Connection for the user profile problem

Similar Questions

• XP hangs before logon for the user profile.

  Propely at startup of Windows, but XP hangs before logon for the user profile.

  The system does not start in all modes like without failure, command prompt mode, last know good Configuration. But it starts only in XP system recovery mode.

  What happened after cloning of a XP C: hard drive Sata Drive Dell OptiLex 760 to another System DELL OptiLlex 760 . I've used Norton Ghost 15.

  Hi ANM

  · Have you created an image of the system using Norton ghost backup software?

  When you create system images using backup software, it is supposed to ideally be used on the same computer, since you cloned it on another computer, it seems to me that the user profile is corrupted and failed to load.

  If the problem is the DELL OptiLex 760 system then I suggest you to connect with Norton Ghost.

  If not then you can follow the market from the link below: how to recover from a corrupted registry that prevents Windows XP startup: http://support.microsoft.com/kb/307545

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot connect to the user profile

  When I try to log on to my account on the computer at home, it doesn't let me, saying that "the service user profile Service does not log. User profile cannot be loaded. "I had problems loging a few weeks that I connect and keep getting on a temporary profile, but this has happened in the last two days. All other profiles work on the computer without any problem.
  Any help will be greatly appreciated

  Hello

  You can try to fix it with Safe Mode - repeatedly press F8 as you bootup.

  Some programs such as the Google Updater (if you added the toolbar Google, Chrome or Google Earth) has been
  known to cause this problem.

  How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  How to fix error "your user profile was not loaded correctly! You have been logged on with a temporary
  Profile. "in Vista
  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  BE VERY CAREFUL IF YOU USE THIS ONE:

  DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrrups you are TOAST.

  How to enable or disable the real built-in Administrator account in Vista
  http://www.Vistax64.com/tutorials/67567-administrator-account.html

  Use the hidden administrator account to lower your user account APPLY / OK and then lift it to ADMIN.
  This allows clear of corruption. Do the same for other accounts if necessary after following the above message.

  You can use the hidden - administrator account to make another account as an ADMINISTRATOR with the same password (or
  two with the same password) use to test or difficulty of the other.

  You can run the Admin account hidden from the prompt by if necessary.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  If you cannot access your old account, you can still use an Admin to migrate to another (do not forget to always
  not that an Admin account that is not used except for testing and difficulty).

  Difficulty of a corrupted user profile
  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Connection failure: ' the user profile Service service failed to connect. User profile cannot be loaded. »

  I'm trying to log on to my account on my laptop, and whenever I try to connect it says

  "The service user profile Service could not connect.

  User profile cannot be loaded. »

  Is it possible that I can fix this or make this standard account administer?

  (If someone can answer, could you please try and explain as simple as possible, thank you)

  Hello

  References to Vista also apply to Windows 7.

  You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account
  in Safe Mode has no default password (so unless someone has changed the password for it)
  should be available).

  Some programs such as the Google update (if you added the toolbar Google, Chrome or)
  Google Earth) has been known to cause this problem.

  Error message when you log on to a Windows Vista-based or Windows 7 computer
  by using a temporary profile: "the user profile Service has no logon. Profile of user cannot
  being responsible.
  http://support.Microsoft.com/kb/947215

  Difficulty "the user profile Service has no logon. User profile cannot be loaded. "Error in Windows 7
  http://www.SevenForums.com/tutorials/186131-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  How to fix error "your user profile was not loaded correctly! You have been connected
  with a temporary profile. "in Vista & Windows 7.
  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  BE VERY CAREFUL IF YOU USE THIS ONE:

  DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.

  How to enable or disable the built-in Windows 7 Administrator account
  http://www.SevenForums.com/tutorials/507-built-administrator-account-enable-disable.html

  Use the hidden administrator account to lower your user account APPLY / OK then lift back
  to the admin. This allows clear of corruption. Do the same for other accounts if necessary after
  the above message.

  You can use the hidden - administrator account to make another account as an ADMINISTRATOR with your same
  password (or two with the same password) use a test or difficulty to another.

  You can run the command Admin account hidden from the prompt here if
  necessary.

