Connections between routers does not
I recently installed the demo of the CMA. I am able to create and activate the topologies, but it seems that there is no real connection between the nodes. Interfaces are on the rise, CDP is enabled, but I can't get through pings or CDP.
Can I do to solve this?
Hi John,.
Thanks for your reply...
I think that you have completed the configuration manually... I checked the attached file, it shows several configuration of the router AUSCE3845-01. Please confirm which is the last setting of the AUSCE3845-01.
can you try to set up with AutoNetKit and run the simulation, then try to ping.
-Abdellatif.
Tags: Cisco Network
Similar Questions
-
My labtop sound works, but when connect the headphones does not work
My labtop sound works, but when connect the headphones does not work. Note that the headset before 1 HR was working.
Hello
· Are these USB headset or headphone jack analog standard?
· What version of the operating system is installed on the system?
If you continue Windows 7 or Windows Vista refer to the procedure in method provided below and check if they help to resolve the issue.
Method 1:
Step 1:
You can check if the headphones are activated as a playback device. To do this, see the following steps:
(a) the Pearl-click Start and type Sound in the start search box.
(b) in the Start Menu Options, select change adapter settings .
(c) then, on the Read tab, right-click and select Show hidden devices and Show disconnected devices if they are available.
(d) select headphones and select
Step 2:
Also try to put headphones of default device and check, follow the steps below.
(a) go to Start and click on Panel.
(b) click Sound, and then a new window will open.
(c) in the new window click on the "Playback" tab and right-click in the window and click on Show disabled devices.
(d) now check if headphone is listed there and right-click on it and choose activate.
(e) highlight this helmet and click on "as default'.»»
-
Can't send or receive messages on behalf of Live.co (apermaculture). The connection name specified does not exist or your password is incorrect.
Server error: 0 x 80048821
Server: 'http://mail.services.live.com/DeltaSync_v2.0.0/Sync.aspx '.
Windows Live Mail error ID: 0 x 80048821Hi Nic of Necker,
When you use Windows Live Mail and the question you have posted is related to Windows Live, so it would be better suited in the Windows Live community. Please visit the link below to find a community that will provide the best support.
Windows Live Mail Forum
http://www.windowslivehelp.com/forums.aspx?ProductID=15
I hope this helps.
-
I am trying to create a VPN connection, but it does not work
I am trying to create a VPN connection, but it does not work
The wizard cannot establish a connection. And if I try to record simply does not connect
It does not work. If I try to click on find the problem, there simply
do nothing.
I tried it on another pc, where it worked. So the problem is not the
router or data network. And the curious thing is that I installed it before, but only from one day to the other, the VPN connection was missing.It does not create even a the connection icon
Thank youTry a system restore to a Date before the problem began:
Restore point:
http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/
Do Safe Mode system restore, if it is impossible to do in Normal Mode.
Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.
Try a restore of the system once, to choose a Restore Point prior to your problem...
Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
http://www.windowsvistauserguide.com/system_restore.htm
Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.
See you soon.
Mick Murphy - Microsoft partner
-
OT: On the keyboard interface.
When I try to open the keyboard screen, I get the prompt and click to connect, but it does not connect. My hard keyboard is dysfunctional and now I can't type my password to connect. Is there a way to get around this? Thanks for any help.
There is a problem with the KB3004394 update that causes what you see as well as other issues.
Uninstall this update, your system should return to normal.
While in Windows Update, select View Update History then installed updates. Go to the bottom of the list to KB3004394, right-click on it and choose uninstall.
Microsoft has removed the update of the distribution.
I would try to borrow a keyboard if you can so that you can perform the uninstall.
-
New router. Connection to the remote NAS device or a file between computers does not.
I just changed routers and lost my connection wirelessly between devices. Internet is good, but no connection with Lynksys NAS 200 wireless backup. And I can't share files between computers. All my permissions are large open on both computers, but same homegroup does not. Windows 7 on both computers. A desktop connected to the network and a wireless laptop which is connected to the NAS. My wired desktop backup is fine. NA not lose that connection.
