How to solve a bucket of blue screen - 0X9F_3_POWER_DOWN_IMAGE_RTKVHDA.sys, type 0 "error

Similar Questions

• I need advice on how to solve a problem of blue screen.

  Whenever I leave my computer for 15-20 minutes, I get a blue screen.  The error message is the following:

  Stop: 0x000000F4 (0 x 00000003, 0x8AB5D588, 0x8AB5D6FC, 0x805D22AA)

  This line is followed with:

  Beginning physical memory dump

  The only way to close this blue window via the power on / off switch.

  I came back to an earlier backup and the same problem exists... I did a chkdsk /r recovery mode task, and that did not help... I took several recommendations that I found the Internet regarding how this fix did not work - nothing I've tried has solved this ongoing problem.

  Can someone give me a clue as to what the error is all about and how can I solve the problem?  Needless to say, I am lost on what to do next and any help sent my way will be greatly appreciated.

  Windows XP Pro Service Pack 3

  Frog

  Sorry that I was unable to return to it so far.  My computer decided to crash shortly after sending my first message in this thread.  A hard drive test informed me that she had not.  I decided to take my computer to the store for a new hard drive.  While there, the technology has attempted to re - install the software from my old hard drive on the new hard drive - that didn't work because the operating system was corrupt.  Thus, only the new operating system has been reinstalled on my new hard drive and I am just now able to get back to the internet.  Fortunately for me I had a backup of the system.  Although the back-up also had a corrupted operating system registered on it, this backup made allowed me to look at what was on my system before installation of my new hard drive.  In any case, I now work to restore the software that was previously on my computer.

  Yet once again, sorry for not responding not sent help my way - it was out of my control.

  Thanks for the replies.

  Frog

• How to solve the problem of blue screen and PFN_LIST_Corrupt?

  Hi, I need help from the community with this problem is driving me crazy, my PC off and get this error message.

  Run memtest. If it has errors, replace the memory

• How to troubleshoot and resolve the blue screen (STOP: 0x000000F4 (0xFFFFFA800BCF4B30, 0xFFFFFA800BCF4E10, 0 x 000000000000003, 0xFFFFF800031D4460)) questions for new construction

  I just finished a new construction, including Windows 7 Home Premium 64-bit.  Update all the drivers went through, and now I get BSOD.  Initially, I'd get them, after that the system wake up to 'sleep' mode, but this morning I received after you start the computer from the closure.  They are the mistakes STOP F4, and I'm sure that there is a way to fix them, I just need help on where to start.  After a few reboots to check the version of the BIOS and what not, the computer would no longer connect to the internet.
  Here is my configuration:
  CPU: Intel Core i3-3225 3.3 GHz Dual - Core Processor
  Motherboard: ASRock H77M Micro ATX LGA1155 motherboard
  Memory: G.Skill Ripjaws X Series 8 GB (2 x 4 GB) DDR3-1600 memory
  Storage: Intel 330 series 240GB 2.5 "Solid State Disk
  : Fractal Design Arc Mini Micro ATX mini-tower case
  Power supply: Rosewill Capstone 450W 80 PLUS Gold Certified ATX12V / EPS12V power supply
  Optical drive: Lite-On iHAS124-04 DVD/CD burner
  Operating system: Microsoft Windows 7 Home Premium SP1 (OEM) (64-bit)
  Other: 2 x Western Digital Caviar Blue 500 GB 3.5 "7200 RPM hard drive internal

  And here are two mistakes STOP I was able to capture up to now:
  STOP: 0X000000F4 (0XFFFFFA800B938B30, 0XFFFFFA800B938E10, 0 X 000000000000003, 0XFFFFF80002F80460)

  STOP: 0X000000F4 (0XFFFFFA800BCF4B30, 0XFFFFFA800BCF4E10, 0 X 000000000000003, 0XFFFFF800031D4460)

  This was my first computer build and I really enjoyed until the software part; simply too many current intangibles.  A lot to learn and I'm happy to do, but my wife would like a stable computer.

