Connection using multiple tables
Hi there, hoping for some sense here. What I'm trying to do, is to have a login page that essentially looks at several tables. The following page uses a variable to display if the user name and password appear in one of the tables. The most common fields are email_address and password so I used them. How can I have the function of connection DW look at several tables. Is it one AND connect a RC or something else. I tried these bad results. Here is the code:' * Post the request to connect to this site.
MM_LoginAction = Request.ServerVariables ("URL")
If <>Request.QueryString "" then MM_LoginAction = MM_LoginAction + "?" + Server.HTMLEncode (Request.QueryString)
MM_valUsername = CStr (Request.Form ("user_Race"))
If MM_valUsername <>"" then
Dim MM_fldUserAuthorization
Dim MM_redirectLoginSuccess
Dim MM_redirectLoginFailed
Dim MM_loginSQL
Dim MM_rsUser
Dim MM_rsUser_cmd
MM_fldUserAuthorization = «»
MM_redirectLoginSuccess = "enter.asp".
MM_redirectLoginFailed = "LoginMainRR.asp".
MM_loginSQL = "SELECT Email_Address, password"
If MM_fldUserAuthorization <>"" then MM_loginSQL = MM_loginSQL & "," & MM_fldUserAuthorization
MM_loginSQL = MM_loginSQL & "RACING_REG AND DRIFT_REG AND OFFROAD_REG AND STREET_REG WHERE Email_Address =? AND password =? »
Set MM_rsUser_cmd = Server.CreateObject ("ADODB.Command")
MM_rsUser_cmd. ActiveConnection = MM_toyoracer_STRING
MM_rsUser_cmd.CommandText = MM_loginSQL
MM_rsUser_cmd. Parameters.Append MM_rsUser_cmd. CreateParameter ("param1", 200, 1, 255, MM_valUsername) ' adVarChar
MM_rsUser_cmd. Parameters.Append MM_rsUser_cmd. CreateParameter ("param2", 200, 1, 255, Request.Form ("pass_race")) ' adVarChar
MM_rsUser_cmd. Prepared = true
Set MM_rsUser = MM_rsUser_cmd. Run
If not MM_rsUser.EOF or not MM_rsUser.BOF then
"correspondence of username and password - this is a valid user.
Session("MM_Username") = MM_valUsername
If (MM_fldUserAuthorization <>"") then
Session("MM_UserAuthorization") = CStr (MM_rsUser.Fields.Item (MM_fldUserAuthorization). Value)
On the other
Session("MM_UserAuthorization") = «»
End If
If CStr (Request.QueryString ("accessdenied")) <>"" and then false
MM_redirectLoginSuccess = Request.QueryString ("accessdenied")
End If
MM_rsUser.close
Response.Redirect (MM_redirectLoginSuccess)
End If
MM_rsUser.close
Response.Redirect (MM_redirectLoginFailed)
End If
% >
No matter what direction here would be appreciated... either a response or pointed article somewhere.
Hi Dooza,
It worked without a doubt. 'S done it very little coding of SQL in Access. If someone does not want to go that route this right encoding in DW with session variables carrying the fields username and password on the next page also works very well!
< %="">< br="">' * asked to validate to connect to this site. < br=""> MM_LoginAction = Request.ServerVariables ("URL") < br=""> if Request.QueryString <> >"" then MM_LoginAction = MM_LoginAction + "?" + Server.HTMLEncode (Request.QueryString) < br=""> MM_valUsername = CStr (Request.Form ("user_Race")) < br=""> MM_valUsername so <> >"" then < br=""> MM_fldUserAuthorization Dim < br=""> MM_redirectLoginSuccess Dim < br=""> Dim MM_redirectLoginFailed < br=""> Dim MM_loginSQL < br=""> Dim MM_rsUser < br=""> Dim MM_rsUser_cmd < br=""> Dim MM_mtype
MM_fldUserAuthorization = ""< br=""> > MM_redirectLoginSuccess = "enter.asp" '.
MM_redirectLoginFailed = "LoginMainDGD.asp".