I just changed routers and lost my connection wirelessly between devices. Internet is good, but no connection with Lynksys NAS 200 wireless backup. And I can't share files between computers. All my permissions are large open on both computers, but same homegroup does not. Windows 7 on both computers. A desktop connected to the network and a wireless laptop which is connected to the NAS. My wired desktop backup is fine. NA not lose that connection.
Me too, I unfortunately have the same problem.
Installed a replacement wifi router and lost access to a NAS. And it is the only element that would not be re - connect...
It's the config probably simple setting of the wireless router with the IP Address of the NAS (10.1.10.199 if this is of any help), but it's clearly a mystery to find useful info on how and what to configure...
Unfortunately, it was easier under XP...
Thanks for the research.
-
wireless connected but internet does not work
Since yesterday my laptop has had problems connecting to the internet. It will say that it is connected to the internet but yet when I open a browser or any other program requiring internet, it does not work. However, when I use the same connection from another laptop, the internet works.
I tried to use the option diagnose & repair and he always tells me that everything is fine. I also tried to restart my laptop and check my firewall settings, which did not help either. any help would be greatly appreciated!
Hello
Turn off the router or the modem (unplug the power supply) - wait 3 minutes, then the power restore - restart the computer.
If necessary:
Two methods - I would try 1. first and use 2. only if necessary because with 2 it can come back.
1.
Your router could be suspicious here, you have successfully updated its firmware as a possible solution? And I would like to
Update your WiFi drivers on computers. How you are positioned in the router? Are there
obstacles in the path?Actually try updating your driver and disabling the network logon. If you usually use WiFi try a wire
and if you usually use a wire try WiFi. Update, one being not used 1.Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlDownload - SAVE - go where you put it - right click – RUN AS ADMIN.
You can download several at once however restart after the installation of each of them.
After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
manufacturer of system become your backup policies).Repeat for card (NIC) network and is a good time to get the other updated drivers as Vista like
updated drivers.I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
are almost always old, and you can search drivers manually as needed.How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx------------------------------------------------------
Make sure you know the details of connection to your router wireless and wired - SSID and password.
You lose connection when you do and have to redo your logon.
Control Panel - Network & Sharing Center - right, click Customize - page set of network locations.
lower left click on merge or delete network locations - REMOVE all instances of your network (and the
others you don't use anymore) - REBOOT. Start - Connect To log on to the network.-----------------------------------------------------
Check this box:
Strange problem with Internet under Vista
http://www.catonett.com/blog/archives/194Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers
http://support.Microsoft.com/kb/928233/en-us----------------------------------------------------
And:
Network connection problems
http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspx==============================================
2.
Do a system restore before it happened.
How to make a Vista system restore
http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
I hope this helps. Rob - bicycle - Mark Twain said it is good. -
Hello world
hope you can help us with a problem.
We try to create a tunnel vpn site-to-site between offices in different countries. We create 4 vpn tunnel, 3 of them are working right now, but there is an ASA which does not allow the connection.