  How Boot for Windows 7 System Recovery Options or use a Windows 7 boot disk.
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  What are the system recovery options in Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  If you can't access your old account you can still use an Admin to migrate to a new
  (remember to always leave an Admin who is not used except for testing and difficulty account).

  Difficulty of a corrupted user profile
  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Re: Sat Pro P300 - setting for the user account problems

  Hi guys, the fact that someone knows what this means when the main user (who is the administrator of the computer) will not connect?
  It comes up with an error: the user profile service is unable to open. Profile of user cannot open.
  I can connect with all users on the computer, just not the main user. And this is the account that everything is connected too.
  So I need help! Please, I beg you.
  Thank you

  Hello

  This seems to be a known issue from Microsoft with Windows systems.

  I found this fix MS:
  + Error message when you log a computer Windows Vista-based or Windows 7 by using a temporary profile: "the user profile Service has no logon. User profile cannot be loaded.
  http://support.Microsoft.com/kb/947215

  Run the * Microsoft Fix it 50446 * mentioned in the knowledge base article should help.

• How can I connect the new installation of Windows 7 for the user profiles on a separate drive har?

  Original title: connect Windows 7 to the output of user profiles?

  I want to reinstall Windows

  My user profiles are on a separate HARD disk
  Is it possible to connect the new install of Win 7 to these existing profiles
  Or I'll create all new profiles and just move all the files manually?

  You can change the registry so that it points to your old profile folder. However, I suspect that this would cause problems because the SID and many registry keys would be incorrect for the current installation. I would like to move the folders manually.

• Windows could not connect to the user profile Service

  I couldn't use my own laptop for six months. Whenever I try to connect to my profile (profile/ONLY the Administrator profile), it gives me this:

  "Unable to connect to a windows service. Windows could not connect to the service user profile service. This problem prevents standard users to log on to the system. As an administrator, you can view the system event log to see why the service did not respond. »

  The error itself didn't come for two days now, but the problems still present themselves:

  -My personal profile seems gone.

  -Impossible to connect to the internet (my connection is fine, I use another laptop on the network even in the same House now)

  -Return to default settings

  -Slower than usual start.

  I tried the solutions that have been everywhere online and none of them worked for me. Help, please? I'd like to have my laptop back...

  Additional info: Im using a laptop Windows 7 Dell Inspiron (1564) and there is no point of restoration since before the error. I tried the Regedit fix and it didn't work and it doesn't let me delete the profile owner / administrator as to make a new one.

  To correct this corruption of user profiles, consult a guide to recovery of lost password Windows 7 Home Premium account user, can't connect, connection problem

  Him begins the article with some basic steps you can take and then work upwards through more complicated methods where the easiest do not solve the problem. Please read the intro, but I think it will be the 8 method which solves your problem. Follow the precautionary measures later in the thread as well.

  You could be up & running again within an hour, probably less.

  If you have any questions, then post them here [i.e. don't post in the thread linked as it is already very long]; I'll keep an eye on this issue.

• BlackBerry Smartphones BlackBerry ID / connection for the apps world problems

  I am unable to connect to the BB apps world or my BB ID. When asked for my email address and security question, I am known, and I do not know the answer to my security question! No idea how I can reset my login details?

  Hello and welcome to the Forums at you two!

  Try the steps in this KB, even if the description of the problem is not the same as yours:

  • KB25521"" is not available for download on BlackBerry App World "appears when you try to download an application from BlackBerry App World "

  Are you trying to do, with your BB attached to your PC, open a session in AppWorld from your PC and get the link with your BB AppWorld.

  So the bad news is... If you cannot work here, there is only one thing that remains to be done. You must find the initial Welcome e-mail, you received when registering for AppWorld... insofar as there will be a link that allows you to remove your AppWorld account. Then, re-create the BB ID/AppWorld account, using the same credentials. This process is supposed to add a link to your account at the end of the RIM, providing you access to AppWorld AND also all of your previous purchases showing in MyWorld.

  Good luck!

• Connection for the folio Builder problems

  I am having problems connecting to the Folio Builder, and three of my colleagues. We get the following error:

  Connection failed.

  Network outage.

  Anyone else having this problem? The network is down?

  Hi, we currently have a breakdown of the system by which the signature is affected.

