Connection internal drive Bay multimedia input usb dislodged the HP Pavilion m9350f?

Similar Questions

• Internal drive not found, trying to reinsert the hard drive Alienware R4

  I had a few problems leading to myself for buying a new drive hard drive for this reason "internal drive not found, try to reinstall the hard disk.

  I did a test of Epse and found that the hard drive had problems.

  so I went out and bought a new, replaced the old and the new and always with the same error "internal drive not found, trying to reinsert the hard drive."

  I ran the test Epse, there is no problem with anything, it was a successful test. So why am I still unable to cross the screen?...

  Anyone have by chance any suggestions as to why it is continue to happen? Can I get a helping hand please? :/

  OK, I think I'm making progress.

  I changed my starting uefi to legacy, now I'm on the screen of windows install! Woohoo

  one problem, I don't have a windows installation cd or anything, I have to buy windows 7?

  or is there something I can do to restore my original?...

• Disk W530 Hard Drive Bay Adapter problem

  W530 ordered on 14/01/2014. I replaced the 500 GB with a SSD hard drive and wanted to use the reader HGST it came with a disc of Nimitz adapter. I can delete the partition and create a new volume, but it fails during format. It fails even when it is formatted a ready to use.

  I have a 250 GB drive at 5400 RPM Hitachi which works very well in the Bay. With the help of a USB drive Bay I can delete the volume and rebuild the drive of 500 GB. Why do I have a problem with this drive in the drive Bay?

  I plugged the hot formatted disk and it lights up immediately, I backup on it now. I don't know why I got so many problems earlier.

  Thanks for the reply.

• Pocket drive Bay installation media.

  We have a HP Pavillion A6710T a 32 bit with a HP Pocket Media drive Bay OS installed Windows Vista.  We decided to upgrade to a HP Pavilion HPE H8 - 1360T running on a Windows 7, 64-bit OS, the drive Bay can be transferred from the old system to the new, or will we just use the USB cable?

  Answered my own question.  After tearing apart the two computers, it seems, Bay Pocket Media Player can be moved from one system to the other.  However space is tight and would bring down the new system further than just an exchange of normal PCI card.  Much easier to just leave it alone and use the USB cable provided with the PMD.

• Will there be a second drive bay in HP Pavilion 17-f072no?

  I bought a HP Pavilion 17-f072no and I was going to add an SSD in it like and add to the HARD drive, but I found it has a solid base, while my previous pavilions and Envys have trapdoors separated for drive bays.

  Before removing the base plate, I would check this model has a second HARD drive Bay?

  Manual: http://h10032.www1.hp.com/ctg/Manual/c04402649.pdf

  Go through page 43, 105, 106

  A hard drive Bay is according to the manual.

  Kind regards

• Replace the HHD Pavilion m7 with SSD boot drive

  I have a Samsung 840 Evo SSD that I managed to install in the 2nd internal drive Bay. It works great as a second internal drive, but I want to make the boot drive for Windows 8.1 or simply swap with the internal HD, which is the current startup disk.

  I used the program Samsung disk magician to clone the internal HD to the SSD, but it does not appear in the BIOS, so I can't select it as your startup disk. I tried to boot from the SSD with the internal HD disconnected and it fails, apparently because the laptop does not see the operating system on it.

  I updated the BIOS to F.29, which is the current version, but the SSD simply does not appear in the BIOS.

  Any help is most appreciated!

  jamesinsf wrote:

  I still have the problem. Anyone have any ideas? Thank you.

  Go to disk management and check if the SSD is an indicator of STARTING activated. Use Gparted: http://gparted.org/

• I installed an external USB connected hard drive Seagate, it slowed the computer and check the new disc repeatedly

  Hello

  I installed an external USB connected hard drive Seagate to copy some movies and pictures of my HP laptop with Vista, but it became a big problem. It slowed the computer and check the new disc repeatedly. Then it wouldn't start without the external drive at all but it was working fine once he was conducting with the external hard drive. So thinking I can outsmart the computer, I uninstalled the drive from Control Panel. Now it primer not at all. The computer lights up briefly and then goes out of itself almost immediately, is there a solution to this? Thank you

  SOM

  Original title: startup problem

  Hi SomBhattacharya,

  Please try the possible fix following first thanks to Carey Frisch:

  1. open the BIOS of the motherboard.
  2. find where it says Priority Boot Device, then select CD/DVD-ROM 1, 2nd Hard Drive and disable all the rest.
  3 find somewhere in the BIOS where it says BOOT USB, Wake on USB, etc. and disable all unnecessary options.

