Wireless connects, but internet does not work

Similar Questions

• wireless connected but internet does not work

  Since yesterday my laptop has had problems connecting to the internet. It will say that it is connected to the internet but yet when I open a browser or any other program requiring internet, it does not work. However, when I use the same connection from another laptop, the internet works.

  I tried to use the option diagnose & repair and he always tells me that everything is fine. I also tried to restart my laptop and check my firewall settings, which did not help either. any help would be greatly appreciated!

  Hello

  Turn off the router or the modem (unplug the power supply) - wait 3 minutes, then the power restore - restart the computer.

  If necessary:

  Two methods - I would try 1. first and use 2. only if necessary because with 2 it can come back.

  1.

  Your router could be suspicious here, you have successfully updated its firmware as a possible solution? And I would like to
  Update your WiFi drivers on computers. How you are positioned in the router? Are there
  obstacles in the path?

  Actually try updating your driver and disabling the network logon. If you usually use WiFi try a wire
  and if you usually use a wire try WiFi. Update, one being not used 1.

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
  version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
  Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
  manufacturer of system become your backup policies).

  Repeat for card (NIC) network and is a good time to get the other updated drivers as Vista like
  updated drivers.

  I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
  are almost always old, and you can search drivers manually as needed.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ------------------------------------------------------

  Make sure you know the details of connection to your router wireless and wired - SSID and password.

  You lose connection when you do and have to redo your logon.

  Control Panel - Network & Sharing Center - right, click Customize - page set of network locations.
  lower left click on merge or delete network locations - REMOVE all instances of your network (and the
  others you don't use anymore) - REBOOT. Start - Connect To log on to the network.

  -----------------------------------------------------

  Check this box:

  Strange problem with Internet under Vista
  http://www.catonett.com/blog/archives/194

  Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers
  http://support.Microsoft.com/kb/928233/en-us

  ----------------------------------------------------

  And:

  Network connection problems
  http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspx

  ==============================================

  2.

  Do a system restore before it happened.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
  I hope this helps. Rob - bicycle - Mark Twain said it is good.

• I am trying to create a VPN connection, but it does not work

  I am trying to create a VPN connection, but it does not work
  The wizard cannot establish a connection. And if I try to record simply does not connect
  It does not work. If I try to click on find the problem, there simply
  do nothing.
  I tried it on another pc, where it worked. So the problem is not the
  router or data network. And the curious thing is that I installed it before, but only from one day to the other, the VPN connection was missing.

  It does not create even a the connection icon
  Thank you

  Try a system restore to a Date before the problem began:

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  See you soon.

  Mick Murphy - Microsoft partner

• 2611XM gets WAN IP cable modem, but internet does not work

  Hello

  I have a strange problem with my 2611XM router. At home, that I que je suis am put my cable modem in Bridge mode and try to configure internet access via 2611XM router. Here are details on the configuration of the ILO

  interface FastEthernet0/0

  WAN description
  DHCP IP address
  NAT outside IP
  IP virtual-reassembly
  route IP cache flow
  automatic duplex
  automatic speed
  !
  interface FastEthernet0/1
  LAN description
  192.168.99.1 IP address 255.255.255.0
  IP nat inside
  IP virtual-reassembly
  automatic duplex
  automatic speed
  No mop enabled
  !
  IP forward-Protocol ND
  IP route 0.0.0.0 0.0.0.0 FastEthernet0/0
  !
  !
  IP http server
  local IP http authentication
  IP http secure server

  IP nat inside source map route SDM_RMAP_1 interface FastEthernet0/0 overload

  !
  access-list 101 permit ip 192.168.99.0 0.0.0.255 any
  !
  allowed SDM_RMAP_1 1 route map
  corresponds to the IP 101
  !
  !
  !
  control plan
  !
  !
  !
  !
  !
  !
  !
  !
  !
  !
  Line con 0
  line to 0
  line vty 0 4
  privilege level 15
  password XXX
  local connection
  transport input telnet ssh
  !
  NTP-period clock 17208167
  !
  end

  The problem is that the internet is not accessible from 192.168.99.0 network. I can't even ping any public ip address of the router. Although I get successfully WAN ip on the fa0/0 interface of the cable modem. Any help appreciated.

