connection issues - unable to connect to the Internet after the elimination of viruses

computer has had the virus in the start menu... ran the antivirus... took care of them... now can't connect to the internet. another pc which is networked with this one game a router is fine... any ideas... thnks

Hi Neldawalsh,

What is the error message?

Have you been able to connect to the internet before you run the scan?

For now you can follow the procedure as described below:

How to troubleshoot possible causes of Internet connection problems in Windows XP
http://support.Microsoft.com/kb/314095

Troubleshooting network connection problems

http://www.Microsoft.com/windowsxp/using/networking/maintain/troubleshoot.mspx

 

Reference link:

 

Internet Explorer is slow? 5 things to try

http://Windows.Microsoft.com/en-us/Windows/help/Internet-Explorer/slow-five-tips-to-boost-performance

Tips for solving problems when Internet Explorer hangs or stops working

http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-Internet-Explorer

Kind regards

Kiki

Tags: Windows

Similar Questions

  • My PC loses connection local and Internet after waking from sleep/hybernation.

    My PC loses connection local and Internet after wakes up from sleep/hybernation. The problem is solved by resetting the network card, but it is frustrating to have repeated resets every time the system in place to wake up. I am looking for a patch, I searched all the support sites and forums where there are similar problems that have been offered to different patches over time, but each of them has failed.

    Vista 64 SP2

    Hello

    Check the updated drivers for the NETWORK card and WiFi.

    Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
    version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
    Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    How to install a device driver in Vista Device Manager
    http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

    Download - SAVE - go where you put it - right click – RUN AS ADMIN.

    You can download several at once however restart after the installation of each of them.

    After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
    manufacturer of system become your backup policies).

    Repeat above for network card (NIC) and is a good time to get the other updated drivers Vista
    love the updated drivers.

    I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
    are almost always old, and you can search drivers manually as needed.

    How to disable automatic driver Installation in Windows Vista - drivers
    http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
    http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

    Also, check the power supply for the device management settings in device - double click Manager
    the device and the power management tab.

    ==============================================

    More if necessary:

    Check your settings (BIOS/CMOS) - usually F2 as you start - Wake on Lan, Wake on Modem and so on.

    Troubleshooting Windows Vista sleep and extended
    http://www.computerperformance.co.UK/Vista/vista_hibernate.htm

    How to troubleshoot performance problems with sleep, hibernation and resume in Windows Vista
    http://support.Microsoft.com/kb/950686

    May need to reset all to default power settings and then place back as you prefer.

    How to solve a problem of Mode for Vista and find a Solution
    http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.html

    How to enable and disable Hibernation - you can try to disable and re-enable the it. http://www.Vistax64.com/tutorials/165508-hibernation-enable-disable.html

    How to restore the default power in Vista (and then go back and change as you wish)
    http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.html

    Panel configuration-Device Manager - look at the settings for the network card, WiFi, Modem power management.
    and other devices. (Double click on the device and the power management tab)

    May need to reset all to default power settings and then place back as you prefer.

    I hope this helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • Unable to connect to wireless internet after Windows Vista update on 16/09/10

    Since I've updated windows I cannot access my wireless internet connection, however, I am still able to connect via the LAN port.

    If I check my ipconfig it says under the "media disconnected" wireless network connection  I tried to get my IP address into my settings because they seem to have disappeared, but I can't always wireless.  I ran all Windows diagnostic tools, but all say that the internet connection is fine (due to it being connected by the LAN port).

    I also tried to fix it by other solutions on this forum, that is

    • Open Set Up a Wireless Router or Access Point by clicking theStart button, clickingControl Panel, clicking network and Internet, and then clicknetwork and sharing Center. In the left pane, clickset up a connection or network, and thenset up an access point or wireless router.

    The result of the message is ' Windows has detected network hardware, but it cannot automatically configure "and when I try to manually configure the server requires a user name and password which I don't have.

    Please could shed you some light on this case for me?

    Thank you very much

    Hello

    I tried everything above without result.  However, I managed to reinstall my wireless router software after having repaired my DVD driver software.  I restarted my computer and Wireless does not work.  Reinstalled the software new and restarted the computer, and then after a short period of time the computer connected to wireless internet!  Not know not why the remedy has been delayed or why it did not work after the first attempt, but it connects wireless now - what I know is that this problem occurred after an update of Windows, it's a shame that Microsoft failed to address this problem as it was their update it as many other people have also claimed.

