Connection 2 screens & Ethernet 2 Ports of 15 "rMBP Thunderbolt

Similar Questions

• Cannot get signal when you connect the TV to HDMI port.

  * Original title: HDMI Signal

  Hello. My nam is Kieu. I have a problem and and we hope you guys can helo me. I just bought a Gateway desktop all-in-one computer and tried to connect it to the TV via the HDMI port, but I could not get signal on my TV. Help, please.
  Thank you very much

  Hi David,

  Thanks for posting your query in Microsoft Community Forum!

  According to the description of the problem, it seems that you are unable to get the signal when you connect the TV to HDMI port.

  I will certainly help you with this issue.

  Here are some steps that you can try in order to solve the problem.

  Step 1. First you need a video cable to make the physical connection. For a better image quality, you need to connect the computer to the TV using standard VGA ports or via DVI to HDMI Cable provided your TV supports these ports.

  Step 2. Open thedisplay settings' ' in your Vista computer and Activate the output to the TV screen. You can reflect the content of your computer on the TV or extend the display as a double screen control.

  Step 3 Pick up your TV remote and switch to "External inputs" in the menu. You need to change the value by default "Video 1" to a different selection which may be "HDMI 1" or "video 2" depending on how you made the connection. "

  Important: Make sure you connect the cable to the TV before turning on the computer, because sometimes it may not recognize the external display.

  You may also change the resolution of your TV screen using the display settings in your panel of control remains the image may appear distorted.

  For more information, see the article.

  Connect your computer to a TV

  http://Windows.Microsoft.com/en-us/Windows-Vista/connect-your-computer-to-a-TV

  If anything in my post is not clear or if you have any questions on Windows, feel free to let us know. It is our pleasure to be of service.

• want to connect Apple TV but HDMI port is already in use.  Y at - it a triangle connector I can buy or?

  want to connect Apple TV but HDMI port is already in use.  Y at - it a triangle connector I can buy or?

  Sorry but no.

  Apple TV requires an HDMI cable and a HDMI port.

• What is a substitute for the migration assistant? I tried in vain for three hours to migrate files from a macbook pro to each other so that even if connected with the ethernet cable the computers never see each other.

  What is a substitute for the migration assistant? I tried in vain for three hours to migrate files from a macbook pro to each other so that even if connected with the ethernet cable the computers never see each other.

  You can connect otherwise?  USB or FireWire or love at first sight?  You can connect both machines and start the one you want to transfer to target disk mode.  If your other machine is up and running with an account on it and you just want to move files, you can simply drag and drop the FRO the machine mounted TDM, or you can use the migration wizard.

  Or, if the other machine still starts and runs, you can start both computers and connect to the same wifi network and share the hard drive like machines on the network.  Access them in the finder on the new machine files and drag-and - drop, or use the wizard migration, on wifi.

• Help my internet connect wireless or ethernet cable

  I have a big problem with the internet wireless connection or the ethernet connection. In both cases it seems to be good connection (100%) for the network but the computor is unable to connect to the internet.

  I tried all the obvious options to solve the problem restart; Unplug the unit; antivirus Internet transformed the ip address is the same as necessary. Is it possible I could have disabled the option to connect to the internet? Before the problem arose, I could connect to the internet in the public and private sectors with no problems.

  No change to the settings recently outside the tent to connect to a network different and who need to change the configuration to do this.

  Any ideas appreciated!

  If you are sure that the internet service through, try to work on your web browser.

  Reset your ie and check from there. here

  Also, if you have another computer, try to download another browser (firefox, google chrome) on a flash drive and run it on the computer laptop problem. See if you get the same result it. After return to account to you.

• Is equivalent to a DSL ethernet connection or better ethernet internet connection called DSL connection?

  Is equivalent to a DSL ethernet connection or better ethernet internet connection called DSL connection?

