EA4500 - Remote FTP does not work

Similar Questions

• Satellite X 200 - after upgrading Vista remote control does not work

  Hello

  I have upgrated my Vista Home Premium to Vista Ultimate and the remote control does not work. Well upgraded... I bought Vista ultimate and it installed.

  Is there a driver for my remote?

  You may need to install the infrared driver.
  This driver is required to activate the infrared port on your laptop.

  You can find it here in the X 200 section
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

• Satellite P100 remote control does not work

  Hello

  Guys, I bought a toshiba satellite p100 and the remote with it does not work...

  no idea why? the battery must be fully charged... but when I press the buttons of the led on the remote control does not work or the other...

  Help, please...

  Thank you...

  Post edited by: qazam

  Hi Qazam

  How did you test the remote control?
  What do you mean who does not? Some functions does not work or a complete remote control cannot be used?

  I read the user manual and it seems that the remote will work under Windows mode with WinDVD or Express Media player, and Windows Media Player when the laptop was not started in the Windows operating system.

• IR remote control does not work with the new imac

  IR remote control does not work with the new iMac. From 24 "2007 machine to last 27"

  Correct, because Apple no longer includes the IR sensor in newer models

• Remote Desktop does not work since MacOS Sierra update

  Unable to connect with Remote Desktop or cord that worked before update

  Greetings geoffshop,

  Thank you for using communities of Apple Support. It seems you want to use under macOS Sierra remote desktop, but it does not work.
  I recommend you read this article, it has the settings you want to check to make sure that it is able to work.
  

  macOS Sierra: allow remote desktop to access your computer

  Take care.

• Qosmio G30 - Media center remote control does not work in windows

  Dear all,

  I have a Qosmio G30-194,
  first I had a problem with VGA, send it for repair, when she comes back, I noticed that the remote does not work on windows Media Center, while that in A / mode V work perfectly.

  I tried a full system recovery DVD restore, but nothing has changed, even, I installed Windows Vista with all its pilots.
  Nothing has changed too, I borrowed a USB IR received for another remote that it worked perfectly with my remote on windows.

  Please advise me what to do, should I send it to the service center, or there is an easier solution.

  Mazen h
  NB:,: my laptop info are:

  PQG32E-01P018AR model number

  Thanks in advance

  Hello

  > first of all, I had a problem with VGA, send it for repair, when she comes back, I noticed that the remote does not work on windows Media Center, while that in A / mode V work perfectly.

  If you had a problem with the VGA chip then the whole motherboard has been replaced.
  Maybe it has something to do with your problem.

  Anyway, as far as I know you don t need any special drivers if you want to use the MCE Remote control. For the use of the remote control with Qosmio player you need to connect a USB infrared.

• Remote assistance does not work anymore

  Original title: 'remote assistance '.
  I used to use request remote assistance.  The two parties have windows live mesgr.  It stops working.  Video and calls still work at this party.  Only remote assistance.  Can you help me?

  Hello

   
  1. have you made changes on the computer?
  2. you receive an error message?
  
  You can perform the steps in the link and check:
  HOW to: Enable Remote Assistance in Windows XP
  http://support.Microsoft.com/kb/305608
  
  You can also check out the link:
  Remote assistance may not work if Internet Connection Firewall is enabled
  http://support.Microsoft.com/kb/310608
  
  If you have any questions related to Live Messenger. You can display the query in the link mentioned to get assistance:
  http://www.windowslivehelp.com/product.aspx?ProductID=5

• Diagnostic test Exchange fails with 'Quest remote command does not work.

  I configured vFoglight and monitoring Exchange in a lab. When I run the diganostics Exchage test I get error "Quest romoting command does not work. I made sure that the agent's account "RUN as Service" applied.  Any ideas as to what may be causing this?

  Hello

  We look at your environment. Please open a case of pension.

  Sincerely

• Remote control does not work, and the load does not appear on Apple TV

  Hello

  I just returned from vacation and my remote seems has stopped working.   Naturally, my first assumption was that the charge was simply exhausted.

  Apparently that was the case.   He seems to have just died.

  I did pay for more than two hours and it still does not appear under devices Apple TV.

  My Apple TV 4 works very well because I use the remote control of my phone to navigate through it.

  If I understand correctly what I look at you, it seems that the remote control is same not synchronized or recognized by Apple TV more.

  Any suggestions on how to fix this?

  A reset is complete? Restart... no change.

  Thank you

  Bob

  1. Have you tried pressing the menu and the button for a few seconds while it now an inch or two away from the Apple TV, if successful, you should see a message on the screen saying the remote was paired.
  2. If you have an older remote from a previous model MacBook or Apple TV, you can use to restore the Apple TV, which, in many cases, has been sufficient to reactivate the remote Siri. You must complete all upward to undertake a restoration.
  3. If you have a USB cable - C you can try to restore by connecting it to iTunes on a computer.
  4. If you have tried all of these steps, don't have a distance sooner or a USB - C cable or their use is too inconvenient, return it to the store where purchased for a replacement, or to couple for you.

