Problems connecting my computer to my wireless network when Photosmart C4780 is connected

Similar Questions

• my pc will not connect to wireless internet... It is said there could be a problem with the driver for the wireless network connection card

  connection network card

  my pc will not connect to wireless internet... It is said there could be a problem with the driver for the wireless network connection card... I'm not sure how to solve the problem of the dat

  Hello

  Did you change your computer?

  I suggest you to follow the links and check out them.

  The problems of Internet connection

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

  Solve problems, find wireless networks

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-finding-wireless-networks

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Tips for solving common driver problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-driver-problems

• Problem of not seeing list drop-down connection to the wireless network when checking connections network - pc windows 7.

  Problem of not seeing list drop-down connection to the wireless network when checking connections network - pc windows 7.

  I just installed a Belkin modem-router - which went well. Can I connect WiFi gadgets etc. I can also connect to the internet via a network cable to my pc. I also installed a belkin usb wireless adapter and in Device Manager, says it is enabled and works.

  My problem is, I have no way of choice get a WiFi PC to display in the list (from the notification area) and cannot get the pc to give me options to create a wi - fi connection. The more I get to try to do that is "unexpected error"!

  If someone could help on this - I would be very grateful

  Good news - update of my ongoing saga with this Belkin modem/router.

  Got the pc to see wi - fi now. It turned out to be the Zone Alarm! As the router has a firewall, I uninstalled Zone Alarm completely. Also, I went into the properties of belkin usb and checked it was the most recent drivers, it does not so I installed them.

  So far so good

  Thanks for the help

  TREV Smith

• I was scammed logmein123 and want to prevent anyone to access my computer via a wireless network

  original title: Logmein123 scam (im stupid)

  OK, I fell victim to the scam logmein123, I feel so stupid for what I did and im scared now, the only solace I have is that I bought what they were selling. I changed all my passwords and my ip address. I have no info on bank account or credit card on my computer and I always wipe my cookies and internet history every time I close a browser but I'm sure that I'm always high risk. can someone tell me how to check my computer to see if they still have access to me. IM also wondering if I can block anyone access to my computer via a wireless network, it would make me a little more secure. Finally, my can they still view my computer information, even if I ran a virus scan and no harmful viruses have been detected. BTW im using norton 360 as my virus protection.

  Hello

  the only way to be absolutely certain that your machine is not compromised is to backup your data and reinstall vista

• Impossible to connect a computer to the wireless network, I would like to first of all the automatic configuration service and I need advice.

  Article 861122 start WZC

  Unable to connect a computer to the network wirelee I firstly the WZC serviceand I need advice. TX

  Hello

  • Are you referring to Wireless Zero Configuration (WZC) Service?
  • What happens when you start the automatic Wireless Configuration Service?
  • You receive an error message?
   
  If you experience problems with the wireless network, reconfigure the Automatic Configuration Wireless for all wireless profiles automatically, click the fix this toolfrom the link below.
  Click run in the file download dialog box, and then follow the steps in this wizard.
  Error message when you try to run the Network Setup Wizard update for Windows XP Service Pack 2, Service Pack 3, or Windows XP Tablet PC 2005 Edition wireless
   
  See also:
  In Windows network connection issues
  http://support.Microsoft.com/kb/313242

• I got the error 0x8000FFFF: catastrophic error on windows XP pack 3 service. How can I fix this? I can do everything, but can not get the computer to detect wireless networks?

  I used disc cleanup and bang this error came. I don't know how or why. I can't use internet somehow. Normally, I connect to the internet with our home wi - fi connection. But my computer now sees not all networks wireless at all. I made sure the wireless switch is on and my son checked all settings network... still nothing. I am quite at a loss to solve this problem and do not have money to take right now to a pro. Help please?

  I also got the problem devices following system infor...

  Atheros AR5007EGwireless AVG mini port network adapter driver pnpdevice I\D ROOT/GR_AVGFWMP\0002 error code by using the V & D charger

  Atheros AR81 32PCI-E FastEthernet Controller AVG miniport driver ROOT\GR_AVGWMP | ooo1 failure using the V & D charger

  iecont.dll missing file

  iecontic.dll missing file

  ieuinit.inf not available

  Proxy disabled

  Disabled Access Manager

  Thanks a lot if you can help. The computer is a netbook with a screen 10 inch aspire. It's an older version, but is running windows xp with service pack 3, I use a laptop plus old to communicate with you and will continue to do so, to read your tips, thank you again.