On our side, we have an ASA 5516 running firmware version 9.5 (1) that has this configuration:
ti_jamaica list of allowed ip extended access any object host_10.10.10.252
NAT (inside, outside) 1 dynamic source any destination host static 10.10.10.252 host_10.111.0.10 host_10.10.10.252
Crypto ipsec transform-set esp-aes-256 ikev1, esp-md5-hmac ts_jamaica
card crypto vpnpbs 1 match address ti_jamaica
card crypto vpnpbs 1 set of peer XXX.XXX.XXX.XXX
card crypto 1 ikev1 transform-set ts_jamaica set vpnpbstunnel-group, type ipsec-l2l XXX.XXX.XXX.XXX
tunnel-group ipsec-attributes XXX.XXX.XXX.XXX
IKEv1 pre-shared-key vpn1234internal GroupPolicy_xxx group strategy
attributes of Group Policy GroupPolicy_xxx
Ikev1 VPN-tunnel-ProtocolCrypto ikev1 allow outside
IKEv1 crypto policy 11
preshared authentication
aes-256 encryption
md5 hash
Group 2
life 86400On the other side, our office has an ASA (don't know the model) running firmware version 8.2 with this configuration
permit access list extended ip host 10.10.10.252 Outside_21_cryptomap 10.111.0.10
Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
crypto Outside_map 21 card matches the address Outside_21_cryptomap
card crypto Outside_map 21 set pfs
card crypto Outside_map 21 peer set XXX.XXX.XXX.XXX
card crypto Outside_map 21 the transform-set ESP-AES-256-MD5 valuetunnel-group, type ipsec-l2l XXX.XXX.XXX.XXX
tunnel-group ipsec-attributes XXX.XXX.XXX.XXX
pre-shared-key vpn1234crypto ISAKMP policy 170
preshared authentication
aes-256 encryption
md5 hash
Group 2
life 86400but I get this error on «See the ikev1 debugging»
11 February 15:32:06 [IKEv1] group = IP XXX.XXX.XXX.XXX XXX.XXX.XXX.XXX, Session = is to be demolished. Reason: The user has requested
11 February 15:32:11 [IKEv1] Group = XXX.XXX.XXX.XXX, IP = XXX.XXX.XXX.XXX, removal table correlator counterpart has failed, no match!
I already check that this error message, it indicates that there is a configuration issue between both sides of the VPN, according to the manual, it the encryption and hash does not match their topic, but we think we have the right configuration.
I appreciate any help or advice on your part.
Best regards
First of all your cryptographic domains do not match, correct so that the first. They are the same on both sides.
That's what they say.
access-list ti_jamaica extended permit ip any object host_10.10.10.252
And the other.access-list Outside_21_cryptomap extended permit ip host 10.10.10.252 host 10.111.0.10
-
Wireless connects, but internet does not work
My wifi signal is strong. My computer says that it is connected. Diagnosis shows the signal is stable, but when I open a browser, it does not connect. It just seems to take forever, but nothing ever happens in Safari. Chrome has said, "there no internet connection. Your computer is offline. "and that Firefox says: 'server not found '.
I tried the Ethernet connection, but it's the same story. Computer indicates recognition signal, but it will never truly connect. It will connect in Safe Mode, however.
I don't know if this is related, but iTunes does not work either. I open and just get the reel spinning forever. It is said he is unresponsive, and I force quit.
Here is some information that might be useful:
-iPhones and MacBook in the House are fine to connect to Internet.
-My internet company just came and installed a new router/modem. We had a few problems before (this is why they came to reinstall the hardware), so I don't know if this has something to do with him or not.
iMac
OS X El Capitan 10.11.6
3.2 GHz Intel Core i5
Deselect if selected proxy.
System Preferences > network > advanced > proxies tab
Unlock the lock if you have to.
Under "Select the Protocol", uncheck all box if marked cheque.
Click 'OK' and then 'apply '.
-
M9V10PA #ACJ model number
HP deskjet 5525 e printer all in one
question: -.
1.) can print via usb to the laptop window function 8.1, allows to print wireless from my smartphone Android based without direct WiFi router, connect to eprint, wireless with mobile router but can not print from my new hp laptop network is limited with! sign and the printer is not detected. (if printer problem, then it can not print from mobile and if problem laptop, he could not able to connect to internet I use.)
2.) my computer laptop wifi direct support means can I Exchange offline like bluetooth and can my printer is my computer laptop wifi and I can connect from printer.
3.) bluetooth teathering in andriod do not share internet on my laptop when I teather.
4.) usb teathering does not share internet to andriod which is samsung galaxy mobile new j7 sharing internet via wifi.
