connection to server failed Error 0x800CCC0E
The connection to the server has failed. Account: 'mail.q.com', server: 'mail.q.com', Protocol: POP3, Port: 587, secure (SSL): Yes, Socket error: 10060, error number: 0x800CCC0E
For more information you need we say what e-mail program you use.
Tags: Windows
Similar Questions
-
Outlook express - section server failed, error Ox8OOCCCOE - can it be fixed?
When I try to send or receive mail through Outlook Express it says connection to the server has failed - error 10060-ProtocolSMTP Socket, Port 25 secure (SSL) Yes-Error 0x800CCC0E anyone have an answer?
- This account has already worked?
- Please post any error message in its entirety. You can left click on it to highlight then right click to copy and then paste in this thread.
-
Client PCoIP throws "view connecting to server communication error."
Hello
We have a Horizon view 6. Connecting customers PCoIP (Wyse/Samsung) get "View connection server communication error" while there is no problem connecting PC/iPad/iPhone with Horizon View Client or web browser.On client PCoIP I tried checking "do not verify server identity certificates" and also tried to put 4172 or 443 or 80 on the port for the view connection server, but they get the same error.
Any help would be appreciated, thanks.
It has been resolved
Our internal certification authority using the certificate with RSASSA-PSS signature algorithm; Zero clients do not support this type of certificate. We changed it to emit SHA RSA instead.
And also on zero Clients make sure that "Warn before you connect to untrusted servers" has been selected.
-
Connection to the server fails error # Ox800CCCOE
When you try to open Outlook Express I get the following message: Outlook Express: find the host to connect to "pop.charter.net. Connection to the server has failed. I contacted my internet provider and they said that the problem is not with them but with Microsoft.
Hello Fitzgerald
Your post is a duplicate of the OP's original question. Having the same problems? If so, then some of the steps suggested to try this forum are listed below.Here are things to try1. the outgoing (SMTP) server requires authentication.
you use Outlook Express you must check the box "my server requires authentication".2. If you are behind a firewall, we will be unable to authenticate.
If you have a personal firewall, try to reduce security or disable it to see if it is causing the problem.
(Remember to reactivate after the test)3. your SMTP (outgoing mail) may be blocked.
Here's how to test:
A. go in Start-> Run-> type: cmd
B. at the prompt type: telnet smtp.gct21.net 25
(include spaces exactly as shown above)C. wait a few seconds. "You should see the following: ' 220 mail4.gct21.net ESMTP. This means that it isnotblocked.
D. Si you do not see this message, your SMTP is blocked.=======================================================================
Disable analysis in your e-mail anti-virus program. It is a redundant layer of protection that devours the CPUs, slows down sending and receiving and causes a multitude of problems such as time-outs, account setting changes and has even been responsible for the loss of messages. Your up-to-date A / V program will continue to protect you sufficiently. For more information, see:
http://www.oehelp.com/OETips.aspx#3Why you don't need your anti-virus to scan your email
http://thundercloud.NET/infoave/tutorials/email-scanning/index.htmNote that for some AV programs, it may be necessary to uninstall the program and reinstall in custom Mode and uncheck analysis when the option is the result of e-mail messages.
If the proposed measures do not apply to or do not address the issue that you are facing so please create your own thread with your specific problem and provide as much information as possible. This will allow the development of the thread directly relate to problems you encounter. Thank you
How to start your own, new thread
http://answers.Microsoft.com/en-us/page/FAQ#faqGettingAnswers5
-
Shockwave Flash Crash and "running the server failed WMP".
Hello
I have a laptop HP that used Vista. I recently decided to install Windows 7 on it a week ago, but I've had problems since.
I find that as a first step, I would like to watch YouTube and he played very well. However, after a few hours, Youtube should take a break and pop would be a mistake, saying that Shockwave Flash broke down. This error occurred on all browsers (IE, Firefox, Opera, Chrome etc.) and the mistake of Shockwave Flash would be visible on all streaming media sites.
I decided to play music on WWP but she also crashed and said that "Server execution failed". So I decided to restart my computer and everything worked again. My videos played WWP fine and so does Youtube. I decided to continue to watch videos on youtube and listen to music on WWP until both started to freeze and the error occurred again. I would continue to reboot my computer and the same trend happen. Obviously, the error for Shockwave Flash Plugin crash and error running server on WWP are linked so I hope someone can help me solve this problem.
I tried re-installing and do a lot of things that I found here on the forum to see if they can help, but none of the solutions worked. If anyone can help me, I really appreiate it! I'm not a fan of Windows 7 so far, especially with these errors, so I hope to fix it soon!
Thank you so much in advance!
Hi fallenenvym,
1. try to uninstall Adobe flash player and shockwave player from your computer and reinstall on the computer after restarting your computer.