    A big thank you to everyone who offered advice.

  • Unable to connect to wireless internet after formatting the system.

    Original title: Mr

    Hi, please my dell Inspiron gives me a serious problem to connect to any wireless router, I can only use moderm to brose, I can't connect to any wireless network, this happened to me after that I have format the system but all other things work.

    Hello

    Thanks for posting your query on Microsoft Community forum.

    As you mentioned after formatting the system, you cannot connect to a wireless router, I recommend updating the firmware on your router and updates your wireless network adapter drivers, as there might be a chance that the wireless drivers are deleted.

    The majority of connection inside Windows 7 problems have been resolved by installing the latest driver for the wireless card with obtained from the manufacturer. Download and install the Windows 7 compatible drivers and check whether the problem is resolved.

    You can refer to the link provided below to update the drivers from the manufacturer's website.

    DELL drivers.

    If the problem persists, I suggest you try the below mentioned methods and see if it helps you to solve the problem.

    Method 1:

    First of all, I suggest you run Windows built-in network troubleshooting to get the problem automatically detected and corrected.

    See the article below to run the network troubleshooter utility.

    Using the troubleshooter from network in Windows 7.

    http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7#section_2


    Method 2:

    This problem can also be bound to the adapter, reset, update driver, disabling, re-activating, uninstall and reinstall network adapter can help.

    Follow the steps in the following article to troubleshoot network adapter.

    How can I troubleshoot network adapter?

    http://Windows.Microsoft.com/en-us/Windows/fix-network-adapter-problems#1TC=Windows-7

    See also: Wired and wireless network problems.

    http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win81tab1&V2H=win7tab4&V3H=winvistatab1&v4h=winxptab1

    Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

    Kind regards

  • HP Envy Notebook dv6: unable to connect to the proxy server

    I saw an error message "Unable to connect to the proxy server" when I try to connect to the internet via WIFI, even if the label shows who is connected to my home router.

    HR63 wrote:

    Thanks for the tip, there is so much information, the laptop with this problem belongs to my daughter and because she doesn't have an internet connection (can not download anything), there is another way to fix it?

    I don't know because the online is where most of the instructions are locate in. I copy and paste the links here, but unless you can print them out or print the online pages it becomes hard, but here are the parts of the txt of it. +

    http://malwaretips.com/blogs/unable-to-connect-to-the-proxy-server-removal/

    How to remove "Unable to connect to the proxy server" (Virus Removal Guide)

    This page is a comprehensive guide, which will remove "Unable to connect to the proxy server" virus from your computer and any other adware program that may have been installed during the installation process.
    Please complete all of the steps in the correct order. If you have any questions or doubts in any point, STOP and ask for our assistance.
    STEP 1: restore the default proxy to your machine settings
    STEP 2: remove failed to connect to the ad software proxy server from Internet Explorer, Firefox and Google Chrome with AdwCleaner
    STEP 3: delete impossible to connect to the proxy server with Junkware Removal Tool browser hijacker
    STEP 4: delete impossible to connect to the virus pop up server proxy with Malwarebytes Anti-Malware free
    STEP 5: check a second time for the "unable to connect to the proxy server" malware with HitmanPro
    (Optional) STEP 6: delete impossible to connect to the proxy server of Internet Explorer, Firefox and Google Chrome ads

    http://www.geckoandfly.com/9275/Internet-connection-error-unable-to-connect-to-the-proxy-server/

    It is with IE

    Step 1 - launch Internet Explorer

    Step 2 - Click the icon "but" it looks like a gear wheel...

    Step 3 - select 'Internet Options '.

    Step 4 - Select the 'connection '.

    Step 5 - Click Lan settings

    Step 6 - uncheck "use a proxy server for your LAN (these settings may not apply to dial-up or VPN connections)."

    Step 7 - click 'Ok' to save the changes

    If you are using a proxy server, check your proxy settings, or check with your network administrator to make sure that the proxy server is running. If you don't believe that you should use a proxy server. Here's a video tutorial:

    Also, if you can since I don't remember which browser your help that gave you this message that I had to go with IE as a default.