  On Saturday, 22 September 2012 17:04:18 + 0000, stuckfree wrote:

  Hi Ken once again,

  I'm sorry, I'm always clear that this question can reanswer again? Is not wired and not the RJ-45 connection.

  What type of internet connection they call when you connect to the internet using a * connection cable *?

  I'll try again and hope that you understand this time.
  You connect to the internet via a modem, * not * a cable of any kind.
  The modem connects to the internet in several ways; both
  the most common ways are by using an RJ-11 cable (it is a standard phone
  cable and is used for dial-up or DSL) or a cable TELEVISION cable
  (it's just like the one you use to connect your TV if
  "you have cable). This internet connection as the modem
  connects to is usually a wall outlet.

  You must connect to your modem. If you are the only computer on
  your site to connect to the internet, you can connect directly to the
  modem.
  If you have two or more computers that connect to the internet, they
  normally connect to a router and the modem is connected on the
  router (but with some routers, the modem is built in it, so a
  separate modem should not be connected). Normally, you connect to
  the modem/router using an ethernet (RJ-45) cable.

  Here is therefore a raw image of a default installation (the dotted lines are
  cables):

  Computer 1-------.
  \
  \---
  Router - Modem - Internet (DSL, dial-up, cable TV)
  Computer 2-
  Note that the lines (cables) on both computers to the router are
  RJ-45, but they are generally * not * the internet connection and they
  are not, which makes the internet more quickly or more slowly. The internet
  connection is the last dotted on the right line. From
  the Modem to DSL, dial-up, or TELEVISION outlet cable (usually a wall)
  socket) is the internet connection, and is the type of cable, it is
  any form of internet service you have (and what outlet
  "you have to the internet connection).

  Ken Blake, Microsoft MVP

• I can connect to my wireless router, but cannot get internet connectivity via Wireless. If I connect the cable to the port on the router, I get internet connectivity.

  Wireless router / Internet problems

  I am running Windows Vista Home Edition with Security Essentials.  I can connect to my wireless router, but cannot get internet connectivity via Wireless.  If I connect the cable to the port on the router, I get internet connectivity.  Is there a firewall setting that could cause this problem?

  Hello

  Your router could be suspicious here, you have successfully updated its firmware as a possible solution? And I would like to
  Update your WiFi drivers on computers. How you are positioned in the router? Are there
  obstacles in the path?

  Actually try updating your driver and disabling the network logon.

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
  version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
  Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
  manufacturer of system become your backup policies).

  Repeat for network (NIC) card and is a good time to get the other updated drivers as Vista like
  updated drivers.

  I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
  are almost always old, and you can search drivers manually as needed.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ------------------------------------------------------

  Make sure you know the details of connection to your wireless router - SSID and password.

  You lose connection when you do and have to redo your logon.

  Control Panel - Network & Sharing Center - right, click Customize - page set of network locations.
  lower left click on merge or delete network locations - REMOVE all instances of your network (and the
  others you don't use anymore) - REBOOT. Start - Connect To log on to the network.

  -----------------------------------------------------

  Check this box:

  Strange problem with Internet under Vista
  http://www.catonett.com/blog/archives/194

  Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers
  http://support.Microsoft.com/kb/928233/en-us

  ----------------------------------------------------

  And:

  Network connection problems
  http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• CM1415fnw ctrl panel will not allowing printing wireless (wifi) when you are connected to wired ethernet

  Panel Display control for CM1415fnw says that it will not allow for wireless (WiFi) network card while connected to the wired Ethernet cable.  Was able to get the printer to activate the network WiFi once the Ethernet cable has been disconnected. and there he has disabled the connection once again Ethernet has been reconnected.

  How this printer can be configured to allow both wireless and wired print 802.11?

  Thank you.

  Hi CM1415fnw_help,

  You can't the connected printer Ethernet & Wireless at the same time. The only option is to connect the printer USB & Ethernet or USB & wireless. It is not possible to have two networks connected at the same time. Let me know if you need help.