  Original title: how to troubleshoot and resolve problems blue screen for new construction

  Hello

  Bug_Check F4 is generally hard, cables, and associated hard drive controller.

  Since this is a new construction House remove ALL power - reinstall all memory cards and cables (on
  both ends where possible) - actually delete and replace - do not just tight. Make sure heat
  sink and compound are correctly placed and that all lovers of work.

  Check with the ASRock support, their documentation online, the diagnosis and ask in their forum
  for problems known.

  ASRock - Support
  http://www.ASRock.com/support/index.asp

  ASRock - Forums
  http://www.ASRock.com/support/forum.asp

  ASRock - downloads
  http://www.ASRock.com/support/download.asp

  =============

  See this article:

  You receive various Stop error messages in Windows 7 or in Windows Server 2008 R2 when
  you try to resume a computer that has a large hard drive SATA.
  http://support.Microsoft.com/kb/977178

  -----------------------------------------------------------------------------------------------------------

  Resolve errors stop (blue screen) in Windows 7 - has a section for if you can or cannot start Windows.
  http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

  Check this thread for more information using BlueScreenView, MyEventViewer and other methods
  to troubleshoot the BlueScreens - top 3 responses (+ 1 other).

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/sometimes-i-get-a-blue-screen-when-using-IE-8/c675b7b8-795f-474d-a1c4-6b77b3fcd990

  We can analyze the minidumps if make you it available to the SkyDrive or another file
  sharing sites (such as MediaFire). If you have problems to download the copy of minidumps
  for the office or in the Documents folder and download them from there.

  ZIP or download the content of the C:\Windows\minidump

  Use SkyDrive to upload collected files.
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  ================================================================

  BCCode: F4 0x000000F4

  Check and reinstall the cards memory and cables (at both ends where possible) in fact
  delete and replace - do not just tight. On a laptop computer on all you can do is reinstall it
  memory and possibly check the connection/contacts on the hard drive. Memory could
  be the problem, so if you have more than 1 stick swap them in and out to see if the
  problem follows a stick or try the new memory. Antivirus/anti-spyware/security programs
  have been known to cause or have a role in this matter.

  More general patch updates day and low level chipset BIOS drivers and other control
  software.

  Also check the wiring on the hard drive.

  =========================================================

  Bug Check 0xF4: CRITICAL_OBJECT_TERMINATION

  CRITICAL_OBJECT_TERMINATION bug control has a value of 0x000000F4. This indicates that a process or thread crucial to system operation has unexpectedly is released or ended.

  Important info if you received a STOP Code
  

  If you received a blue error screen, or a stop code, the computer stopped abruptly to protect against data loss. A hardware device, its driver or software might have caused this error. If your copy of Windows is shipped with your computer, contact your computer manufacturer. If you purchased Windows separately from your computer, Microsoft provides support. To find contact information for Microsoft or the manufacturer of your computer, Contact Support.

  If you have experience with computers and try to recover from this error, follow the steps in the Microsoft article solution STOP (blue screen) errors in Windows.

  These actions could prevent a mistake like this does not happen:

  1. Download and install updates for your computer from Windows Update device drivers.
  2. Scan your computer for computer viruses.
  3. Check your hard drive for errors.

  CRITICAL_OBJECT_TERMINATION parameters

  The following settings are displayed on the blue screen.

  Parameter	Description
  1	The Terminal object type: 0x3: Process of 0x6: Thread
  2	The endpoint object
  3	The name of the process image file
  4	Pointer to a string ASCII containing an explanatory message

  Cause

  Several processes and threads are necessary to the functioning of the system. As they are completed for some reason, the system can no longer function.

  BCCode: F4 0x000000F4<-- read="" this="">
  * 1241.html http://www.faultwire.com/solutions-fatal_error/A-process-or-thread-crucial-to-System-Operation-has-0x000000F4-

  ==================================================================

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  -------------------------------------------------------------------------
  Also this, so you can see the probable bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant
  (also, Windows 7 and Windows 8).
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  -------------------------------------------------------------------------

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
  info that would help. Such as ITC and 4 others entered at the bottom left. And all others
  error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during ' blue screen
  of death "crashes and displays the information about all crashes in one
  Table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
  There are other causes.