To uninstall the Flash player and shockwave player, you need to follow the link below.
http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program
Follow the links below to download the Adobe flash player and shockwave player on your computer.
http://kb2.Adobe.com/CPS/142/tn_14224.html
http://kb2.Adobe.com/CPS/191/tn_19166.html
http://kb2.Adobe.com/CPS/141/tn_14157.html
2. for the execution of the server failed error
a. Click Start and in the search bar type cmd.exe
b. right-click on cmd.exe and click Run as administrator
(c) in the command prompt, type the following command
net localgroup "Administrators'"NT Authority\Local Service"/ Add
d. press on enter and restart the computer
With regard to:
Samhrutha G S - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
-
I get a "Server dynamic link server failed" error message when you try to add projects to adobe Media Encoder. CS6 update to date according to the update from adobe. Tried a reboot, still nothing. This device has worked until about a week and a half. Adobe wants to phone not provided a suite software $1,000...
Published by: Kevin Monahan
Reason: Please keep the title of your message short and concise for research purposes.
Kyle, I solved my problem with an other posts on this forum. It turned out to be the NVidia nView Desktop Manager applet in the control panel. It has been activated, and I believe that it has been activated for a long time. I don't know if something in a recent update of broke things, but as soon as I disabled the Desktop Manager, my dynamic link started working again in all aspects. Give it a try. Good luck.
See you soon,.
Shane
-
Hi, I am probably doing something really basic and easy to fix but facepalmingly pls have patience with this n00b...
My emails with Crazy Domains Hosting has expired a couple of months, I've just managed to get it reconnected.
When I open Thunderbird once again, I kept getting the error msg "Failed to connect to server".
I checked all the settings for the account, they are all fine as far as I KNOW. Updated to the latest version of Thunderbird, tried to restart the program and doesn't have the obligatory IT Crowd "troid torning it and turn it on again", still get the same message.Plaaaaiiss... Halllp!
Regardless of my fault for typing. What is important is that there is nothing in the DNS or whois on the domain.
Look at their own whois server it shows pending deletion, expired in April. http://www.crazydomains.com.au/WHOIS/littleredfoxdesign.com/#result
Until these public information are corrected your not likely to be able to connect because Thunderbird can not find the server. There is no DNS records to point to it.
-
check failed. There was an error connecting to server Apple ID.
check failed. There was an error connecting to server Apple ID.
What do you do when you receive this alert?
-
verification failed - there was an error connecting to server Apple ID.
Just upgraded to 10.11.4. Get this error when trying to login to icloud
Verification failed
There was an error connecting to server Apple ID.
I can sign in here with my id, I can sign in icloud via my web browser to my id.
What I can't do is connect from my imac (model 2015)
Where should I go form here?
I have exactly the same problem and I can check that if I create a new user on my MBP (current model of 15 "), I am able to use my Icloud account once again, but not under my main user. Thus, each suggestion found in the forums here:
- Step 2 review the deactivation
- Config of Flushing DNS or try another DNS server
- Uninstalling an Antivirus snake oil product, I do not use
did not help at all. But there must be something with my user account, the system itself seems to be fine as a new user account works with the same icloud account.
This can happen now reasons:
- I went to use the family option one or two months previously - unplausible that this has something to do with it
Console output for two seconds after clicking on login to icloud prefs: line 2 + y has at least 20 times with different Classes but the same error:
02.04.16 10:14:57, 409 akd [311]: NSURLSession/NSURLConnection HTTP load failed (kCFStreamErrorDomainSSL,-9807)
02.04.16 10:14:58, com.apple.preferences.icloud.remoteservice [984 947]: CGContextSetCompositeOperation: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.
02.04.16 10:14:58, com.apple.preferences.icloud.remoteservice [984 947]: CGContextClipToRect: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.
02.04.16 10:14:58, com.apple.preferences.icloud.remoteservice [984 947]: it has no sense to draw an image when [NSGraphicsContext currentContext] is zero. It is a programming error. Break on Sub _NSWarnForDrawingImageWithNoCurrentContext() to debug. This will be recorded only once. This may change in the future.
Next steps for me will be
- hoping someone here has an idea, so I don't have to wast hours for this
- try to restore a backup time new machine to a new user account (would be less work) - but this option I think that will lead to problems again. I'll let you know if it is a possible way to solve the problem.
- From a user account from scratch and selectively import settings - there is no alternative option that takes time. Usually, this is not necessary and one of the reasons why I use a mac - only not to reinstall Windows every 3 months...
-
Failed to connect to update server .__The error code is 12007
I am running Windows 7 and by using the wifi internet connection. The error occurs every time I turn on the computer and of course before I'm connected to the net. After that I connected the error window remains active until I close it.
* Title *.
Update failed. The update Module intercepted a mistake. Failed to connect to update server .__The error code is 12007. The server name cannot be resolved. __Woodymango,
If you are running Windows Update you get an error? Is this an error state that it is from Windows Update or is this another program that runs a program of automatic update?Perform a clean boot and see if the error returns. Post back with the results and INFO.
Mike - Engineer Support Microsoft Answers
Visit our Microsoft answers feedback Forum and let us know what you think. -
ORA-28547: connection to the server failed, probable Oracle Net admin error.