None of your support team is able to answer all these questions and not even want to listen to. All what they just time passes I try for 5 6 7 6 hours wasted days. they have just replied to the request is transferred to the technical service of master. If you have a mail solution please me [email protected]
USB and bluetooth internet sharing in 8.1 window I had to update my driver in the Device Manager I have updated ndis network driver that was yellow highlighted in color and it was not installed in window 8.1. After installation two teathering worked well.
For direct wifi in the printer I just on my direct wifi on my printer and network printer highlighted me in networks in form of PRINTING HP 41 Deskjet 5520 series with signs ! in wireless. ! sign simply means the network is limited and cannot share internet. So jusst linked to that as network limited and then used software to connect as wireless HP printer. It worked well, but have still the issue with speed on the network even my signal is full. Wifi printer on the direct network access speed is very very slow, I'm connected.how to improve the speed, I don't know.
Another issue is that my laptop is same average direct wifi capabilities to communicate with other devices can I create my own hotspot by laptop same name network HP-PRINT 41 Deskjet 5520 series in printer not supposed to share internet, but at least for wireless data sharing.
-
Hello
For some reason any my printer has ceased to be able to print anything at all, since last night at 7-8 so far, I've been able to print perfectly well.It is connected wireless (and on the home network and the IP address), but whether or not it is wireless (USB) - nothing will be printed at all.
Have tried everything imaginable... uninstalled and reinstalled all HP 3 or 4 times now, various attempted fixes via the online help, nothing works. Have unplugged router printer 30 s, unplugged 30s, you name it.
It allows to print in-house, however, no problem. Print a test - perfectly fine page, print a network test page - perfectly well. Clear print heads... everything comes out clear.
Spotted an error prompt "spooler subsystem app not working not"... so found this page online (https://social.technet.microsoft.com/Forums/windows/en-US/460f297a-dd66-4476-a176-542e1519ca3e/fixed... and thought it was the miracle solution - nope, still doesn't.)
Followed the steps detailed here: http://h30434.www3.hp.com/t5/Inkjet-Printing/HP-6600-won-t-print-wirelessly/td-p/4649292 - the link to the HP Print & Scan Dominican Republic by the way, is a dead link now... but I have tracked down the appropriate page and run the software. After following it exactly as I had to... I get this result:
"There is a problem with your software which can not be repaired by this tool. Remove the software by clicking 'uninstall '. Reinstall the software with the product CD or by downloading the latest features full software from HP Customer Care. "- so in other words... I am told to do exactly what I've already done 3 or 4 times.
It's driving me crazy... and do not understand why it will not print.
I hope someone here can help... because it's completely maddening.
Hello
By coincidence, my grandson has me bought a new computer earlier in the month. and it arrived yesterday afternoon, a Lenovo all-in-One ThinkCentre w/Windows 7 - and after it he installed there, the printer printed fine from the computer.But, just in case it is needed, and because the advice was here, I thought I'd try the options.
Unfortunately, I can't do a level 3 uninstall with the two methods provided. Method never showed a "util" folder or 'utility', both had a "utils" folder, and no method showed a record of "ccc". Also, by downloading the software, then go into the temporary folder through the search from the Start Menu, 3 sets of disc records came - and such that mentioned, none had the util/utility folder (all "utils" still had once) - and yet, none of them had a folder 'ccc '.
My grandson theory was that something is likely messed up in the registry, and he doesn't dare touch it without knowing what it does - than a reformat or something registry editting and knowing exactly what they're doig - would be the best choice, but rather of your time and... almost useless with the new computer capable of printing. A friend IT very well educated friends, also backed up his theory...
So, I have to wonder... don't you think it's worth, the Dungeon of combat with the old Gateway/Vista PC, or simply move to the new Lenovo/Windows 7 and cause less stress for us all? Haha!
Thank you for trying to help but... it's too bad the computer unfortunately does not cooperate.
-
I can only connect to the network via a wired connection. Wireless does not connect.
