OfficeJet 6600: HP Officejet prints 6600 pages of test, but USB connected or wireless - does not print anything

Similar Questions

• Hung up on the bad test page port (LPT1) and tail blocks to HP C4200 w/USB connect... will not erase

  Hanging test page to the wrong port (LPT1) and tail blocks to HP C4200 w/USB connect... don't delete.__How cancel?  Pls help.  TKS Ron Moore
  

  Ideas page: hanging in wrongly Test prt (LPT1) and tail blocks to HP C4280 w/USB connect... will not erase.

  How to cancel?  Pls help.   TKS, Ron Moore

  Hi Ron,

  1. how many printers is connected to the computer?

  2. did you of recent changes on the computer?

  3. what happens when you try to change printer (LPT1) port

  Method 1

  See the link below and run them the fixit tool available, check if it helps.

  Problems printing and printing errors

  http://support.Microsoft.com/mats/printing_problems/en-us?EntryPoint=lightbox

  Method 2

  If the previous step fails, then I suggest that you restart the computer the print spooler service and check if it works.

  A print spooler is a system service that temporarily stores the disk printing hard or in memory until the printer is ready to print.

  To change or restart the print spooler service

  You must be logged on as administrator to perform these steps.

  (a) open administrative tools by clicking the Start button, click Control Panel, clicking system and Maintenance, and then clicking Administrative Tools.

  (b) double click Services. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  (c) right click on the print spooler service, and then click Properties.

  (d) under the tab general , next to Startup type, make sure thatAutomatic is selected.

  (e) if the service is not already running, under Service status, click pie Sand then clickOK. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  Solve printer problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• The top of page 1 1/4 inch has no answer whin you click on it. As in this page, sign in or register and other app does not work. in English

  The top of page 1 1/4 inch has no response when you click it. As in this page, sign in or register and other app does not work. in English

  This problem can be caused by that extended the Yahoo! toolbar or extension of Babylon also well down and covers the top of the browser window and therefore links and buttons in this part of the screen not clickable.

  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.org/KB/safe+mode

• Device my printer brother printer had a paper jam. I fixed the jam but it always wiil me does not perform any print job.

  Hello

  My printer has a paper jam. I fixed the jam but it always wiil me does not perform any print job. What should I do?

  Sincerely,

  Misty

  Tuesday, October 23, 2012 13:38:01 + 0000, Misty Doran wrote:

  Hello

  My printer has a paper jam. I fixed the jam but it always wiil me does not perform any print job. What should I do?

  Call brother and ask them to say that a local place that services
  their printers. He brings them and get them to fix it.

  Ken Blake, Microsoft MVP

• Error: This page cannot be displayed - the remote device and does not accept the connection. (! found)

  * Original title: this page cannot be display the remote or unit does not accept the connection. (! found)

  My internet connection works very well, I'm trying to access a page of my gate of the school we use to complete missions. I can access my web page of schools, I can access my e-mail from the school, but I can't get the e-portfolio page. It says cannot display this page - the remote device and does not accept the connection - (! found). He said to ensure that the TSL and SSL in the advanced internet options security part turned on who they are, my better protected as well the mode. I've never had a problem accessing this page before. It is only this page! Help!

  Hello Teresa,.

  The probable cause of this problem could be due to wrong settings for internet explore.

  Please see the link below, Windows 8, follow the steps to check the Proxy and DNS settings
  http://support.Microsoft.com/kb/956196/en-us

  Warning: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

  Hope this helps, please answer with the results for assistance.

• OfficeJet Pro 8000 wireless: OfficeJet Pro 8000 wireless does not respond after a certain time

  I use my wireless OfficeJet Pro 8000 for quite awhile now, but I have a problem that I can't solve:

  Initially, it works allright. But after a few hours, it seems to go to sleep. And it does not print jobs more. I have to put the printer 'off' and 'on '.  After that, it will print the work queue.

  I searched a timer as issues in the web interface of the printer, but can't find anything that points to a solution.