  Our engineering team is working on it and will update the status page as soon as POSSIBLE.

• The user profile Service has not logon. User profile cannot be loaded. (I am the administrator)

  The above message appears when I try to log in.  He only started past today, for no apparent reason.  I can access a different account on my computer, but that information is stored on my own connection.  The administrator so I cannot get a more far by creating other accounts etc, (which would not have the info I need anyway).  Help... I work from home so it's impossible to get anything done.  Thank you.

  Hello suestev,

  Thanks for posting your question on the Microsoft answers Forum.

  Please see the Microsoft KB article below for assistance with the error:
  KB 947215 - error message when you log on a Windows Vista-based computer by using a temporary profile:
  "The user profile Service has no logon. Unable to load the user profile.
  http://support.Microsoft.com/kb/947215

  I have included several links that addresses the error message for the user profile cannot be loaded.
  You profile might be corrupted and needs to be recreated.

  You can also check the tutorial to
   http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  Good thread on Technet dealing with corrupted user profiles
  http://social.technet.Microsoft.com/forums/en-us/itprovistasecurity/thread/e806dd5d-6764-463e-B181-e3aaee271231/

  How to fix a corrupted user profile:
  http://windowshelp.Microsoft.com/Windows/en-us/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  If please reply back and let us know if these articles have helped solve your problem or if you still need help.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Fix using Microsoft 50446: the user profile service service has no logon. User profile cannot be loaded.

  About Microsoft fix 50446 found here http://support.microsoft.com/kb/947215#letmefixit for the user profile Service error, I have three questions about it:

  1. what exactly does this automated solve this downloadable program change / do?

  2 would you recommend to fix "user profile Service service has no login" or would you recommend that the problem resolved manually?

  3. currently, when I log on my computer's built-in Administrator account using safe mode, I am unable to change any other user account or create a new user account.  I'm unable to connect to is account only administrator of my computer.  If I delete this account, I then will be able to create a new administrator account by using the built-in Administrator account on the computer that is running in safe mode?

  Any help on this is greatly appreciated.  Thank you.

  Mr Wizard is essentially the same as the manual process. If there is a difference, I'm not aware.  Personally, I prefer manual processes that I feel I have more control - but others prefer the automated process, because it is simpler.  The choice is yours and I don't think in the long run it's important.

  Question 3 is more difficult to answer.  As the only administrator account on the system, remove leaves you only with the built-in Administrator account which, currently, is not working as you can not use it even to create another administrator account.  Here, the hope is that the patch will solve the underlying problem and the high administrator account will work as normal once the fix is completed - however, I can't guarantee that will be the case because I've never done this procedure when the problem of account is the only account to administrator on the system.

  It should work, but if it isn't then you will be in the situation where you have no active and functional administrator account (if even the built-in Administrator account does not work as an administrator account - as seems to be the case at the moment, but can change once completed correction - or for some reason any cannot be enabled or accessible) and the only solution to this problem is a clean install.  For this reason I recommend you make a backup completes before attempting this, unless your data will be safe.

  I should add that I'm not sure that you have many choices, because this is pretty much the way to solve this problem and I do not know other solutions that work.

  I hope this helps and that I could be more reasssuring, but that's as far as I know the problem, the fix, the situation, the solution proposed and the potential consequences.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• intermittent connection problem: 'the user profile Service service has no logon. The remote procedure call failed and did not execute. »

  Hello, I'm having intermittent problems with logging in my Windows 7 computer.

  Often after reboot due to applications of Windows Update or any simply restart after the holidays, I have the following message on trying to connect:

  "The service user profile Service has no logon. The remote procedure call failed and did not execute. "

  When I click 'OK', the machine disconnects and try to restart.  This can occur 2 to 5 times before _works_ .  But sometimes it happens at all.  And sometimes he _partially_ connects, but my "reminder" and the "Sidebar Gadgets' not loading not correctly and I get a different RPC error - for example, I lived once a message RPC over Skype cannot work because the remote procedure call failed.

  I'm fairly certain that it is different from the frequently reported issue 'profile of corruption', which was experienced by others.  This problem manifests itself as 'the user profile Service does not log. The user profile could not be loaded "and is reported as a blocking problem consistently reproducible which is set by the 'fixing' of the profile.