  Thank you

  Hello

  Try below:

  no ip route 0.0.0.0 0.0.0.0 FastEthernet0/0
  no nat ip inside the source map route SDM_RMAP_1 interface FastEthernet0/0 overload
  no access list 101 didn't allow ip 192.168.99.0 0.0.0.255 any

  IP route 0.0.0.0 0.0.0.0 dhcp
  access-list 1 permit 192.168.99.0 0.0.0.255
  IP nat inside source list 1 interface FastEthernet0/0 overload

• Headset Bluetooth connects but microphone does not work

  I recently bought a blue Parrott Xpressway II Bluetooth headset to use with my Windows 7 computer and a Bluetooth of Rocketfish RF-MRBTAD adapter. First installation went well, and it worked for several hours. Then it disconnected and struggled to reconnect you to the top. Once he did reconnect, the helmet would work for reading, but not for the record.

  At the present time, I have:
  • Updated Bluetooth driver to the latest version.
  • Choose the Microphone headset as default device for recording in the sound section of the control panel.
  • Choose the Microphone headset as default device for playback in the sound section of the control panel.
  • Unplugged the headphones and then reconnected it.
  • Unplug the Bluetooth adapter and reconnected.
  • Restart the computer after each of these steps.

  So far, nothing seems to work. The headset is listed as peripheral by default for recording in the sound section of the control panel. (There the green check mark next to it). However, the helmet is clearly not pick up sound. No matter how hard I speak into the microphone, not a single green bar appears next to the list for headset.

  However, the network of microphones (which is simply registered as loan, with no green tick) straightens his. I see green bars appear next to his entry, when I make the noise. That microphone works, despite not selected.
  Can anyone offer advice on what I could do to get this working microphone? In the end, I want to use with Dragon Naturally Speaking. But for now, I'd settle for just the microphone to transmit all information.

  Hi Brian,.

  What is the brand and model of the computer?

  Method 1:
  I suggest to run the troubleshooter and check if that helps.

  (a) OpentheAudio recording utility by clicking the Start button, and then click Panel.

  (b) in the Search box, type Troubleshootingand then click on troubleshooting.

  (c) under hardware and sound, click Troubleshooting audio recording.

  Method 2:
  If him persists, try plugging the headphones on another computer as suggested by Sébastien M on September 12, 2013. Check to see if the problem occurs on the other computer.

  Check out the link for more information.

  Record audio with Sound Recorder
  http://Windows.Microsoft.com/en-in/Windows7/record-audio-with-sound-recorder

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.

• TM2 2100er / wireless connection of HP does not work

  reinstalled windows 7 (my hard drive broke)

  everything works fine, except wlan.

  Device Manager indicates that there is no driver installed for the network controller.

  I installed all the drivers from the hp site, so I suspected that my wifi adapter is dead.

  any suggestions?

  Sorry for the bad English.

  PS windows 7 Home premium x 64

  I don't know which is.

  is not recovery disc and its not so easy to order one in my country.

  PS found. Map of WiFi Broadcom 4313 802.11b/g/n 1 x 1 593836-001

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?swItem=ob-86003-1&lang=en&cc=us&IDX=1&mode=4& , seems. ill try it now

  PSS it works) thanks for the advice.

• Internet does not work, make HTTP: error 12007 connection

  * original title - error 12007 I need help! *

  I have a Windows XP with Service Pack 3 internet does not work. I got tired, he works with this http://answers.microsoft.com/en-us/ie/forum/ie8-windows_other/error-12007-the-server-name-or-address-could-not/2cbfb8a8-8970-4aaf-843c-1c781dc8053f post, but when I tried it on my netbook my windows update comes out of @%SystemRoot%\system32\shell32.dll,-22580

  I have an idea I have a missing or corrupted WinSock, but I'm not sure.