  The printer is connected wireless to my router, using a 'fixed' IP address

  Can someone help me, please?

  Thankx

  These settings are to set up your wireless printer to stay connected to your router, wireless devices stay better connected and makes your router secure and hack proof.

  While the DHCP is convenient, devices like printers must always be assigned an IP (fixed) manually to avoid conflicts on your wireless network.

  1. Set a static in the printer IP address (click here) outside the range of the DHCP of the router (check your manual). It is for Linksys routers, but can be used for all routers. Check your DHCP range and change this first if necessary. More Help Wireless Printing is here (Windows solution 4, static IP).
  2. Or check in the printer "Auto off" is disabled the System Mode Time Out is set to zero (0) Use the built-in webserver (EWS) by visiting the printer address IP address in the address bar of your browser, click on settings tab/Auto Off. Or use the printer, printer Home Page (EWS) Wizard. Also check the properties of your printers.
  3. If the printer supports and has IPv6 enabled, disable the IPv6 option in the printer.
  4. If necessary and you have assigned a static IP address, try using auxiliary for the preferred DNS Server 8.8.8.8 and 8.8.4.4 as DNS server.
  5. Wireless printers work only on the 2.4 Ghz band.
  6. Make sure the printer is on the latest firmware by checking with the HP support site.
  7. Check all devices wireless in your home for interference. Check microwave, babyphones, phones, wireless and wireless alarm systems are a big culprit. Any of these will knock at your printer wireless intermittently.
  8. Make sure that your printer and router are at least 6 feet, independently of the other.

  In the router: (refer to the manual of your router for more information)

  1. Use a fixed wireless channel as the 1, 6 or 11, never 'auto', try channel 1 first then the rest.
  2. Set the router to 20 Mhz only or 145Mbps router function.
  3. Always use WPA2-AES encryption (personal), but you can try the "mixed" mode
  4. Disable the WPS and never use it and disable the UPnP for the security of routers. No one can hijack your system now and help with wireless connectivity (if you want to know why, research on the web).
  5. If you have a router dual band (2.4 Ghz and 5.0 Ghz bands), make sure the SSID is NOT identical, they must be different for all the bands, even for networks without comments.
  6. SSID broadcast should be enabled.
  7. Save all the settings. Food at the same time, wait 2 minutes.  Power on router wait 2 minutes.
  8. Marketing the printer and check that it reconnects to the router.

  Windows 7/8/8.1 is discovered the system on or off?

  1. Control Panel/Network and Internet/network and sharing Center / advanced sharing settings.
  2. Under home or work (current profile) / network discovery.
  3. Select "Turn on network discovery" and save the changes.

  Last resort effort - if your printer has an Ethernet connection, suggest you to get some adapters line and convert your Ethernet wiring for your printer.

• OfficeJet Pro 8000 Wireless does not wake

  New OfficeJet 8 k wireless bought about 3 weeks ago.  The installer went well, prints nicely when it prints. Problem is that he falls asleep and is not responding to print jobs, ping, http, HP net diagnosis... Essetntially, it "disappears" from the network.  However, if I reboot the router wireless, just the router, he wakes up, will launch the impression of the task that has been waiting in the queue.  When it is invisible network printer configuration page print correctly when the button is triggered.  Nothing I do on the printers of the controls (for example wake up wireless, shut down and restart,...) it reconnects to the network.  The only thing that works is to feed the router market.  Calendar does not appear to be related to the printers power saving mode directly (i.e. when the printer goes to economy that is still accessible for some time).  Seems to take from one day to the next, pretty much, for the "disappearance".  Disabling the firewall (Comodo) PC does not fix.

