App was broken, he fixed that too, fairly quickly.  Finally, when all the updates and update mech were ok, it uninstalled and reinstalled the mouse drivers.   My wireless mouse is now very well.

• Zoom scroll Logitech wireless mouse

  I had my M750 for awhile, and until a few weeks before, hold down the command button on the keyboard of my Mac while I scrolled did nothing. Except navigate pages on Firefox. Now for some reason, since updated to update to Firefox 20, or even to the slightest touch of the control button, when I scroll with the scroll wheel to scroll to the top and to the bottom of the page on Firefox 20, it zooms in and out. Very annoying. Anyone know how to disable the zoom on the scroll wheel when you press the command key? Or is it a Firefox issue rather than a problem of software of Logitech? I use the command to automatically open links in a new tab. My finger is at hand. Just easier for me that way. But the slightest touch of the control key enables the scroll wheel zoom feature. And once again, never a problem so far. I actually knew a number of annoying problems since update to Firefox 20, which I had to find workarounds. What is one of the most annoying.

  Found my dose. https://support.Mozilla.org/en-us/questions/821743

  Set the value to 0 for mousewheel.with_meta.action

  Testing, this only disables the command + zoom scroll wheel in Firefox. Scroll still works with the scroll wheel. It IS therefore a matter of Firefox. And when the update to the latest version, sort of to reset my previous configuration settings. I guess I have to put in place some time ago when I first came to the wireless mouse. I hope that Firefox does not change the settings in the future updates. Maybe even do to access patches like that much simpler. As included in the preferences. That is to say. Disable/enable the Zoom with scroll wheel.

• wireless mouse problems

  My wireless mouse stops working in the middle of my work. I bought the last mouse thinking that would work did the same thing. I can move the cursor, but cannot get it right or left click, so I have to reboot. Often now. Any advise?

  Hello

  First you have listed iMac with iOS systems.  They do not go together.   Unless you use El Capitan with your mouse (which should be the mouse Magic mouse 2 by your description), it will not work properly.   Please update to help your mouse works.

  And when you have a moment, please, update your profile to show you have the devices and operating systems that you use for each.   We love to help, but if your information is inaccurate, life becomes very difficult.

  Thank you.

• Pro L10: After using a wireless mouse, the touch pad has stopped working

  Pro L10. After using a wireless mouse, the built in touch pad has stopped working properly. At the start of the keypad icon touch shows and the touchpad works intermittently, after a few minuets, the icon disappears and the touch pad stops working. In the control panel / mouse & or device drive I can how the program works, then disappears.

  I deleted the software and reinstalled nothing doesn't. In some cases, I get a message that a pointer is on.

  Can you help me?

  Hello

  It seems that the wireless mouse or mouse wireless drivers/software has a bad influence on the touchpad.
  I put t have a good solution for this problem. Well, you can consult the page of the Toshiba driver for latest driver updates. If the updates doesn't solve this problem I suggest to use either the mouse wireless and disable the touchpad with FN + F9 key combination or use a regular USB mouse.
  I guess that you are having regular problems with a USB mouse.

• Satellite Pro M70: disable the touchpad when you use a USB wireless mouse

  I want to disable the touchpad when you use a USB wireless mouse. Can someone tell me how to do what you please?

  Hello

  Open the control panel-> mouse. There should be an option to disable the touchpad.

  Good bye

• X 3000 wireless mouse: scroll doesn't work is not on the X 3000 wireless mouse

  Hello. My HP Wireless Mouse X 3000 is difficult to scroll down. I have to turn this small wheel very quickly, until I get at least scroll. It is connected by using the provided USB wireless receiver box. I tried on two PC with USB 2.0 and 3.0. The same problem. What can I do?

  Hi there @anduble,
  
  Welcome to the Forums of HP Support! It's a good place to find the help you need, other users, the HP experts and other members of the support staff. I understand that you are having problems with your mouse's scroll wheel function in Windows 10.

