Connection EA4500 to replace the faulty router

Similar Questions

• When I connect my computer to the Netgear router, they do not seem to recognize the signal from the modem. I have to run each device directly to the modem (one at a time) for internet access.

  I have both a laptop and a desktop computer and use a modem wired high-speed internet.  I bought a router "Netgear" 5 port so that I could have both online at the same time, but when I connect my computer to the router, they do not seem to recognize the signal from the modem. I have to run each device directly to the modem (one at a time) for internet access. It gets very tedious, please help...

  Original title: router does not work...

  Hello

  Welcome to the Microsoft community.

  I see that when you connect multiple computers using the Netgear router, it does not recognize the signal from the modem.

  You must contact the ISP to verify if they can help you with this question.

  In addition you can keep these items handy, it might help you.

  Set up a wireless router

  http://Windows.Microsoft.com/en-in/Windows7/set-up-a-wireless-router

  Install or remove a modem

  http://Windows.Microsoft.com/en-in/Windows7/install-or-remove-a-modem

  Change modem settings

  http://Windows.Microsoft.com/en-in/Windows7/change-modem-settings

  It will be useful.

  If you need help with Windows, let know us and we will be happy to help you.

• Connect Windows Vista to the wireless router

  installed the wireless router. How to connect my computer laptop tosiba windows vista to use without being plugged >

  Click Start, connect to, select your wireless router, click on the 'Connect' button below.

  I hope I could help

• Replaced the faulty hard drive

  Hello

  I replaced the defective hard drive on my Presario CQ61 - upgrade to a 500G SATA drive.  Booted up the system repair disc, I created when I bought the computer.  I ask myself a lot of questions about the folder in which to select.  I assumed it would happen automatically.

  Can anyone help please?

  Thank you

  MOFMan

  Hello

  Assuming that you are referring to Windows 7, there is a good guide on the link below for the present - to ensure that if the Disk Image is saved on an external HARD drive, that it is connected before starting.

  http://www.howtogeek.com/HOWTO/7702/restoring-Windows-7-from-an-image-backup/

  Kind regards

  DP - K

• want to replace the faulty wireless card in dv6

  Hello

  I want to replace the card wireless in my HP Pavilion dv6 Notebook (product LK384PA #ABG number).

  I read somewhere (in a lot of places actually) that the BIOS will almost certainly turn off the map (may even refuse to system startup).

  My current faulty card is Intel Centrino Wireless - N 1000 (model 112BNHMW).

  Issues related to the:

  If I buy the same model of card off ebay - the bios will allow it? Or the card should be "tattooed HP?

  If I can't find a map tattooed HP on ebay - I'll be able to use a USB wireless card?

  TIA

  Hello:

  Here is the link to the service manual for your laptop.

  Cards supported with the corresponding reference numbers are in Chapter 3 begins on page 19.

  What you said is correct. You only NEED to install one of the maps in the maintenance manual and it MUST have this part number HP on it or it won't work at all.

  Laptop you don't POST until the unsupported card is removed.

  Make your request eBay only by the number of the desired part. Do not interview the model of the card.

  You can also get most of the HP maps (of course that you will probably pay more) on the site below.

  Enter the part number you want to buy. If this is not available, you can call HP and give them your model number and the wireless card you want and see if you can get it that way.

  http://h20141.www2.HP.com/hpparts/default.aspx?mscssid=A3443EA1154544F59545214567C9763E

  Or you can use the PartsSurfer from HP:

  http://PartSurfer.HP.com/search.aspx

  Yes, you can use a wireless USB adapter, but I recommend that go into your BIOS and disable the onboard or remove physically, if you never want to use again.

  Paul

• used computer connected to the TV using the hdmi connection. I replaced the hdmi cable and now all I get is sound and blue screen

  My computer runs on xp sp3. I have two hdmi connections on my TV, but it makes no difference if I change the connections

  Hi georgethompson47,

  I suggest you to update video drivers and check if it helps to solve the problem.

  Reference: http://support.microsoft.com/kb/283658

• Replace the faulty processor on a Pavilion Ultimate d4995t

  Need to know if this quad-core processor on the link below to qualify as a replacement for the defective processor in my HP Pavilion Ultimate d4995t CTO desktop PC: http://www.tigerdirect.com/applications/searchtools/item-Details.asp?EdpNo=2983971

  Thank you very much.  I appreciate the timely response.

  Paul

• Connection of comments on the second WNR1000v3 as access point does not connect to Internet

  I have a WNR1000v3 (firmware V1.0.2.68_60.0.93NA) connected to the WAN and it works well. His IP address is 192.168.0.1, subnet 255.255.255.0, gateway 192.168.0.1, mask and DNS servers are on 8.8.8.8/8.8.4.4. DHCP is configured to 192.168.0.10 to 192.168.0.100. I have a guest connection configured and it works well.

  I have a * second * WNR1000v3 (same firmware) bound to the first as access by using these instructions: http://kb.netgear.com/app/answers/detail/a_id/23784/~/how-to-automatically-configure-a-netgear-route...

  I gave him the IP 192.168.0.2, subnet mask 255.255.255.0, gateway 192.168.0.1, and DNS servers again the value of Google. It has the same SSID wireless as the main router and I can move seamlessly between the two. The devices connected to the LAN ports on this access point work very well. Wireless connection works fine.

