Connection to a printer Laser HP old with a laptop

Similar Questions

• error message ' Add printer. Connect to the printer. Windows cannot connect to the printer. Operation failed with error 0x0000007e"___Any ideas?

  trying to access a lexmark printer installed on xp based computer from a laptop running windows7 via a local network.  Although the network is configured correctly, when I run the Windows printer installation I get an error message ' Add printer.  Connect to the printer.  Windows cannot connect to the printer. Operation failed with error 0x0000007e"I just upgraded to Vista by using the upgrade Acer and had the problems that Windows tried to download the drivers from Lexmark-, but could not. [the same lexmark printer and the configuration worked without any problems before the upgrade on this combination of machines running vista and xp].

  I had a similar problem when I tried to connect to an hp printer that used a Vista driver. Could do this test? Download Windows 7 driver from Lexmark, install it, and then try to connect to the printer again. Andre Da Costa http://adacosta.spaces.live.com http://www.activewin.com

• "Unable to connect to the printer. Operation failed with error 0 x 00000866", setting up a network printer

  Title of the Moose: error 0 x 00000866

  I have a laptop with windows 7 Professional.

  When I try to install a network printer I always get the message "cannot connect to the printer. Operation failed with error 0 x 00000866.

  What can I do to fix this

  Hi ETPM.

  You can try the following steps and check if it helps.

  Method 1:

  You can try to start troubleshooting printer and check.

  Check out the link:

  Open the printer Troubleshooter:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Method 2:

  Error message when you try to install a network printer on a Windows Vista-based computer: "Windows cannot connect to the printer operation cannot complete (error 0x0000000d).

  http://support.Microsoft.com/kb/947236

  Note: You can read this article and try to proceed as for Windows 7 also.

  Important: Serious problems might occur if you modify the registry incorrectly. Therefore, make sure that you follow the steps in the link mentioned above carefully. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  For more information about how to back up and restore the registry, follow the steps from the link below:

  http://Windows.Microsoft.com/en-us/windows7Back-up-the-registry

  Method 3:

  If the fix above is unable to get the printer working on your client machine to vista, so I suggest to follow the steps mentioned by Afzal Taher as of Friday, December 18, 2009 02:00.

  http://social.answers.Microsoft.com/forums/en/w7network/thread/954c4b9d-2F4C-4b1b-8fb6-49204ed96dfc

  Also check out the link:

  Install a printer:

  http://Windows.Microsoft.com/en-us/Windows7/install-a-printer

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• I can't connect my Bluetooth headset Nokia BH-111 with my laptop ASUS X501CA (using BT 4.0). Help, please!

  I can't connect my Bluetooth headset Nokia BH-111 with my laptop ASUS X501CA (using BT 4.0). I tried to add to the device several times in the Panel, but the PC still not able to find the helmet.

  Hello

  1. are you able to connect other devices bluetooth on your laptop?

  2. are you able to connect Nokia BH-111 on other PCs?

  I suggest you follow these items and check if it helps.
  Why Windows is not find my device?

  http://Windows.Microsoft.com/en-us/Windows-8/why-isn ' t-windows-conclusion-device

  If the problem is only specific to Nokia BH-111, you can also check with Nokia supported

  Let us know if it helps.

• HP Color Laser Printer 4 p: What cable do I connect my HP printer laser 4 p to my home network router

  Should what cable I plug my HP laser printer 4 p to the USB port on the router for my home network. My printer is already connected to my desktop running Windows XP.

  You cannot use usb period.  I said that above.  You will need to the jetdirect 300 x or another external jet parallel to connect to your router using an ethernet cable.  Once logged in simply look for instructions on the net print a configuration page and the use of the information in the config page to add the printer.  You can ask a friend who is computer savy.

• HP Deskjet D1560 printer does not work with this laptop with windows7 Home premium

  My printer works with windows vists computer but it does not work when connected to my laptop which runs on windows 7 Home Edition premium, can any body help on this please?

  You are supposed to install the HP full feature software / driver, specific to your version of bit of victory, before connecting the printer

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4062&LC=en&cc=UK&DLC=en&sw_lang=&product=3374275#n191

• Wireless printer does not work with the laptop running Windows 7

  Running Windows 7 on my HP laptop.  Have HP Photosmart all in one and scheduled to run through the Setup program on the printer wireless.  When I print a doc goes to the printer IT does not print on paper.  Find CD for printer.  It is not compatible with Win 7 then went to HP & downloaded driver.  Still can not get kicked out of the doc.  What to do next?