  Diagnosis of last run time: 23/01/12-18:52:53

  WinSock diagnostic WinSock status attmpting error information to validate the WinSock providers database: 2 error not all entries could be found in the basic services provider winsock catalog. A reboot is required. user redirection of information in support of the appeal. user redirection of information in support of the appeal. Diagnosis of network adapter

  Network location detection Info Using the Internet connection at home Identification of network adapter Info Network connection: name = Wireless 3 network, device = Broadcom 802. 1 1 b/g WLAN, LAN = Media Type, type SubMedia = wireless Info Network connection: name = connection to the network of Local 2, device = Atheros AR8132 PCI - E Fast Ethernet Controller, Media Type = LAN, type SubMedia LAN = Info Connections Ethernet and wireless available, ask the user for selection action User input required: select network connection Info WiFi selected State of the network adapter Info The network connection status: connected

  HTTP, HTTPS, FTP Diagnostic

  HTTP, HTTPS, FTP connectivity warn HTTP: Error 12007 connecting to www.microsoft.com: the server name or address cannot be resolved warn HTTPS: Error 12007 connecting to www.microsoft.com: the server name or address cannot be resolved warn FTP (passive): error 12007 connecting to FTP.Microsoft.com: the server name or address cannot be resolved warn HTTP: Error 12007 connecting to www.hotmail.com: the server name or address cannot be resolved warn HTTPS: Error 12007 connecting to www.passport.net: the server name or address cannot be resolved warn FTP (active): error 12007 connecting to FTP.Microsoft.com: the server name or address cannot be resolved error Could not make an HTTP connection. error Could not make an HTTPS connection. error Could not make an FTP connection.

  Hello

  You can refer to the suggestion provided by Divya the similar thread with a possible solution:

  http://answers.Microsoft.com/en-us/IE/Forum/IE8-windows_other/error-12007-the-server-name-or-address-could-not/2cbfb8a8-8970-4AAF-843c-1c781dc8053f

• Recently, I ran an anti-virus and learned that my netBT.sys file was corrupted. The anti-virus software installs this file but now my internet does not work.

  netBT.sys replacement files viruses

  Recently, I ran an anti-virus and learned that my netBT.sys file was corrupted.  The anti-virus software installs this file but now my internet does not work.  I guess I have to replace this file, but don't know how.  I see that I need to use my windows XP CD but my CD drive is broken.  How can I go about replacing this file?

  Thanks in advance

  Hi DonMendigo,

  Follow the suggestions below for a possible solution:

  Method 1: Try the SFC (System File Checker) scan on the computer.

  To run the System File Checker tool, follow these steps:

  a. click Startand type cmd in the box start the search.

  b. right click on cmd in the list programs, and then click run as administrator.

  c. If you are prompted for an administrator password or a confirmation, type your password or click on continue

  d. at the command prompts, the following line and press ENTER:

  sfc/scannow

  See also:

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  http://support.Microsoft.com/kb/310747

   

  File system (CFS) Checker

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/system_file_checker.mspx?mfr=true

   

  Method 2: If you are still unable to connect to the internet, then follow the article in the Microsoft Knowledge Base and check.

  Programs Internet in Windows XP cannot connect to the Internet via a connection to wide band

  http://support.Microsoft.com/kb/307164

   

  I hope this helps.

• I created a Web site and it is actually connected live. My login is working locally, but it does not work online. Could you please help me?

  I created a Web site and it is actually connected live. My login is working locally, but it does not work online. Could you please help me?

  Hi Hervé Joseph,

  Your question is more complex than what is generally answered in the Microsoft Answers forums. Appropriate in the MSDN Internet Explorer development Forums.

