Connection to computer problems

Similar Questions

• 7520 HP Photosmart while connecting a computer problem

  Just bought this all-in-one today. Everything works except when I try and scan, then get the documents saved on my computer. The message says "no found computer." I don't know what to do. The printer is connceted via USB and wireless on my iMac.

  Please help.

  Hello

  Download and install the latest version of the software below:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=Al-106189-3&cc=us&DLC=en&LC=en&OS=219&product=5199463&sw_lang=

  Be sure to check the box next to recommended software HP during the installation to get full functionality, including scanning front panel.

  Shlomi

• HP Officejet Pro 8620: HP Officejet Pro 8620 - problem with wireless connection w/computer

  Hi all

  I recently bought the HP Officejet Pro 8620 and I have problems connecting with my computer.

  I used the Setup Wizard to connect the printer to the wireless network of my University, and when it's over, the blue light of connectivity remains a solid blue and the screen says it is connected, which is great. However, when I use the HP Officejet Pro 8620/software of connection instillation, I always get the message,

  "-L' the entered IP address is either incorrect, or it is another wireless network that has the same name as your network." Please ensure that your printer has this IP or enter the correct address below and click on search. Also, confirm that you wireless network is unique. »

  I did somehow on the printer IP address is copied 100% exactly the same with the points and the message still appears and my printer is unable to connect with my computer. As another option, it says that I can use the host name to find the printer as well. However, the same thing happens. I'll type in the name of host by number and letter by letter, and again, it does not find my printer. In addition, there is only 1 network name so I know I hit the right one. Being a student, it is very important that I get things printed off the coast, it is essential for me to solve this problem. Also, I spent a lot of money on it so I need to work properly.

  It should be easy to communicate that it gives me all the necessary information right in front of me, but as I said, it was not easy or fun experience. I don't really know how IP work addresses but I tried to use all the only thing that I can find that is relevant. From now on, I have to record everything in PDF format on my computer, send me unwanted, printing documents download them on my Galaxy Note 4, connect my phone to the printer using the wireless HP Direct on the Officejet and then finally I can print my things. Yes, it works like this, but it is also a concern and I shouldn't do that. I realize that I can't buy a USB link cable to connect my printer to my computer but I don't want to ride the 2 every time I want to print.

  (Also something to note, since I'm on WiFi from the University, I don't have access to the router of course so I don't know if this is a contributing factor in why things do not work).

  If anyone has suggestions/advice/answers on the issue, please let me know. Thank you!

  Hello @Plz_Help.

  Welcome to the Forums of HP's Support. I understand that you have a problem connecting to your computer and your printer via Wifi from the University. I would like to help.

  The only thing that really POPs, is that you use the network of universities. This can cause a lot of problems.

  Question: When you connect your computer or Note 4 on the network, should a pop-up saying you accept the terms of service? If so, this would prevent an air of challenge the printer properly connected to the network.

  If you had access to the router I would recommend checking the network connection by typing the printers IP address in a web browser. If you can access the printers webserver shipped, then, the connection is fine. If you can't you need to reset the router. Of course, you can do this.

  Also, here's something to consider: If the printer successfully on the network, everyone else on the network will have access to your printer.

  A USB connection will be the most reliable and safe way to go. Another thing, why send your rating 4 print jobs? Why not save the PDF files and connect the computer to the wireless network direct printers? In this way, you can print from your computer.

  Sorry I can't give you a solution ' to do this and it will work. You must convince the universities IT department to get things related.

• My sister has problems on his laptop, how can I connect to the laptop with my labtop to help him with his computer problems? Thank you.

  My sister has problems on his laptop, how can I connect to laptop with my labtop to help her with her computer problems when I live several States away? Please help me if you know how to do this thank you.

  Suggest you use Team Viewer, free version.
  It is used here every day for several hours.

  Please see the links below for more details...
  http://www.TeamViewer.com/en/index.aspx
  http://www.TeamViewer.com/en/products/remotecontrol.aspx
  http://www.TeamViewer.com/en/help/cat15-remote-control.aspx

• Problems connecting my computer to my wireless network when Photosmart C4780 is connected

  Hello

  I recently bought a new printer Photosmart C4780 wireless. It works fine via USB, but I seem to have problems when I try to set up with my router.

  Here's what happens:

  First of all, I run the Setup on the CD supplied with the printer (while connected wireless to my network).  I am going through the different steps and after Setup finds my network settings to give to the printer. After that, the Setup program tries to find the printer on the network.  It goes very well for about 4 or 5 seconds while the printer connects to my wireless... but then, once the printer connects, my computer disconnects causing an error Setup can not communicate with the printer because I'm not connected to a network.

  What is going on?

