Connection Wifi Brighthouse problems

Similar Questions

• X 1 carbon connection WIFI 2015 problem

  just got my x 1 carbon and got the bells and whistles...

  I7, touchscreen, 8GB, 256GB SSD, intel AC, etc anyway, have a problem connecting to my home wifi. immediately, the initial configuration of windows 8.1, it wouldn't connect to the my wifi at home. Ive got a uverse wireless gateway which I think is always a G network device.

  but ive got tons of devices connected wirelessly at home. Basically, the intel AC 7265 tries to connect and it times out after about a minute.

  Ive tried upgrading the bios, update drivers intel, made a few changed to advanced properties after having considered the matter on the virtual assistant of lenovo, but no luck.

  been reading on the internet that the 7265 seems to be flaky and inconsistent for some people. I was wondering if anyone else out there there was a problem.

  the x 1 works fine at my job where we got a few aironets of cisco that are N Wireless I think.

  I was able to connect to my netgear comments AP neighbors this morning.

  IM also unable to connect to my iphone as a hot spot.

  so it looks like this wifi adapter is hit or miss.

  I ended up going on the support forums intel and read tips

  I went in the driver properties Advanced and replaced by wireless g only mode, and then it is connected.

  I then returned and handed over to the a/b/g degault and now it connects well... strange

• Connectivity Wifi U330p problem

  Hello!

  It's about a week I have my new lenovo u330p and I have a lot of problems with the Wifi at my house. my laptop is 30cm distance from the router but 1,1.5 hourly, I lose my connection, so it works again if I go on airplane mode and then turn on the WIfi... and sometimes disconnection occurs much more often and I have to restart my computer.

  Is there any solution for this? or it's just my problem?

  I tried the latest intel Driver (Wireless N 7260) thing am worse, so I downgraded to the original driver.

  I'll send my laptop if I can't find any solution for my problem

  I found a solution by mixing your solution and a few others, it works fine now, here are all the things that I've done, maybe some are useless. Remember that my windows is in German so I had to translate the names, it's pretty clear:

  1. switch to update to the latest firmware wireless
  2 uninstall the software intel proset/wireless for windows
  3. right click on the windows logo in the taskbar and select "Network connections" (in German: Netzwerkverbindungen)
  4. right click on the Wifi and choose "Properties".
  5. click on "configure".
  6. on the second tab, change "802.11n channel width 2.4 GHz" "20 MHz.
  7. activate the WMM mode mode "Ad - Hoc QoS"
  8. change the "wireless mode" to 802.11 g
  9. in the last tab, disable the ability for PC turn on your wireless device.
  10. don't forget to restart at the end.

  tnxx

• Connectivity Wifi Envy100 problem

  I have set up my envy 110 printer problems after moving from the United States to the Australia.

  It worked very well in the United States. I have connectied with the USB and works fine.

  Then I used the configuration utility to convert a Wifi device, but the old address will be not updated to the new network.

  The printer indicates that his current address is 192.168.1.11.  All the devices on my home Wifi are 192.168.0.xxx.

  The printer says it connects to the network and all right and he gets a new address, but then it has the same old address of 1.11.  I can not connect when there was the adresse.1.11. The installation utility only allows to ask the router for an address, but it always comes back with 1.11.

  I tried to put the mac address into the router with an address static de.0.47 but the ptr does not take into account.  While the printer says that it is connected to my network fine, the router can not see the printer.

  I would like to set manually the IP address but does not appear to have a utility that will allow me to set the IP address manually.

  Any suggestions?  IP addresses might be the opposite in the southern hemisphere.

  Hello again,

  I was looking through the tools of printers and came across a feature for the parameters of intellectual property.  Go in there, you can select manual or automatic.  He was set to manual.  I changed it to automatic and now everything is fine.  He is immediately connected to the router and received a new IP de.0.12.  It's really weird because I had never played with this setting.

  It was hard to find because the scroll on the touch screen feature is very difficult to use.  He always goes in the point instead of scrolling.  I didn't know that there are more options if scroll you down.

  The printer now works correctly.

  Thanks for your help.

  Greg

• WiFi intermittent problem. Win 10 think it is connected when there is no Internet.

