USB headset connected to PC speech recognition does not work

Similar Questions

• Speech recognition does not work in Windows 7

  Original title: Windows 7 and speech recognition

  I try to use speech recognition (Microsoft) on Windows 7. Whenever I have try and use it after a few seconds it stops working. I looked on the Microsoft website for updates or tips on the memory required etc. Any suggestions? I have the latest service pack applied. I have 2 GB of memory should I more?

  Thank you
  Anne

  Hi Anne,.

  Thanks to join Microsoft Community where you will find all necessary information about the Windows operating systems.

  Speech recognition does not work in Windows 7.

  The problem may occur if the microphone is not close enough to the voice or the microphone input is too low.

  Do you get any error messages?

  To check if the problem is for the above reasons, I suggest to visit:

  Why the computer does not understand my voice commands?

  http://Windows.Microsoft.com/en-in/Windows7/why-doesn

  I hope this helps. If the problem persists, or if you have problems of Windows in the future, let us know and we would be happy to help you.

• Speech recognition does not work

  It seems that MS speech recognition has bugs in Windows 7. At different times, he has different problems: can't set up a mic, cannot be enabled because "the language configuration is not supported." This seems to be the big problem. I tried to fix it with the online instructions, but could not find the fix said the statement was there.

  Hello

  Scenario 1: Problem with MIC.

  Before troubleshooting,

  1. make sure that the microphone is positioned close enough and you speak directly into it.
  2 make sure that the microphone cables are intact and unbroken. Make sure that the connections are loose and they fit perfectly into the computer.

  If the microphone input level is too low, make sure that the microphone input level is set correctly.
  Entry level to adjust the microphone

  1. Open Sound by clicking on the Start button, then Control Panel. In the search box, type sound, and then click sound.
  2. click on the recording tab.
  3. double-click on the microphone you are using speech recognition.
  4. click the levels tab and then use the slider to adjust the entry level for your microphone.

  Please make sure that the properties of the Microphone are set correctly and check if this solves the problem.

  See the links below for more details:

  Connect one microphone, music player or other audio device to your computer
  http://Windows.Microsoft.com/en-us/Windows7/connect-a-microphone-music-player-or-other-audio-device-to-your-computer

  Why the computer does not understand my voice commands?
  http://Windows.Microsoft.com/en-us/Windows7/why-doesn

  Scenario 2:

  Could you please answer these money questions?

  (a) don't you make changes on the computer before this problem?

  This problem may be caused by the speech recognition settings.

  I suggest the following steps:

  1. go in Panel of-> speech recognition

  2. click on options of speech of the advance on the left panel.

  3. change the language to another option.

  4 uncheck "review documents and mail to improve accuracy.

  If this does not work, change the language back.

  If the problem persists, please update the sound card driver and the BIOS to the latest version.

  Thank you, and in what concerns:

  I. Suuresh Kumar-Microsoft Support.

  Visit our Microsoft answers feedback Forumand let us know what you think.

• HP Pavilion 20 via a port usb/VGA connection to monitor additional 20 "does not work

  It's all in the title. Several people on the internet told me to buy a usb cable to vga to connect an external monitor. I did it and it does not work. Can you help me?  I have windows 8.1.

  HE will get another. cable converter, best I'll try it and then I'll come back. Thank you very much for your help!

• Satellite A30: Software Dragon Naturally Speaking speech recognition does not work!

  I am unable to get the speech recognition program 7.3 Preffered Dragon Naturally Speaking version to operate successfully on my laptop Satellite A30 P4, using Windows XP as the operating system. It works fine on my PC of similar specs as the Satellite A30. Speech recognition is very poor indeed with the Toshiba laptop. He was sent to the seller twice, but the problem is still not resolved. I know that this Dragon program works fine on other laptops.

  He is also unable to play some of my CD.

  I would like to know if the portable technology is unable to operate with Dragon speech recognition, or is the problem with the A30 series or with my specific computer?

  What characteristic specifications are necessary for the performance of Dragon with success of the Toshiba A30? This microphone is necessary? How many and what types of RAM? An additional sound card can be inserted into the laptop to improve performance?

  Help, please! Anyone with experience with Dragon speech recognition? What could be the problem of CD?

  [Edited by: admin on 19 June 05 14:33]

  Hello

  It's specific software problem and it is not easy to tell what can be the problem. In my opinion, it may be that his card on this unit has no performance you want. Sorry but I have no other explanation.

  These problems can be solved simply by contacting the producer of software because they have much more experience in troubleshooting.

• Speech recognition does not match the language of the User Interface in Windows 8.1

  How can I update my speech reconition language that matches my user interface language? Thank you

  Hello

  Thanks for posting your question on the Microsoft Community.