Dear all,
My11gR2 database on windows 2008 R2 Standard is in error "ORA-28547: connection to the server failed, probable Oracle Net admin error.
It's when I try to log on to the server itself
as:
SQL * more: Production of release 11.2.0.1.0 kills him Oct 8 05:43:03 2013
Copyright (c) 1982, 2010, Oracle. All rights reserved.
Enter the user name: sys/***@orcl as sysdba
"ORA-28547: failed to connect to the server, likely admin error Oracle Net.
This started happening when the server has been restarted. I don't know if I have to stop any service, as in some cases under Linux should be stopped service iptables.
The solution I found on most of the forums is to change in sqlnet.ora since '#SQLNET. AUTHENTICATION_SERVICES = (NTS) 'to' #SQLNET. AUTHENTICATION_SERVICES = (NONE)"and restart the receiver.
But even if it doesn't in my case.
Kindly help.
Best regards, Imran
Guys, there are 2 databases installed on the same server, to correctly configure the SID. Once set, I could see that the database is down and when starting it started working well.
Thanks for your efforts.
-
Original title: Family Tree Maker does not connect on the Web dashboard.
My Family Tree Maker 2009 does not connect to the Internet comes up with the message which is cannot authenticate the server, but it tells me that my version is up-to-date. He has always worked so far? Comes with the following message if I try to do anything that involves the net.
"Auntentication with the server failed.
Hi HelenTL,
You did changes to the computer before this problem?
If you have any software security & firewall installed, disable them temporarily and check if the problem persists.
Note: check to allow them back on the computer after you complete these steps.Hope the helps of information.
Please post back and we do know. -
MSVC ++ 2008 error "Failed to connect to server" error 0x800703FA and error 1601
Visat SP1 32-bit computer. Tried to install MS VC ++ 2008 redistributable and got
Unable to connect to the server. Error: 0x800703FA
MainEngineThread returns 1601
Hello
I suggest you to manually install the updates in a clean boot state and check if it works very well.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: After a troubleshooting follow step 7: reset the computer to start as usual
32-bit version was updated link
link to updated version 64bits
Concerning
-
As above, websites at random and many of those that I use, say "Connection server failed" and then I can't even go to the Web site. I use FF 35.01 on Linux Mint 17.1. This has never happened before... Pages work fine on another device or Chrome!
I found my problem!
I checked the link you gave me, but none of the error messages that are matched. So, I googled the error message, and he apparently had to do with the date of my computer. The date was one day! And what to do with some https sites... Here is how I fixed / solved my problem:
http://www.genuinescope.com/blog/sec_error_ocsp_future_response/But thanks for helping me narrow my problem!
-
Browsing databases of Virtual Center failed: could not connect to server NFC, can any body help me how to solve this problem please
Hi Mallik7, please try the following steps, you must succeed to solve the problem.
To connect a client to vCenter directly to the ESX host error-free work.
Files/etc/vmware/config the ESX host contain the lines:
------------------------------------
authd.soapServer = 'TRUE '.
prefvmx.consolidateDeleteNFSLocks = "TRUE" authd.proxy.vpxa - nfc = "vmware - vpxa:vpxa - nfc.
Authd.proxy.vpxa - nfcssl = ' vmware - vpxa:vpxa - nfcssl.
------------------------------------
This problem occurs when a carriage return is missing from/etc/vmware/config. To resolve this issue, go to edit/etc/vmware/config:
1 make a backup of this file from the path - / etc/vmware/config, by running the following command:
CP/etc/vmware/config/var/tmp /.
2. edit/etc/vmware/config so that there is a return transport after the line:
prefvmx.consolidateDeleteNFSLocks = 'TRUE '.
While he reads the following:
---------------------------------------------
authd.soapServer = 'TRUE '.
prefvmx.consolidateDeleteNFSLocks = 'TRUE '.
Authd.proxy.vpxa - nfc = "vmware - vpxa:vpxa - nfc.
Authd.proxy.vpxa - nfcssl = ' vmware - vpxa:vpxa - nfcssl.
---------------------------------------------
3. restart the management agent spend.
Note: Make sure that you are not in your environment name resolution problems.
Maybe you are looking for
-
When you take HDR, what advantage does different values of stop F offer. I seem to be able to set the values, and the results are similar. When should I use a value of 1 vs 3 worth?
-
sound does not work after you reinstall
Original title: I had to reinstall xp on my computer after doing so, I can not speaker working can anyone help, I can't get my speaker to work after reinstalling Windows xp, because they don't have any softwear with them
-
How to set the partition active windows 7 using the command line
I activated the system recovery partition, so the windows partition is disabled and I can't start Windows
-
Just how I'm a veteran disabled in a Veterans Administration Hospital course in order to keep your windows 7 locking up my computer and putting pop ups all over my screen. I have a Toshiba 1 years with a broken modem computer and so I can never go on
-
Creating cloud works only on mac
I have a new plan of cloud creative and downloaded lightroom, but it's not the full program and it does not work. I have no explanation for this problem, if someone can give a help? Thank you very much