MM_loginSQL = "SELECT Email_Address password"< br=""> > MM_fldUserAuthorization so <> >"" then MM_loginSQL = MM_loginSQL & "," & MM_fldUserAuthorization < br=""> MM_loginSQL = MM_loginSQL & "OF Email_Address WHERE DRIFT_REG =?" AND password =? »< br="" >="" set="" mm_rsuser_cmd="Server.CreateObject">
MM_rsUser_cmd. ActiveConnection = MM_toyoracer_STRING< br="" >="" mm_rsuser_cmd.commandtext="MM_loginSQL">< br="" >="" mm_rsuser_cmd.="" parameters.append="" mm_rsuser_cmd.="" createparameter="" ("param1",="" 200,="" 1,="" 255,="" mm_valusername)="" '="" advarchar="">< br="" >="" mm_rsuser_cmd.="" parameters.append="" mm_rsuser_cmd.="" createparameter="" ("param2",="" 200,="" 1,="" 255,="" request.form("pass_race"))="" '="" advarchar="">< br/>="" mm_rsuser_cmd.="" préparé="true">< br="" >="" set="" mm_rsuser="MM_rsUser_cmd.">
If Not MM_rsUser.EOF or not MM_rsUser.BOF then < br=""> ' match username and password - this is a valid user
Session("MM_mtype") = "Drift" < br=""> Session("MM_Username") = MM_valUsername < br=""> if (MM_fldUserAuthorization <> >"") then < br=""> Session("MM_UserAuthorization") = CStr (MM_rsUser.Fields.Item (MM_fldUserAuthorization). Value) < br=""> Else < br=""> Session("MM_UserAuthorization") = ""< br=""> > End If < br=""> If CStr (Request.QueryString ("accessdenied")) <> >' ' and then false < br=""> MM_redirectLoginSuccess = Request.QueryString ("accessdenied") "."
End If
MM_rsUser.close
Response.Redirect (MM_redirectLoginSuccess)
On the other
MM_loginSQL = "SELECT Email_Address, password"
If MM_fldUserAuthorization <> "" then MM_loginSQL = MM_loginSQL & "," & MM_fldUserAuthorization
MM_loginSQL = MM_loginSQL & "OFFROAD_REG WHERE Email_Address =? AND password =? »
Set MM_rsUser_cmd = Server.CreateObject ("ADODB.Command")
MM_rsUser_cmd. ActiveConnection = MM_toyoracer_STRING
MM_rsUser_cmd.CommandText = MM_loginSQL
MM_rsUser_cmd. Parameters.Append MM_rsUser_cmd. CreateParameter ("param1", 200, 1, 255, MM_valUsername) ' adVarChar
MM_rsUser_cmd. Parameters.Append MM_rsUser_cmd. CreateParameter ("param2", 200, 1, 255, Request.Form ("pass_race")) ' adVarChar
MM_rsUser_cmd. Prepared = true
Set MM_rsUser = MM_rsUser_cmd. Run
If not MM_rsUser.EOF or not MM_rsUser.BOF then
"correspondence of username and password - this is a valid user.
Session("MM_mtype") = 'Offroad '.
Session("MM_Username") = MM_valUsername
If (MM_fldUserAuthorization <> "") then
Session("MM_UserAuthorization") = CStr (MM_rsUser.Fields.Item (MM_fldUserAuthorization). Value)
On the other
Session("MM_UserAuthorization") = «»
End If
If CStr (Request.QueryString ("accessdenied")) <> ' ' and then false
MM_redirectLoginSuccess = Request.QueryString ("accessdenied")
End If
MM_rsUser.close
Response.Redirect (MM_redirectLoginSuccess)
On the other
MM_loginSQL = "SELECT Email_Address, password"
If MM_fldUserAuthorization <> "" then MM_loginSQL = MM_loginSQL & "," & MM_fldUserAuthorization
MM_loginSQL = MM_loginSQL & "RACING_REG WHERE Email_Address =? AND password =? »
Set MM_rsUser_cmd = Server.CreateObject ("ADODB.Command")
MM_rsUser_cmd. ActiveConnection = MM_toyoracer_STRING
MM_rsUser_cmd.CommandText = MM_loginSQL
MM_rsUser_cmd. Parameters.Append MM_rsUser_cmd. CreateParameter ("param1", 200, 1, 255, MM_valUsername) ' adVarChar
MM_rsUser_cmd. Parameters.Append MM_rsUser_cmd. CreateParameter ("param2", 200, 1, 255, Request.Form ("pass_race")) ' adVarChar
MM_rsUser_cmd. Prepared = true
Set MM_rsUser = MM_rsUser_cmd. Run
If not MM_rsUser.EOF or not MM_rsUser.BOF then
"correspondence of username and password - this is a valid user.
Session("MM_mtype") = 'Racing '.