  E-mail address is removed from the privacy *.

  Hello Sharon,

  You did it of any material changes or software on the computer before this problem?

  You can follow this link and check if the problem persists.

  In the Windows wireless network connection problems

  Hope the helps of information.
  Please post back and we do know.

• my laptop will not find my wireless network when I'm trying to relog. I then reboot the computer to make it work

  I can be on my laptop and the internet works fine, but if I close my laptop and come back, sometimes it will not open a session. When I try to connect to a wireless network, it will appear not all networks at all and I live in a condo and I usually pick mine as well as a dozen other choices. The laptop won't restart when I try to shut down or restart, it just goes in the part of the judgment of the process, but goes no further. I have to manually hold the power button to shut down the computer.

  Hello

  Maybe this can help.

  Assuming that the signal is strong, and that there is no noise in the electrical environment (http://www.ezlan.net/wbars.html ).

  Uncheck the box to the NIC of energy economy (I.e., do not leave the card save energy).

  There may be some variations on where is the energy saving setting.

  Here are a few examples, YMMV, look around your systems.

  Example, http://www.ezlan.net/example/powersave.jpg

  Example, http://www.ezlan.net/Win7/power_sav_wireless..jpg

  Example, http://www.ezlan.net/Win7/power_save_win7.jpg

  Example, http://www.ezlan.net/Win7/adv_power-sav.jpg

  ----------------------------

  Still a problem?

  Check support for the router and make sure that your using the latest firmware for the router.

  Check the support site for the manufacturer of the computer and make sure that you use the latest drivers.

  If the support site has a newer version of the drivers and installed current ask drivers the most up-to-date drivers use this method.

  Download the drivers and extract them to a folder of your choice.

  In Device Manager, right-click on the adapter.

  Click Update drivers and choose her browse my computer for drivers.

  Choose let me a list of choices, click on disk and point to the folder with the drivers.

• Switching between users on a computer on a wireless network

  I created several users on one of my computers with a D-Link card. The computer connect to the network wirelessly on the administrator log in only. When I switch to another user, the connection to my home network will and turn off all the seconds. How can I fix this problem?

  Open network and sharing Center, click manage wireless networks on the left and click on the profile types. Modify if needed.

  http://CID-25ab668da65c8fbe.photos.live.com/self.aspx/Windows%20images/ProfileTypes.PNG

  You may need to remove the first existing wireless profile and then re-create it after the configuration/reconfiguration of this setting.

• Internet problems with a computer Windows 7 wireless

  Hello. My problem is that I have an ACER with Windows 7 computer and I've had it for awhile (about a year or more). He never gave me no internet problem until a few days ago, when he started having connection problems. My computer has been without internet since two and a half days. Whenever I try to look for the problem, he tells me that the computer is connected to the router, but that router is not connected to the internet. I tried to restart the modem and the router several times without success. The thing is that, while my computer does not have internet, my cell phone and the computer of my partner (for laptop with Windows 7) do not seem have a problem using the same network of the internet, which makes me believe that the problem is in my computer.

  I have a SB5101U of Motorola SURFBoard Cable Modem and a NETGEAR RangeMax 150 wireless router.

  My computer uses an Atheros AR5B95 wireless network card. (My partner runs Realtek RTL8188CE wireless adapter)

  Would it be a virus or something? Because I've scanned my computer with my antivirus to find something wrong, but it does not yet detect. Please help me and thanks a lot for any help or advice you can give me.

  You have McAfee?  If so, see this "criticism" McAfee reviews -

  Some customers may experience a loss of network connectivity and/or errors in McAfee Security Center after a recent update

  You should make the fix McAfee, if necessary. There are corresponding communications for their enterprise products.