  Try using the HP Support Assistant, if you have not already, to search for updated drivers if available.
  HP computers - using HP Support Assistant (Windows 10, 8, 7)
  HP PC - troubleshooting HP Support Assistant (Windows, 10, 8)

  So if you are still having the same problem, try this page: HP PC - keyboard and wireless mouse troubleshooting.

  Don't forget to check your mouse settings in Windows 10.  Select (left-click) start button, and then select settings > then peripheral.  Then select the mouse & touchpad in the list on the left side. You can make adjustments to the scroll wheel function in the options avauilable and link options mouse with dubbing .

  Please let me know how it works for you and if it does not solve your problem, please mark this message as a solution. Bravo would be appreciated as well.

• hp bluetooth wireless mouse x4000b

  Bought this hp bluetooth wireless mouse x4000b at Best Buy in Fort Myers, Fl four months ago and has continued to use us with my laptop last week and there refuse to work.  Made sure it was lit.  The unit has been accepted by my laptop when I first bought and worked 100% until last week.  Just to double check, I replaced the battery but still dead.  Went into the control panel and was able to bring the wireless device.  Number of product HP H3T51AA hope you have any suggestions as to what we can do to make relive.

  I have dicided to uninstall the mouse wireless bluetooth hp.  Following the instructions that I installed it again without any problems.  This method enabled the mouse to pair with the laptop.   Windows 8.1 Hp 17.3 laptop.

• Problems with wireless mouse when laptop computer HDMI is connected to a TV

  I have a HP Pavilion G series laptop PC, when I connect to the TV using the VGA interface I have no problem, when I connect to the TV via the HDMI so I have the problem. I use a Microsoft 2.4 ghz wireless mouse, laptop connected to an electrical outlet, new batteries in the mouse, if I move the mouse more than 1 foot of the tower top it becomes useless, erratic, moves 6 inches at a time, or not at all, totally out of control. The laptop is about 2 feet from the TV due to the length of the HDMI cable, and I am sitting about 12 feet out in front of the TV with the mouse. As I know, no problem if I find the mouse in 1 foot from the laptop and no problems even at 12 feet awy using the VGA interface. Production of mouse says that the mouse has a range of more than 20 feet. Someone has an idea of what might happen? Last note, I also lookes to the use of the processor at the time and it is only 8%. The mouse model number is 3500.

  Hello said,

  Thanks for the reply.  I'm glad that you were able to solve the problem by replacing the mouse.

  Good luck!

• Wireless mouse stops screensaver to run on Windows XP Professional

  I have a Dell Optiplex 745 with Windows XP Professional SP3 and Pentium D 820, 3 GB DDR2.  When I have a wired mouse to the system, the screen saver works very well.  However, when I use a wireless Microsoft Mouse (instead of the wired mouse) the screen saver does not (the work of the SS preview).  It fails to load up after the required period of time - that this either 1, 3, 5, 10, 15 minutes - no matter how long I put it for)

  How can I get the screensaver to work when the wireless mouse is connected?  (The same weight of wireless mouse works fine on Windows 7 and Windows Vista).

  I found the problem.  I just need to update the driver.  I have although it updated automatically, but I went to control panel - system - hardware - devices - human interface devices Manager - clicked on each of the three eevices who presented themselves separately - then clicked pilot then put to update driver.  I don't know who has been to the mouse but two could not be updated, and you could.  I guess it was that of the mouse, because it works now.

• How do I change the batteries in the wireless mouse

  I can't find Vault battery to change the batteries in the wireless mouse, please show me where.

  Hi mydavid0615,

  Without knowing the manufacturer, the brand and model of the mouse, it is difficult to say.  They are all different.

  But that being said, I've seen most have a button or a push bottom bar who, when you move it going to go get the cover of the box that contains the batteries (I found is normally on the top at the back of the mouse, but you can not and should not attempt to open until you release as indicated).

  If this does not help, then please provide us with the information above on the mouse and we will try to help you the information on its website.

  Good luck!