  You can do mode if necessary safe or the Vista DVD command prompt or
  Options recovery if your system is installed by the manufacturer.

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  You can try a system restore to a point before the problem started when one exists.

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates cbs.log Windows Vista (and Windows 7)
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible
  driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista (also Windows 7) Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Stop Windows 7 to automatically install device drivers
  http://helpdeskgeek.com/Windows-7/stop-Windows-7-from-automatically-installing-device-drivers/

  How to disable automatic driver Installation in Windows 7 / Vista
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/

  Turn off Windows Update Device Driver search prompt in Windows 7 / Vista (for professionals,
  Ultimate and Enterprise)
  http://www.AddictiveTips.com/Windows-tips/disable-Windows-Update-device-driver-search-prompt/

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting Vista Blue Screen, error of JUDGMENT (and Windows 7)
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  Startup Options recovery or Windows 7 disk repair

  How to run a startup repair in Windows 7
  http://www.SevenForums.com/tutorials/681-startup-repair.html

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  How to do a repair installation to repair Windows 7
  http://www.SevenForums.com/tutorials/3413-repair-install.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Blue Screen Atapi.sys - continues to come on start up...

  I got this blue screen Atapi.sys

  Address F8568256 base at F8560000 datestamp 4802539d

  I had that before. I don't understand that I solved it, but it was a headache and I don't remember what I did.

  The fact that I get it every few months is a stressful thought.

  Can anyone help?

  I scanned my computer and nothing comes up as a virus. Maybe this isn't picking up. I'm not sure. If this is the case, how I remove it manually if it is a virus?

  The atapi.sys (or mechanism) is known to be a target of malware, so I'd start here:

  Your system boots very well?

  Describe your current antivirus and software anti malware situation: McAfee, Norton, Spybot, AVG, MSE, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  To eliminate the questions and riddles, please provide additional information on your system.

  Click Start, run and enter in the box:

  Msinfo32

  Click on OK and when the system info summary appears, click on Edition, select all, copy, and then paste the information here.

  There will be some personal information (such as the user name and the name of the system), and anything that turns information private for you, simply delete the pasted information.

  Perform scans for malware, and then fix any problems:

  Download, install, update and do a full scan with these free malware detection programs:

  Malwarebytes (MMFA): http://malwarebytes.org/

  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/.

  They can be uninstalled later if you wish.

  If you get the blue screen of death, we need more information, and here's how:

  Download BlueScreenView here:

  http://www.NirSoft.NET/utils/blue_screen_view.html

  Unzip it and run it (BSV installs nothing) and let him complete the digitization of all of your files to dump.

  If you double-click on depressed, you will get information on it (including the field caused by the driver) and you should be able to spot the problem right away - especially if you see a model in landfills where Caused by field pilot is the same (beginning with this driver).

  Select (highlight) one or more of the most recent dump files by clicking on them and hold down the CTRL key to select multiple files.  Try to select only the most recent links that relate to your problem (perhaps five or six to start dump files).

  Click on file, save selected items and save information from the dumps to a text file on your desktop called BSOD.txt.  Open BSOD.txt with a text editor, copy the text and paste it in your next reply.

  Here is an example of the report since a single BSOD BSV I initiated on purpose that indicates the cause of the accident as the pilot i8042prt.sys belonging to Microsoft Corporation:

  ==================================================

  Dump file: Mini062110 - 01.dmp

  Crash time: 21/06/2010-11:51:31

  Bug Check String: MANUALLY_INITIATED_CRASH

  Bug check code: 0x000000e2

  Parameter 1: 0x00000000

  Parameter 2: 0x00000000

  Parameter 3: 0x00000000

  Parameter 4: 0x00000000

  Caused by the driver: i8042prt.sys

  Caused by the address: i8042prt.sys + 27fb

  Description of the file: i8042 Port driver

  Product name: Microsoft® Windows® Operating System

  Company: Microsoft Corporation

  File version: 5.1.2600.5512 (xpsp.080413 - 2108)

  Processor: 32-bit

  Computer name:

  Full path: C:\WINDOWS\minidump\Mini062110-01.dmp

  ==================================================

  Please vote my posts as helpful so I can get a lot of points. I'm saving for a pony! Everybody don't like Raymond.

