Connection to Beehiveonline via ftp does not work

Similar Questions

• HP Pavilion 20 via a port usb/VGA connection to monitor additional 20 "does not work

  It's all in the title. Several people on the internet told me to buy a usb cable to vga to connect an external monitor. I did it and it does not work. Can you help me?  I have windows 8.1.

  HE will get another. cable converter, best I'll try it and then I'll come back. Thank you very much for your help!

• Check sensor SFR with FireSight via VPN - does not work

  Hello security experts.

  I have an ASA5515-X with SFR installed 5.4.0 and manage with 5.4 FireSight installed on the virtual machine on LAN and I record the sensor without any problem but when I try to register the sensor to FireSight via VPN I can't do. The interface on the ASA management has no intellectual property nor nameif configured and the interface is connected to the switch, SFR has the IP even configured as LAN addressing. I can see traffic being exchanged between the sensor and the FireSight but I can't save the sensor.

  Has anyone managed to register the sensor via VPN? Is there something else to be configured in order to save the sensor with the MC via the VPN?

  The delay between the Firesight and the sensor (on WAN and VPN) I get between 80 and 100 ms, what could be the problem?

  Thank you very much!

  Remi

  Hello

  If you are unable to telnet from DC to the sensor on the port 8305 delivers connectivity then.

  Can try you to ping from sensor to DC:

  ping -M do -c 20 -s 1572 

  By default, the MTU is 1500 on eth0, if the ping does not work I will suggest to lower the MTU on the interface and see if it works. See also: / var/log/messages | grep sftunnel and see the error messages on DC and sensor and send it to me everywhere. Best regards, Aastha Bhardwaj rate if this is useful!

• Connection problem: The DHCP service does not work.

  Original title: connection problem

  After got rid of a virus, my computer is always trying to get the network address. I found that the DHCP service does not work on my computer. How can I reinstall. I am running windows xp service pack 3

  Hello

  Follow these steps and check if they help.

  Step 1:

  Look for the DHCP Client service and DNS Client Services if they are started.

  a. Click Start.
  b. click on run and type Services.
  c. click right on - run as administrator.

  Check if the below mentioned services has mentioned State and type start.

  Client DHCP started Automatic\Manual.
  Client DNS started Automatic\Manual.

  Also check the dependency that are required for the DHCP Client services and DNS Client Service runs.

  To verify that double-click the service, and click the Dependencies tab.

  Step 2:

  I suggest you to reset TCP/IP settings to solve the problem.

  How to reset the Protocol Internet (TCP/IP)

• can't connect to windows cuz fingerpreint does not work

  Hey guys

  Since I clicked on diagnostic startup in msconfig and restarted my laptop (which is pavilion dv6 1390), I can't get through the windows log in the page cuz fingerprint reader does not work and I have fogot my password.btw for more information the speaker be rocking in this page.

  pls help me with this its driving me crazy

  BTW, the p/n is vj685ea #abv

  Hello

  Since the finger print reader does not and you have forgotten the password, you will need to reinstall the OS back to Windows that you are using Windows 7, in which you cannot reset the password until you have another administrator account.

  So once you reinstall the operating system, your computer will be set to the first day and you will lose all the data stored in the device or when running the system recovery, you can back up data by using the backup and then perform a system recovery.

  http://support.HP.com/us-en/document/c01867418

• EA4500 - Remote FTP does not work

  O read lots of itens of the same subject, but I have not found a solution. I bought an EA4500 wireless router. I plugged a 1Gig HD using the usb storage port and I activate the FTP service to access my files. Using the local network works fine, but now... I am outside my house and I need to get a file that is in my storage connected to my wireless router. I have unchecked the "anonymous internet request' box... version of the firmware: version 2.1.39.145204.

  How can I access my storage?

  Guys,

  I found the solution! The main problem is that my internet service provider does not allow port 21... and 8080... and 443. So first, I changed the FTP port 8085 in wireless router.