  • Internet - unable to connect to the proxy serer connection issues

    I have two problems, which could well be related.  Equipped with Vista.  Firefox running, all of a sudden a site using java wouldn't work.  I tried the automatic installation of Java, it has failed.  I tried the manual installation and said "Setup cannot continue with the current internet connection settings" (which is not one of the error messages shown on the help that is aimed at page).

    I decided to try to do it through IE.  It is not connect to the web at all (not Opera).  When I tried the link diagnose, I think once it says "unable to connect to the proxy server" well this time he said www.google.com is not set up to establish a connection on the port world wide web (http) service on this computer.

    Can you help me with, or ideally for both - if they are not conneccted - problem.  Thank you.

    Hello
    Let me assure you that I am on the same page here.
    1. you can get online via Firefox, but not with any other browser?
    What happens if you try to connect without a browser... just use the connection to connect before you open a browser?
    Was there anything added/removed before it began?
    Have you run an anti-virus and anti-malware scans?

    Also try:
    http://support.Microsoft.com/kb/937151
    http://Windows.Microsoft.com/en-us/Windows-Vista/change-proxy-settings-in-Internet-Explorer
    hope this helps,
    B Eddie

  • Unable to connect to the internet, NVIDIA nForce Networking Controller issues

    The NIC 'NVIDIA nForce Networking Controller' experiences driver or hardware problems... the message that I get when trying to connect to the internet.

    In under 'Network adapters' Device Manager double-click your network adapter, in the, click the tab drivers, click on the button 'Disable', properties when disabled, click 'enable '.

    You can also try the "Uninstall" button to uninstall. Then on the Action menu click on "Scan for hardware cahnges ' of the reinstall.

  • Satellite Pro A10 - WXP re-installed and unable to connect to the internet

    Please help me... I have re-installed Windows XP Home... and now unable to connect to the internet... have also not more of her!
    I went into the Device Manager... in 'other devices' - and it is yellow? mark beside...
    1 / ethernet controller. 2 / multimedia audio controller 3 / PCI modem controller 4 / video...
    They all say "drivers for it are not installed. .... Also, went to "system devices" and find 9 other things that no longer have the drivers installed... said there is also no "audio device" installed!

    My laptop is completely exhausted, or it is better to try to resolve this issue. I'm a fool when it comes to stuff like that... so be gentle with me... what I need to find all the individual drivers and re - install...? BTW... There is no wireless card in the back... (Already checked)...

    Would appreciate any help...
    Thank you

    Hello

    Satellite A10 is a little older model laptop and you can find the drivers in * archives *. go to the [page driver Toshiba | http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp]

    Archive-online Satellite Pro-online Satellite Pro A series-online Satellite Pro A10

    > / ethernet controller. 2 / multimedia audio controller 3 / PCI modem controller 4 / video

    Download and install: 1) Lan Card 4) graph of the card sound 2) 3) Modem driver download also, other drivers if necessary.

  • Unable to connect to the internet via ethernet.

    Unable to connect to the internet via ethernet.

    You have published a statement... is not an issue. You have a question?

    Do you mean that you try to use Ethernet for Internet connection? OR are you asking how to connect to Internet if Ethernet is not possible?

  • My computer connects to the wireless internet, but I am still unable to connect to internet even though it is always connected to the wireless connection.

    connection Wi - Fi

    My computer connects to the wireless internet, but I am still unable to connect to internet even though it is always connected to the wireless connection. How can I solve this problem and what could be the problem?

    Hello

    1 did you change your computer, after which the issue started?
    2. during how long have you had the problem?
    3. what web browser do you use?

    I recommend to update your network card drivers and check if that helps.
    http://support.Microsoft.com/kb/283658

    Let us know the status of the issue and also please answer these questions.

  • Setup is unable to connect to the Internet

    When I try to download and install programs on my desktop, I get an error message indicating that Setup is unable to connect to the internet. How to fix this?

    Hi NardoBailey,

    1. did you of recent changes on the computer?

    2 when was the last time it was working fine?

    3. What is the full error message that you receive?

    4. you receive the error message when you install any program on the computer?