Session("MM_Username") = MM_valUsername
If (MM_fldUserAuthorization <> "") then
Session("MM_UserAuthorization") = CStr (MM_rsUser.Fields.Item (MM_fldUserAuthorization). Value)
On the other
Session("MM_UserAuthorization") = «»
End If
If CStr (Request.QueryString ("accessdenied")) <> ' ' and then false
MM_redirectLoginSuccess = Request.QueryString ("accessdenied")
End If
MM_rsUser.close
Response.Redirect (MM_redirectLoginSuccess)
On the other
MM_loginSQL = "SELECT Email_Address, password"
If MM_fldUserAuthorization <> "" then MM_loginSQL = MM_loginSQL & "," & MM_fldUserAuthorization
MM_loginSQL = MM_loginSQL & "STREET_REG WHERE Email_Address =? AND password =? »
Set MM_rsUser_cmd = Server.CreateObject ("ADODB.Command")
MM_rsUser_cmd. ActiveConnection = MM_toyoracer_STRING
MM_rsUser_cmd.CommandText = MM_loginSQL
MM_rsUser_cmd. Parameters.Append MM_rsUser_cmd. CreateParameter ("param1", 200, 1, 255, MM_valUsername) ' adVarChar
MM_rsUser_cmd. Parameters.Append MM_rsUser_cmd. CreateParameter ("param2", 200, 1, 255, Request.Form ("pass_race")) ' adVarChar
MM_rsUser_cmd. Prepared = true
Set MM_rsUser = MM_rsUser_cmd. Run
If not MM_rsUser.EOF or not MM_rsUser.BOF then
"correspondence of username and password - this is a valid user.
Session("MM_mtype") = 'Street '.
Session("MM_Username") = MM_valUsername
If (MM_fldUserAuthorization <> "") then
Session("MM_UserAuthorization") = CStr (MM_rsUser.Fields.Item (MM_fldUserAuthorization). Value)
On the other
Session("MM_UserAuthorization") = «»
End If
If CStr (Request.QueryString ("accessdenied")) <> ' ' and then false
MM_redirectLoginSuccess = Request.QueryString ("accessdenied")
End If
MM_rsUser.close
Response.Redirect (MM_redirectLoginSuccess)
End If
End If
End If
End If
MM_rsUser.close
Response.Redirect (MM_redirectLoginFailed)
End If
%>
Tags: Dreamweaver
Similar Questions
-
using multiple tables in a query in expdp clause
Is it possible to use the table of multiples in a query of expdp option? I'm doing the following and it fails with the message 'Invalid identifier' I use Oracle version 10.2.0.3 10
Settings (x.par)
************************
DIRECTORY = DATA_PUMP_DIR
USERID=XYZ/XYZ@DB1
DUMPFILE = X.DMP
LOGFILE = X.LOG
CONTENT = DATA_ONLY
TABLES = "TAB1".
QUERY = TAB1: "WHERE EXISTS (SELECT 1 FROM TAB2 WHERE TAB2.)" KEYID = TAB1. KEYID).
expdp parfile = x.par
Error
******
ORA-00904: "TAB1". "" KEYID ": invalid identifier
Please share your ideas
Thank you
Great, thank you very much.it very really worked.
-
I'm sorry for this stupid question. I know it's easy to do, and I tried to search through a search, but does not understand how to do it.
I'm trying to understand how in Oracle everything that I've done in MS Access for many years.
I need to update a column in a table with data from a column in another table.
In Access, I can just make
Update a.a in b
where a.link = b.link
The problem is b.link is unique and a.link is not unique, both in Oracle when I do
Update one
a.a value = (select b from b, a where a.link = b.link clause)
I get the error "row subquery returns more than one line.
I don't know if I need the place where is the clause, but adding, I still get the same error. I also have the same error if I do a select distinct.
Can someone help me?Hello
You can try this
Update a SET = AA (select b b where a.link = b.link)
Thank you
-
Connection to multiple devices sequence using FF Fieldbus Foundation open VFD
I am trying to connect to multiple devices on the same bus fieldbus. When I try
to connect using 'FF VFD open' admission that he is VFD tag (I left it as)
by default (0)). I can connect to a device, he questions and close the connection.
However, when I try to do the same with the following equipment, it errors on Open
VFD. The bus, everything seems to be connected correctly, I can query all devices
there and get their various identity papers, so I think it's to communicate all the
right.
I tried to connect using different, unique VFD tags. As I mentioned, I
have tried to disconnect and close the entire connection before trying to
to connect to another unit. I tried to connect to individual units with the
other disconnected from the bus and each will connect and work very well, so I
know that everyone is able to work-just not when other units are also present.Any idea is appreciated.
-
Win 7 crashes when you use multiple wifi connections.