  The second thing is that I need to create a rule to share: click on "Access to records", after that, click the user that you want to use... click on share... and create a new rule, as "share all folders."  That click on apply.

• Wireless connection on Satellite A60 743 does not work properly

  I can't get any connection to wireless internet with my laptop. How can I use it? This notebook should have wireless, but I tried to connect and nothing happens! Please help me!

  Best regards

  NASI

  Hello

  Don t be angry against me and sorry for my next hard words but these statements likethis laptop should have wirelessor I tried to connect and nothing happensare bulls * t!

  Do you know what is Wlan and how does it work?
  Regarding your statement I n t think so!

  First of all why you propose this notebook should support the WLan card! Who told you that!
  I checked the hardware configuration of this laptop and Satellite A60 743 was delivered WITHOUT WLan minPCI card!

  Why you n t check in the first step!
  You should check the WLan card availability in Device Manager. Under network adapters, you should see the wireless network card.
  If the wireless network adapter does not appear, you have no. WLAN!

• USB headset connected to PC speech recognition does not work

  * Original title: can not make headphones work

  I installed a software that involves speech recognition.  I plugged my USB to the PC headset, but when I tried to use Set Up microphone in the control panel / recognition speech nothing works.  I have connected the headphones to an other PC Win7 and it works perfectly, in fact I could stop using a keyboard.

  I reconnected the headset with the first PC and still nothing happens, but I see a message saying "recognition speech could not start checking the Audio devices and sound themes".  I can't find it.

  I looked in devices and printers in CP and found the helmet (C-Media USB headphone set) when I look in Properties / General there is a message "device cannot start (Code 10)".  When I check the driver tells me that the driver is up-to-date.

  When I shut down and restart the PC with headphones connected to a USB port on the front of the PC, I hear a small amount of Crackle, but nothing else.  As I have already said, there is a message on the office, 'recognition speech could not start. and "speech recognition could not start checking the Audio devices and sound themes"

  I have run Windows Update to see if there is an update there, but it makes no difference.

  How can I talk to my PC using my headset?

  Thank you

  Tregarth

  I tried 2 different USB ports on the front of the PC, no improvement.

  I also looked into devices and printers (in Control Panel), the helmet does not show.  Also, when I look in device in CP Manager there is no exclamation point in audio, video and game controllers.

  Usually, the front USB ports are connected by cables (often not armoured or not) to the USB controller in the back of a box of the desktop computer. If you haven't tried a rear USB port, please do. If your laptop no matter what USB port should be good.

  You cannot control Audio through devices and printers. You don't say what version of Windows you are using. If you use a version of Windows with a bottom taskbar, RIGHT click ON the speaker down icon to the right of the taskbar. Select the recording devices. This will open the acoustic window. You should see a USB microphone in the list. See screenshot below. Highlight the USB microphone and set it as the default. This should solve your problem.

  Marty

  

• FTP does not work

  I put in place a link using CyberDuck FTP to access my temporary site CODABOW

  to upload and download files.  He worked for a while and now CyberDuck does not allow me access.

  are there steps I can take to get CyberDuck works again?

  something was damaged at the end of Adobes requiring a re-creation?

  THANKS for any help on this

  Rick

  [email protected]

  The EU option is always required, at least on Windows in Dreamweaver.  Since I am on a Windows machine, I can't speak for CyberDuck.  Sometimes, when I'm in trouble, I use Filezilla client (FileZilla - Client Download).  It is available for Mac, so maybe it's an option to get around the problem of parameters you mentioned.  Also, try to open a support ticket with BC.

• a lexmark x 544 to connect to a wireless network does not work

  I HAVE a LEXMARK X 544 & can NOT GET IT ON MY WIRELESS NETWORK - I tried all three wep, wpa, wpa personal options with the key at the back of my router but no luck.  Help appreciated.

  Portable PS & other devices are connected wirelessly.

  Hi Amcfad,

  ·         What operating system is installed on your count?