    It is possible that some third-party programs installed on the computer is causing the problem.

    I suggest that you put the computer in a clean boot state and check if it helps.

    To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

    See the link below to learn more about how to clean boot.

    How to configure Windows XP to start in a "clean boot" State

    http://support.Microsoft.com/kb/310353

    Reset the computer to start as usual

    When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

    (a) click Start, type msconfig in the search box and press ENTER.

    (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

    (c) under the general tab, click the Normal startup option, and then click OK.

    (d) when you are prompted to restart the computer, click on restart.

    See the Microsoft article below and check if it helps.

    How to troubleshoot issues that may occur when you install, uninstall, or upgrade one program on a Windows computer

    http://support.Microsoft.com/kb/2438651

  • Unable to connect to the internet, in vista h.p.. /.

    Unable to connect to the net in vista h.p./tried reset cable motem [unplug and reconnect] / I tried to disable and re activate device Man. / Properties show peripheral works properly or not a cable/same question do you have a complete op sys. reinstall and tried previous tries again to EVERYTHING/IDEAS? The computer is an acer m1100 amd 64 x 2 4400 2.3 with a Maxwell Yukon pci - e Ethernet controller [using a wired connection]

    Hello

    That you get error messages when you tried to connect to the Internet?

    You may encounter network or problems of Internet in Windows for several reasons. Some common problems that can cause these problems are:

    • A wireless network adapter switch that is not enabled

    • WEP, WPA, or WPA2 key or password security issues

    • Cables that are not connected correctly

    • Corrupt or incompatible drivers

    • Missing updates

    • Network connection settings

    • Hardware or software problems

    You can run the troubleshooter and update network cards.

    Wireless and wired network problems
     
    Also see these articles for more information and to perform the steps.
     
    Network connection problems

    http://Windows.Microsoft.com/en-in/Windows-Vista/troubleshoot-network-connection-problems

    The problems of Internet connection

    http://Windows.Microsoft.com/en-in/Windows-Vista/troubleshoot-Internet-connection-problems

    Hope this information helps. Response with status so that we can help you.

  • Can connect to the server (although very slowly) but unable to connect to the internet

    Original title: network connectivity

    I have a user who has been connected to the internet through our SBS server.  All of a sudden, it can connect to the server (although very slowly) but unable to connect to the internet.  The network and sharing shows that it is connected to a public network not by the domain server.

    I hooked another computer for network wiring and it worked fine.  I changed the wiring, and it still doesn't work.

    Any ideas?

    Thank you

    This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)

    If you give us a link to the new thread we can point to some resources it
  • Unable to connect to the internet and have problems with the help of program network Toshiba

    Original title: I can't go on the internet?

    I try to go online to check my bank account and net work of toshiba program will not cone upward on my screen.i have a blank page.

    Hi Alice,.

     

    Please join Microsoft Community where you can find the necessary information on Microsoft products!

    You are unable to connect to internet and unable to use a Toshiba network program.

    1. what browser do you use?

    2 are you able to open other sites?

    3. Once you get a white page?

    4. do you get error messages when you try to open the site to the Bank?

    5 did you do changes on the computer before the show?

    6. who is the program of Toshiba network you're talking about?

    To work the issue with cannot connect to the internet:

    Method 1:

    See the site:

    The problems of Internet connection

    http://Windows.Microsoft.com/is-is/Windows-Vista/troubleshoot-Internet-connection-problems

    Note: Apart from using the Internet connectivity evaluation tool, all the other steps are applicable to Windows 7 as well.

    To work the issue with Toshiba program:

    Method 2:

     

    Reinstall the boot program:

    Step 1: Clean boot

    When the computer starts to boot, programs non-Microsoft will not be started and would avoid any interruption of their share.

     

    Check out the link:

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    http://support.Microsoft.com/kb/929135

    Note: once you are done with the boot, follow step 3 of section to set your computer to normal startup.

    Note: If in case, you are connected via a connection wireless, and then when you start the System Configuration utility to perform the clean boot, click Startup and Services tab one time and check wireless see corresponding section are checked (enabled).

    Step 2: Uninstall the program

     

    See the site:

    Uninstall or change a program

    http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

    Step 3: Install the program

     

    If the problem persists, then you try to get help on the Toshiba forums site:

    http://forums.Toshiba.com/

    I hope this helps. If the problem persists, let know us and we would be happy to help you.