Hi Shinmilla,
I have a problem with Win 7. How did it crash the system when you use multiple wifi connections. How can I stop this from happening?
Thank you.
Hi Triode888,It is not recommended to have multiple Wifi connections since signals can be contradictory and therefore it crashes.You can't have several active Wifi connections at the same time.Also, I suspect it might be caused by your network wireless itself. It could be automatically connected to a network of 'death '. So please check that your wireless network is disabled or no if you do not use.You have installed VMware or Virtual PC?If so, these programs will create a new network - please open the network and sharing Center and disable these additional networks.
1. open the network and sharing Center page in the control panel.2 confirm that it says multi-network right under the icon in the Middle, like the screenshot above.3. click on the link customize to the right of the first illustrated network, directly under the Internet icon, to display the window set the network location:4. move the window set the network location away, but let him open. (You'll need it in a minute, but at a time where it is otherwise inaccessible.)5. back on the network and sharing Center page, click on the link manage network connections (in the left task pane).6. in the network connections window, select the network adapter through which you get your Internet connection. (The views drop-down list, select Details; you want probably said something like network, unidentified in the status column.)7. click on disable this device network above (next to the big red X) button. Wait a few seconds for the chart on the network and sharing Center page to reflect the change.8. return to step #3 set network location window, and click on the merge or remove link network down locations.9. Despite Vista earlier assertion that he detected "multi-network," you will see probably only a single network in the window of merge or delete network locations:10. turn highlighted the only participant and then click on remove. (If there is more than one, you can delete all.)11. When you are finished, close the merge or delete network locations, and then close the window set the network location.12 return to the network connections window and with the adapter disabled network always highlighted the #6 step, click the option activate this device network (next to the big orange arrow) button.13. after 10-15 seconds of delay, your Internet connection should work now, signified by the absense of the treacherous of entries multiple networks in the network and sharing Center page:For more reference in http://social.answers.microsoft.com/Forums/en-US/w7network/thread/272b55ce-fb9a-423b-9a9a-8299f853cc29 lookAziz Nadeem - Microsoft Support -
Use with need to collect in bulk to insert records from multiple tables
Hello
I plsql record type with several tables with multiple columns. so when I used bulk collect with education for ALL. I want to insert records in multiple tables.
Please give me suggestions.
ForAll is designed to be used with a single DML statement, which may include dynamic SQL statements. However, I do not know what advantage this will give you your list iteration save several times, one for each table - especially since there is an air show with SQL dynamic.
Example 1 (dynamic SQL):
begin
...
forall i in vRecList.First..vRecList.Last
execute immediate '
begin
insert into Table1 (Col1, Col2, Col3) values (:1, :2, :3);
insert into Table2 (Col1, Col2, Col3) values (:1, :2, :3);
end;' using vRecList(i).Col1, vRecList(i).Col2, vRecList(i).Col3;
end;Another approach that I should work (but not tested) is using to insert all the Scriptures and based record inserts, but you need to try on your version of Oracle forall has changed between the versions. In this case vRecList must be compatible with the Table % ROWTYPE and Table2% ROWTYPE type.
Example 2 (insert all):
begin
...
forall i in vRecList.First..vRecList.Last
insert all
into Table1 values vRecList(i)
into Table2 values vRecList(i)
select 1 from dual;
end; -
RICs when MergeTable using with the names of multiple tables
Hello world!
I just saw, as v11 OWM MergeTable media with the names of multiple tables. As I couldn't find anything in the documentation, here's a question:
It also means, that RICs are automatically taken into account regarding the order of INSERTS/CHANGES/DELETES?
That would actually really great and simplify the merge of our application mechanism a lot.
Kind regards
Andreas
Hi Andreas,
This feature works the same MergeWorkspace, but with a smaller set of tables. Tables will always be merged into the order of the child table first, then the parent tables. However, foreign key constraints are not validated until all tables have been merged. This would prevent a mistake to be triggered when the child table merging before the parent merging table data in the parent workspace.
Kind regards
Ben
-
Connect to multiple instances of a script vCenter?
How can I connect to multiple instances of a script vCenter without going through separate-entry sequences of credentials or credentials on disk storage?
I need to browse through a table of the vCenters and run scripts against each of them. They are not related, but the same credentials must be valid on all instances.
It would be great if there was also a way of parallelization of this job such as each returned only thread STDOUT is it speeding up the script.
All suggestions are welcome, I can see some tips using PowerShell, but I need to do it in Perl.
