Connection to the MDEX error. The data service associated with this editor is not properly configured.

Similar Questions

• The data necessary to complete this operation are not available at this time. (Exception from HRESULT: 0x8000000A)

  Original title: visual studio

  I had this problem

  The data necessary to complete this operation are not available at this time. (Exception from HRESULT: 0x8000000A)

  Hello

  If you get the error while trying to compile the program using Visual studio, we ask post you your request in the forum for better support.

  Visual studio Forum

  Hope this information helps.

• Means erasing a device as "logout" of the device identifier associated with this device Apple?

  Means erasing a device as "logout" of the device identifier associated with this device Apple?

  If an individual has forgotten to "disconnect", a device before removing the device, is that Apple ID automatically disconnected from the unit, or is it necessary to reconfigure the device with the existing Apple ID just so you can disconnect this Apple ID between the device and then erase the device?

  I found an article of Apple who deducts that wipe a device also signs the Apple ID, but article does precisely this.

  Thank you

  John

  WeaverJK wrote:

  Means erasing a device as "logout" of the device identifier associated with this device Apple?

  If an individual has forgotten to "disconnect", a device before removing the device, is that Apple ID automatically disconnected from the unit, or is it necessary to reconfigure the device with the existing Apple ID just so you can disconnect this Apple ID between the device and then erase the device?

  I found an article of Apple who deducts that wipe a device also signs the Apple ID, but article does precisely this.

  Thank you

  John

  What to do before you sell or give away your iPhone, iPad or iPod touch - Apple Support

• BlackBerry smartphones enter the username associated with this smartphone

  When I login with my ID blackberry an apper message telling to enter the user name associated with this smartphone

  Please help me

  In fact, it is not likely to help... to refer:

  • KB28429 "Please enter the username associated with this smartphone" appears by connecting to BlackBerry App World with a BlackBerry ID using a smartphone BlackBerry 7

  To paraphrase, what this means is that there is already a BB ID associated with this BB, and there is only one way to change the association ID BB to BB:

  • KB26694 How to change the BlackBerry ID on a BlackBerry smartphone or BlackBerry PlayBook Tablet

  Whereas a WIPE seems drastic, it is nevertheless the only way to change the ID of BB BB is associated.

  Good luck!

• Unable to connect to the web services server

  Unable to connect to the web services server.  It is a common error that you might see if you try to enable web services.  If you receive this message, try the following steps.

  For Officejet printers

  1. open the internet browser type printer IP address.

  2 should bring you to the status of the printer page.

  3. Select the tab network at the top.

  4. left side select IPv4 under wireless.

  5. under DNS address Configuration select manual DNS server.

  6. for favorite enter 8.8.8.8

  7. for alternate enter 8.8.4.4

  8. Select apply. You can get a warning saying that this could break the connection which is very good.

  9. turn the printer off for about 30 seconds and then try to enable web services.

  For Photosmart printers

  1. Enter the printer's IP address in a browser.

  2 Select the network at the top of the page.

  3. on the left, select network.

  4. Select Network (IP) address

  5. select manual DNS server

  a. manual Preferred DNS should read 8.8.8.8

  b. alternate DNS server should read. 8.8.4.4

  6. Select apply you could get a fair warning select OK

  I hope this helps!

• Pavilion 140 550 - t: unable to connect to the windows service

  Not sure if it's the good advice of post, but here goes.

  Just got the HP computer yesterday and installed Norton Security, Malwarebytes, and Windows Live Mail (do not like the version of Mail). Now, when I start it, I get "Unable to connect to the Windows Service" pop up and WLM crashes when I try to open it. What the DEVIL?

  Had the same problem on the one I just replaced. My laptop became the 'Group Policy' error thing, but I think I fixed it.

  Any suggestions? Windows is a joke!

  If it is Norton Security, then it's a firewall as well and firewalls blocking things, it's that they are supposed to do. So demand for three, you said that this is probably the cause.

  But if you do not want to test it, then try the system restore I've mentioned or reload the image origin, then just put in place the email again and see if it works without the other two installed, first to see if it will work with anything else in the picture.

• Unable to connect to the wifi service in my house, how can this be repaired?

  I have a dell laptop and I am trying to understand how to do this.  I enter the key of the service network and the message says that the network password must be 40-140-bit according to your network. It can be entered as ascii characters 13-5 or 10-26 hexadecimal characters? How can this be repaired?

  Hi Vickiloo06,

  ·         Did you do changes on the computer before the show?

  ·         What happens exactly when you try to connect to the wifi service, you receive error message?

  I suggest you to consult the following Microsoft Knowledge Base article and check if it works.

   

  Unable to connect to an access point wireless with Wi - Fi Protected Access update installed

  http://support.Microsoft.com/kb/821442

   

  How to troubleshoot wireless network connections in Windows XP Service Pack 2

  http://support.Microsoft.com/kb/870702

  I hope this helps.