• Satellite A500 - 14 H - remote control does not work

  I have a Satellite A500 - 14 H with the big remote control, but it doesn't work.
  Can someone help me?
  I installed the remote control manager, but no change. He still does not!

  I assume that you got your laptop with preinstalled operating system.
  Have you tested the feature with the parameters of this plant?

  Is remote controller completely dead or some functions do not work?

• remote VPN does not work on Cisco 7206

  Hello

  I do a test to set up remote access to VPN from Cisco 7206 (simulated by dynamips). The relevant configuration is the following:

  hub host name

  AAA new-model

  AAA authentication login local xauth

  username ciscouser password 0 cisco1234

  IP subnet zero

  crypto ISAKMP policy 10

  md5 hash

  Group 2

  preshared authentication

  test group crypto isakmp client configuration

  key cisco123

  pool mypool

  card crypto REMOTEACCESS client authentication list xauth

  Crypto ipsec transform-set RTP-TRANSFORMATION des-esp esp-md5-hmac

  Vpn crypto dynamic-map 1

  game of transformation-RTP-TRANSFORM

  open crypto map REMOTEACCESS client configuration address

  card crypto client configuration address respond REMOTEACCESS

  card crypto REMOTEACCESS 1-isakmp dynamic vpn ipsec

  interface Ethernet0/0

  IP address 150.1.1.1 255.255.255.0

  card crypto REMOTEACCESS

  interface Ethernet0/1

  IP 11.10.1.1 255.255.255.0

  no ip directed broadcast to the

  IP local pool mypool 10.1.10.0 10.1.10.254

  IP nat translation timeout never

  IP nat translation tcp-timeout never

  IP nat translation udp timeout never

  IP nat translation finrst-timeout never

  IP nat translation syn-timeout never

  IP nat translation dns-timeout never

  IP nat translation icmp timeout never

  IP classless

  IP route 0.0.0.0 0.0.0.0 10.103.1.1

  no ip address of the http server

  end

  However, when I try to connect the router using the Cisco 4.6 client, you receive the following error message:

  05:04:52: ISAKMP (0:1): audit ISAKMP transform 13 against the policy of priority 10

  05:04:52: ISAKMP: DES-CBC encryption

  05:04:52: ISAKMP: MD5 hash

  05:04:52: ISAKMP: group by default 2

  05:04:52: ISAKMP: auth XAUTHInitPreShared

  05:04:52: ISAKMP: type of life in seconds

  05:04:52: ISAKMP: life (IPV) 0x0 0 x 20 0xC4 0x9B

  05:04:52: ISAKMP (0:1): pre-shared key offered Xauth authentication but does not match policy.

  05:04:52: ISAKMP (0:1): atts are not acceptable. Next payload is 3

  05:04:52: ISAKMP (0:1): audit ISAKMP transform 14 against the policy of priority 10

  05:04:52: ISAKMP: DES-CBC encryption

  05:04:52: ISAKMP: MD5 hash

  05:04:52: ISAKMP: group by default 2

  05:04:52: ISAKMP: pre-shared key auth

  05:04:52: ISAKMP: type of life in seconds

  05:04:52: ISAKMP: life (IPV) 0x0 0 x 20 0xC4 0x9B

  05:04:52: ISAKMP (0:1): pre-shared authentication offered but does not match policy.

  05:04:52: ISAKMP (0:1): atts are not acceptable. Next payload is 0

  Does anyone have an idea? Thanks in advance.

  Wang,

  Thanks for the update! Happy in his work.

  The commands below are for the search for group policy.

  AAA authorization groupauthor LAN

  card crypto isakmp authorization list groupauthor REMOTEACCESS

  Since then, you have configured Group Policy (name, presharedkey, etc.) locally on the router, you must specify the router where to look for the isakmp policy when VPN cace tries to connect.

  I hope it helps.

  Kind regards

  Arul

  * Please note all useful messages *.

• Receiving IR of HP and MC remote control does not work after upgrading Vista to Windows 7.

  I upgraded a laptop HP dv9249us for Win 7 Ultimate (64 bit) and Home Premium (32 bit) respectively of Vista and an HP HDX 18 and found that the small remote controls supplied with the PC HP no longer work the IR receiver to control WMC.  For the moment I tried to find a solution for the dv9249us, as the HDX has also a greater remote specialized for the tv tuner, which is still working, but I found that HP did not provide software Win 7 upgrade for this model.  I tried a thought fix it was to be a known side effect of the upgrade process because he appeared in two different rooms and found a HP IR driver referenced to correct this problem for another model called ENE CIR Receiver Driver (sp41645.exe) and install this on the dv9249us without result.  When you check the Device Manager on the dv9249us I have not found reference to an IR unit either in the areas of Human Interface or Universal Serial Bus controller.  I found a reference IR in the section of the Human Interface of the HD-18 referencing an ENE CIR Receiver.  Ideas that you could provide for a non-professional would be appreciated.

