Connection of Internet Time Capsule airport

Similar Questions

• Hard, my time capsule airport is connected to my network. I also use it as my Wi - Fi. The time capsule disconnects from the network periodically and does not restore I have to restart to reconnect. What problem I have

  Hard, my time capsule airport is connected to my network. I also use it as my Wi - Fi and the backup. He constantly falls the internet connection and I have to restart the so he can reconnect. What problem I have?

  What brand and model of your Internet modem you have the Capsule Time (TC) by Ethernet? What exact model of the TC do you have? ... and who is your ISP?

• Time Capsule airport 10057 error: computer recognizes airport exists but cannot connect

  Hello everyone. I am currently unable to access the NAC on my Time Capsule Airport (not HQ one), as my password seems incorrect. However, this issue of mix, I am unable to connect using AirPort Utility at the Time Capsule airport in order to use a "soft reset". I can't push the button, but after that, it is impossible to actually access the settings from the airport using the utility.

  I'm on Windows 8, using the AirPort Utility for Windows 8.

  I tried the following:

  • every possible permutation of IPv4/6
  • a_l'_aide_de CTRL + SHIFT + O, and then perform one) I don't have the password and b) if I type in gibberish it gives me another error (-6753)
  • disconnect, reconnect, reboot, etc, etc.

  Just to be clear:

  • I know that the WIFI password
  • I know the old password to the NAC
  • I do not know how to change the password of the NAC
  • My shift caps lock is not on

  After a soft reset of the password is public... What have you tried?

  There is no password on the wireless for 5 minutes during the soft reset.

  In any case to fix... doing a factory reset full. No files are lost in the process.

  Start from a factory reset. No files are lost on the drive hard in doing so.

  Universal factory reset

  Turning off the TC... That is, remove the power supply cord or the power at the wall outlet, wait 10 seconds... Hold the reset button... be nice... Turn on always even now in reset... and keep holding in for another 10 seconds. You may need assistance because it is difficult to hold in reset and power on. It will show the success quickly flashing led front. Release reset... and wait a few minutes for the TC to reset and return with the factory settings. If the front LED flashes quickly you missed and simply try again. The reset is quite fragile in these... Press the key while it is just click away and not more... I've seen people bend lever or even break. I use a toothpick as a tool.

  NB. None of your files on the hard drive of the TC are removed... This simply clears the settings of the router of the TC.

  Make sure you use ethernet to connect to the TC, not wireless. It tends to work better that windows wireless Gets a bit NARKY...

  If you don't know what that means NARKY... and I don't know what means NAC.

• time capsule airport cannot be opened because the original item cannot be found

  I just purchased a Time capsule airport and can't install. It flashes orange, and although that Time Machine backs up on it, and I can access the internet, I don't remember upward the back-up because I got the following error message:

  "'Airport Time Capsule' could not open the original item cannot be found".

  The printer is connected to the Capsule by USB works.

  I'm installing via an iMac.

  Help, please!

  Thank you

  You first need to determine what is at stake that indicates the LED "blinking orange.

  To make your iMac:

  • Run the AirPort Utility.
  • Select the Time Capsule
  • In the pop-up window, all questions will appear in the status section.

  Please post back your findings.

• Using Time Capsule airport on 2 devices

  for some reason, I have a PET of brain here and do not understand this.

  My wife has a laptop computer macpro she does his grad school stuff on.   I have an iMac.   I also have the time capsules from the airport.  the woman is set up with time machine, it sends data via wifi to the time capsule. It is very good.  The mine records at the same Time capsule airport wireless.

  ME, I would use one different wifi router other than the airport on another network device I have, however, the question is: is it possible that I can keep the wifi for the operation of the Apple device and connect my computer via ethernet to the device for the back upward only, using the capsule on the imac.

  I think I can, but I don't want to screw up the wireless network.

  You can use both ethernet and wireless at the same time... but it becomes complicated with the gateway router and DNS values.

  Secondary wireless router should use another address LAN IP for the TC, so you can separate the two networks.

  This could lead to further questions about the network although because you must plug a router into the other I presume... unless you are completely isolate the TC from the internet or if you have in fact two internet connections.

  Give me the real details.

  What is the second router and IP is running?