  The Setup is:

  • 2 computers (laptop w / XP pro and office w/XP home/Media Center)-both with the problem.
  • Laptop wireless
  • Office wired directly to a port on the router ethernet
  • DSL modem connects to the router

  Network configuration:

  • Router Edimax BR-6204WG (802. 11 g)
  • Computers use DHCP; term of the lease has changed to 'forever' - did not help
  • The printer IP static value. Static IP also configured in router (xxx.xxx.xxx.195)
  • Router IP address xxx.xxx.xxx.193; mask 255.255.255.192
  • DHCP range set to xxx.xxx.xxx.198 - xxx.xxx.xxx.220
  • WPA - PSK security
  • Channel 6 (neighbors using 1 & 11)
  • On the PC printer port is a port TCP/IP of STD.
  • Lates firmware & drivers installed everything autour

  Before this printer, I got a differrent print server (always connected, static IP xxx.194) who never had the problem.  It is a stable network that works intact for several years. I'm an it & network professional and at a loss.  Is ti software of the printer, the driver or the router?

  Any ideas?

  Sorry to take so long to recover.  I tried different solutions, no luck.

  So, I went with my gut and bought a new router (Buffalo WHR-HP-G300N).  My thought was that my 'old' router did not know how to wake up a sleepy printer.  New router has been working fine for a month.  Wakes printer very well.

  As another advantage, one of my kids will get to upgrade their 802. 11 b 802.11 G with my old router network.

  Thanks again.

• OfficeJet 4630: brand new officejet 4630 with the problem of black ink and ok button does not work

  Hello! Today, I bought a new printer, officejet 4630 and it included ink cartridges in the box.

  ISET it upward as the sheet in the box said. After I had filled in date etc, I put in the ink (and Yes, remember to check it was compatible and take the Ribbon), then this message showed on the screen and still doesn't work:

  "Problem of ink cartridges. The following ink cartridges need to be replaced"and a black dot.

  The cartridges were brand new and came in the same area as the printer.

  I tried a reset (taking the power cord, wait 60 s etc) I saw in the Hp support you need to press 'ok' to get rid of the message before restarting. I can't press ok. It sounds right. I press any button.

  Suggestions? Of course, I can try it with a new cartridge, but to pay $20 for a new cartridge, when it was included in the box and should work is not correct.

  Hi @Candykuma,

  Welcome to the HP Forums!

  I understand that you ar get the error, the "problem of ink cartridges. The following ink cartridges need to be replaced"with your black cartridge on your printer HP Officejet 4630. I am pleased to address this error of cartridge for you!

  Please, try the steps in this guide, a "missing cartridge", 'cartridge problem,' or 'not compatible ink cartridges' Message error for HP Officejet 4630 and HP Deskjet Ink Advantage 4640 e-all-in-one printer series.

  If this guide does not solve your problem, please Contact HPtelephone support for further assistance, as the ink cartridges are under warranty. (After you fill out the information, you will receive a phone number.) If you do not live in the United States / Canada region, please click the link below to get help from your region number. Language-country selector.

  Good luck!

  "Please click the Thumbs up icon below to thank me for having responded."

• all-in-one Officejet 6310: officejet 610 all-in-one in offline and don't watch does not reinstall in windows 8

  I have a Wondows 8.1 and a printer portable all-in-one officejet 6310.  I have my printer installed and works fine on my laptop, but out of the blue one day that the printer will be offline and restarting the computer and printer does not correct.  I've uninstalled and reinstalled the computer many times - this helps for about a week before it disconnects again.

  Now when I uninstall my laptop says there is no printer in range and lists no printer for me to install.  When I tried to manually in my printer - doesn't say that there is no such printer available.  Any suggestions?  Apparently this ONLY happens to me on my computer and not someone else in the home on their laptops - we have a total of 4 laptops in the House all on the same router and using the same printer.  Oh how I feel like a fool with windows 8.  Someone at - it helps or good suggestions for me? PLEASE? !!

  Don't worry, it happens to the best of us. I recently became very angry because my iPad was not charging, the end came unplugged from the wall charger! Laughing out loud

  This problem can be caused by outdated closed ware, contradictory I.P within the router, etc. I have worked on a Thread revolving around Windows 8.1 for awhile, check it out for some possible future troubleshooting operations.

  There are steps to add the printer a way, assign a static IP, check that some updates are installed by Microsoft, etc.