  The following Support HP for the Photosmart Wireless all-in-One deals with the issues where there is no response from the printer: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02205477&tmp_task=solveCategory&cc=us&dlc=en&lang=en&lc=en&product=4022343
  They also have diagnostic utilities that can help: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03291586&cc=us&dlc=en&lang=en&lc=en&product=4022343

  and the additional support: http://h10025.www1.hp.com/ewfrf/wc/product?cc=us&dlc=en&lang=en&lc=en&product=4022343&

• Windows 7 and HP LaserJet 5 p - old printer printer does not work with this new computer

  Just bought new PC and it has Windows 7.  Old HP LaserJet 5 p printer has always worked with last PC (XP).  This printer uses the parallel so purchased and plugged port with a parallel to USB printer cable.  Thought everything was cool when it seemed that the printer was recognized as "new device" but would not print my Word document.  Review of the Panel's PC recognized some other strange printer, so it has been deleted and I used the troubleshooter to find and download the old printer driver.  PC now shows the correct printer but my documents still won't print.  What can / should I do for these 2 working together?  Don't want to have to buy a new printer just to get something that works with 7.

  I was too frustrated. Finally, I solved the problem. I bought a parallel to USB cable head Gear. First attempts do not work. Unplug the printer from the computer. That removing all printers (some I just created trying). Make sure that you do not have the test pages in the queue (cancel all), otherwise impossible to remove printer. Also update windows drivers (to add the printer section). Turn off the computer. Connect printer USB available on the computer again. Turn on computer. And. You DID!

• Connection to printer on the network with a system from Vista to Winndows7

  Network of 5 computers 2 are on Windows 7, the rest under Vista. The printer on a Windows 7 machine is connected to all systems.  I can't get the Windows 7 machines to connect to the printer on a Vista machine? a mistake is 0x00000002

  I tried to link printers manually via a local port like nam computer\printer, this is denied.

  Any information will be helpful thanks

  This has nothing to do with Windows Update. Please post here instead: http://social.answers.microsoft.com/Forums/en-US/w7network/threads ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• PC can connect to the printer, but Mac cannot even with updated drivers.

  We have an HP Photosmart Premium C309g, which is connected to a Cisco Linksys EA2700 wireless router. The printer connects easily to the PC with windows 7. However on macs with Lion, the printer will be displayed when you type the IP address in the browser. However when you try to load the printer it does not appear. If you use the IP address to load it does not connect to the printer. He used to work. The only changes are a new PC and a new wireless router. I tried to update the drivers and software on the Mac. It did not help. Still the same problem.

  Hello

  Unlike Windows, peripheral Apple uses Hello (which is based on the multicast) to connect with the HP device over the wireless network.

  As far as I'm aware routers Linksys not configured for multicast by its default value.

  Try the following and check to see if that can help you:

  1. Enter the router from your browser homepage.
  2. Enter in the Security tab,
  3. Check filter multicast.
  4. CLCK save changes.
  5. Reboot the router and check any change.

  Kind regards

  Shlomi

• How to connect the voice tab slate HP printer Laser HP M 1005 mfp

  Can u please detailed on the configuration steps required to make the connection?

  Unfortunately, your Laserjet Printer is not on the list of the ePrint enabled printers.

  This means that printing of the slate with android wireless network adapter is not currently possible.

• Printer on Windows 7 PC, unable to connect with the laptop with Vista

  I have a Lexmark 2600 Series printer on a Windows 7 32-bit computer.  I am not able to connect to the printer with Vista laptop for my wife.  I can share files and see the printer.  I try to connect and I get "Windows cannot connect to the printer. Impossible operation completed (error 0x000003eb). "I tried to install locally and change the path without success.  Any help would be much appreciated.

  Hi Zyfot,

  First of all, I would say that you add the printer on the vista computer and check.

  1. open Printers by clicking the Start button, clicking Control Panel, hardware and soundand then click Printers.
  2. click on Add a printer.
  3. in the Add Printer Wizard, select Add a network, wireless or Bluetooth printer.
  4. in the list of available printers, select the one you want to use, and then click Next. If your computer is connected to a network, only printers listed in Active Directory for your domain are displayed in the list.
  5. If prompted, install the printer driver on your computer. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  6. follow the steps in the wizard and then click Finish.