• What is the meaning of fault bucket - 0xA_nt! KiUnwaitThread + 1 b, type 0 error on blue screen?

  Help! I need to fix the blue screen...

  Hi JeanLinendoll,

  (1) what is the complete error message you receive?

  (2) since when you experience this problem?

  (3) remember to make changes?

  (4) when exactly this question produce?

  I believe that you are able to get on the desktop after the system hangs, follow the below steps to fix this problem.

  Method 1: you can follow the steps described in the article below, which deals with a similar question

  You randomly receive an error "Stop 0x0000000A" in Storport.sys when you start Windows Vista
  http://support.Microsoft.com/kb/930261

  Method 2:  Select the boot and then check if the problem persists

  Follow step 1 in the link below,

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.

  Continue with the remaining steps to pin-point on the third party service.

  After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

  Important: n ' forget not to put the computer to a normal startup follow step 7 in the link

  Method 3: You can also follow the steps mentioned in the article below

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart unexpectedly

  http://support.Microsoft.com/kb/958233

• How can I fix freezes/crashes/blue screens

  I can't understand how to prevent my laptop freeze suddenly and 'blue screen '. I have to turn off and restart. This happens more often. I have an urgent need for a solution to end this mess.

  Thank you

  Stan

  Hello

  If you have freezing and screens, chances are your event log is blue will say it is caused by a driver. So what I've done since I've had trouble finding this driver it was and that is to install, I downloaded SlimDrivers free on this site: http://download.cnet.com/SlimDrivers-Free/3000-18513_4-75279940.html
  It is an open source freeware driver updater that really works and I used it and so far no crashes.
  Computers are supposed to make things easier then why labor minidumps and scouring the internet for drivers when you can get a program to do it for you with a few clicks of the mouse.
  Good luck

• How can I fix Windows 7 "blue screen"?

  Hello, recently my computer has got these horrible accidents that have stopped my computing experience quite suddenly. So far, I did a lot of things to try to solve these problems, including:

  • Reinstalling the video drivers.
  • Update of the OS
  • Run the windows memory diagnostic
  • Etc.

  Here's a detailed analysis on my most recent crash:

  13:03:53 GMT on Tuesday, July 28, 2015 crashed your computer

  crash dump file: C:\Windows\Minidump\072815-10982-01.dmp

  This was probably caused by the following module: ntoskrnl.exe (nt + 0x4B2EFC)

  Bug check code: 0 x 124 (0, 0xFFFFFA8007CF58F8, 0 x 0 0 x 0 x 0)

  : ERROR INCORRIGIBLE in WHEA

  file path: C:\Windows\system32\ntoskrnl.exe

  product: Microsoft Windows operating system

  company: NT Kernel & System

  Bug control description: this bug check indicates that a fatal error Architecture WHEA (Hardware).

  This is likely to be caused by a hardware problem. This problem may be due to a thermal problem.

  The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.

  
  I know from past experience with my PC, (earlier this month, when I checked the temperature in the height of summer) this may not be a temperature problem, and it cannot be a hardware malfunction, because the disadvantages would be much more sensitive. Can you please tell me how to solve my problem with my PC?

  They are called BCC124 and are related to the material.  Read how to diagnose and, hopefully, correct in this wiki

• Impossible to solve this problem of blue screen. Help, please!

  Help!  I am running Windows7 and receive a blue screen error message.  I ran all maintenance windows and repair programs and have a lot of memory and RAM.  This happens especially during the games.