     

     

     

  • Unable to connect to the internet after the removal of important processes in the task bar

    I am not very tech-savvy then let me explain.

    I have a laptop Lenovo I recently bought in August 2014.  A friend suggested that I have download the free application "Open Office" in line, so I could open a school power point.  Open Office gave me a handful of viruses, which I managed to delete, then having served the system well, panic I accidentally opened the Task Manager and deleted a bunch of processes that are running.

    Now, I find that, although I am connected to WiFi, I can't open Internet.  I click on Firefox, but it shows that I am unable to connect to the Internet.

    I have Windows 8; an easy way I can solve this problem?

    Thank you.

    Original title: I accidentally turned off the program that allows my computer to connect to the Internet

    Hi Tunasushiroll,

    Thanks for posting your query in Microsoft Community.

    I imagine the inconvenience that you are experiencing and will certainly help you in the right direction to solve the problem.

    The problem can occur for various reasons, including incorrect TCP/IP settings configured, firewalls third of anti-virus programs blocking the connection, or due to bad the advanced sharing settings. So, I would suggest trying the following methods and check if you system is able to detect the wireless network.

    Method 1:

    Run the troubleshooter network first, and then test your Internet connection.

    Open the Network Troubleshooter by hitting on any fly in the Dashboard screen, quilting Search(or if you use a mouse, pointing to the top right of the screen, move the mouse down and then clicking search), entering the network troubleshooterin the search box, type, or by clicking settingsand then by typing or clicking on identify and fix network problems.

    If the problem persists, try the following method.

    Method 2:

    Second of all, please check if the WLAN service is started and set to automatic. If it is stopped, then I suggest you to start the service and set it to automatic.

    1. Press the Windows key + R, type services.msc in the Run dialog box and press ENTER.
    2. Select the Autoconfiguration WLAN service in the list and double-click it.
    3. Change the startup to Automatic type, then click Start to start the service.
    4. Click apply and then click OK.
    5. Restart the computer and verify if the network is detected. If this is not the case, go to method 3.

    Method 3:

    Reset the DNS and TCP/IP settings.

    1. Press the Windows key + X, click prompt (Admin).
    2. Please enter the following commands and press ENTER after each one.

      netsh int ip reset resetlog.txt
      netsh winsock reset
      ipconfig/registerdns
      ipconfig/flushdns
      ipconfig/release

    3. Restart the computer to check the issue.

    Check if the system is able to detect the network. If this is not the case, go to method 4.

    Method 4:
    Temporarily disable the security software (if any), and check if it helps.

    Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

    Additional information:

    Windows wireless and wired network connection problems

    Hope this information is useful. Let us know if you need more help, we will be happy to help you.

Maybe you are looking for

  • How to fix unable to remove questionable certificates

    The use of preferences - advanced - encryption - view certificates - authorities - Delete or mistrust, I couldn't delete all certificates. After selecting a given certificate (ie. türktrust, wells fargo and many others are not any sense) and selectin

  • Size of the spindle of the Satellite C650 adapter

    Hi all I bought my PC toshiba laptop C650 almost 3 years back from Sweden. Its adapter has stopped working now.Currently I am in India and Bastien buy a new power adapter.Output voltage: 19VOutput current: 3.42 has. I have seen many adapters not expe

  • Problems of dll with Satellite A100-233

    My laptop A100-233 gives a message "the dll system uses 32 dll has been moved in memory." This application may not work properly, the vendor must be contacted for a new dll." This probably occurred after defragmentation, but I did not detect any defe

  • HP Pavilion g series X 16-96084: in need of drivers for HP Pavilion g6 X 16-96084

    Please can someone help?  I did a new install of windows 7-64 bit on a laptop HP Pavilion g6 and don't have the drivers in the system or the recovery disc.  I cannot connect to the internet to find the drivers now (write this from another computer) a

  • Discover the IP in a thong

    I am facing a problem to find the IP address in a string that contains the other string as items... such as letters and numbers and... (ok, I'm just messing around).  in any case, the string might resemble the following "10.0.0.1 stuff, stuff, stuff