Connection simplified a must in public places

Similar Questions

• Whenever I use my iPhone attaches to internet connection, in the window 'Connections available to the general public', my iPhone is presented as "iPhone 1" the next time that I used it, «iPhone 2 "then 3 then 4 etc.»»

  attaches to the iPhone

  Whenever I use my iPhone attaches to internet connection, in the window 'Connections available to the general public', my iPhone is presented as "iPhone 1" the next time that I used it, «iPhone 2 "then 3 then 4 etc.»»  Currently up to 9. How can I stop this from happening? Or is it still important?

  Hello StevenHuurman

  Try this.

  1. turn on WiFi tethering via the iPhone.

  2 connect the system to the iPhone tethered via the wireless connection.

  3. without closing the iPhone tethering, disconnect the straps of the iPhone system.

  4. now reconnect the system to the loin and Note If the wireless connect denominator increases.

  For the above steps, if you have access to other computers, then try the same steps and allow to know the results of these institutions.

  If the denominator goes up so we know it is a problem with the system and if not then whenever you turn off modem, then again on the iPhone are considered as a new network connection and something has changed in the phone.

  Another thing, you have selected the option for the system to connect automatically when this network is in range?

  Unfortunately I do not know what version of the OS you have here are the steps for Windows Vista and Windows 7. During the installation process for Windows Vista and Windows 7, you will see the option "connect automatically when this network is in range. Make sure that you click this box when you configure the connection to the loin.

  Let me know the results. Thank you.

• Cannot connect my laptop to the public domain as of the libraries network

  Hello

  I use window 8.1 on my laptop and am not able to connect my laptop to the public domain for example of the library's wireless network. I have wasted so many hours to fix the same problem.

  I even updated my window to 8.1 pro, but I still have the same problem.

  Please can you me the solution for the same so I can connect my laptop to the public domain as a library?

  Thank you

  You do not have we given error codes, or what you have tried, or where he fails in the process. You do not have also told us what kind of computer you have.

• Why can't connect Internet to Macdonalds or other places public wifi? I have no trouble sometimes "borrowing" wifi unsecured neighbor.

  I use a netbook with Windows 7. That this has something to do with a firewall?

  Well this morning I went to two Macdonalds and two parks with public wifi. And like all people whose car noise stop when they get to the mechanic, I had no problem online. Did nothing different than the last two months. So I must conclude that go public with such a basic problem was all that was needed - a bit like a confession. Thanks for both answers.

• Updates of player on Mac to State, she must have the internet connection, but my Safari is in place and works very well. What should do?

  I have the reader on Mac OS 10.10.2 9.5.5 and frequently get notifications of updated to Adobe in my dock, accompanied by a warning sign indicating an internet connection is necessary, but I have my place Safari browser and works well. So I can never get the update beyond that point. This happens regularly and I wrote Adobe and never received a response. Adobe should make the updates one file without welding, almost automatically, but instead, they are still using archaic software that is confused (unless you are a computer scientist) and difficult to solve. Adobe could do much better.

  Your Reader version 9.5.5 is very old and is no longer supported.

  I suggest that you uninstall, then install the latest version using the Installer http://get.adobe.com/reader/enterprise/ offline

• Second laptop unable to connect; When trying to connect wirelessly, says connection is successful, but the Public unidentified network, no Internet.

  Hi all.

  I'm really sorry to post this question, I must have read 100 other threads on this topic, but none of the solutions seem to work for me.

  I have a home set wireless network in place, which may not have a lot of problems with it that I have a laptop W7 which has a perfect wireless connection, and also our TV connect when you want, as do our phones and Xbox.

  We bought a second hand Acer aspire laptop for our daughter. It is running Vista Edition family Basic. Even if she had the factory reset done on this, because we can connect to the router with an ethernet cable and it works very well, we managed to ensure that all updates of Windows etc are all complete.

  When trying to connect wirelessly, it says connection successful, but it is to a Public unidentified network, and there is no Internet. Also, even if it says Local access, we cannot connect to the router settings page is.

  I have uninstalled and reinstalled the built-in wireless adapter and updated the driver to do this, he says that he is as up-to-date as possible.

  I checked that DHCP is enabled, we tried dynamic and static IP addresses, we have disabled and re ipv6 enabled, we used the command prompt to reset winsock and stack ip, I looked into msconfig services for service # Id_String1.6844f930_1628_4223_b5cc_5bb94b879762 # Apple off but it isn't here.