  WiFi intermittent problem.  I have a 2 month old Dell Inspiron 15 5559 with dual band Wireless AC 3160 adapter Intel.  I connect via WiFi, start Pandora with Chrome and everything works very well for a few hours.  I monitor the status of the WiFi and noticed that when the speedometer drops to simple numbers temporarily, then resumed at 50 Mbps or more a second or two later, my browsers (Chrome, Firefox, IE, Edge) no longer work even if icons indicate "connected, secure" and LAN activity continues.  Pandora and all other browser activities cease until I have disconnect and reconnect.  The router, I had this problem with that is a TP-Link wireless-N that works perfectly with other computers, but I purchased & installed a D604 of D-Link router wireless AC to see if this can solve the problem.  It has exactly the same problem on both the 2.4 and 5 GHz bands.  Device Manager displays an Intel driver version 18.11.0.8 dated dated 22/06/2015 apparently normal and no! or? any where in the list of devices.

  So the obvious conclusion is that when the power of the signal is temporarily less than 10 Mbps for a second or two, then returns to the top 10 Windows thinks there is a good WiFi connection when it is not.  Disconnect and reconnect always solve the problem, but it's an obvious bug, and it's a pain.

  Hello

  I'm glad that you finally got this driver to install.  Microsoft has done a lot with Windows 10 trying to reduce the energy consumption on laptops.   In some ways, that has caused some problems with the wireless, making cards more susceptible to interference.   I hope that this driver will clear up many of the conflicts and problems that you see.

  Let us know how it goes.

  Todd

• I can't make a connection wifi with my Nook Color camera using a Microsoft MN - 700 wireless router. Can someone help me with the settings that could take care of this problem?

  I can't make a connection wifi with my Nook Color camera using a Microsoft MN - 700 wireless router.  Can someone help me with the settings that could take care of this problem? I have a Dell netbook and a laptop HP working with the router so I know it works.  The Nook also works in a Barnes & Noble store it seems so that the works of Nook.  I have a similar problem with a LG Vortex phone where I can't do the wi - fi connection.

  Please post on the Support forums technical Nook for help because it is not a Windows 7 problem...

  http://bookclubs.barnesandnoble.com/T5/nook-technical-support/BD-p/nooksupport

  .. .also than that...

  http://www.barnesandnoble.com/u/nook-support-connectivity/379002491/

  Don't forget the network encryption type, IE. WPA2/WPA and key/password / password must match the wireless router/access point.

  See also this about WPA2 on the MN-700...

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/cant-connect-to-MN-700-wireless-router/1789978f-7C90-4686-A956-2d17eb79960d

• Connection WiFi guard fall on my new laptop of HP ENVY m6-k025dx Sleekbook.

  Hello

  I just got my laptop new HP ENVY. Name of product: m6-k025dx. It works on 64-bit Windows 8. I feel a sudden loss and frequent my Wifi connection. When it disconnects, I don't even connect it to cursor (that slides off the right side of the screen and displays the network list) by clicking on the network down button to the right of the screen. I have to restart my laptop to connect again and after 5-7 minutes, I lose again.

  I have tried many suggestions on the amendment to the Plan of power for maximum performance and uncheck "Allow the computer to turn off this device to save power", but nothing seems to work.

  The network driver is Intel Centrino Wireless - N 2230. I have also updated the driver and off Bluetooth and ethernet as part of suggestions found on the web.

  I don't know if it is a problem of Windows 8 / Intel / HP. Help, please.

  Nadeem

  From my own research, if you have an intel centrino N - 2230 network adapter and use 8 64-bit windows, you need a new driver. This adapter has connectivity wifi which are known for problems intel. Check here: http://www.intel.com/support/wireless/wlan/sb/CS-025332.htm and then contact an HP tech via chat and they correct Web site, download and install the new driver from intel. I tried to do it myself, and it did not work. The technology did for me by online chat and remote assistance. Do it for what they tell you it's a hardware problem. It's a problem of network adapter that requires an updated driver. Let me know if it works for you.

• Satellite C660 - connection Wi - Fi problems

  Hello

  I have the Satellite C660 with windows 7 64 bit which continually lost the wifi connection. The problem has been compounded in recent weeks. It takes the point a is the only one to connect with a network cable.
  I updated the driver for the current version 1005.23.622.2011 without success. All our other laptop have no problem with the wifi connection.

  Can someone help with this problem of frustasting before I go out a buy a wireless dongle?

  Wayne

  Hello

  Have you noticed this problem with an adapter connected to your laptop computer or power supply battery only?

• Password WIFI WRT110 problem

  Hello world

  I have a very strange problem.  First of all, I told chapter of wireless security WPA and typed in my password.  However what connection in my name of the wireless network of my password never worked.  Second, I completely disabled security and tried to just connect without any password, but I was still asked a password however.  I checked and checked and saved the settings by ensuring that security has been turned off, but I was still asked for a password when choosing my wireless network!

  I could probably restore my WRT110 to factory settings, but I don't want to lose the other configurations as some open ports and IP addresses, that I opened for the firewall.