  I can not find a model of dv9249 specifically on the hp site. I found the dv9200
  series. you have a link to your specific model?
   
  in all cases, try to remove the Device Manager devices and if requested if you want
  to remove drivers, select Yes. then make a stop at cold and then turn it on.
  Finally, see
  http://h30434.www3.HP.com/T5/notebook-operating-systems-and/Ene-CIR-receiver-conflict-in-Windows-7/TD-p/161289
   
  link of a person found an alternative driver that solves the problem) on the page
  (See above).
   
  It seems that several HP models affected related issues.
   
  If this does not resolve the problem, suggest that also posting in the forums of HP.
   
   
   
  On Saturday, January 15, 2011 19:12:50 + 0000, shanewc wrote:
   
  > I upgraded a HP HDX 18 and a laptop HP dv9249us for Win 7 Ultimate (64 bit) and Vista Home Premium (32 bit) respectively and have found that the small remote controls supplied with the PC HP do work more the receiver IR to control WMC.  For the moment I tried to find a solution for the dv9249us, as the HDX has also a greater remote specialized for the tv tuner, which is still working, but I found that HP did not provide software Win 7 upgrade for this model.  I tried a thought fix it was to be a known side effect of the upgrade process because he appeared in two different rooms and found a HP IR driver referenced to correct this problem for another model called ENE CIR Receiver Driver (sp41645.exe) and install this on the dv9249us without result.  When you check the Device Manager on the dv9249us I have not found reference to an IR unit either in the areas of Human Interface or Universal Serial Bus controller.  I found a reference IR in humans
  Interface
  > HD-18 section referencing an ENE CIR Receiver.  Ideas that you could provide for a non-professional would be appreciated.
   

  Barb Bowman

  http://www.digitalmediaphile.com

• FTP does not work

  I put in place a link using CyberDuck FTP to access my temporary site CODABOW

  to upload and download files.  He worked for a while and now CyberDuck does not allow me access.

  are there steps I can take to get CyberDuck works again?

  something was damaged at the end of Adobes requiring a re-creation?

  THANKS for any help on this

  Rick

  [email protected]

  The EU option is always required, at least on Windows in Dreamweaver.  Since I am on a Windows machine, I can't speak for CyberDuck.  Sometimes, when I'm in trouble, I use Filezilla client (FileZilla - Client Download).  It is available for Mac, so maybe it's an option to get around the problem of parameters you mentioned.  Also, try to open a support ticket with BC.

• BD Playstation Bluetooth remote control does not work with Toshiba BT stack

  Hello!

  I've matched Playstation Bluetooth Sony BD remote control (model: CECHZR1E) with Windows XP SP3 (Spanish) PC last Toshiba Bluetooth Stack v.7.10.12 running.
  But if I press the buttons on the remote does not respond any personal computer.

  I have configured the battery Bluetooth to run the AV and AV service must send commands to Windows Media Player. In Windows Media Player, I have configured to use command AV Toshiba.

  If I press a button on a remote control, with he can link to PC, the icon changes color and Configuration Bluetooth appears the link has been established, but it is the interaction I get this remote control.

  Please, advice that tests should I use or do I have to install any additional software.

  Thanks in advance for your kind attention!

  Ensure that the AV remote control Service is running:
  Right mouse click on Bluetooth-> Options... system tray icon-> [general] tab: 'AV remote control Service' (must be verified)

• Connection to Beehiveonline via ftp does not work

  Hello
  
  I am trying to connect to beehiveonline via filezilla. FileZilla is able to communicate with the ftp server. but it fails with an error finally. The log messages are given below.
  
  Status: Resolving address of beehiveonline.oracle.com
  Status: Connecting to 141.146.250.134:21...
  Status: Connection established, waiting for welcome message...
  Response: 220 service is ready for the new user.
  Command: [email protected]
  Response: 331 User name accepted. Need password for... @oracle.com.
  Command: MOVE *.
  Answer: 534 request denied for political reasons.
  Error: Critical error
  Error: Connection to the server could not
  
  Can someone let me know what can I do then?
  
  Thank you, Raja

  Raja,

  There are other customers - including a Java program I wrote which can connect to the system - the questions seems to be a combination of libraries and the configuration of the FTP installation on beehiveonline. Us will move it in a new data center soon and the config can change and support fileZilla - ftp.oracle.com works. In the meantime, we are at the mercy of the free offers.

  Phil