  Here is the message I get:

  Signature of the problem

  Problem event name: BlueScreen

  OS version: 6.1.7600.2.0.0.768.3

  Locale ID: 1033

  More information about the problem

  BCCode: 50

  BCP1: FFFFF80003865A80

  BCP2: 0000000000000000

  BCP3: FFFFF80002EDC437

  BCP4: 0000000000000002

  OS version: 6_1_7600

  Service Pack: 0_0

  Product: 768_1

  Files helping to describe the problem

  C:\Windows\Minidump\111712-19578-01.dmp

  C:\Users\XXXXX\AppData\Local\Temp\WER-63742-1.SysData.XML

  I tried to access the site of minidump and could not open and searched the web for the program to open the site, but could not locate a.

  We need the DMP file because it contains the single record of the sequence of events that led to the accident, what drivers have been loaded, and what has been loaded.
  You may be able to get the DMP files without crashing by booting in SafeMode (F8) with networking.

  If you are overclocking stop.  (chances are that if you are unsure if you are, you are not)

  To allow us to help you with symptoms BSOD on your computer, download the contents of your folder "\Windows\Minidump".

  The procedure:
  * Copy the contents of \Windows\Minidump to another location (temporary) somewhere on your machine.
  * Zip up the copy.
  * Join ZIP archive to your message by using the button (attachments) "trombone".
  * Please download to a service like Skydrive or "Rapidshare" to share files and put a link to them in your answer.

  To ensure the minidumps are enabled:
  * Click Start, in the search box, type: sysdm.cpl, press ENTER.
  * On the Advanced tab, click Startup and recovery... Settings button.
  * Make sure that automatically restart is unchecked.
  * Under the writing debugging information header, select image partial memory (256 KB) in the list box drop-down (varies from 256kb).
  * Ensure to that small Dump Directory is listed as % systemroot%\Minidump.
  * OK your way out.
  * Reboot if changes have been made.

  Please also run MSinfo32 and download the output as well.
  To run MSinfo32 please go to start > run > MSinfo32
  Go to 'file', 'save' and download the PDF is saved with the DMP
  (Instructions for XP, Vista, Win 7, Win 8)

• HP ProBook G2 450: get crash with blue screen ((rtwlane.sys) driver_irql_not_less_or_equal message

  When I use internet through Wi - Fi some message crash put in time with blue screen (driver_irql_not_less_or_equal (rtwlane.sys), my adapter Wi - Fi is Realtek RTL8723BE 802.11bgn (new version) how can I solve this problem? please help me...)

  Wireless 802.11b/g/n Realtek RTL8723BE/RTL8188EE LAN drivers

  By downloading, you accept the terms and conditions of the license agreement for the HP software.
  Note: Some software requires a valid warranty, current support contract HP or a fee.

  Type:	Driver - network
  Version:	2023.9.401.2015 Rev.A (21 may 2015)
  System:	Microsoft Windows 8.1 (64-bit) | See all
  Name of the file:	sp71432.exe (35 MB)

• I have an error blue screen - Stop: c000021A (fatal system error) status 0f 0x000004t

  What is the status of Stop: c000021A (fatal system error) 0f 0x000004t.07 that it is a blue error screen that is displayed when the computer tries to boo

  Hello

  You can check this link:

  How to solve an error "STOP 0xC000021A.

  http://support.Microsoft.com/kb/156669

• Blue screen at startup - no code error and it does not open in safe mode

  Hello. I have a Sony VAIO (VGN-N130G) which is about 5 years old. I also have a blue screen error at startup. Unfortunately, there is not a code of error/message at all. I tried to start it in Mode safe mode, but it does not work... just blue screen. Is my bread cell phone?