Thank you
Stephen
You get close, you are missing just a few required modules. Here is the final excerpt that will work for you:
use strict;
use warnings;
use VMware::VILib;
use VMware::VIRuntime;{eval
My $vim = Vim::login (service_url-online $url, user_name => $username, password-online $password).
My $vms = $vim-> find_entity_views (view_type-online 'VirtualMachine');
{foreach(@$VMS)}
Print $_-> name. "\n";
}
};
Si ($@) {}
Print $@. "\n";
}Make sure you put things highlighted in bold, it's what you have in your Perl script. I checked on the VMAs, but I'm sure it'll work on Windows as well.
You're right, the documentation can be better... If one of the reason, VMware has created all these routines support auxiliary, is to abstract the complication of the API. They also assumed that you'd be connectingn to a single host or vCenter simultaneously. All that falls on these basic configs, it will take your own code/etc. and where watching is that the first part of the challenge
Good luck
-
Tree of SQL on multiple tables
Hi gurus,
I have a question about the trees of building sql on multiple tables.
It's the exit, I hope:
This is the situation: I have 4 table which can be forced to key foreign and all build toghether in a tree.0 - 10, 'Company Blue1', 0 -- 101, 'Part Blue1', 10 --- 1001, 'Accounting Blue', 101 ---- 10001, 'Hans Mueller', 1001 --- 1002, 'Special Problems Blue', 101 ---- 10002, 'Stephen Meyer', 1002 ---- 10003, 'Carlos Anceto', 1002 -- 102, 'Part Blue2', 10 --- 1003, 'Information Technology Blue', 102 ---- 10004, 'Tobias Tries', 1003 - 20, 'Company Red1', 0 -- 201, 'Part Red1', 20 --- 2001, 'Accounting Red', 201 ---- 20001, 'Carl Van Deser', 2001 ---- 20002, 'Geromel Boats', 2002 - 30, 'Company Green1', 0 -- 301, 'Part Green1', 30 --- 3001, 'Accounting Green', 301 ---- 30002, 'Peter Finnighan', 3001 --- 3003, 'Special Problems Green', 301 ---- 30001, 'Loui Van Ecke', 3003
The problem is that I do not know how in alle concate these values and using the connection by the clause that creates this treeTable1: tbl_company (c_id, company_name) Values: 10, 'Company Blue1' 20, 'Company Red1' 30, 'Company Green1' Table2: tbl_company_parts (cp_id, part_name, company_id) Values: 101, 'Part Blue1', 10 102, 'Part Blue2', 10 201, 'Part Red1',20 301, 'Part Green1',30 Table3: tbl_departments (d_id, dept_name, part_id) Values: 1, 'Accounting Blue', 101 2, 'Special Problems Blue', 101 3, 'Information Technology Blue', 102 4, 'Accounting Red',201 5, 'Accounting Green',301 6, 'Special Problems Green',301 Tablemployees (e_id, dept_name, department_id) Values: 1, 'Hans Mueller', 1 2, 'Stephen Meyer', 2 3, 'Carlos AncetoÄ, 2 4, 'Carl Van Deser',4 5, 'Geromel Boats', 4 6, 'Loui Van Ecke',5 7, 'Peter Finnighan',6 8, 'Tobias Tries',3
Hi Tobias,.
It was not exactly how id should be calculated, but this example you get:
SQL> create table tbl_company (c_id, company_name) 2 as 3 select 10, 'Company Blue1' from dual union all 4 select 20, 'Company Red1' from dual union all 5 select 30, 'Company Green1' from dual 6 / Table created. SQL> create table tbl_company_parts (cp_id, part_name, company_id) 2 as 3 select 101, 'Part Blue1', 10 from dual union all 4 select 102, 'Part Blue2', 10 from dual union all 5 select 201, 'Part Red1',20 from dual union all 6 select 301, 'Part Green1',30 from dual 7 / Table created. SQL> create table tbl_departments (d_id, dept_name, part_id) 2 as 3 select 1, 'Accounting Blue', 101 from dual union all 4 select 2, 'Special Problems Blue', 101 from dual union all 5 select 3, 'Information Technology Blue', 102 from dual union all 6 select 4, 'Accounting Red',201 from dual union all 7 select 5, 'Accounting Green',301 from dual union all 8 select 6, 'Special Problems Green',301 from dual 9 / Table created. SQL> create table tbl_employees (e_id, emp_name, department_id) 2 as 3 select 1, 'Hans Mueller', 1 from dual union all 4 select 2, 'Stephen Meyer', 2 from dual union all 5 select 3, 'Carlos Anceto', 2 from dual union all 6 select 4, 'Carl Van Deser',4 from dual union all 7 select 5, 'Geromel Boats', 4 from dual union all 8 select 6, 'Loui Van Ecke',5 from dual union all 9 select 7, 'Peter