  Install a printer on a home network
  http://Windows.Microsoft.com/en-us/Windows-Vista/install-a-printer-on-a-home-network

  Network printer problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems

  Also, make sure that the print spooler service is running on the windows vista computer.

  A print spooler is the service that temporarily stores the disk printing hard or in memory until the printer is ready to print.
  You must be logged on as administrator to perform these steps.

  1. open Administrative Tools by clicking the Start button, then Control Panel. In the search box, type Administrative Tools, and then click Administrative Tools.
  2. double-click on Services. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  3. right click on the print spooler service, and then click Properties.
  4. under the tab general , next to Startup type, make sure that Automatic is selected.
  5. If the service is not already running, under Service status, click Startand then click OK. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  I hope this helps!

  Halima S - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Unable to connect to my printer - operation failed with error 0x00000002

  My printer was working with my laptop via a wireless network. Now I can't print or connect to my printer. I'm always connected to the network, but I can't connect to the printer. When I try to add it, I can see the name of the printer and I select it, but I get the error "Windows cannot connect to the printer" [operation failed with error 0x00000002]. I changed from Windows Vista to Windows 7, several months ago, but I don't know if that makes a difference (I think I used printer at least once since I change). Help, please.

  Ive had the same problem.  Win7 - 64 bit tries to connect to a printer on another pc win7 64-bit.

  "Unable to connect to the printer.
  "error code 0x00000002".

  what worked for me:
  Right click on computer, select Manage
  Click on "services and applications", then click on 'services '.
  Scroll down to "print spooler", right click and select "Properties".
  Click 'STOP' service, and then click on 'START' service.

  Start the "Add printer" Wizard and it worked, yay!

• Unable to share the printer attached to the XP with windows 7, receive error message: windows cannot connect to the printer: operation failed with error 0x000004f1.

  Original title: printer HP LaserJet 4050 of PCL6 compatible with Windows 7?

  I have a desktop windows xp pro (SP3 5.1.2600) and you have a printer HP LaserJet 4050 PCL6.  The printer works fine connected to the desktop computer with a parallel port.  I'm trying to share the printer on my home network so that Win 7 (6.1.7601 SP1) laptops can use its printing features.  Please help.

  First I tried to add it with \\hostname\printername that returned this error: windows cannot connect to the printer: operation failed with error 0x000004f1.
  I downloaded and installed the Win7 drivers on the HP site on my laptop Win7, that has not changed a thing: http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=18318&prodTypeId=18972&prodSeriesId=25475&swLang=8&taskId=135&swEnvOID=4063
  Thanks in advance for any help / support!

  Hello

   

  1. the two Windows XP, Windows 7 connected in a same workgroup?

  2. can you access files shared XP of Windows 7 computer?

  3. check if the printer is shared or not?

  I suggest you follow these methods and check.

  HP LaserJet 4050 PCL6 printer is not compatible with Windows 7. Printer drivers are available for Windows XP-based computers only.

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=18972&prodSeriesId=25475&prodNameId=18322&swEnvOID=228&swLang=8&mode=2&swItem=LJ-4119-3

  It is not in the Windows 7 Compatibility Center.

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/search.aspx?l=en-us&type=hardware&s=4050%20PCL6

  I sugegst you contact HP support for Windows 7 drivers, after you instaall drivers to check with the question.

  http://WWW8.HP.com/us/en/support-drivers.html

  See also: networking computers running different versions of Windows

  http://Windows.Microsoft.com/en-us/Windows7/networking-home-computers-running-different-versions-of-Windows#section_7

  I hope this helps!

• After cleaning viruses with Norton software, I lost my Brother printer connection. Message: Printer Spooler Service does not. Can anyone help me to restore

  I lost the connection to the printer or I can add a printer because it - Printer Spooler service does not. Can you have a suggestion or an opinion. Thganks much. Michael

  Right click on 'My computer' / select 'manage '.

  Under "Services and Applications", select 'Services '.

  Check to see if the "Print spooler" service is "started" and "Startup Type" is set to "auto".

  Also check if the 'RPC Remote Procedure Call () service is also "started" and "Startup Type" is set' auto.

  J W Stuart: http://www.pagestart.com