  How is the installation of TC and what IP is running?

  Screenshots that make it easier.

  I did a write up with screenshots here, which will give you the basics.

  Time Capsule using wired for Mac for backup only.

• How to restore all the data stored on my Time Capsule airport to my new iPAD Pro

  I have a Macbook air with a backup at a time Capsule from the airport.  The MacBook Air is dead (blue screen).  Now, I have a new iPad Pro and want to restore all the photos that have been saved on the Time Capsule airport to my iPad.  How can I do this?

  Connect the iPad Pro to your computer and sync photos to the iPad Pro.

• Time Capsule airport problems

  I have several questions, setting up a home network, but I want to start with the problems I have with the time Capsule.

  Until 2 days ago, the time Capsule was working fine.  My setup is the ISP router connected to the Capsule of time and the Time Capsule hard connections on a USB for extra storage and ethernet to an iMac.  Also several peripherals wifi like the pads and phones.  No problems.

  This past weekend, I started to set up a home network by adding an ethernet (TP Link TL SG108E) switch to one of the ports ethernet on the Time Capsule.  Of the switch, I have then several ports around the House (recently redone to include an Ethernet cat. 5) connected now to two Apple TV and a security system at home.  No other device is currently connected to the ports and all connected devices work without any problem.

  The time capsule.  In the past 24 hours, the time Capsule disappeared from Airport utility.  I can see the wireless signal and connect to it.  I use the time for constant Time Machine backups Capsule and continue without any problem.  I can see the Capsule in the Finder, can connect you and the USB that I have connected to the time Capsule, but no time Capsule in the utility.

  My future plan must use two of the ports around the House with Airport Express devices to expand the WIFI, but as I can't see Time Capsule in the utility and I can't install Express devices.  However I tried to put in place one of the Airport Express devices and the process has begun to extend the Time Capsule network, but then I got a message "unexpected error".  So, first thing first, problem of Time Capsule.

  Any ideas?

  Let's first, as you note.

  Your message did not mention if you had done a full Cycle of power network. If you have not already done so, it would be a good fundamental mission of troubleshooting to be performed, because he will give everything a new departure and will often solve a problem similar to what you experience. To do this...

  • Power off all the devices on your network... modem, computers, printers, accessories, mobile devices, etc. in any order you want.
  • Wait a few seconds
  • Turn on the modem and let it run only for 2 to 3 minutes or more if you want
  • Then, switch on the device connected to the modem and leaves turn a good minute
  • Keep power devices one at a time about a minute out until the entire network is back
  • Check the network

  Please report your results

• INSTALLATION OF TIME CAPSULE AIRPORT

  THE CAPSULE FROM THE AIRPORT CAN BE PLUGGED INTO A ROUTER/MODEM BOX OF COMBINATION OR WHAT I HAVE SEPARATED THE ROUTER AND MODEM?

  You can connect the modem/router combination in your Time Capsule airport

• How can I change the name of the ion HD my Time Capsule airport

  My time capsule airport has changed its name to data and now I can't use it. What can I do?

  Not sure why you can't use 'Data' as the name of the disk hard Time Capsule, since it is the default value.

  But, if you want to change the name of 'Data' to something else...

  Open the AirPort on your Mac utility... (Finder > Applications > utilities > AirPort Utility)

  Click on the image of the time Capsule

  Click on edit in the window that appears

  Click the disks at the top of the next window

  Next to Partitions, you will see "Data".

  Click directly on the name of 'Data' and the box will change to allow you to edit the name, just as you can change the name of any other player

  In the example below, I changed the name of the drive 'safeguards '.

  Click Update at the bottom right of the window to save the changes you have made

  

• My MacBook is not connect to my Time Capsule to back up.  IMac my wife backup fine and our wifi works, but when I try to save, I get a message telling me to connect to the T. C. when it is available, which is never.  Help

  My MacBook Pro is not connect to my Time Capsule so it backs up.  IMac my wife backup fine and our wifi works, but when I try to save, I get a message telling me to connect to the T. C. when it is available, which is never.

  The problem started when I upgraded to Yosemite, sometimes back.  I am running 10.10.5.

  The MacBook Pro...