  I then configured the connection even guest on the second router (the one running in access point mode) and I can get an IP address when I use it. However I can't access the Internet. Ping 192.168.0.1, 192.168.0.2, and 173.194.33.137 (the IP local google.com) all fail.

  Guest connection is not supported on a router functioning as an access point? Or am I missing something really obvious?

  Thank you

  Bill

  @storm1985 I suspect that your configuration means that all the second router LAN ports will also forward only to the Internet. But this gives me a good idea to use another router just like an access point wireless for the connection of comments. (I seem to accumulate old routers.) Unfortunately, I don't have the time to try this out until late in the week, but I'll certainly do and report. Thank you!

• Cannot stay connected to the network, even after replacing my old router.

  I have a laptop Toshiba Satellite L655 is one year old and its operating system is Windows 7 home Premium I have Comcast internet service and use a NetGear wireless router.

  Recently, about 2 months ago I got this router in Comcast, in replacement of my old 1. Why I asked that a new router was the former 1 had problems to stay connected to the internet. The problem persisted even with the new router so I look at it is not not a problem with Comcast or the router. I tried resetting the connection, the son, restart the router, diagnostics running on my laptop and are not yet able to resolve the problem. I run disc optimization, defragment the hard drive, run many virus / spyware scans and tried to disable startup programs as much as possible. This problem has frustrated me for months and I want to get it resolved. It sucks paying all that money for equipment and service and there not work directly without having to spend more money, which I have unfortunately not yet. Any help is very appreciated.

  Hello

  You can check this link:
  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

• Printer not responding not connections (wireless printer) is good and solid. I replaced my old router wirelessly with a router of valuation. I had to plug it, but the printer does not respond now.

  Printer not responding not connections (wireless printer) is good and solid. I replaced my old router wirelessly with a router of valuation.  I had to plug it, but the printer does not respond now.

  Is what brand and model of printer?

  I do not work unless your new router has the same SSID and password wireless as the old. Consult your printer documentation to find out how to handle the situation. For example, some Lexmark wireless printers have a program called Configuration Utility Wireless in the Lexmark folder under all programs on the start menu that is used to set up the printer when changes are made to the wireless network.

• Router EA4500 I can't connect into account outside the home

  I Born just this topic http://community.linksys.com/t5/Wireless-Routers/I-can-t-login-into-smart-wifi-router-outside-home/t...

  and check my email for registration - when I click on the page open link says I'm already registered.

  No idea how to solve this problem?

  Ensure that the ISP's modem has not built into the router. This can interfere with remote access to your router main host.

  Can try to disable your account Smart WIFi or see if you can remove the acocunt router then re - add again.

• HP Officejet 6500 Wireless: Connecting older printer to the computer and the new router

  I've updated my router and got a new computer and cannot find a way to connect them to my old printer. I followed all the steps I learned other questions and instructions, but nothing helped.

  After having replaced the router reconnect the printer to the new wireless network?

  1. Press the Setup () button on the printer control panel.

• Equium L10-200 - unable to connect to the WLan router

  I have a 200 L10
  When I tried to connect WiFi my suburb does not connect with the router at all. Looks like it was trying to access the Internet.
  Then window took to replace my IP address. But as I can not connect on it cannot be a substitute.

  How can I get them back.
  Cable and work for laptop computer to my wife on the same router work ok.

  I am running XP and connect to the sky

  Hey mate,

  Why you can t replace your IP address?
  First to connect properly, check if you need a static IP address or if you get an IP address from your router (DHCP).

  If you use encryption, make sure you typed the correct password. Disable filtering of MAC addresses in the router to connect properly.

  Last but not least, make sure that you have installed the new firmware on your router.

• Problem connecting to the new router

  When we all first our WVC54GC Setup was quick and easy, and we used it without event for 1-2 years. Now, we have replaced our old router with a WRT610N. Everything else, wired and wireless, connected to the new network without event after I have updated their SSID settings and security. (A new uses WPA - WP2, the an old WEP) but for this camera I can not to do. I read the articles on this page and plugged all the correct settings, but it still won't talk of it in wireless mode. (With a cable that is no problem). What I'm missing here?

  You must be identical on both devices wireless settings to establish communication between your router and the camera... Ensure that your camera settings Wireless 2.4 GHz of your router... Try Basic WEP security and see if that works, if WEP works you can change security to WPA... Once you have set matching the wireless settings, unplug the cable ethernet and power cycle the two devices and see if you can see your wireless camera...

• Replace/upgrade my router after purchase/adding a 'Smart' to my network TV and now have a noise to connect/disconnect running in background.

  Original title: connect/disconnect sounds in the background

  I had to replace/upgrade to update my wifi router after purchase/adding a 'Smart' to my network TV and now have a noise to connect/disconnect running in the background, on something, every few minutes.  It does not affect the operation of my computer, but it is very annoying. Cut the old router market and connect and disconnect before replacement, but did not any noise so I don't think it is related to that.  I can't find any evidence of the old router on the computer anyway.  I hope you can help me!

  Hi Danielle65,

  You can try the following steps and check if it helps.

  Method 1:

  You can also perform a clean boot and check if it helps.

  A clean boot to check if startup item or services to third-party application is causing this issue.

  You can read the following article to put the computer in a clean boot:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Note: Make sure that you put the computer to a Normal startup once you are finished.

  Method 2:

  You can also check in Event Viewer about what is causing the problem. Alternatively, you can publish the results, so that we can help you solve the problem.

  Open event viewer

  What are the information contained in the logs of the event (Event Viewer)