  Hello
   
  
  Method 1.
  If you have a Widows XP installation CD, refer to the article below and check if this helps us start successfully.
  How do I recover from a corrupted registry that prevents Windows XP startup
  http://support.Microsoft.com/kb/307545
  
  Method 2.
  If the steps above do not help to solve the question I would ask you to perform a repair of Windows XP installation. See the link below for the procedure.
  Perform a repair Installation
  http://www.Microsoft.com/windowsxp/using/helpandsupport/learnmore/tips/doug92.mspx
   
   
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Blue Screen iastor.sys, STOP; 0x0000008E (0xC0000005, 0x828490B8, 0xB96DA758, 0x00000000)

  iastor.sys - address 828490B 8 physical memory base to @8280B 000, Date Stamp 48054343 - Crash Dump, dump - the disk of 100 I can work only in Mode without failure, but I can't print or scan that I need to do. Someone can help me.

  Hello

  Looks like you need to update iastor.sys:

  iastor.sys = Intel Matrix Storage Manager driver - see System/card mother Maker and manufacturer of chipset.
  This driver could perhaps was pushed to the fault by other programs such as Symantec/Norton.

  This driver is extremely difficult to install if you need system or the manufacturer of the motherboard (for custom
  bed systems) help but you could also ask on their forums (if any).

  Also check the Intel downloads audit AFTER with the system/motherboard manufacturer...

  Intel downloads
  http://Downloadcenter.Intel.com/

  Intel Matrix Storage Manager - do not forget to check DATE and set for the version of Windows and chipset
  http://Downloadcenter.Intel.com/SearchResult.aspx?lang=eng&keyword=%22matrix+Storage+Manager%22

  More help on installing iastor.sys here (System Maker/card mother Maker first consult and use that as a last resort).

  http://social.technet.Microsoft.com/forums/en-us/itprovistadeployment/thread/98f123d4-9190-4169-A376-7a0caf0ffb2a/

  ============================================================

  More troubleshooting if necessary:

  Pick up the pieces after a computer crash
  http://Windows.Microsoft.com/en-us/Windows-Vista/picking-up-the-pieces-after-a-computer-crash

  Check this thread for more information using BlueScreenView, MyEventViewer and other methods
  to troubleshoot the BlueScreens - top 3 responses (+ 1 other).

  http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/3deab2fa-4000-4136-8c78-a3d22b1db009

  We can analyze the minidumps if make you it available to the SkyDrive or another file
  sharing sites (such as MediaFire). If you have problems to download the copy of minidumps
  for the office or in the Documents folder and download them from there.

  ZIP or download the content of the C:\Windows\minidump

  Use SkyDrive to upload collected files
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  --------------------------------------------------------------------------------------------------------------

  Two main causes of this blue screen video drivers and BIOS - check with the system manufacturer
  Site for graphics (Video) card and BIOS, then on site of the manufacturer of the device for the last video. It may be
  other pilots to check there. Disable the installation of self as those who are older and if
  Updates Windows suggests a pilot just HIDE. Antivirus is another possibility.

  See methods of update driver generic in the next message.

  BCCode: 8th 0x0000008E is the same as 0x1000008E

  Cause

  Bug KERNEL_MODE_EXCEPTION_NOT_HANDLED control is a very common bug control. To interpret it, you must identify which exception has been generated.

  Common exception codes are:

  • 0 x 80000002: STATUS_DATATYPE_MISALIGNMENT indicates that an unaligned data reference was encountered.

  • 0 x 80000003: STATUS_BREAKPOINT indicates that a breakpoint or ASSERTION was met when no kernel debugger was attached to the system.

  • 0xc0000005: STATUS_ACCESS_VIOLATION indicates that a memory access violation has occurred.

  Solve the problem

  If you do not have to debug this problem, you must use certain basic troubleshooting techniques:

  • Make sure you have enough disk space.
  • If a driver is identified in the bug check message, disable the driver or check with the manufacturer for driver updates.
  • Try changing video cards.
  • Check with your hardware vendor for updates to the BIOS.
  • Disable the BIOS memory options such as implementing caching or shading.

  If you plan to debug this problem, you may find it difficult to get a stack trace. Parameter 2 (the address of the exception) should identify the driver or function that caused the problem.