  Please post your question in the MSDN Internet Explorer development Forums

• HP 7612: I have a 7612 Officejet from HP that worked wireless but now does not work. When I try to

  I have a 7612 Officejet from HP that worked wireless but now does not work.  When I try to open the Network Setup Wizard a message indicating "wireless communication has been disabled. Can someone please?

  Thank you!

  hhmenar

  Hey @hlhmenar,

  Welcome to the Forums of HP Support!

  I understand that you are experiencing some problems with the wireless settings is disabled on your Officejet Wide Format e-all-in-one printer. I can help you with that.

  I'll send you some instructions describing how to do a factory reset on your printer. If you check your Inbox of forum you should see happens shortly.

  Please let me know the results after following the above. If you can run the wireless setup, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• My labtop sound works, but when connect the headphones does not work

  My labtop sound works, but when connect the headphones does not work. Note that the headset before 1 HR was working.

  Hello

  ·         Are these USB headset or headphone jack analog standard?

  ·         What version of the operating system is installed on the system?

  If you continue Windows 7 or Windows Vista refer to the procedure in method provided below and check if they help to resolve the issue.

  Method 1:

  Step 1:

  You can check if the headphones are activated as a playback device. To do this, see the following steps:

  (a) the Pearl-click Start and type Sound in the start search box.

  (b) in the Start Menu Options, select change adapter settings .

  (c) then, on the Read tab, right-click and select Show hidden devices and Show disconnected devices if they are available.

  (d) select headphones and select

  Step 2:

  Also try to put headphones of default device and check, follow the steps below.

  (a) go to Start and click on Panel.

  (b) click Sound, and then a new window will open.

  (c) in the new window click on the "Playback" tab and right-click in the window and click on Show disabled devices.

  (d) now check if headphone is listed there and right-click on it and choose activate.

  (e) highlight this helmet and click on "as default'.»»

• explore my internet does not work, please tell me how to solve this problem, it does not connect to internet

  explore my internet does not work, please tell me how to solve this problem, it does not connect to the internet while I have internet and other things could be used

  Hello

  Can you tell us more? What is the model of the unit? Do you have the same problem when using other browsers?

  Maybe you should just clear the cache or delete cookies? Try this link here.

  I hope that helps!

• I have connected, but when I need to update apps, again request the password, but it does not work?

  I have connected, but when I need to update apps, again request the password, but it does not work?

  Birgitte salvation,

  Have you tried to enter your system password.

  Please let know if it still does not.

  Concerning

  Megha Rawat

• When I try to update creative cloud, I get a popup to connect, I get my Adobe password, but it does not work. I have reset my password and I tried again, but it still does not work.

  When I try to update creative cloud, I get a popup to connect, I get my Adobe password, but it does not work. I have reset my password and I tried again, but it still does not work.

  The password screen shake when you enter the password?
  If so, it asks your Mac password.

  Don't worry about file opm, Adobe recreates him when you try to connect.

• HP Pavilion g6 (B1X18EA #ABH): switch to Internet does not work after update of 10 64-bit Windows

  Today I updated my laptop Windows 7 to Windows Home 64 bit OS 10. Everything seems to work fine, except the WIFI. Windows can't find my card, but don't wake him. My button built-in wifi (f12) got a red light on the subject, even when I pressed it. I tried the buttons Windows 8 wireless driver, but I does not solve my problem. With this driver installed the button turn the power Modeavion. Not between WIFI. Also the wifi settings WIFi will go off. When I try to turn it on, it turn on directly to 'off '. Internet connection cable works flawless.

  I gues it's a driver problem, so I was wondering if there is a next pilot? Or is there another way to turn it on.

  Please help me. It is very annoying.

  I've read som other forums and I came tot a solution:
  1. install Windows 8 button wireless driver
  2. perform a hard reset
  3. reboot the system
  4 boot BIOS tot, load default values
  5. the wifi button works.