Connection Wi - Fi, direct tcp/ip with the internal IP address

Similar Questions

• INS-06003: failure of connectivity SSH without password for installation with the following

  Dear all,
  
  I am in the process of installing Oracle 11 g on Redhat Linux 2 grid Infrastructure.
  I have installed ssh on both RAC nodes and when I run
  
  SSH - p7547 racnode1 "date; hostname ".
  SSH - p7547 racnode2 "date; hostname ".
  
  I get the date and the hostname without error on both nodes.
  
  But during the installation of the grid, I get this error message:
  
  INS-06003: failure of connectivity SSH without password for installation with the following nodes: [racnode1, racnode2]
  
  My thought is that it is because of the port has changed 22: 7547 but where them specify this port in the configuration of the CARS?
  
  I also get this information in the Setup log:
  
  WARNING: Could not establish a SSH connectivity with node racnode1. Reason: java.net.ConnectException: connection refused
  
  Kindly help on that.
  
  Kind regards
  Imran

  misterimran wrote:
  Dear all,

  I am in the process of installing Oracle 11 g on Redhat Linux 2 grid Infrastructure.
  I have installed ssh on both RAC nodes and when I run

  SSH - p7547 racnode1 "date; hostname ".
  SSH - p7547 racnode2 "date; hostname ".

  I get the date and the hostname without error on both nodes.

  But during the installation of the grid, I get this error message:

  INS-06003: failure of connectivity SSH without password for installation with the following nodes: [racnode1, racnode2]

  My thought is that it is because of the port has changed 22: 7547 but where them specify this port in the configuration of the CARS?

  I also get this information in the Setup log:

  WARNING: Could not establish a SSH connectivity with node racnode1. Reason: java.net.ConnectException: connection refused

  Kindly help on that.

  Kind regards
  Imran

  You can have the file/etc/ssh/ssh_config, where the default port is set at 22. Replace with 7547 and try ssh racnode1 "date; hostname". If it works, then it contains the definition, you may need to perform.

  Kind regards
  Julien

• Message appear conflict of IP address at startup. Another computer already uses the network with the same IP address. How do I cure this?

  When my kids play online on the X - Box I get an error message on my laptop when I start after them. It is said there is an IP address conflict and that another device is already on the network with the same IP address. It does not affect me access internet even if. How can I fix thi.

  Hello

  1. which is the version of Windows installed on the computer? For example, Windows 7, Vista

  2. only the error message appears only when the Xbox is connected to the computer or at both times?

  3. have you made any software or changes to the material on the computer before this problem?

  Please answer these questions and provide additional information so that we can better guide you.

• my windows says that another computer is running in the same network with the same ip address, please contact

  Today morning when I opened my samsung mini, it displays a message that another computer is running on the same network with the same ip address please find a solution for this

  In most home networks where multiple devices are connected to a router, router will assign an IP address to each device (via DHCP). This method keeps usually different devices to get the same IP address, but if you restart your router, it will not address remembered that he released before it was restarted.  This condition can also occur if you manually assigned an IP address to a device located in the router's DHCP range.  If the problem is not due to manually assign an IP address, then this condition will be corrected over time.  But if you're in a hurry, you can unplug your router from the wall and stop all computing devices on it.  Then plug the router back in and bring up all your devices again one by one.

  HTH,

  JW

• Welcome with the same IP address of a default gateway. How to prevent?

  Hello

  This week, I had a problem in the network. A host has been connected to the network with the same IP address of the gateway by default of this Vlan.

  Is there a way to prevent it? I know with 802.11 x I know who done it, but it would avoid the problem to occur.

  Is there anyway to force the hosts to use DHCP or something?

  It will also prevent an unauthorized on an untrusted interface DHCP server. It provides (on an untrusted interface) only DHCP client messages such as DHCP queries (rejects messages from the DHCP server as DHCP responses) and allows only the source IP address packages he knows the addresses assigned by DHCP. Who is?

  Darren

• My Satellite A100 does not support SDHC cards with the internal card reader

  Hello

  My Satellite A100 can't stand my sandisk 4 GB SDHC.
  'normal' SD cards are not a problem with the internal card reader, and there is no problem with the 4 GB sandisk SDHC card using an external card reader.

  is there a software solution?

  regrads,
  Itock

  I don't have the time to read the manuals for your model of laptop users, but can be registered to all supported cards. I guess SDHC not registered and not supported.

  I don't know what you mean with the software solution, but as far as I know, update for multimedia card reader is not available.

• Message came up with, "Windows has detected another computer with the same IP address on this netework."

  A message came that said, Windows detected another computer with the same IP address. "... or similar message to one, that could just be the functioning of the laptop for the wireless?

  MurrayJoe:

  > Mean someone has or may have access to my PC or laptop?

  You mentioned a wireless laptop. Do you get this message at home (when your laptop is in communication with your own wireless router), or that you get this message when in a public hotspot?

  If at home, then I would be not too concerned (what security options enabled in your home router?).