  If anyone can solve this problem for me, that would be amazing and be a great help!

  Chuck

  I'm sorry to say this but there are problems between SMC routers and HP printers.

  Search this forum MUCH info on the subject.

• Satellite C660 - connection Wi - Fi problems

  Hello

  I have the Satellite C660 with windows 7 64 bit which continually lost the wifi connection. The problem has been compounded in recent weeks. It takes the point a is the only one to connect with a network cable.
  I updated the driver for the current version 1005.23.622.2011 without success. All our other laptop have no problem with the wifi connection.

  Can someone help with this problem of frustasting before I go out a buy a wireless dongle?

  Wayne

  Hello

  Have you noticed this problem with an adapter connected to your laptop computer or power supply battery only?

• How to connect my computer laptop advent for my toshiba tv through hdmi cable.

  Please if anyone can help me with this

  I bought a hdmi cable to connect my computer laptop advent for my toshiba tv.

  BIG PROBLEM

  I don't understand the settings.    Call me thick but I was actually tryng to fix this for 2 months

  I am litrely to the point of screaming and ready to throw the laptop and the tv out the window (WHO COULD BE A SHAME REALLY SEE HOW I AM not ACTUALLY THE TV)

  If someone could be so kind as to help and to unmask how and what I have to press on and what to implement in what concerns the settings, I would be so gratefull thanks michelle smith

  Hi michellesmithozzyand,

  I suggest you follow the link given suggestions and check that it works.

  http://Windows.Microsoft.com/en-in/Windows7/connect-your-computer-to-a-TV

  Hope the helps of information.

• can I connect my computer dell laptop to my xbox 360?

  How to connect my computer dell laptop to my xbox 360?

  Hi KenziePeterson

  
  What operating system is installed on the computer?

  
  I suggest you refer to the below provided help links on the connection of the laptop to Xbox 360.

  http://Windows.Microsoft.com/en-us/Windows7/set-up-a-Windows-Media-Center-Extender

  http://Windows.Microsoft.com/en-us/Windows7/use-a-Windows-Media-Center-Extender

  http://Windows.Microsoft.com/en-us/Windows7/Windows-Media-Center-Extenders-frequently-asked-questions

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-solving-Setup-problems-with-Windows-Media-Center-Extenders

   

  I hope this helps.

• Windows Xp not connecting to another computer on the Working Group, but individually can connect another computer

  Windows Xp node fails to connect to another computer on the Working Group, but individually can connect another computer.

  I checked the file & sharing options of printer being checked on the general tab.

  Hello

  1. did you of recent changes on your system prior to this problem?
  2. where you able to connect to other computers through the front working group?
  3. do you get an error message?

  I suggest you try the procedure described in the below mentioned link and check if it helps.

  You cannot access shared files and folders or browse computers in the workgroup with Windows XP:
  http://support.Microsoft.com/kb/318030

  Hope this information is useful.

• Impossible to connect a computer to the wireless network, I would like to first of all the automatic configuration service and I need advice.

  Article 861122 start WZC

  Unable to connect a computer to the network wirelee I firstly the WZC serviceand I need advice. TX

  Hello

  • Are you referring to Wireless Zero Configuration (WZC) Service?
  • What happens when you start the automatic Wireless Configuration Service?
  • You receive an error message?
   
  If you experience problems with the wireless network, reconfigure the Automatic Configuration Wireless for all wireless profiles automatically, click the fix this toolfrom the link below.
  Click run in the file download dialog box, and then follow the steps in this wizard.
  Error message when you try to run the Network Setup Wizard update for Windows XP Service Pack 2, Service Pack 3, or Windows XP Tablet PC 2005 Edition wireless
   
  See also:
  In Windows network connection issues
  http://support.Microsoft.com/kb/313242

• When I try to connect my computer with XP operating system, I get this error message to: rund1132.exe and cannot log out.

  original title: log question.

  When I try to connect my computer with XP operating system, I get this error message to: rund1132.exe and cannot log out.  How can I fix?

  Hi KERRYYX,

  1. Did you the latest changes on the computer?
  2. When was the last time it was working fine?
  3. You have security software installed on the computer?
  4. What is the full error message that you receive?
  5. Are you able to restart and shut down the computer?

  It is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you put the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See section to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

  You cannot log off, restart or shut down your Windows XP-based computer

  http://support.Microsoft.com/kb/831431

• I can't connect my computer at home it has windows xp professional on... just go round in a circle with 30 seconds of countdown to try to open a session.

  I can't connect my computer at home it has windows xp professional on... just go round in a circle with 30 seconds of countdown to try to log on... I tried options menu that is to say; go to the last known working etc etc... but not good. Problem came when the wife has removed some material... not been able to get a blue screen connect etc. Since HELP!

  original title: help!