  I had to run their removal of McAfee Development tool a few times before and it caused a problem with the license if the PC was not connected to the internet during the abduction. Due cat of McAfee support reset their files in order to allow the relocation-reactivation. Here is their link cat - McAfee - media contains the link to the cat

  I got McAfee, but the connection has started working again on its own so I thought I was clear of problems. However, when I checked it says he was doing routine checks the updates in vain when I told it to do a manually. So stick with McAfee you don't follow their procedure of fix would have upgraded my PC at risk by not updated and, like other McAfee ads have since explained, the application did not refer to its database of threats correctly [and this could explain part of the variability of the symptoms of failure but all involved loss of internet connection]. Actually, I removed McAfee then installed Microsoft Security Essentials rather & my answer IE is faster I knew it [even though I had the Add-ons McAfee disabled for centuries].

• MacMini don't auto connect to the preferred wireless network when the router reboots

  My MacMini is located to join my favorite wifi network. Where I stay, there is usually a power failure close to a minute or two during the day.

  My setup is such that my MacMini running 24 x 7 with a backup uninterruptible but my router (AirPort Express) turns off during the power outage. When the router goes off, my Mac disconnects from the network which should, but now when my router turns, the MacMini reconnect to the preferred network.

  It shows the network preferred list, and when I manually click on this subject, it reconnects immediately without asking for password. But this will not happen automatically.

  If I restart my MacMini it reconnects very well. The problem occurs only when my MacMini is but my router restarts.

  To reproduce this problem on your side, just turn off your router and once your Mac disconnects from the network back on the router. See if your mac reconnects to your wifi fine.

  Any solution or advice for this problem?

  Thank you.

  Please test after taking each of the steps that you have not already tried it. Stop when the problem is resolved. Back up all data before making any changes.

  1. If possible, test at another network, such as a public access point or hotspot created by a mobile phone. Some Wi - Fi routers are not fully compatible with Apple devices. More specifically, the security mode for the network, as shown in the network preferences window, should be 2 personal WPA or WPA 2 Enterprise. If the router doesn't support either of these modes, it should be replaced with another.

  2. make sure that the network is on the list of favorites by following these instructions. It is important to read the article, as it is the starting point for further efforts to solve the problem. If you skip any step, the problem cannot be resolved. Make sure that the box marked

  Remember this computer has joined the network

  is checked.

  3 follow the instructions in this article to support.

  4. reset the PRAM.

  5. take note of all your parameters of connection Wi - Fi in the network preferences pane, then remove the connection in the connection list and re-create it with the same settings. This by clicking on the icon of the lowest sign from the list of connection, select Wi - Fi as the interface in the form that opens. Select join the other network in the network name menu, then select your network. Enter the password when you are prompted, and then save it in the keychain.

  6. in the menu location at the top of the network preferences window, select Edit locations. A sheet will fall. Click on the plus sign to create a new location. Give it the name of your choice. In the new location, set up the Wi - Fi service with the same settings that you used before. Click on apply and test.

  7. run the Keychain Access application. Find and remove all the network password AirPort elements that refer to the network. Make a note of the password first.

  8 turn off the Bluetoothand the test.

  9. reset the system management controller.

  10. This step should not be necessary, but he has been advised by the Apple Support in some cases, apparently as a solution for a bug. Open the energy saving pane in system preferences. If necessary, click the lock icon in the lower left corner to unlock the settings. When prompted, enter your administrator login password.

  Select the Power Adapter tab and uncheck the boxes marked

  Continued access to the Wi - Fi network

  and

  Enable the NAP...

  If it is present. Then, if the computer is a MacBook, select the stack tab and uncheck the box

  Enable the NAP...

  11. reinstall OS X.

• How can I configure my computer for a wireless network provider?

  is my windows XP computer, set up a new wireless network?

  If you mean, "How to connect to a wireless network", the first thing you must determine is whether your computer has a wireless adapter.

  Follow these steps:

  • Click Start, then click Run, and then type the following in the "Open" box and click OK
    Msinfo32.exe
  • After that fills the system information window, click your mouse in the system information window and select all (CTRL + A), copy (CTRL + C) and paste (CTRL + V) the information in your next reply.
  • Leaving open answer window, click on the + next to "Components" in the left pane of the system information window, then click on the + next to 'Network' and then click on 'fit '.
  • Once filled with right side of the system information window, click your mouse in the system information window and select all (CTRL + A), copy (CTRL + C) and paste (CTRL + V) the information in the response box, according to the information that you had put forward.