• Will be a work of Microsoft Bluetrack Wireless Mouse 5000 with a Microsoft 3000, 4000, 5000, 6000 USB mouse receiver V2.0?

  I have a Microsoft Wireless Mouse 5000 to set keyboard/mouse Bluetrack. I need a new transmitter/receiver for the mouse as the keyboard is connected to another computer and using the transmitter/receiver provided with the set. My mouse works with a different transmitter/receiver?

  Hello

  1. you have the Microsoft transceiver?

  Try the steps below to connect to Microsoft Transreciver.

  (a) press and hold the Bluetooth button on the bottom of the mouse. If your device is equipped with a battery indicator light, it flashes red/green to indicate that the device is discoverable.

  (b) on your computer, open the Bluetooth software. The Bluetooth software is usually found Control Panel in the start menu. For more information, see open the Bluetooth software below.

  (c) in the devices tab, click Add

  (d) follow the instructions that appear on the screen.

  (e) If you are prompted for a passkey, select no password. The Microsoft Bluetooth mouse devices do not work with a random passkey.

  You can see the following article for more information:

  Connect a Bluetooth device that are neither require a TRANSCEIVER

  http://support.Microsoft.com/kb/952818

  If you use a third-party receiver, you can consult the following link and check.

  http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/76eea589-C264-4e7d-81A9-9b918ef9ffe6

• Code 43 suddenly my computer does not recognize my wireless mouse

  My computer Dell Inspiron 1525 will recognize is no longer my wireless mouse, which is a mouse dell comes with the computer itself and has been fine for over 2 years. I'd appreciate any help on this, I tried checking the method of solutions, but there is absolutely nothing. Thank you

  Hello

  Windows has stopped this device because it has reported problems. (Code 43)

  One of the motors controlling the unit notified the operating system that the device has failed in some way. For more information on how to diagnose the problem, see the hardware documentation.

  On the tab General properties of the device, click Troubleshoot to start the Troubleshooting Wizard.

  ===============================================================

  Have you tried the mouse on other computers? Have tried your other mouse on this machine?
  Panel of configuration-device - mouse and other pointing devices Manager - enter on the mouse - tab - pilot
  Uninstall - when is the Manager of devices - Reboot.

  Use these until you get the mouse to work.

  Control the mouse with the keyboard (mouse keys) http://www.microsoft.com/enable/training/windowsvista/mousekeys.aspx

  Keyboard shortcuts
  http://Windows.Microsoft.com/en-us/Windows-Vista/keyboard-shortcuts

  -----------------------------------------------------------

  If necessary check with Dell Support, their online documentation and drivers, and their forums.

  Dell support
  http://support.Dell.com/

  Dell support drivers - product manual & warranty Info (left side) - and much more
  http://support.Dell.com/support/index.aspx?c=us&l=en&s=DHS

  Dell forums
  http://en.community.Dell.com/forums/

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Wireless mouse does not work after update Vista graphics driver

  Hey whats goin' I'm looking for a little help here Irecently downloaded a new graphics driver on my laptop and rebooted... suddenly all OOF, mouse not working anymore... What do I do?

  * original title - my wireless mouse died after I downloaded a driver what should I do? *

  Hello

  The video driver may be accessory to the mouse does not.

  Reboot again. If the mouse still does not work, check the batteries in the mouse and receiver
  connection. To the need to update or reinstall the mouse drivers - check with Microsoft Hardware, LogiTech
  or anything done to the mouse for the latest drivers.

  ==================================================================

  If this seems to be a USB problem AFTER the foregoing:

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------

  Then lets refresh the USB stack

  Control Panel - right CLICK on EVERYTHING - Serial USB controllers - Device Manager and UNINSTALL
  all except the category itself - REBOOT - it refreshes the drive and battery USB

  This KB shows XP how to and the method of Vista is identical
  http://support.Microsoft.com/kb/310575

  ----------------------------------------------

  If necessary try these two:

  Tips for solving problems of USB devices - and a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGB

  Hardware devices not detected or not working - Mr. Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.