• My Windows 7 32 bit are more recognized the camera. I ' ve re - run the installation disk but it still don't collect the camera when I connect it to the ISB port.

  My Windows 7 32 bit are more recognized the camera. I ' ve re - run the installation disk but it still don't collect the camera when I connect it to the ISB port.

  You can check with the manufacturer of the camera, whoever it is.

  You can also remove the memory card and put it in a card reader that plugs into a USB port.  If you do not, you can buy them for about $3 in computer stores.

  Good luck.

• What configuration of VLAN requires a switch connectivity defined as an access port?

  What configuration of VLAN requires a switch connectivity defined as an access port?

  By external switch tagging

• Pavilion dv7 Notebook - how will I know if I'm connected with the Ethernet cable or wireless?

  The notification area icon displays only a wireless connection, although the ethernet cable is connected to the laptop.  HP Connection Manager shows that both wired and wireless connections are active.  All of my previous laptop (not HP) had different icons for wireless to a wired connection in the notification area.  HP has a different icon for a wired connection?  If so, why it doesn't show in the notification area?

  obxperson99 wrote:

  Enrico, thank you.  I have installed Win7 Pro.

  The Network and Sharing Center says I'm connected wireless.

  Program of HP's "Connection Manager" shows that both the wired (ethernet) and wireless networks are connected.

  If I am always connected wirelessly with the ethernet cable plugged into my machine, how to move from the wired connection?

  Open the network and sharing Center. Look at the picture of what I have posted. Do you see where it says log in or out? Select it, and then disconnect from the wireless network. If you are also connected to the wired connecttion, then the connection should be almost transparent.

• Could not connect to smtp host: &lt; ip &gt;, port: 25, response: 421

  Hello
  
  I'm under java program sends single e-mail thread on. He sends about 250 emails per minute.
  Emails sent with success, but after a few hours I still get email exception "could not connect to smtp host: < ip >, port: 25, response: 421.
  
  Once this happens he has stopped coming. I had to restart the application server for this one.
  
  I wonder why emails are sent in even if e-mail exception occurs?
  
  any help will be appreciated.
  
  Thank you

  I'm not close connection to the finally block.

  So close a finally block.

  I have an old version of mail.jar (1.3.1)

  Therefore use the current version.

• JMX connection to the jrockit.managementserver.port

  Hi all
  the following parameters are configured in my environment:
  
  JRockit.ManagementServer.port = 6105
  JRockit.ManagementServer.rmpport = 6105
  JRockit.ManagementServer.usejmx = false
  
  Can I use a JMX connection to the jrockit.managementserver.port?
  The envjironment has a weblogic 7.0 and jrockit 1.42.
  
  Thanks in advance.

  JRockit JDK 1.4.2 only uses the RMP Protocol, so JMX cannot be used.
  (RMP's JRockit specific Protocol, IE not standard Java, has been used before the standard JMX came)

  Klara

• The TCP/IP connection to the host localhost, port 1433 failed.

  Hi, im using sql Server2000,
  I said this in my program:

  Class.forName("com.microsoft.sqlserver.jdbc.SQLServerDriver");
  String url = "jdbc:sqlserver://localhost:1433;databaseName=Factura";
  Connection conn = DriverManager.getConnection(url,"sa","");

  and gives me this exception:
  