• The same day as my expired Norton my internet connection icon says... unknown internet connection. The dependency service or group was able to start.

  the dependency of the orgroup faaied to start service unknown Internet connection.

  The same day as my expired Norton my internet connection icon says... unknown internet connection. The dependency service or group was able to start. I tried all the suggestions on this page. Can't even find the virus that the internet not connected. My livebox is grateful for the laptop please help

  Hello

  ·         You will remember to do recent changes on the computer before this problem?

  ·         Is the question only for the icon network did you try to open a Web page and check?

  ·         What suggestions do you have tried?

  ·         What is the exact error message?

  ·         Have you tried all the steps from the link?

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-networking/connection-status-unknown-the-dependency-service/92203623-b6d5-4301-8c79-00210abbcdd4

  I suggest you follow the steps mentioned below:

  Method 1:

  Follow the steps in the link and check if the problem persists:

  http://support.Microsoft.com/kb/943996

  Registry warning:

  This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the link below to follow the steps to back up registry:

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  Method 2:

  If the previous step fails, follow the steps in the link and check if the problem persists:

  http://support.Microsoft.com/kb/936211

  Method 3:

  If the previous step fails, reset WinSock and check if the problem persists:

  http://support.Microsoft.com/kb/811259

  Registry warning:

  This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the link below to follow the steps to back up registry:

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  Method 4:

  Temporarily disable the norton software (and any other security software) and the firewall on the computer as a test and check if this solves the problem follow the link below:

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  If disabling the antivirus software solves the problem, you may need to configure the settings of the antivirus as a result program.

  Note: make sure that you enable the antivirus software, other security and firewall programs.

  Warning: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

• BlackBerry Z10 difference between guest and the data service

  Hi all

  new user of the Z10, his job very well, I just had a small problem or issue. What is the difference between data services being on vs calls in roaming? I usually use wifi, but often the mode invite, can't do the acquisition of internet connection, even though I have the data service and a G full download available.

  Any help would be greatly appreciated!

  See you soon,.

  Excellent!

  Thanks for the reply "prompt"!

• problem connecting to the web services server

  I tried to download the latest updates of software/firmware for my all-in-one HP Photosmart Prem C310a.

  I can't get updates or activate Web Services because it still gives me the error message "problem connect to the web services server.

  I tried everything in the section of the Web of HPs site including connection via WPS - unsucessfully problems.

  I understand that you have found impossible to connect to the server error message on your printer. I would first disconnect the router and the printer for about 1 minute. I would plug the router first then the printer. I would then try to enable web services. If not successful, and you get the same error message. I'd follow these steps.

  1 obtain the IP address of your printer
  a. This can be done by pressing the icon on the printer wireless.
  2. Enter the printer's IP address in a browser.
  3. Select the tab network at the top of the page.
  4. on the left, select network.
  5. Select Network (IP) address
  6. select manual DNS server
  a. manual Preferred DNS should read 8.8.8.8
  b. alternate DNS server should read. 8.8.4.4
  7. Select apply you could get a fair warning select OK.

• air application connects to the web service although swf don't

  Hey there,

  I will try and be brief. We built a kiosk application in flash builder a pure as3 project. When we went to convert it into an air application all seems fine except for two issues. one is that we cannot use the Security.allowDomain("*"); Tagus. not much we comment on this possibility, but when we do we cannot connect to the web service that we use. Here is the error msg that we get:

  URL http://api.macys.com/v2/catalog/product?prodid=559529 & prodid = 586262 & prodid = 442702 & prodid = 5 39030 & prodid = 444331 & prodid = 593389 & prodid = 102435 & prodid = 519743 & prodid = 357571 & prodid = 128285 & prodid = 407708 & prodid = 209799 & prodid = 417917 & prodid = 498705 & prodid = 131858 & prodid = 597478 & prodid = 142166 & prodid = 470687 & prodid = 584020 & prodid = 167015 & prodid = 75190 & prodid = 432111 & prodid = 481224 & prodid = 549755 & prodid = 483429 & prodid = 414178 & prodid = 596422 & prodid = 385591 & prodid = 226280 & d = 142163 prodi

  ioErrorHandler: errorProductId: WebApplicationException

  ioErrorHandler: currentTarget: Error #2032: error in workflow. URL: http://api.macys.com/v2/catalog/product?prodid=559529 & prodid = 586262 & prodid = 442702 & prodid = 5 39030 & prodid = 444331 & prodid = 593389 & prodid = 102435 & prodid = 519743 & prodid = 357571 & prodid = 128285 & prodid = 407708 & prodid = 209799 & prodid = 417917 & prodid = 498705 & prodid = 131858 & prodid = 597478 & prodid = 142166 & prodid = 470687 & prodid = 584020 & prodid = 167015 & prodid = 75190 & prodid = 432111 & prodid = 481224 & prodid = 549755 & prodid =. 483429 & prodid = 414178 & prodid = 596422 & prodid = 385591 & prodid = 226280 & d = 142163 prodi