  ·         You receive an error message?

  The majority of connection inside Windows 7 problems have been resolved by installing the latest driver for the device obtained from the manufacturer.

  http://support.Lexmark.com/index?page=product&locale=en&ProductCode=LEXMARK_X544&segment=support&UserLocale=en#1

  For more information about the update of drivers, see the article:

   

  Update drivers: recommended links

  http://Windows.Microsoft.com/en-us/Windows7/update-drivers-recommended-links

  I hope this helps.

• I have an internet connection, and now Remote app does not work with my Apple TV.

  Hello

  My Apple TV remote broke so I use the Remote App on my phone, but we recently got a new router and network connection and so now it is impossible for me to use with my Apple TV because I can't update the wifi settings so that it can connect to the new wifi... How should I do? I can't update the wifi because I need the TV and my iPhone to be connected to the same wireless network for do, which is impossible. Appreciate any help!

  Use the remote device provided with the ATC to access settings and change the information of WiFi.

• Windows Vista tells me that I have a wireless connection. However, the internet does not work. How can I fix it?

  The small globe appears telling me that I have a connection and bars 1 to 3 (of 5) but I can't load the internet or online games. I just installed a game called Rohan online. Se that screwed up my connection? Also, I use AVG as my virus protection. I see that it blocks the packets, but even when I turn it off temporarily can't connect to the internet. What is the problem?

  Hi Morgan0o0o,

  (1) web browser you use to access the internet?

  (2) what is you receive the exact error message?

   

  Method 1: You can see the steps outlined in the article below

  You cannot connect to the Internet from a Windows Vista computer that uses a .pac file local

  http://support.Microsoft.com/kb/937151

  Method 2: How to troubleshoot network connectivity problems in Internet Explorer

  
  How to troubleshoot network connectivity problems in Internet Explorer

  http://support.Microsoft.com/kb/936211

   
  

  Method 3: We can consider the uninstallation of Rohan online game and then check if the problem persists.

• 200 M from Toshiba does not work with 10W connected/Vista Home Basic 32-bit

  Dear Sir

  I m having a problem with my Toshiba M200 laptop, it shows no text display or clear blue/green screen or different models with the connected 10W. But it does not work with the battery. Afer complete the system startup and normal screen if I connect the power 10W then works perfctly ok. The same procedure should be followed evertime I use my laptop.

  Can someone guide me weather it is a hardware problem or software related problem?

  Dipak Chowdhury

  Hello

  Have you checked with a different AC adapter?

  This seems to be a hardware problem.  You will need to contact the manufacturer of your computer to be able to find a solution to this problem.

  http://forums.Toshiba.com/

• Satellite 1110: Secondary display does not work

  I have a satellite 1110
  Connection of a monitor second - does not work
  The settings are correct in what, move your mouse off the screen of the laptop and he enters the secondary monitor - but this monitor is empty
  Tried all the normal things - control work? Yes etc.
  I'm running XP Professional could be corrupted or is it more likely to do with my laptop

  Please someone help - new monitor for Christmas - just can't make it work

  Thank you

  Hello Nick

  According to your description, you can't write that the second display doesn t work. Of course, you have activated the option called extend my Windows desktop on this monitor. In this case, you can remove all windows laptop for external monitor screen.

  If you work with more different windows on this way, your work will be more comfortable. I assume that you do want this and it will be interesting to know how you want to use the secondary display:
  -secondary display only
  -but both with the same point of view?

  Remove the scope option and use the FN + F5 key combination and choose display to use.

  Good bye

• I put a new ink jet cartridge in the printer and the printer does not work although it is switched on

  Cartridge replacement installed on a lexmark 730 printer inkjet series all the cables and connections ok but the printer does not work

  Hello

  as the poblem started when you changed the ink cartridge contact Lexmark

  http://support.Lexmark.com/index?page=home&channel=supportAndDownloads&locale=en&UserLocale=en_AU