  Click the 'clock' Time machine at the top of the screen of the Mac

  Click Open Time Machine Preferences

  Click Add or remove from your drive

  Under the heading of backup disks, click on the drive it to highlight (probably named 'Data', unless you have changed the name of the drive)

  Click remove disk

  Close the windows

  Restart the MacBook Pro

  Click the 'clock' Time machine at the top of the screen of the Mac

  Click Open Time Machine Preferences

  Click select drive or Add or remove disks

  Choose the Time Capsule drive (probably named 'Data') by highlighting

  Click use the disk

  Close the windows

  Wait a while to see if a backup is performed

  If you want to manually run the backup, click on the Time Machine clock icon, and then click Backup now

  Report on your results. If the backup still does not work, we need the exact message that you see there.

• How to see files saved on my Time Capsule airport? All I see is the name of my hardrive.

  I have recently started using Apple's Time Capsule airport and use it for my Time Machine backups. When I used Time machine in the post with an external hard drive, I can go and see all the backups and individual files, if I needed to. However, with my new Time Capsule airport, I don't see the name of my hard drive. Is there a setting someone to reveal all the files and individual backups?

  If you want to see the files Time Machine has saved on your Mac...

  Click the 'clock' Time machine at the top of the screen of the Mac

  Click on enter Time Machine

  For more information about Time Machine, see this Apple support document: use Time Machine to back up or restore your Mac - Apple supported

  However, if you are asking how to see the files that Time Machine has saved time using the Finder Capsule...

  Click on the Time Capsule icon under the heading Shared in a Finder window

  A disc hard... named 'Data' unless you have changed the name... is displayed on the right

  Double click 'Data' (may asked you the peripheral Time Capsule password when you do this)

  Double-click the sparsebundle bearing the name of your Mac

  A reader named Time Machine backups will appear on the desktop

  Open the drive and go through the levels to find the files you want

• I have a new time capsule airport. How to limit the search for who can use the time capsule backup process?

  I have a new time capsule airport. How to limit the search for who can use the time capsule backup process?

  Set a password to disk... disk tab in the utility... and just give to those you want to use the TC...

• Sounds of Time Capsule airport

  My Time Capsule airport is make screaming noises. Is this an indication that the drive should be replaced?

  Is - it stop shouting when the disc turns down?

  It can also be the power supply... but they tend to complain rather than shouting.

  What model is the most convenient airport? How old?

• I'm unable to connect a Canon wireless printer to my Time Capsule / Airport utility

  Looking for advice on how to connect to a Canon wireless printer to my wireless (Time Capsule).  Airport utility does not see an option to add a WiFi printer.

  If you are referring to the method of adding a printer WPS...

  Open AirPort Utility

  Click on the image of the time Capsule

  Click the Edit button in the window that appears

  Click on the menu of The Base Station ... up where you see the icon Apple, file, window, help and other menus at the top of the computer screen top

  Click Add a WPS printer

  

  There are two methods available... . First of all try (which is identical to a button press the Time Capsule) and PIN, using a code. Choosing the right method according to the instructions provided in the installation Guide for your printer.

• How to share a Time Capsule airport directory (/ Data / media /) with an OPPO BDP - 103 Blu - Ray player with Ethernet (no Wi - Fi) connections?

  I have an OPPO BDP - 103 Blu - Ray player connected to my LAN via ethernet cable.  I also have an airport Time Capsule (APTC) connected by ethernet to my local network cable.

  In addition to the use of PACT as a backup Time Machine for my MacBook, I have a few movies and photos in the directory/data/media /.  What should I do so that the law of the APTC as a media server to serve/data/Media/and the files in the hierarchy of files in this directory to the BDP-103?  I don't have a wireless adapter for the BDP-103.

  Note that I use OS X El Capitan on my MacBook Pro, but I don't want to get involved them in this.  I want to just serve you directly the files on CLTS CLTS.

  You can't do it unless the Blu - Ray player is a complete multimedia player.

  Apple have no extension of media in a TC... No... nothing... zero... Nothingness... elodie... not a thing.

  BTW, Apple do not support DLNA who need of most TV/media players... so they never get to add it in the future either.

  To play media files on a TC you can use a WD TV live... because it's a media player... and he can read raw files... not only DLNA used media.

  What Apple is nothing without iTunes.