  I have a real dislike for Norton / products McAfee and there is none of these on the laptop. We will install Comodo Internet Security, Eusing Registry Cleaner, Spybot S & D and Spyware Blaster as soon as the wireless is configured and that the Windows Firewall is disabled.

  We also have many turns of the spin off the coast and laptops, etc. and deactivation and activation of the adapter.

  It seems that all the usual solutions for the lack of connection are not the culprits this time.

  IPconfig for W7 laptop that works well is:

  Microsoft Windows [Version 6.1.7601]
  Copyright (c) 2009 Microsoft Corporation. All rights reserved.

  C:\Users\Adrian>ipconfig/all

  Windows IP configuration

  Name of the host...: Adrian-laptop
  Primary Dns suffix...:
  Node... type: hybrid
  Active... IP routing: No.
  Active... proxy WINS: No.

  Wireless Network Connection 2 wireless LAN adapter:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Microsoft Virtual WiFi Miniport adapt
  Physical address.... : 78-E4-00-D1-5F-6A
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes

  Wireless network connection Wireless LAN adapter:

  The connection-specific DNS suffix. :
  ... Description: Broadcom 4313 802.11b/g/n
  Physical address.... : 78-E4-00-D1-5F-6A
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes
  Address IPv6 local link...: fe80::30fd:c01f:ab28:fbf9% 13 (Preferred)
  IPv4 address: 192.168.1.3 (Preferred)
  ... Subnet mask: 255.255.255.0.
  Lease obtained...: 13 August 2012 09:16:54
  End of the lease...: August 14, 2012 09:56:23
  ... Default gateway. : 192.168.1.1.
  DHCP server...: 192.168.1.1.
  DHCPv6 IOOKING...: 360244224
  DHCPv6 DUID customer...: 00-01-00-01-13-B2-5C-FD-90-FB-A6-A5-8F-73

  DNS servers...: 192.168.1.1.
  192.168.1.1
  NetBIOS over TCP/IP...: enabled

  Tunnel adapter isatap. {09285A7E-7837-4D7B-994D-C70130D43958}:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Microsoft ISATAP adapter
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Card adapt 6TO4 tunnel:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Microsoft 6to4 card
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Card tunnel Local Area Connection * 15:

  The connection-specific DNS suffix. :
  ... Description: Teredo Tunneling Pseudo-Interface
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes
  IPv6 address: 2001:0:5ef5:73 b 8: 8ed:720:a3fa:1e53 (Prefer
  Red)
  Address IPv6 local link...: fe80::8ed:720:a3fa:1e53% 24 (Preferred)
  ... Default gateway. : ::
  NetBIOS over TCP/IP...: disabled

  Reusable Microsoft 6To4 tunnel map:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Microsoft 6to4 adapt #2
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Card tunnel Local Area Connection * 11:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Microsoft 6to4 adapt #3
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  IPconfig for the Vista laptop that works wired but not when it's wireless is:

  Microsoft Windows [Version 6.0.6000]
  Copyright (c) 2006 Microsoft Corporation. All rights reserved.

  C:\Users\Adin>ipconfig/all

  Windows IP configuration

  Name of the host...: Georges-PC
  Primary Dns suffix...:
  Node... type: hybrid
  Active... IP routing: No.
  Active... proxy WINS: No.

  Wireless network connection Wireless LAN adapter:

  The connection-specific DNS suffix. :
  ... Description: Atheros AR5007EG Wireless Network adapt

  Physical address.... : 00-1D-D9-1B-71-69
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes
  Address IPv6 local link...: fe80::78c1:cedd:291c:e44b % 11 (Preferred)
  IPv4 address: 192.168.1.2 (Preferred)
  ... Subnet mask: 255.255.255.0.
  Lease obtained...: August 13, 2012 11:28:16
  End of the lease...: August 14, 2012 11:28:16
  ... Default gateway. : 192.168.1.1.
  DHCP server...: 192.168.1.1.
  DHCPv6 IOOKING...: 151002585
  DNS servers...: 192.168.1.1.
  192.168.1.1
  NetBIOS over TCP/IP...: enabled

  Ethernet connection to the Local network card:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Broadcom NetLink (TM) fast Ethernet
  Physical address.... : 00-1B-38-5C-28-24
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes

  Card tunnel Local Area Connection * 6:

  The connection-specific DNS suffix. :
  ... Description: isatap. {E409704E-A039 - 41A 8 - BEB9 - 614B6A018}
  493}
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes
  Address IPv6 local link...: fe80::5efe:192.168.1.2%12(Preferred)
  ... Default gateway. :
  DNS servers...: 192.168.1.1.
  192.168.1.1
  NetBIOS over TCP/IP...: disabled

  Card tunnel Local Area Connection * 7:

  The connection-specific DNS suffix. :
  ... Description: isatap. {CC1DD067-8D6C-4BDE-BCC8 - 13921 941
  532}
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes
  ... Default gateway. :
  NetBIOS over TCP/IP...: disabled

  Card tunnel Local Area Connection * 9:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Teredo Tunneling Pseudo-Interface
  Physical address.... : 02-00-54-55-4E-01
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Any help or advice will be most appreciated thanks

  Norton or McAfee pre-mstalled of recovery of the manufacturer media?

  If so, did you uninstall it AND run the tool to remove the appropriate product manufacturer?

  Download the Norton removal by https://www-secure.symantec.com/norton-support/jsp/help-solutions.jsp?lg=english&ct=united+states&docid=20080710133834EN&product=home&version=1&pvid=f-home

  Close all other programs, and then run the tool. When it is complete, reboot the machine if she wants it or not.

  Download the removal of McAfee Development tool from:

  http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe

  Click on save and save the file to a folder on your computer.

  Navigate to the folder where you saved the file.

  Right-click MCPR.exe and select "Run as Administrator" to run the removal tool.

  When you're finished, restart.

• CAN´t connect 6 s to some public wifi hotspot that requires authentication

  I can´t connect my iphone 6 in some public hotspots that require password authentication. Oddly enough, I get a page from apple.com instead of the hotspot authentication page. I do can connect my 5s company´s at the same time and same hotspot with no problems. I did the Reset Network Setttings from the 6s, but has not solved the problem.

  Try the procedure described in this article from Apple:

  If your iPhone, iPad or iPod touch connects to a Wi - Fi - Apple Support network

• Cisco AnyConnect VPN connection has not changed my public IP address on Windows 7 64 bit

  Hello

  I installed a customer Cisco AnyConnect VPN from my school, so that I can access school of my Windows 7 laptop at home network. I was able to connect, but when I used http://www.whatismyip.com/, it still shows the IP address assigned by my ISP.  The "network and sharing Center", I have my original LAN and LAN VPN upward but access to LAN VPN type is 'without Internet access. The VPN connection seems to have activities based on evolution bytes sent and received.

  I searched the Web for solutions and changed something like adding the entry door. But it did not help.

  Thanks for your help.

  Split tunnel is probably configured so that traffic destined to school networks pass through the VPN tunnel, and traffic destined to the Internet goes outward through your local ISP. That's why whatismyip show your public IP address from ISP.

• Time Capsule connected via Ethernet and put in place as an extension to my Airport Extreme Base Station wireless.  'Disc' Time Machine use?

  If my Time Capsule is connected by ethernet to my Mac, Time Machine uses this connection or the wireless connection?

  It depends on the order of connection of your Mac. If your Mac has been defined first connect using Ethernet if an Ethernet connection is present, then the Mac will save over Ethernet, even if the WiFi is enabled on the Mac.

  However, if your Mac has WiFi to connect first and WiFi is on... then the Mac connects using WiFi, even if an Ethernet connection exists.

  To see the binding command or service so that your Mac is using...

  Open the preferences system (gear on the dock icon)

  Open network

  Click on the gear at the bottom of the list of connection icon

  Click the Set Service command

  If you want to make sure that your Mac will always connect to Ethernet first, even if WiFi is turned on... then you want to make sure that Ethernet appears at the top of the service order.  If this isn't the case, drag it to the top. Click OK, and then click apply at the bottom right of the window.

  Another simple method to ensure that the backups will be produce by Ethernet is simply disable WiFi on Mac and let up to that you unplug the Ethernet cable, date at which you would be back on WiFi

• why it is impossible to connect to iCloud while putting in place the 5s

  I'll put up my 5s, but could not connect with apple on the phone ID, but can connect macbook. Please, anyone, no idea why this is happening

  Neil wrote:

  I'll put up my 5s, but could not connect with apple on the phone ID, but can connect macbook. Please, anyone, no idea why this is happening

  Why could not connect? What happens when you try? Are you an error? If Yes, what is the exact text of the error.