  And second if it does not help, you can try the following with Blue Michael:

  Local Geek Squad had me intentionally set the BIOS to the correct order, then re-order and SAVE.
  It worked, even if the list of the BIOS was always in the right order.

  I hope this helps!

• An operating system can be downloaded on a USB connected hard drive?

  The University I attend offers an upgrade of the Sytems operating through download. I want to upgrade to Windows 7, but do not have the capacity on the SSD drive in my notebook. This OS can be downloaded on the hard disk the new SSD when connected to my computer via a USB port?

  What size Flash drive works best?

• I have an old hard drive with Adobe Photoshop 7 on this subject, I connected it to my computer via usb, when I try to load it says 'Can not complete your request because of missing or invalid personalization information' I paid for this program and I know

  I have an old hard drive with Adobe Photoshop 7 on this subject, I connected it to my computer via usb, when I try to load it says 'Can not complete your request because of missing or invalid personalization information' I paid for this progra

  It is a product obsolette, the server can activate it no more.

  You can use CS2 error: "Activation Server unavailable". CS2, Acrobat 7, Audition 3 downloads & serial number are given.

  Concerning

  Stéphane

• Connecting floppy drive USB - name file empty

  A friend of mine has just started using VMWare Fusion to run a virtual machine from Windows XP.  She has a player from USB floppy that she tried to connect to XP using 'Virtual Machine-> USB-> Connect floppy drive', but he tells her that she cannot have an empty file name.

  I looked at the manual and it talks about the connection to a floppy image file, but nothing about the use of a USB floppy drive.

  Is there something special that needs to be done to use a USB floppy drive?

  I don't have a floppy drive on my Mac, so I can't test anything myself.

  Thank you

  She has a floppy drive USB that it tried to connect to XP using "Virtual Machine-> USB-> Connect floppy drive", but he told her that she cannot have an empty file name.

  On my Mac, I can connect a USB floppy drive to a virtual machine if there a disk in there.  Also, the error message 'cannot have an empty file name' is bound using a virtual floppy not a USB floppy.

  Is there something special that needs to be done to use a USB floppy drive?

  No connection a USB floppy is no different then any other USB device to connect to a virtual machine.

  The only downside is you can not boot a Virtual Machine directly from a USB floppy and the simplest solution is to use a virtual floppy drive.

• HP ENVY 17-j161ea Leap Motion TS SE Notebook PC - internal 2 drive Bay

  Hello

  There is a 2nd, empty, a drive inside this laptop Bay.

  However, it came not with a cart or a connector for this 2nd drive Bay.

  How can I get this wagon equipped with a connector.

  Thank you.

  You can buy it here:

  http://www.newmodeus.com/shop/index.php?Main_Page=product_info&cPath=2_5&products_id=542

  HP provides only on models where they provide 2 discs.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• The HP ENVY 17 t-k000 CTO Notebook PC support 2 internal drives?

  I have a Samsung 1 TB SSD 840EVO I want to position as boot drive and use the existing 1 TB internal HDU as the backup. The HP ENVY 17 t-k000 CTO Notebook PC will support two internal drive? I have the 17 t WANT to HDDSSD Solutions and cable assembly cart.

  PLD2 wrote:

  I have a Samsung 1 TB SSD 840EVO I want to position as boot drive and use the existing 1 TB internal HDU as the backup. The HP ENVY 17 t-k000 CTO Notebook PC will support two internal drive? I have the 17 t WANT to HDDSSD Solutions and cable assembly cart.

  For the HP ENVY 17 - k000 Notebook PC model, there is No second Bay of disc - hard

  

  Your model is customized model ("17 t-k000 CTO") this series of basic model, it will not be a secondary HARD drive Bay.

  To confirm, you will need to open & see-

  To get into the HARD drive, you have to-remove the battery, the optical drive, rear corner covers, hood & USB card.

  Contact HP for more details about your specific model.