  However, the issue I feel is clearly related to an RPC problem is intermittent and not consistent - maybe one of my devices is not reset properly?  Where I can look in the logs of Windows, to provide relevant information on this subject?

  Because my computer was still under warranty, I have raised the issue of Dell and they removed the damaged system file (user account) last week.

  I hope that this will finally fix the problem (previously the error message disappear and reappear after a few weeks later.)  I'll give it a few more weeks to be sure.

• problem opening session: the user profile service failed to connect

  original title: problem opening session

  I have 2 accounts.recently, user when I try login I get this message that says - user profile service is not logon.the another account is still ok.what happened past and how to fix

  This isn't the FULL error message. Next time please make sure you post the message in its entirety and verbatim.

  Is that what your error message: unable to load the user profile and the user profile service has not the opening of session

  If so, please read on...
  You have another admin account , you can connect?
  If so, please do and do a system restore, if no help, run the Microsoft Support tutorial below.

  If you don't have another admin account, go into safe mode.
  Here's how to get safe mode:
  Shut down your computer > turn it back on and immediately and repeatedly press F8 key until you see a black and white screen. The top/down arrow and selectSafe Mode with network.

  In the window of logon in safe mode...
  1 can connect to your account administrator in safe mode?
  If so, do a system restore first, if not help, run it
  Microsoft support tutorial below.

  2. If you cannot connect to your own account, you see another
  next to your admin account in the logon screen?
  If you do, that one is the built-in Administrator account. By default, there is no password. Connect to it and new to do a system restore first, if no help, run
  the Microsoft tutorial support listed below.

  If you are able to log on in safe mode, do a system restore. Choose a
  Date of when you were able to log in NORMAL MODE as your restore point.
  How to restore the system:
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  Tutorial from Microsoft support :
  http://support.Microsoft.com/kb/947215
  There are several methods, go through one by one.
  Method 3 has a "fix it for me" application

• Connection problem: unable to load the user profile.

  Hello dear community HP,.

  We cannot open a session more although we think that we use the correct password.

  The error we receive is as follows:

  "The user profile Service has no logon. User profile cannot be loaded. »

  Product name (model No.): HP G5250BE - 5 CI3/550 M

  HP G5000 series

  We use Windows 7 Home Premium

  Thank you very much for your help.

  Best regards

  Ludgard

  Hello

  You can try the following.

  Shut down the PC.  Tap away at f8 that you start the PC to enter the Windows Recovery Console.  Use the arrow keys to select Safe mode and press ENTER.  If windows will load in this mode, on the Start Menu, click principally made programs, click Accessories, click System Tools and run the system restore.  Choose a restore point at least 24 hours prior to the issue of logon and then proceed to the restoration.  When you are finished, Windows will restart as normal in order to check if you can now connect correctly.

  Another option if the above does not help is as follows.

  Shut down the PC.  Tap away at f8 that you start the PC to enter the Windows Recovery Console.  Use the arrow keys to select "Start using last good known Configuration" and press ENTER.

  Kind regards

  DP - K

• I also, I get the error "the service user profile Service has no connection, failed to load the user profile" but I have not been able to correct the problem by following the listed solutions.

  I got the error "the service user profile Service has no connection, failed to load the user profile" when you try to use my desktip.  It is on the login page.  My account icon loads and the guest account. I have enter my password as an administrator and get the error message listed above. I followed all the solutions I could find and it is not corrected.

  I have a slight hitch, after several failed here, I checked the domestic Group on my laptop and I have high listed as connected to the Group Home Office; with all the files.  How can I fix the desk top to coinside with his status of being online.  Yet once, my counter top will not recognize the password, but the desk top shows online in the home group.

  Home Group is Windows 7.

  Here is the Vista Forums.

  What operating system do you use?

  Vista info below:

  ·                        Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not work:

  ·                        http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  See if the information in the above tutorial will help you.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  Difficulty of a corrupted user profile

  After creating the profile, you can copy the files from the existing profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/kb/947242

  A temporary profile is loaded after you connect to a Windows Vista-based system

  See you soon.

  Mick Murphy - Microsoft partner