• at the end of my download of Word it says I have no internet connection, but I must have a being on this

  I have downloaded Microsoft word student trial and after I save it I run and it is when he told me that I lost my internet connection, but I don't think that I have lost

  Hello DioneStephens,

  What web browser are you using to try to download the trial of Word?
  You receive error messages when the download stops?
  I would say running the Microsoft FixIt tool is located in this article:
  http://support.Microsoft.com/kb/331796
  Try also try to clean boot your system by following the instructions in the article, to see if any software installed and running prevents the download ended.

• No connection wireless or in My Network Places or the system tray. Help!

  I had a wireless network icon in the system tray and my network earlier connections. I replaced my with a different user account (I deleted the previous). After the opening of the new account, there was no icon on the system tray wireless network, or in the my network connections. I tried setting up of wireless connections, but that does not work either. I use WINDOWS XP. What should I do? It could be a problem of drivers not installed. If so, please tell me where to download them (just send me the link). Tell me what to do in Windows XP.

  Problem solved by myself. Thank you.

• Network connectivity problem, it must be disconnected at random

  Original title: connectivity problem

  connectivity problem: under troubleshooting is said: problem with nearby connections... the computer disconnects Internet after 45-60 minutes - it closes down also, usually when I repair as administrator, I can connect to internet, but still a time when left almost an hour without using the internet disconnects?

  Hi Kvhan,

  1. are you using cable or wireless network?

  2 have you made changes on the computer before this problem?

  This problem can occur because of network settings, try the following methods and check if it helps.

  Method 1:

  Run the network troubleshooter utility.

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  Method 2:

  This problem can occur if authentication enable IEEE 802. 1 X for this network checkbox is enabled. If this box is checked, but there is no server to authenticate the connection is interrupted. If you turn on the wireless network connection, it disconnects again after a short period.

  To disable authentication IEEE 802. 1 X, follow these steps:

  a. Click Start, type ncpa.cpl, and then press ENTER.

  b. right click on your wireless network connection, then click Properties.

  c. click the wireless networks tab.

  d. under preferred networks, click your wireless network, and then click Properties.

  e. click on the Authentication tab, click to clear the authentication enable IEEE 802. 1 X for this network check box and then click OK twice.

  Reference:

  Problems in Windows wireless and wired network connection: http://windows.microsoft.com/en-US/windows/help/wired-and-wireless-network-connection-problems-in-windows

• Can only connect to wireless technology in some places far from the router

  My laptop, a Samsung with Windows 7, only connects to the internet in my room by the window.  The router is located in another room, but it doesn't connect when I am near him.  It shows that I am connected to the network, but I can't connect.

  Hello

  1. What's happening while you're trying to connect?

  2. you get any error message? If Yes, what is the full error message?

  Please follow the steps below and we update with the results.

  Method 1: Run the network troubleshooter, and check.

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  Method 2:

  Follow the steps in the following article and check.

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  For more information, please see the links and check if it helps.

  Why the my wireless signal strength is so low?

  http://Windows.Microsoft.com/is-is/Windows7/why-is-my-wireless-signal-strength-so-low

  Troubleshoot low wireless signal quality (applies to Windows 7 as well)

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-low-wireless-signal-quality-problems

  10 tips to help improve your wireless network

  http://www.Microsoft.com/athome/Setup/wirelesstips.aspx#fBid=hq7zl63PiZ9

   

  Why can't I connect to the Internet?

  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet

  Let us know if it helps!

• How to set up a windows 7 PC in a public place like a library to protect your pc

  I need to install a bunch of PC in a library. The library has had a history of people, alteration of the system making it unusable. Also put inappropriate screensavers, unwanted software installation, download of incorrect information.

  How can I configure Windows 7 to make a clean system and prevent tampering?

  Microsoft has a solution for what they gave up called stationary state. Here are some alternatives to locking systems.

  State of equilibrium for Windows 7

  SteadyState Alternatives for Windows 7

  Orientation:

  Windows SteadyState 7 simplified solution! -Infrastructure ...

  Establishing a steady state by using Microsoft Technologies

  DOWNLOAD: Creating a State of equilibrium using the Technologies Microsoft ...