  Kind regards

• Pavilion 500-098: adding hard drive, but no 2nd hard drive Bay

  I want to add a second internal hard drive to this computer, but unfortunately the computer has only a hard drive Bay. There is plenty of space for a second hard drive, I thought that I would put the player in the unused space, setting in place somehow so that it does not move. I know I could install an external hard drive, but prefer to have an internal hard drive. The power supply has a supplement of power supply (unused) harddrive.  The motherboard is a Joshua-H61-Μatx. It has 4 SATA connections on it.  SATA0 is connected to the hard drive, SATA2 is connected to the DVD player. SATA1 and SATA3 are free. My idea of adding a second hard drive without a second HDD Bay would work?

  Hi Mike,.

  Review the information that is displayed in this thread.

• Internal speakers work but no sound when the headphones are connected.

  Internal speakers work, but no sound when the headset is connected Mr. fix gives a clean and level flight controlpannel indicator report / sound show sounds present but no sound on 3.5 mm jack audio 6.0 vista Home Basic travel mate acer 2480 laptop.

  Ive seen to be a common problem and have tried everything short of putting my computer or the cabel in the freezer for this problem, although I had an old pair of computer speakers that the power of the headphone plug in my garage-30 and a jack 3.5 cold didn't help.

  Most recent driver realtek audio and Manager running audio acer, everything seems fine all levels on and not cut anything off
  Lists of control pannel/sound/speakerproperties
  control information
  Realtek High Denifnition
  Reatek'a

  Jack information
  LR ATAPI internal ATAPI
  LR 3.5 mm Jack (will disappear if not plugged headphones\auxcabel)

  some levels are muted
  Advance tab default settings
  quality of studio 24 bit 48000 Hz

  boxes of exclusive mode checked (when it is disabled, that no sound was heard)

  Information appears a jack was pluged into and when unplugged.

  the computer knows its their and it shows his work but ive tried several pairs of headphones, including the new ipod with the remote, I tried an old pair of speakers that have no other energy source that 3.5 mm cord all work witch on my i pod, I also tried pluging in a splitter first and also an adapter to use a guitar cord pluged amp in an another apapter back down to 3.5 mm a little stupid and redundant but I didn't lie when I said I TRIED EVERYTHING I could think maximum\ read forums\ many watch on youtube.

  computer repair guy told me that fault call manufacturing equipment but guaranteed was 2 weeks upwards.
   
  I do not think it is a matter of hardwear tho and am convinced that it can be resolved is so close to work, I'm sure there must be a setting or patch or codec sumthing that will correct the problem, but it's my first (LIRA) ask for help.

  With frequent this problem or other similar appear from what my research has shown that I don't know that it can be resolved, or millions of laptops with drivers realtek audio hd are all defective.

  My next try is an external usb sound card. I tried already but no stores in my area have them (Wal-Mart, the source, Staples), all had never heard what I was talking about. I saw on the web less than 5 dollars but have no confidence in the sites offering the devices. Has anyone bought from a trusted site.  could talk to the teak of microsoft but they wanted to charge me $ $50 so decided to save money to buy a card usb sound, if I can't solve the problem.

  Sorry for any ignorance or typos and long reading but I hope someone can help with this problem

  Check with the manufacturer of your system's support and their forums (if any).

  Have you checked on the website of the manufacturer of the device for the latest drivers?

  Realtek - HD Audio Codec Driver right side
  http://www.Realtek.com.tw/

  Download - SAVE - will click with the button straight on and RUN AS ADMIN

  NOTE: Often restore audio drivers to check the version after installing and restarting is
  see if the version you have installed is there, otherwise repeat the installation - restart until it is. This may take
  several tests according to the recommitments how much he makes.
  Rob - bicycle - Mark Twain said it is good.

• Initialization of the NAS 200 without internal drives?

  You just bought a NAS 200. Do not have the SATA disks to put in it right now, wait until I can pick up of large capacity disks. Having several external USB drives that I would use. I was wondering if the NAS200 may start without having to install the internal disks. Then I can use it as a bridge of network connection to my external usb drives. Just wondering if you can get it even start without at least 1 Reader installed.

  Thanks for any help

  Well, it plugged in, it starts, and it starts fine. Once I plugged a USB at the back once it was connected to my network. All I had to do was to format in FAT32 NTFS and it works fine. Even updated the firmware using the integrated very well. Overall pretty happy, I can use my external drives until I get some internal parts SATA for the NAS.