  Here is the error of charles:

  < error >

  < > 103 errorCode < / errorCode >

  types of arguments < message > Incorrect or combination < / message >

  < errorDetail > WebApplicationException() < / errorDetail >

  false < success > < / success >

  < / error >

  now, if we run just the swf file it connects very well. the only reason I need this app to be in a wrapper of the air is so that I can remove the print dialog box. otherwise, I'd create just an exe file.

  any ideas would be great!

  Thank you

  OK, found the problem!

  When we built the as3 project and we implement web service calls, we used post from get we caused problems. We have been connecting to a service of qa so that may have something to do with it. In all cases, we have changed the headers in the air application to get and it seems to work fine. Why would he works in the SWF and not the air who knows, but there are go!

  Thank you

  Jorge

• iPad connects to the cellular service

  After the update my iPad connects to the cellular service.  It is also much slower.

  You can't be alone on this, take a look at this other thread no cell service

  Did you do a hard reboot since the iOS upgrade?  As I mentioned in the other thread, if you can check the SIM card in another device that I think will prove that it is an iOS issue potentially and then try a reset settings network

  Settings - general - reset - network

• Move the "Data Service" volume ZFS on OSX Server

  Hi all

  I would like to move all the data service to a ZFS volume on a Mavericks OSX Server. This option can be found here:
  Server.app-> your server-> settings
  and is called "Data Service". As someone has already done this? It works or what I have to do a manual config, whenever the server restarts?

  Hi all

  So I'll answer my own question.  The answer is no, in fact, the app Server does not detect even the zfs volume.  I also try to cheat and to synchronize the/Library/Server volume ZFS and softlink then the original file to the copy of the zfs volume, but App Server would no longer work.

  Then Mac OS x still don't like ZFS much.

  I reformatted the drive with appleRAID, and then I could move everything using the button in the application.  I noticed that this original file is still there.  If it's really just an arrangement written somewhere.  Anyone know where this parameter is written?  Maybe I could get data on the ZFS drive sync and write this setting by hand.

• I am not able to browse the network. The workstation services and control of browser will not start. The event log shows the workstation service terminated with error code 2250.

  Internet, not able to browse computers on the network

  The computer has internet access, but I am not able to browse the network. The workstation services and control of browser will not start. The event log shows the workstation service terminated with error code 2250. Also in the event log Workstation reports: could not load RDR device driver. Cannot run the sfc in safemode, gives the 0x000006ba error, the rpc server is unavailable. Runs under normal windows, noticed in the registry last run: 0x000003e3 error code (try adding c:\windows\system32\drivesr\i81xnt5.sys to the dllcache)

  I'm puzzled.

  Hello

  I suggest you to send your request in the below link.

  http://social.technet.Microsoft.com/forums/en-us/itproxpsp/threads

• Vista problem: "failed to connect to the windows service, Windows cannot connect to the system event.

  I have reported this problem on my PC at home that connects to the internet. My laptop runs Vista Home Premium and I can't connect to the internet. I took my laptop on a trip, tried to connect to the wireless network that was free to the place we are. Could not connect, and after this initial test, the following is displayed after the start of "failed to connect to the Windows Service, Windows cannot connect to the system event notification service. This problem prevents limited users to logon to the system. As administratvie user, you can view the system event log to see why the service did not respond. "(have no idea how or what it means) when I go to the task bar you want to connect to a network, it is said:" the dependency service or group could not start"and if I go ahead and press"connect to a network"it says it can't find.  I search for computers on the network (who I'm sitting next to) and then try to diagnose the problem and it cannot. I have limited knowledge of this type of problem. Anyone have this problem and how to fix it?

  Hi ptkein,

  Thanks for posting your question on the Forums of Windows Vista.

  Option 1: You can download and install the latest network card drivers and see if that can solve the problem.

  Option 2: Follow the link below to fix network connection problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

  Option 3: Follow the link below to solve Internet connection problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

  Option 4: To verify if a third party application is a cause, follow this link (http://windows.microsoft.com/en-us/windows-vista/Advanced-startup-options-including-safe-mode) for this boot to the desktop using the safe mode with networking option and try to install the network. If the problem is resolved, you will need to perform a clean boot by following the steps in the following article to refine the exact source and isolate it: http://support.microsoft.com/kb/929135

  Let me know if it worked.

  Hope it will be useful.

  Thank you and best regards,

  Kadoch - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.