• Impossible to connect to the wireless network when the wireless Internet is filled to connect to the Local network

  I tried to fill the connection between my laptop Wi - Fi and an ethernet cable LAN via the connection to the Local network for my xbox 360. However, when the connections passed the wireless connection would show that it is disconnected and would not reconnect. When I tried to repeat the process sometimes the same thing happens sometimes it says that it is still connected.

  However, be that as it may, both times I could not load any page of the website from my laptop and xbox connect any.
  How can I create a network bridge and get the wireless internet to connect please?

  Any help to fix this would be appreciated,
  P

  This Microsoft Knowledge Base article might help: bridge may not work with a Non-Promiscuous Mode network card .

  If not, I recommend to delete the network bridge and enable sharing of Internet connection on the wireless network connection. Boulder computer Maven
  Most Microsoft Valuable Professional

• RDP to Windows 7 computer on a wireless network

  I am trying to connect through RDP on a windows 7, which is on a wireless network. I'm trying to connect by using the same account that has already connected to the computer, so I expect that the existing session should connect just without the wireless connection, closure, but not what I live. Y at - it a setting that I need to configure to allow the RDP connection to connect to an existing session without wireless, closing?

  Thank you

  Dan

  Hello

  Thanks for posting your query in Microsoft Community Forum.

  According to the description of the issue, I recommend you post your query in the TechNet Forums. TechNet is watched by other computing professionals who would be more likely to help you.

  TechNet Forum

  http://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro

  Hope this information is useful.

• DeskJet 3522 printing scanning copy: hp dj 3522 disconnects wireless network when the printer is turned off

  I have the above printer.  As indicated, it disconnects from the network when it is off.  I have a Westell A90 750014, MAC, disabled filtering router, the printer has been added in the MAC filter table, and in the wireless station status is listed as "associates".  When I reconnect once disconnected from the network, I am able to reconnect using the simple push button config method.  Can someone tell me a way to feel connected to the wireless network.  Thank you very much for your help.

  Hi @scotty1963

  I understand that you have problems with your printers wireless function despite all your efforts. I'm sorry to hear that, but it will certainly do everything I can to help

  Please use the following document to solve the problem and I would like to know the results of your efforts; The printer keeps Wi-Fi connection.

  I hope this helps.

• Photosmart C4780: Impossible to reconfigure the network on Photosmart C4780

  When the upgrade of our wireless home network, our router has been updated, so I need to go to a re - configure our printer for the new network SSID and password only I can't.

  WPS does not work, use the push button or the PIN method.

  If I plug the printer via the USB port, using the HP configuration utility (System Preferences > print and fax > utility > Open Printer Utility > devices > new device setup) the printer is recognized, but the Wizard allow me to advance to the configuration of the network directly - settings I get a message telling me that "The selected device is already Set Up.

  I tried the printer hard reset, I downloaded the drivers directly, I tried searching for SSID the printer (doesn't seem to be a radio) and I factory reset the printer wireless settings.

  I'm puzzled.

  Take a look at the attached screenshots - I'd love to hear that you'e got a solution for me. I wouldn't have to buy a new printer.

  Legend: If only I could go to these points on the left...

  

  ... But I can not...

  

  Please provide detailed information gabeuscorpus.

  That the software you are trying to use to set up the printer is for an older Mac.

  I would uninstall the old software. Yosemite drivers are installed by the Apple updates and the HP utility must not have been installed. Monofunctional and HP - uninstalling the software of the printer multifunction printers.

  Set up the ad-hoc connection has nothing to do with the router. We use the Adhoc to test the operation of the equipment and the operating system. Because you see not the printer in the list to connect to, we have to solve the equipment before attempting to reconfigure the printer to the router.

  Run the wireless network on the printer Test.

  Press the Scan button (it also the wireless menu button)
  Select wireless settings
  Select the wireless network running Test.

  Check next wireless on watch Pass and work wireless shows Pass.

  Let me know.

  I'll send you another step to try in a private message.
  In the forum next to your handle name simply click on the envelope to see.

  I would like to know what the results are.

  Thank you.