  If you get the message while using a public access point, this does not necessarily your computer has been hacked... but it is a warning that you should not ignore. In general, I would not go to any site that has my financial data, or any other sensitive data, a public hotspot. There are too many ways that a public hotspot may be compromised.

  Your original post said that "a message came that said, Windows detected another computer with the same IP address.

  There are several reasons this could happen... some innocent people and some not so innocent.

  If your network is configured for the most common way, then your router uses a feature called Dynamic Host Configuration Protocol (DHCP). You can read about DHCP here...

  http://en.Wikipedia.org/wiki/Dynamic_Host_Configuration_Protocol

  Basically, when a device on your home network needs an IP address, he asks your router and your router assigns an IP address... technically, "rents" the router address for a given period (one day). Once this period has elapsed, the device must 'renew lease'.

  DHCP stops you from the hassle of having to assign a static IP address to each device on your network and then don't forget to retrieve that meet if/when a device are removed from your network.

  Sometimes the process DHCP can be confused and assign the same address on multiple devices. If/when this happens, communication between devices on your home network may be confused. Windows is smart enough to detect that another device on your home network has the same address as the computer where Windows is currently running..., but Windows can not solve the problem.

  You can determine the IP address of the computer that is running Windows (and posted the message you saw)... by entering "ipconfig" (without the quotation marks) at a command line prompt. Then you can check the IP addresses of all devices on your network until you find the other devices with the same IP address. Then you could say either every device to get a new IP address of the router (or restart the device). Alternatively, you can try just stating the computer that is running Windows to get a new IP address (by first entering "ipconfig/release" then "ipconfig / renew" in the command-line invite him... all orders without the quotes).

  But since you said that you are not very tech savvy, my first suggestion was the easiest... just shut everything in your network, and then restart one at a time by starting with your ISP device, router, and other devices. If the problem persists after that, then more troubleshooting (as described in the previous paragraph) would be necessary.

  I hope this helps to clarify the issue for you. If you have any questions, please post them and I'll try to answer.

• API of BOTTOM add user with the PIM Memo/address settings

  Hello

  I try to add a new Blackberry user if LOW API with the PIM Memo/address configuration. I know that using the BASUserAdminClient it is possible, so I think it would be possible to do the same thing by using web services.

  Have no idea about it?

  Currently user control PIM by BWS is limited to control wireless synchronization and the resolution of conflicts, specification of the server is not yet supported for knowing where to retrieve the data.

• ASA 5520-Duplicate Object - network with the same ip address

  Hello friends,

  We have 5 people work as a team, some in collaboration with CLI and Assistant Deputy Ministers.

  now, we have seen with the same IP address other network objects are created,.

  now some time its difficult to solve or monitoring

  can someone help me to find a solution so that nobody can create any object with the same IP address.

  You could do with a technical solution like EEM where you analyze syslog to see if someone sets up an object with an IP address and then act on it. But WWM has 9.2 which is not available for the 5520.

  If you can solve the problem with an organizational solution. Apply a standard for naming, how objects should be appointed, ensuring that everyone watches he objects before creating new and more important, you must talk to each other which will configure that.

• My PC shows that there is someone else on my network with the same IP address. Could this be my Kindle Fire?

  I get the message on my computer that there is someone else on my network with the same IP address.  Could this be my Kindle Fire, that generated the message?

  In many cases, the ip addresses are assigned automatically by the router and if this is the case, something that can happen (happened to me) is that if several computers are attached (via wifi or ethernet or a combination of the two) and the router restarts while a computer is in sleep mode, when the router reboots it know that the computer sleeps is here and it can affect the ip address that has been already assigned to another computer.  When the computer sleep resumes usage it will trigger the dupicate ip address error.  In this case, you can just stop everything and restart.  The following discusses other causes and solutions: http://windows.microsoft.com/en-US/windows7/Get-help-with-There-is-an-IP-address-conflict-message

• Can connect to CC on two computers on the same IP address at the same time?

  Can connect to CC on two computers on the same IP address at the same time? Because I accidentally opened both and I was wondering if it will affect my membership or denying me access at the mercy of the CC.

  Cloud license allows 2 activations http://www.adobe.com/legal/licenses-terms.html

  -Install on a 2nd computer http://forums.adobe.com/thread/1452292?tstart=0

  -Windows or Mac has no importance... 2 on the same operating system or 1 on each

  -Two subscriptions CAN be used at the same time https://forums.adobe.com/thread/1683787

• User evolution ORA-06550 APEX 4.1.1 with the internal admin user account

  Hello
  
  I don't know when this error came first, but when I try to change the properties of a user in the workspace with the 'internal' working space ADMIN user, I get the follwing error:
  

  ORA-06550: line 86, column 7: PLS-00103: Encountered the symbol “IF” when expecting one of the following: ; <an identifier> <a double-quoted delimited-identifier> The symbol “IF” was ignored. ORA-06550: line 90, column 1: PLS-00103: Encountered the symbol “END”

  In my case, I tried to unlock a locked user account. It's used to work before!
  
  Note: to work around the problem, I managed to unlock the user account with another admin user created in the same workspace as the locked user...
  
  Is this a bug since 4.1.1?
  