  I apologize for the inconvenience caused to you.

  I understand that the problem with speech recognition does not correspond with the user interface in Windows 8.1

  This issue would have occurred due to some damaged system registry entries.

  Please provide me with the following information to better understand the issue.

  1. What language is speech recognition uses in the system?

  2. What is the base language that is installed in the system?

  Note: Speech recognition is available in the following languages: English (United States & United Kingdom), French, German, Japanese, Mandarin (Chinese simplified and Chinese traditional) and Spanish.

  You can also check out the link below.

  How to use speech recognition

  http://Windows.Microsoft.com/en-us/Windows-8/using-speech-recognition

  Please provide the information above to help you best.

  Thank you.

• Connection problem: The DHCP service does not work.

  Original title: connection problem

  After got rid of a virus, my computer is always trying to get the network address. I found that the DHCP service does not work on my computer. How can I reinstall. I am running windows xp service pack 3

  Hello

  Follow these steps and check if they help.

  Step 1:

  Look for the DHCP Client service and DNS Client Services if they are started.

  a. Click Start.
  b. click on run and type Services.
  c. click right on - run as administrator.

  Check if the below mentioned services has mentioned State and type start.

  Client DHCP started Automatic\Manual.
  Client DNS started Automatic\Manual.

  Also check the dependency that are required for the DHCP Client services and DNS Client Service runs.

  To verify that double-click the service, and click the Dependencies tab.

  Step 2:

  I suggest you to reset TCP/IP settings to solve the problem.

  How to reset the Protocol Internet (TCP/IP)

• can't connect to windows cuz fingerpreint does not work

  Hey guys

  Since I clicked on diagnostic startup in msconfig and restarted my laptop (which is pavilion dv6 1390), I can't get through the windows log in the page cuz fingerprint reader does not work and I have fogot my password.btw for more information the speaker be rocking in this page.

  pls help me with this its driving me crazy

  BTW, the p/n is vj685ea #abv

  Hello

  Since the finger print reader does not and you have forgotten the password, you will need to reinstall the OS back to Windows that you are using Windows 7, in which you cannot reset the password until you have another administrator account.

  So once you reinstall the operating system, your computer will be set to the first day and you will lose all the data stored in the device or when running the system recovery, you can back up data by using the backup and then perform a system recovery.

  http://support.HP.com/us-en/document/c01867418

• Speech recognition does not recognize dictated.

  Recognization of speech is dictated not recognized as dictation, includes only orders. It is a novelty because when I started using it it worked fine. The microphone is very good because he always hears commands and responds correctly. Any ideas? Please, I beg you.

  Hi Mlee,

  Control Panel-> speech-> speech options Advance open pick and choose the language (English in the United States). Try the word by far.

  There are several ways to correct mistakes made during dictation. You can say "correct that" to correct the last thing you said. To correct a single word, say "correct" followed by the word that you want to correct. If the word appears several times, all instances are highlighted and you can choose the one you want to correct. You can also add words that are often misunderstood or not recognized by using the speech dictionary.

  To use the alternates Panel dialog box

  1. Click to open Windows speech recognition.

  2. Say "start listening" or click the Microphone button to start the listening mode.

  3. Do one of the following:

     • To correct the last thing you said, say "correct that."

     • To correct a single word, say "correct" followed by the word that you want to correct.

  4. In the Group of alternates dialog box, say the number next to the item you want, and then on "OK".

     Note

     • To change a selection, in the Group of alternates dialog box, say "Spell" followed by the number of the item you want to change, click 'OK '.

  Use the speech dictionary

  1. Click to open Windows speech recognition.

  2. Say "start listening" or click the Microphone button to start the listening mode.

  3. Say "open Speech Dictionary."

  4. Do one of the following:

     • To add a Word to the dictionary, click or say add a new Word, and then follow the instructions in the wizard.

     • To prevent a specific word of dictation, click or say prevent a Word from dictation and then follow the instructions in the wizard.

     • To correct or delete a word that is already in the dictionary, click or say change existing words, and then follow the instructions in the wizard.

       A speech profile has not been created. You can train your computer to better understand you by creating a voice profile that your computer uses to recognize voice commands.

       To create a voice profile

       1. Click to open speech recognition.

       2. Click Train your computer to better understand you, and then follow the instructions

          Thankzzzzz

• Speech recognition does not recognize as a word processor Open Office

  How can I get speech recognition to let me dictate in Open Office?

  http://www.oooforum.org/

  I suggest that you ask the members on the Forums of Office Open above.
  They must have knowledge of this.