Wireless does not work but internet will work when plugged into router direstly
Wireless does not work but internet will work when plugged into router direstly I reset my router repeatedly and still will not work.
Not exactly what OS you use so here are some links to help you get started. If you need assistance with any of these steps please let me know. Thank you.
http://support.Microsoft.com/kb/870702
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-finding-wireless-networks
-
Can not connect. He does not recognize her fingerprints and does not recognize the password
Original title: cannot open a session
my friend cannot connect to his pc. For some reason it does not recognize fingerprints and then when he tries to connect manually using his password, it says it does not recognize the password, even though he knows that it is correct. Does anyone know why this is and how to solve?
Hi Knightofkent,
You can read the article and check if it helps.
What to do if you forget your Windows password
http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-do-if-you-forget-your-Windows-password
In addition, technical support engineers Microsoft cannot help you recover passwords files and Microsoft who are lost or forgotten product features.
Microsoft's strategy concerning lost or forgotten passwords
http://support.Microsoft.com/kb/189126
I hope this helps.
-
Error - Connection Internet Service does not start when try to start Windows Security Center.
Original title: Windows security center usually run in windows XP.
When I open the control panel and click on security, Windows Security Center indicates that it is not executed and wont run then when I try to turn it on I say error message does not start internet connection service. Also, my computer has been slowing way down lately and it takes forever to do even the simplest taskes. I just uninstall norton because my subscription ran out and then I installed MSE and malwarebytes MSE runs even slower, so I got rid of him.
-Edit
I also tried to use FixIt, but he said that there was an error during installation.Thank you. I had security work center. That's how I did it.
I wen to your link and found that I needed to go to start-my network places - view the network (in the sidebar) connections - click Properties (click on) Local Area Connection 2 - click on the Advanced tab - click settings (skip this step if who does not appear)
now, here, he said that there is an error and that I needed to start a process. I think it was 'Windows management instrumentation' but whatever it is, click Activate and change the startup type to automatic, and then click Start. then try to then you should do the same thing with
- Application Layer Gateway Service
- Network connections
- Knowledge of the network (NLA) locations
- Plug-and-Play
- Remote Access Auto Connection Manager
- Remote Access Connection Manager
- Remote procedure call (RPC)
- Telephony
Then Security Center. When you press OK in the properties, you should see a small lock appears on the network connections icon. now Security Center should work.
useful articles:
http://support.Microsoft.com/kb/919291
http://support.Microsoft.com/kb/827328
http://TechNet.Microsoft.com/en-us/library/bb457029.aspx -
My TalkTalk email keeps asking for a password, I connect but it does not connect.
Since yesterday my TalkTalk email started asking for a log on password, I click on accept and the log on process starts, but it does not connect to Talktalk.
I don't receive mails, but I can send!
Concerning
Problem solved it was because of the password being connected with the phone account!
Concerning
Maybe you are looking for
-
Anyone know what configuration is SmoothView?
Anyone know what configuration is SmoothView? I have problems with it and I want to install it again.But I don't know what Installer is... TKS
-
Toshiba L 39, 4333 - how to switch between ATV and DTV channels
I really don't understand. During a search of channel, I chose to find DTV and ATV, and he finds DTV 13 and 42 channels ATV,I can see the two in a list of channels while I'm still inside the channel search menu. But when I press the OK button (to exi
-
iPhone iOS 9.0.1 5 c
-
Anyone had problems using P0.4 digital inputs on a PXI-6133 map? I tried to use it on a couple of cards and cannot make it work, all the other lines on the work of the fine port. Any ideas? I don't think it's something that I do. Is this a known issu
-
Conversion exit visa to numbers
LabVIEW currently receives data from a device (via visa) as a string in the format NA [] [] [] [] [] [cr], where the [first] is a +/-, and the next [5] is a 4 number with one decimal digit. I need to convert this number that contains only the [] and