  If you have no Windows CD, you can not do a repair installation.

  If you have no Windows CD, the message from the moderator of the Forum Nicholas_W will not help you either.

  If the disk verification fails, there is no sense to try a repair installation because the file system was obviously some problems that must be fixed first (at least that is what I think).

  Wouldn't you want some ideas that actually work?

  The error:

  STOP: 0 X 00000024 0 X 00190203 0X82F42108, 0XC0000102, 0X00000000

  indicates a problem with your NTFS file system.  You can usually solve this by running chkdsk/r from the XP Recovery Console.

  The question was preceded by a loss of power, aborted reboot or abnormal termination? (This includes the plug pulling, buttons power and removing the battery).

  These can cause corruption in the file system that must be fixed before you do anything else.

  If none of these events occurred (or even if they have not taken place), you must verify the integrity of your file system before anything else (especially "try" things).

  Here's how:

  Boot into the Recovery Console Windows using an XP bootable installation CD.

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget.

  This is not the same as recovery disks that might have come with the acquisition of the system store.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

  http://www.ImgBurn.com/

  When you install ImgBurn, DO NOT install the Ask toolbar.

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

  A good idea before you start things must first verify the integrity of your file system by using the chkdsk command.

  In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

  Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

  Assuming your boot drive is C, run the following command:

  CHKDSK C: /r

  Let chkdsk finish to correct the problems, he could find.

  It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  You must run chkdsk/r again until it finds no error to correct.

  Remove the CD, and then type "exit" to exit the RC and restart the computer.

  You have not to set the BIOS to boot the disk HARD since the CD won't be.

• A computer problem and Streets and Trips would not run then reinstalled but without any updates I had before. Need to yupdate.

  Computer problem with deletion of program and after removal of the progtram, attempted to connect to "Streets and Trip" through my shortccut he said that I had not, so looked in "all programs and was not there either so I then rebooted my 2004 original"Streets and Trips"discs, and when it came it was not like that I had on and I tried to update but can't. not to get it. Help

  Hey bud,

  ·         Don't open the game fine but looks different?

  ·         If so, what difference do you see?

  Respond with more information so we can help you best. You can also post your request on the forums of Streets & Trips.

  Highway, Streets & Trips, MapPoint Forum

• Remote Desktop is designed to help users to solve their computer problems?

  Is it a good tool to use to help other users with computers there are problems?

  Hello

  Remote Desktop connection is a technology that allows you to sit in front of a computer (sometimes called the client computer) and connect to a remote computer (called the host computer) in a different location. For example, you can connect your computer to work from your home computer and have access to all of your programs, files, and network resources as if you were in front of your computer at work. You can leave programs running at work and then, when you get back, you can see the desktop of your computer work displayed on your computer at home, with the same programs running.

  Remote assistance:
  When you encounter a computer problem, you sometimes can help someone else. You can use Windows Remote Assistance to invite someone to connect to your computer and help you, even if that person isn't nearby. (Make sure you only ask someone that you trust, because the other person will have access to your files and personal information.) Once connected, the other person can view your computer screen and chat with you everything you see. With your permission, your helper can use his mouse and keyboard to control your computer and show you how to solve a problem. You can also help someone else the same way. This technology is called Remote Assistance.

  For more information, see these articles:

  http://Windows.Microsoft.com/en-us/Windows-Vista/Remote-Desktop-connection-frequently-asked-questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/connect-to-another-computer-using-Remote-Desktop-connection

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-the-difference-between-remote-desktop-connection-and-Windows-remote-assistance

  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-remote-assistance-frequently-asked-questions

  Kind regards
  Afzal Taher
  Microsoft technical support engineer

• Vista goes to 50% CPU usage and connects the computer for hours after the beginning

  Original title: Vista processor

  Stupid Vista goes to 50% CPU usage and connects the computer for hours after the start.  Cannot run anything with any request of CPU without getting bogged down and crashing.  It is not windows defender, I suspend this service and the machine is ok for another 1/2 hour, them I'm up to 50% of the CPU.  The idle process said Task Manager is > 90%, still indicates 50% CPU usage and the cooling fan looks like a 747 taking off.  Should I just pull the machine and go for Linux, or what?  Cannot run games or whatever it is, totally disgusted with vista of POS and microsoft can it Deep and do not get windows 7, it is probably worse.  Is that all I can turn off to get the same performance than, say, windows 3.1?  It would be preferable to the current situation.  MSCKMA.

  Hello

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  ----------------------------------------------------

  Follow these steps:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out what files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ===========================================

  Refer to these discussions because many more excellent advice however don't forget to check your antivirus
  programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
  first.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

  Hope these helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.