  If you do not know the specific cause of the exception, consider the following:

  • Hardware incompatibility. Ensure that all new equipment installed is listed in the list of the products tested Microsoft Windows market.
  • Service driver or defective peripheral system. A chauffeur service or defective peripheral system could be responsible for this error. The hardware problems, such as BIOS incompatibilities, conflicts of memory and IRQ conflicts can also generate this error.

  If the verification of the message bug list a driver by name, disable or remove that driver. In addition, disable or remove drivers or services that have been recently added. If the error occurs during the startup sequence and the system partition is formatted with the NTFS file system, you may be able to use Safe Mode to rename or to delete the faulty driver. If the driver is used as part of the start-up procedure of the system Safe Mode, you must start the computer by using the Recovery Console to access the file.

  If the problem is associated with Win32k.sys, the source of the error may be a third-party remote control program. If this software is installed, you can remove the system startup service using the recovery and then Console by removing the offending system service file.

  Check the system log in Event Viewer for additional error messages that might help identify the device or driver responsible for control of bug 0x1E. You can disable the cache in memory of the BIOS to try to resolve the error. You must also run the diagnostics of material, especially the scanner memory, which provides the manufacturer of the system. For more information about these procedures, see the manual of your computer.

  The error that generates this message may occur after the first reboot during Windows Setup, or after installation is complete. A possible cause of the error is lack of disk space for installation and the system BIOS incompatibilities. For any problems during the installation of Windows that are associated with lack of disk space, reduce the number of files on the hard disk drive target. Search and delete temporary files that you do not have to have, files hidden Internet, application backup files and files saved.chk, which contain fragments of files on disk scans. You can also use an another hard disk drive with more free space for the installation.

  You can solve the problems of BIOS by upgrading the version of the system BIOS

  BCCode: 8th 0x0000008E is the same as 0x1000008E<-- read="" this="">
  * 1151.html? order = date http://www.faultwire.com/solutions-fatal_error/kernel-mode-exception-not-HANDLED-0x0000008E-

  =============================================

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  -------------------------------------------------------------------------

  Also this, so you can see the probable bluescreens. (If necessary)
  
  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  -------------------------------------------------------------------------

  It comes to my convenience store generic bluescreen:

  Here are a few ways to possibly fix the blue screen issue. If you could give the info to blue screen
  This would help. Such as ITC and 4 others entered at the bottom left. And another error
  information such as the STOP codes and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during 'blue screen of death '.
  hangs and displays information about all accidents of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
  There are other causes.

  You can do without if needed fail or the Vista DVD or recovery command prompt mode
  Options if your system was installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
  RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker
  (SFC.exe) program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible
  driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• When I turn on my blue screen laptop appear after windows error recovery windows also appear

  When I turn on my laptop, a blue screen appears after windows error recovery windows appear also... ask in safe mode are normal windows startup?... what I can do... is a problem on my system?... Please help me...

  Hello

  ·         What operating system is installed on the computer?

  ·         What are the error messages that are displayed on the blue screen?

  ·         Did you make any changes before the show?

  In the recovery menu, select Safe mode and check if you can connect?

  You can also try to restore the system in safe mode.

  If you are able to boot to the desktop in safe mode, then I suggest you put the computer to boot in safe mode and check if it helps:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Reference: resolution in Windows 7 stop errors (blue screen)

• I can't get into xp. a blue screen appears with the 0x0000007e error code

  I went to a blue screen.  Can I make the Windows/sysrem22/hal.dll file is missing or damaged.  I made a copy of the file on a CD from another computer, but I don't know how to load it on my desktop computer.  It doesn't work in either safe mode.  I hope that if I can get this file copied to my desktop, everything will be OK.  Help, please.  Jon

  Hi jon56b,
   
  Follow the steps listed in the article given below to resolve this issue:
  How to troubleshoot a Stop error 0x0000007E in Windows XP
   
  For error "hal.dll is missing or corrupt", you can consult the following article:
  Error message: "Windows did not start because of a configuration of the disk of the computer problem.