  Thank you
  Matthias Hoys
  matthiashoys.WordPress.com
  
  Published by: mhoys on March 22, 2012 09:56

  Hi Matthias,

  Thanks for the information.

  The Group of patches to update a clob column in our metadata. The clob itself string is syntactically correct, it's why you didn't see any errors during the installation. However, within the chain, there is a space character where a line break should be at the end of a single-line comment:

  -- ...comment...
  --  ...comment...     if :P23_ADMIN = 'Y' then
    ...
  end if;
  

  Instead of

  -- ...comment...
  --  ...comment...
  if :P23_ADMIN = 'Y' then
    ...
  end if;
  

  Block PL/SQL that ran on submit, and now the 'end if' missing have 'if', where the runtime error.

  We've just uploaded a fix for this bug (13878034) to support, it should be available very soon.

  Kind regards
  Christian

• Thunderbird will only connect if stop then reopened. (With the help of Mac 10.9.4)

  With the help of Mac 10.9.4
  If I open Thunderbird, I can connect to my e-mail address and download the messages. If I select "Get Mail" once again, Thunderbird crashes and fails to connect to my emails. If I then close Thunderbird and re-open it, I'm able to immediately connect to my mail.

  It seems to have sorted itself after a few days. (Fingers crossed). Until today it worked properly. Will keep an eye on things for the next week and the report does so again.

• I can't access the system tools and trying to connect to internet it is blocked with the 404 error is returned

  Original title: help with XP

  Hello. Lost my son specifications accessories so I can not access tools etc as a result of this system by trying to connect to the internet, it is locked with the 404 error is returned. I checked and seems to be something that is called the prevention of execution of data, or something similar. I suspect that a virus may have corrupted windows. is there a site that I can connect to that will analyze or fix the erors with windows. I know a little about computers, but the easier the better solution to any who no matter what solutons to one of these problems. I tried turning of DEP, but it does not work. the indices or help gratefully received. Thank you

  Hello

  ·         What is the service pack installed?

  ·         What anti-virus program do you use?

  Method 1:

  I suggest you to download and run the latest Microsoft security on your computer Scanner and check if it helps:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: the data files that are infected must be cleaned only by removing the file completely, which means there is a risk of data loss.

  Method 2:

  I suggest you run the SFC (System File Checker) and check if it helps.

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  http://support.Microsoft.com/kb/310747

  Method 3:

   

  Error 404 occurs when Internet Explorer is able to connect to the website, but the webpage cannot be found. This error is sometimes caused because the webpage is temporarily unavailable or that the Web page has been removed.

  I suggest that you reset the internet settings explore by default and check if it helps.

  For more information, see the article.

  How to reset Internet Explorer settings

  http://support.Microsoft.com/kb/923737

  Important: Reset Internet explore its default configuration. This step will disable also any add-ons, plug-ins or toolbars that are installed. Although this solution is fast, it also means that, if you want to use one of these modules in the future, they must be reinstalled.

   

  Method 4:

  I suggest you create another user on the computer and verify the results: how to create and configure user accounts in Windows XP: http://support.microsoft.com/kb/279783

  If the problem does not occur in the new user, and then follow the steps from the link below: how to copy data from a corrupted to a new profile in Windows XP user profile: http://support.microsoft.com/kb/811151

• Customer Web couldn't connect to VMware Lookup Service error with the old server DNS name

  Hello

  I had a Vcenter server named virtualcenter.domain.com (192.168.1.10) with Vcenter 5.1 (with SSO, inventory, Webclient) on a windows 2008 R2 with a MSSQL2012 db.

  I tried to upgrade from 5.1 to 5.5u1 and he failed, Vcenter & Webclient installers have been crashing before you finish update

  So I decided to make a clone of my Vcenter and still have my production work while trying to update.

  My clone has been virtualcenter2.domain.com with a new IP 192.168.1.12

  I uninstalled everything for the webclient service that I had to clean files and registry entries manually, because he didn't find the uninstall program when I was clicking on uninstall.

  Then the installation went well, everything except the webclient service works very well

  When you try to connect to the new vcenter: https://virtualcenter2.domain.com:9443 / vsphere client / I got:
  

  Unable to connect to the VMware Research Service https://VirtualCenter.domain.com:7444/lookupservice/sdk -The SSL certificate verification failed.

  Why the error message is wearing the old DNS name?

  And why when installing, the webclient service to connect to the search service perfectly and then it doesn't work?

  After 1 day, uninstall/reinstall/install, try SSL things and many things, that I found online, the solution is the STUPIDEST thing ever.
  WHY DON'T C:\ProgramData\VMware\ls_url.txt USE VMWARE to provide the URL of the LookupService for the Webclient service? During the installation provide you the URL for registration with SSO, why the hell isn't it written that URL somewhere and use it after?

  And why the hell with all the gel/reinstalling ALL THE COMPONTENT of the Vcenter, I did, this MUTE txt file has not been updated with the new DNS name of my server?

  In any case, my webclient is currently working, but 1 day of work and mental torture do not understand why the hell my client was not working due to a file text fucking, it's depressing.