  run:
  Got an exception! 
  The TCP/IP connection to the host localhost, port 1433 has failed. 
  Error: "connect timed out. 
  Verify the connection properties, 
  check that an instance of SQL Server is running on the host and accepting TCP/IP connections at the port, 
  and that no firewall is blocking TCP connections to the port.".
  com.microsoft.sqlserver.jdbc.SQLServerException: The TCP/IP connection to the host localhost, port 1433 has failed. 
  Error: "connect timed out. Verify the connection properties, 
  check that an instance of SQL Server is running on the host and accepting TCP/IP connections at the port, 
  and that no firewall is blocking TCP connections to the port.".
          at com.microsoft.sqlserver.jdbc.SQLServerException.makeFromDriverError(SQLServerException.java:171)
          at com.microsoft.sqlserver.jdbc.SQLServerConnection.connectHelper(SQLServerConnection.java:1033)
          at com.microsoft.sqlserver.jdbc.SQLServerConnection.login(SQLServerConnection.java:817)
          at com.microsoft.sqlserver.jdbc.SQLServerConnection.connect(SQLServerConnection.java:700)
          at com.microsoft.sqlserver.jdbc.SQLServerDriver.connect(SQLServerDriver.java:842)
          at java.sql.DriverManager.getConnection(DriverManager.java:582)
          at java.sql.DriverManager.getConnection(DriverManager.java:185)
          at factura.FacturaView.conexion(FacturaView.java:317)
          at factura.FacturaView.jTextField1KeyPressed(FacturaView.java:268)
          at factura.FacturaView.access$900(FacturaView.java:41)
          at factura.FacturaView$5.keyPressed(FacturaView.java:150)
          at java.awt.Component.processKeyEvent(Component.java:6225)
          at javax.swing.JComponent.processKeyEvent(JComponent.java:2801)
          at java.awt.Component.processEvent(Component.java:6044)
          at java.awt.Container.processEvent(Container.java:2041)
          at java.awt.Component.dispatchEventImpl(Component.java:4630)
          at java.awt.Container.dispatchEventImpl(Container.java:2099)
          at java.awt.Component.dispatchEvent(Component.java:4460)
          at java.awt.KeyboardFocusManager.redispatchEvent(KeyboardFocusManager.java:1850)
          at java.awt.DefaultKeyboardFocusManager.dispatchKeyEvent(DefaultKeyboardFocusManager.java:712)
          at java.awt.DefaultKeyboardFocusManager.preDispatchKeyEvent(DefaultKeyboardFocusManager.java:990)
          at java.awt.DefaultKeyboardFocusManager.typeAheadAssertions(DefaultKeyboardFocusManager.java:855)
          at java.awt.DefaultKeyboardFocusManager.dispatchEvent(DefaultKeyboardFocusManager.java:676)
          at java.awt.Component.dispatchEventImpl(Component.java:4502)
          at java.awt.Container.dispatchEventImpl(Container.java:2099)
          at java.awt.Window.dispatchEventImpl(Window.java:2478)
          at java.awt.Component.dispatchEvent(Component.java:4460)
          at java.awt.EventQueue.dispatchEvent(EventQueue.java:599)
          at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:269)
          at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)
          at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:174)
          at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:169)
          at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:161)
          at java.awt.EventDispatchThread.run(EventDispatchThread.java:122)
  BUILD SUCCESSFUL (total time: 34 seconds)

  How can I solve this?
  
  Thank you...
  
  Edited by: derok December 8, 2010 13:31
  
  Edited by: derok December 8, 2010 21:14
  
  Edited by: derok December 11, 2010 13:51
  
  Edited by: derok December 11, 2010 13:52

  There's a sqlservr.exe is listening on port 1025:
  What is the process (sqlservr.exe) that I need to connect to?

  Obviously. Have you tried?

• How to force the screen sharing to use Ethernet 2 port?

  Hello

  I have 3 MacPros connected in my studio. MP1 is the master and I use screen apart to see MP2 and MP3. Now, I bought a very quick switch to connect these 3 between them via the Ethernet Port 2 MP1 and at the same time have the MP1 connected to the internet and printers, servers and so on with 1 Port Ethernet. But this is not possible, because the screen sharing will prefer to use the port where the internet/router is connected.

  When ONLY Ethernet Port 2 is active, screen sharing using this port and it works perfectly, but when turn on again once, 1 Port Ethernet 2 remote Mac loses connection.

  Is there a way to force the screen sharing to use Port Ethernet 2?

  It would be useful:

  NC-port-number-on-Mac-OS-x http://superuser.com/questions/148095/How-to-change-the-default-Screen-Sharing-v