Finnighan',6 from dual union all 10 select 8, 'Tobias Tries',3 from dual 11 / Table created. SQL> select coalesce 2 ( case when e.department_id is null then null else 3 trunc(d.part_id,-2) * 100 + dense_rank() over (partition by d.part_id order by e.e_id) 4 end 5 , trunc(d.part_id,-2) * 10 + dense_rank() over (partition by d.part_id order by d.d_id) 6 , p.cp_id 7 , c.c_id 8 , 0 9 ) id 10 , coalesce 11 ( e.emp_name 12 , d.dept_name 13 , p.part_name 14 , c.company_name 15 ) name 16 , coalesce 17 ( trunc(d.part_id,-2) * 10 + dense_rank() over (partition by d.part_id order by d.d_id) 18 , d.part_id 19 , p.company_id 20 , case grouping(c.c_id) when 0 then 0 end 21 ) parent_id 22 from tbl_company c 23 , tbl_company_parts p 24 , tbl_departments d 25 , tbl_employees e 26 where c.c_id = p.company_id 27 and p.cp_id = d.part_id 28 and d.d_id = e.department_id 29 group by rollup 30 ( ( c.c_id,c.company_name) 31 , ( p.cp_id,p.part_name,p.company_id) 32 , ( d.d_id,d.dept_name,d.part_id) 33 , ( e.e_id,e.emp_name,e.department_id) 34 ) 35 order by c.c_id nulls first 36 , p.cp_id nulls first 37 , d.d_id nulls first 38 , e.e_id nulls first 39 / ID NAME PARENT_ID ---------- --------------------------------------------------------------------------------- ---------- 0 10 Company Blue1 0 101 Part Blue1 10 1001 Accounting Blue 1001 10001 Hans Mueller 1001 1002 Special Problems Blue 1002 10002 Stephen Meyer 1002 10003 Carlos Anceto 1002 102 Part Blue2 10 1001 Information Technology Blue 1001 10001 Tobias Tries 1001 20 Company Red1 0 201 Part Red1 20 2001 Accounting Red 2001 20001 Carl Van Deser 2001 20002 Geromel Boats 2001 30 Company Green1 0 301 Part Green1 30 3001 Accounting Green 3001 30001 Loui Van Ecke 3001 3002 Special Problems Green 3002 30002 Peter Finnighan 3002 22 rows selected.
Kind regards
Rob. -
3070 connectivity problem - multiple Accespoints with the same SSID
Hi all
I have a problem with my printer HP Deskjet 3070 printer all-in-one.
I have 2 accespoints with the same SSID for better coverage of the pit of the wireless home network.
For some reason any my HP printer keeps losing wireless connection when the 2 accespoints are rising.
I use a different frequency for the 2 accespoints channel and it works fine with all other wireless devices.
I did that a DHCP are used, r, but in fact it doesn't matter because the printer uses a static IP (192.168.0.3)
When the two AP is the printer loses wirelesss connectivity. (The blue led will blink)
If I take one of the accespoints offline, the printer becomes available.
Is this a problem on my end or a problem of software/firmware printer?
Kind regards
-eth0
Lol this is not very clear to me?
But it is very good that we continue here:
-
web pages of Windows vista won't load using multiple browsers.
Windows Vista, 32-bit.
Card mother with an AMD processor - built Gigabyte in 2009.Computer has worked for a few years, however, now, he can not complete the loading of most web pages.
Using multiple browsers (IE, Firefox and Chrome), we see the same behavior - web pages do not just end.
Sometimes update gets more of a page - but for videos (youtube and other sites) - it is almost impossible to load a full clip of more than 2 minutes.Ping/tracert works very well.
If passing through the VPN + desktop remotely, things work very well (this confirms that he is not the access provider when you use remote desktop, we are no longer local + all device drivers which could be the problem).
Windows Update, seems to work very well.Download files from a web page, does not work.
The computer is currently connected via Ethernet (not wireless).
We have tried this on two different networks, so it is not associated with ISP.We tried to connect a USB network adapter - thinking it was hardware related, but that has not changed anything.
We have tried to start in safe mode with networking - and it still does not work (so probably not the program antivirus - mcafee).
I was able to get a live LInux OS running on the pc, and he had no problem loading the pages/videos, ect - what is not strictly material.
I tried using some of the Netsh command to reset tcp/ip stack - but they don't solve the problem.