  See you soon. Mick Murphy - Microsoft partner

• PNY attached 8 GB USB 2.0 Flash Drive recognized but does not work under the Windows 7 operating system

  I have an attached PNY 8 GB USB 2.0 Flash Drive that works perfectly on Windows XP. But when I try to use it on a Windows 7 operating system, it is very few recognized by Windows 7. I mean at least, is that when I look for the device by exploring 'Computer' in the menu start the device does not appear at ALL. However, when I go to control panel-> hardware and sound-> devices and printers, it shows a device called "DISK 2.0" which I believe are 'minimum' recognition of this 8GB flash drive, I was talking about. Can someone help me get the recognition for this camera on Windows 7? Thank you.

  Edit: I noticed in Device Manager-> USB MASS STORAGE DEVICE-> Propteries the following for my optical mouse Microsoft and the PNY 8 GB flash drive

  The Microsoft Optical mouse is the location: Port_ #0001.Hub_ #0004

  On the MagicJack (USB Composite device) is the location: Port_ #0002.Hub_ #0007

  On the flash drive is the location: 0000.001d.0002.002.000.000.000.000.000

  3rd place property looks pretty weird (Im assuming that third location data for the flash player, since the only other USB devices are my Microsft mouse and the MagicJack I know is a composite device, but I'm wrong.  AMD Athlon 64 3200 + 1GIG memory ATI Radeon X800XL 250gig W.D. hard drive

  An automatic Microsoft Windows update fixed my problem with this specific long ago PNY USB flash drive. It has been set at least the last 6 months or more.

• Satellite 105-S157: USB 2.0 via a PCMCIA card does not work

  I installed the pcmcia card with BIOS update V2.1 and work under WIN XP sp2.
  It seems to work normally in Device Manager, but when I plugged in the USB, it may not recognise.
  If I can access usb PCMCIA ports.

  This laptop does support USB 2.0?
  How can I make it work?

  Please help?

  Thank you

  Hello

  It is a brand new model Toshiba and I guess that it supports high speed USB 2.0.
  Sometimes, the operating system can not recognize external USB devices due to the limitation of power. The fact is that the USB port gives the 500mA. It is a standard value.
  If the USB device use a higher power, the OS cannot recognize and activated the device.
  In this case the external power supply is necessary. Another possibility is to use the USB hub with an external power supply.

• Wireless connection on Satellite A60 743 does not work properly

  I can't get any connection to wireless internet with my laptop. How can I use it? This notebook should have wireless, but I tried to connect and nothing happens! Please help me!

  Best regards

  NASI

  Hello

  Don t be angry against me and sorry for my next hard words but these statements likethis laptop should have wirelessor I tried to connect and nothing happensare bulls * t!

  Do you know what is Wlan and how does it work?
  Regarding your statement I n t think so!

  First of all why you propose this notebook should support the WLan card! Who told you that!
  I checked the hardware configuration of this laptop and Satellite A60 743 was delivered WITHOUT WLan minPCI card!

  Why you n t check in the first step!
  You should check the WLan card availability in Device Manager. Under network adapters, you should see the wireless network card.
  If the wireless network adapter does not appear, you have no. WLAN!

• USB ports on the Satellite L30-105 does not work after the downgrade from Vista to XP

  Hello

  Model: Toshiba L30-105 PSL33E-02S02HFR.
  USB ports (2) do not work after the downgrade from vista to Windows xp family. All the drivers downloaded from Toshiba Web site.

  Thanks for any help,

  Camellia,

  Have you installed Win XP all service packs?
  SP2 provides some patches on the USB feature.

  You definitely need to update the Win XP OS

• Windows wireless usb AS TP Link TL - WN822N Utility does not work

  This device has been installed on this computer in December 2011 and was active until I removed the unit in February to move to another city.  I was then cable internet service. In June of this year, I rebooted my Windows 7 operating system.  Now, I am wanting to re - install the device on this computer... I can download the appropriate driver, Device Manager indicates which driver I use and works correctly.  What I have a problem with is the utility program for the device.  It loads, but won't work at all.  It is stuck in advanced mode and I need to get into the mode of the system to set up the wireless network. This utility has worked in December, but will not work now.  I had this problem if I use the disc that came with the device or if I download the utility from the manufacturer. The only thing I can think is that a Windows Update is at the origin of the problem, but I would have no way of knowing what update is the cause of the problem. If I knew, I could remove it. At this point, I could re - install Windows 7 Home Premium 64-bit and disable the updates.  Then add each individually and see if it interferes with the utility.  It's a hassle I would rather.  Does anyone have a solution for this mess? Thank you.

  Hello

  Try contacting the manufacturer of software/hardware for any download needed for the utility is running.

  Post that we bring to the status