  Is it possible for me to fix my WiFI password problem without restore factory default?  I just need to understand how to operate the the WiFi passpharse.  Here's what I have here:

  Security mode: WPA Personal

  Encryption: TKIP

  Password: 0sunspot0

  The key renewal: 3600 seconds

  However, when I get my wireless network and try to connect by typing in 0sunspot0, I get an authentication failure.

  I'm doing something wrong?

  Thank you

  Victor.

  Save all your settings, so you can restore them after a reset.  Remove the password completely and try to connect without password.  If successful, go back and add WPA2-AES with a new password without special characters.   No test.  If no joy, hard, reset the router and restore it from your back upward and try again.

• RA link rt3090 can't connect wifi

  I bought the acer aspire revo r3700 even if the wireless network card drivers properly installed. It shows limited connectivty.my router is a TP LINK 150 Mbps WIRELESS AND ADSL 2 and my plan is to 1 MB. Help me please to connect wifi.

  Hello

  What is you get the exact error message?

  I suggest you click on the links and follow the instructions to resolve this problem:

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Why can't I connect to the Internet?

  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet

  It will be useful.

• whenever I try to connect wifi, a blue screen with Windows 7 error Stop: 0x0000007E comes and then restart windows.

  whenever I try to connect wifi, a blue screen with Windows 7 error Stop: 0x0000007E comes and windows restart.can any1 help me with this problem. my wireless card is qualcomm atheros AR5007 802.11b/g.my windows is windows 7 ultimate.please help with this issue.i m attaching files and dump the error image
  screenshot of error:

  http://sdrv.Ms/Nn8gDA

  memory dump file:
  http://sdrv.Ms/NiXJdJ

  Also, can you provide the latest files minidump since reinstalling the NIC driver.

• When I connect wifi or lan but it is not connect and began to turboshoot still appers a message "diagnostics policy service does not work.

  Separated from this thread.

  I ve acer aspire e1 - 531, now I am having problem about the internet, when I connect wifi or lan but it is not connect and began to turboshoot still appers a message "diagnostics policy service does not" can u tell me how to fix it... Please stp by step... Thank you

  Hello

  Thanks for posting your request.

  I would ask you to follow the steps below and check.

  While you are on the start screen, type cmd. Right click on cmd.exe returned and select 'run as administrator'.

  Once the command prompt window opens, type the following commands and press ENTER after each:

  net localgroup administrators / add networkservice

  net localgroup administrators / add localservice

  Type exit to close the command prompt window, or simply X starting at the top right.

  Restart computer and check if you still receive the message.

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

• How to connect WiFi Toshiba 40l5435Dg

  I wanted to know how I connect wifi with a toshiba 40l5435Dg and how you can improve it

  It is a TV...

  What do you want? a liquid cooled flat-screen?

  you better not TV...

• Possible PC portable HP Pavilion 15 15-e090se to connect WiFi 5 GHz?

  Hello

  I just want to check if possible PC portable HP Pavilion 15 15-e090se to connect WiFi 5 GHz?

  No. E3Z44EA3ABV

  Thank you

  Ajdee20

  Hello

  Go to Page 6 in this manual:
  http://h10032.www1.HP.com/CTG/manual/c03939658.PDF

  All the compatible wireless adapters listed for your model in the manual are adapter single band and operates on the 2.4 GHz ONLY band.

  Go to Device Manager and expand network adapters. You will see the names and model numbers wireless adapter.

  If the suffix of the wireless card description ends in bgn, then this is the only map of a single band (2.4 GHZ). If it ends in abgn or agn, then this is a wireless card dual band (2.4 GHz/5.0 GHz).

  Computers in most portable consumer HP are equipped with single band card.

  You can use the dongle USB wireless adapter Alternatively.

  Concerning

  Visruth

• Iphone4S unable to connect wifi... Help...

  I just bought my iphone... everythings so well... at first, wifi reacts to my wifi at home, then all of a sudden, it turns out... its been two weeks since i can not connect WiFi or even join wireless network.i have read tried them all to connect, but really cant. Ive already has resstart parameter and all... Please help.and thank you in advance.

  Hello Dissed.thanks forever you answer. Ive been thru all the procedures you mentioned before that I came here to find solutions. As I said b4, all perfectly healthy... I have my own wifi here in my house and I connected my iPhone so it's automatically activated when I'm home. And in the décor, free Wi - Fi is always on... abt join network too. So, if I am outside, wifi notifications automatically showed where are wifi network connections. Dissed I am very grateful for spend me your time and tried to help me. God bless you and take care.thank you