I do not think that it will fix a Vista startup repair, but I advise him to try to do.
I'm looking for any other suggestions in addition to switch to Linux full time.
Thank you!
Hello
Method 1:
I suggest to perform a restore of the system and check if it helps.
What is a system restore.
Follow the link below and check if that helps.
http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore
Method 2: Reset TCP/IP.
Follow the link below and reset the winsock TCP/IP settings and check if that helps.
How to reset the Protocol Internet (TCP/IP)
http://support.Microsoft.com/kb/299357
http://support.Microsoft.com/kb/811259
Let us know if it helps.
-
To create an interactive report in the apex by selecting from multiple tables
Hi, I am creating an interactive report by selecting from multiple tables.
SELECT w.FIRST_NAME as name, w.SURNAME as name, i.ROAD Road, i.DATE_OF_INC as DATE_OF_INC, S.STATEMENT as a STATEMENT OF Declaration
JOIN THE
WITNESS w
ON w.witness_id = s.FK1_WITNESS_ID
JOIN THE
Incident I have
WE
i.incident_no = w.FK1_INCIDENT_NO
JOIN THE
user_station ps
ON ps.station_id = i.nearest_station_id
JOIN THE
the user in.
WE
in. STATION_ID = ps.station_id
WHERE po.officer_id = 1
by I continue to encounter this error "the report query requires a unique key to identify each row. The supplied key cannot be used for this query. Please change the report attributes to define a unique key column. "ORA-01445: cannot select ROWID from where sample, a join without key preserved table view '
So I googled around and found that in the attibutres tables report, I need to change the "LINK" COLUMN so first, I changed "Link to custom target", but the report is so I changed it to "Exclude link Clolumn" again, the report didn't report and I STILL got a blank page with only the tabs.
I wonder you can not create a report by selecting from multiple tables?
If you can please I need your help.
Thank you
You can, but in this case, it might be easier to build your report tables that are joined Oracle views and then build your report out of the newly built sight...
Or wrap a selection around your selection with joins, and then make the where clause on the external selection...
Thank you
Tony Miller
Software LuvMuffin
Ruckersville, WILL -
Experts,
I'm trying to create a YOUNG refreshable ON COMMIT MV (xyz) using a table (circuit) and quickly updateable on validation MV (abc), but get an error:
SQL error: ORA-12054: cannot set the attribute ON COMMIT refresh for the materialized view
12054 00000 - "cannot set the refresh attribute COMMIT for the materialized view.
* Cause: The materialized view did not meet the requirements for update to
moment of validation.
* Action: Specify only valid options.
1] MV abc
= MV abc defined as below =.CREATE MATERIALIZED view abc_MV
Immediate CONSTRUCTION
REFRESH QUICKLY YOU COMMIT using constraints of trust
WITH ROWID AS SELECT n.*,.
n.ROWID noderowid
node n
where n.nodetype in (1610000069,1610007267);
-Above works OK and MV connect you on table node is created successfully
=====================================================
[ 2] Circuit Board
======================================================
CREATE MATERIALIZED VIEW LOG ON Cramer.Circuit WITH SEQUENCE, ROWID ( ) -all columns of table ofcircut parentheses
INCLUDING THE NEW VALUES;
-More top works OK and MV connect you on table circuit is created successfully
======================================================
[3] trying to create MV xyz
======================================================
CREATE MATERIALIZED VIEW LOG ON cramer.abc_MV WITH SEQUENCE, ROWID ( ) -all columns of abc_MV brackets
INCLUDING THE NEW VALUES;
-Above works OK and log on ABC MV MV gets created successfully
-Problematic step below
Xyz_MV CREATE MATERIALIZED VIEW
IMMEDIATE CONSTRUCTION
REFRESH QUICKLY YOU COMMIT using constraints of trust
AS
SELECT c., c.rowid circuit_rowid, n.rowid tr_rowid
the circuit c, abc_mv n
where circuit2startnode = n.nodeid
and c.rpplanId = n.rpplanId;
==========================================================Clues on how to solve this problem and make quickly updatable ON Commit MV xyz
Thanks in advance.
Chanchal,
If you can read my original post carefully you may have noticed that all these restrictions will not apply in my case.
All,
In any case I found the solution to my problem.
There are a few additional restrictions for materialized views multilayer
Additional Restrictions for master materialized views
The following types of materialized views may not be masters of editable materialized views:
ROWID
materialized views- Complex materialized views
- Read-only materialized views
I've updated the underlying MV abc below and everything worked like a charm
CREATE MATERIALIZED view abc_MV
Immediate CONSTRUCTION
REFRESH QUICKLY YOU COMMIT using constraints of trust
IN SELECT
n.*, n.rowid noderowid, nt.rowid nodetyperowid
the node n, nodetype_m nt
where n.node2nodetype = nt.nodetypeid
and nt.nodetypeid in (1610000069,1610007267);
Note: To ADD a join without which I was getting error below (although had primary key on the table of the node)
SQL error: ORA-23415: materialized view log for "NODE" does not save the primary key
23415 00000 - "view the log for materialized \"%s\".\"%s\"does not save the primary key.
* Cause: A primary key materialized view is refreshed quickly, but the
The materialized view log does not record the primary key information.
* Action: Use CREATING MATERIALIZED VIEW LOG... Command to add a PRIMARY KEY to
start recording of the primary key information in the materialized view
Newspaper.
-
Update multiple columns from multiple tables in a single UPDATE request
Hello
I'm trying to figure if I'm heading in the right direction.
I want to update multiple columns from multiple tables in a single UPDATE request. Also, I would like to update multiple columns in a table from the tables.
Scenario 1
UPDATE Table2, Table 3 SET T2.Column1 = T1.Column1 ,T2.Column2 = T1.Column2 ,T3.Column2 = T1.Column2 FROM Table1 T1, Table2 T2, Table3 T3 WHERE T1.id = T2.id and T1.id = T3.id
Scenario 2
UPDATE Table3 SET T3.Column1 = T1.Column1 T3.Column2 = T1.Column2 ,T3.Column3 = T2.Column3 ,T3.Column4 = T2.Column4 FROM Table1 T1, Table2 T2, Table3 T3 WHERE T3.id = T1.id and T3.id = T2.id
Hello
For scenario 1, you must write separate instructions UPDATE table2 and table3.
To guard against someone else change one of these tables while you act so you can copy all relevant data in a global temporary table and update this global temporary table table3.
ENGAGE only when two tables have been changed.
You can write a procedure or an INSTEAD OF trigger to do all this.
For scenario 2, you can reference many tables that you need when new table3. It might be more efficient and simpler to use the MERGER rather than UPDATED. For example:
MERGE INTO table3 dst
WITH THE HELP OF)
SELECT t1.id
t1.column1
t1.column2
t2.column3
t2.column4
FROM table1 t1
JOIN table2 t2 ON t1.id = t2.id
) src
WE (dst.id = src_id
WHEN MATCHED THEN UPDATE
SET dst.column1 = src.column1
dst.column2 = src.column2,
dst.column3 = src.column3,
dst.column4 = src.column4,
;
-
Need quick help! The use of tables
I just started using flash a few weeks ago, and for one of my school projects I am creating a pokedex which will display information, when the user clicks on some buttons. for example 'If you click the attack button, then 4 attacks will appear. I currently use frame skipping to my application; but my teacher suggested I use tables to make them all appear on a single image, but I don't know how to do this. Can anyone help?
Thanks in advance.
Tables are variables that contain several elements. A common use for tables is to make collections of items so that items can be related to each other by their relative position in each table. For example:
var letters: Array = new Array ("A", "B", "C", "D");
Table of figures: var = new Array (1,2,3,4).
Now, you can find an element in a table by searching for here:
var thisOne:int = letters.indexOf ('B');
trace (thisOne);
var thatOne:Number = numbers [letters.indexOf ('B')];
trace (thatOne);
The first trace shows that the letter B is in position 1 of the table letters. The trace of the second shows that the item in the table of figures in position 1 is number 2.
Who help me? You can learn more about the use of arrays in Flash here: ActionScript 3 fundamentals: paintings | Adobe Developer Connection
Maybe you are looking for
-
I just installed a new SSD. Everything works as it should but the disc that I loaded OS x of has me on 10.6.8. I can't upgrade to El Capitan or or the latest version because I did not 10.7. Is there anyway that I can get an update? Model name: MacBoo
-
silverlite update 02/09/10
Hello, since this update I can not use my printer photosmart p h. He said that it is not compatible and the printer does not work. I have download the repair tool, check that it always stops on Quebec, I hit fix and it shows that it is fixed, but whe
-
Cannot run files .hlp in Windows 7
-
HP Envy 4501: HPeprint is not available
I have two 4501 eprinters installed on my home router. I have two laptops of chrome which are both configured to print to a printer. Both printers have been working for some time on the two computers. A few days ago one of the printers displays th
-
Computer randomly changes the resolution huge police.
Sometimes it switches back between the normal and huge