  Missing/partial prints & printer offline on Windows 8/8.1<>

• OfficeJet 6500 and router Wireless does not connect

  I just bought an Officejet 6500 and try to connect to my wireless router.  Whenever I try to connect the printer to wireless it crashes.  The power button does not light, but the screen is lit without text.  At this point, I can't close or get it running again.  I am running Vista Business 64-bit, and the router is a 2wire 1800 HG through AT & T.  It works very well with a usb connection.

  Thanks in advance.  John

  I think you just meet a known issue with some printers of HP network with routers 2WIRE AT & T DSL.

  Have identified us the problem and will deploy an update in the future.  So far, the work around is to assign a static IP address to the printer. Here's a way to do this:

  1. Unplug the phone line from the 2WIRE router
  2. Cut the power to the 2WIRE router, wait 30 seconds, then turn on the power.
  3. Go through the normal process of the printer connected to the 2WIRE (Ethernet or Wi - Fi) device. The printer will not crash as long as the telephone line is disconnected from the 2WIRE device.
  4. The Officejet front panel, go to the menu of 'Advanced Setup' under 'network '.
  5. Select 'Settings of intellectual property', acknowledge receipt of the warning and select "" manual IP ".
  6. Select "IP address" and change the last group of IPS (byte) to something higher or lower. Specifically to your 2WIRE router, select 192.168.0.60.
  7. Press Ok and plug the phone line into the 2WIRE router.
   

• Can I use USB connections and wireless on OfficeJet 6700?

  Only, we have installed a new Prime Minister to 6700 JO e-all-in-one by using the USB, one of our workstations. Is there a reason why we cannot set up wireless also, or do we first abandon the USB connection?

  I love the reliability of USB connection, but I would like to than others in the Office to use the features of the printer/scanner/fax too.

  Hi kreed,

  Yes, you can have the printer connected wireless and USB at the same time. Follow the document below to install the wireless printer. Have a wonderful day.

  Installation of the software of the printer on a wireless network or network (Ethernet) cable

• 4500 Wireless: 4500 Wireless does not print

  Hi, I have an Officejet 4500 Wireless printer. I set up the wireless connection to the printer, downloaded the software on my Macbook Pro OP Lion 10.7.5. Tried to print but queue indicates "printer is not available. Tried the reset from the list of printer/scanner on my computer, but still no solution.

  Before I tried this with my Mac as PC with which the printer not working anymore. Tried reseting printer list unplug the printer when turned on and many other recommendations of FAQ. I even tried to use a USB cable between the computer and the printer. Queue sometimes indicates that the printer was not available, and other times the loading bar % completed as if printing but nothing happened with the printer itself.

  Printer does not print with the PC or laptop. Any suggestions? Thank you.

  Hi again @franshe08!

  You're welcome and thank you for answering!

  I now resume our path to troubleshooting software. Please try these steps, everything in order, and I hope that you will be able to print later. These steps rarely let me down, fingers crossed.

  1. Reset the printing system
  2. Repair disk permissions
  3. Restart the Mac.
  4. Click on this link, download and install the complete driver: HP Officejet full feature software and drivers - OS X v10.7
  5. Try to print again. Try Text Edit, among other applications.

  Let me know what happens!

  Display thanks to my answer for you help today by pressing the "thumbs up" icon below!

• Download driver driver page for HP LaserJet Pro M201n hp support does not

  Met the error after downloading printer driver for HP LaserJet Pro M201n for Windows 7 on the official support of the HP page: the requested URL /pub/softlib/software12/COL55789/bi-134296-2/LJ_Pro_M201-M202_Full_Solution_14101-a.exe was not found on this server.

  What is c?

  Hi @ghforoiu,

  I see by your post that does not have the driver downloaded. I want to help you solve this problem. If this helps you to find a solution, please click on the button "" accept as Solution"" down below this message. If you want to say thanks for my effort to help, click on the 'Thumbs Up' to give me a Kudos.

  I met the same problem using Firefox. I tried to use Google Chrome and was able to download the drivers successfully. Please give it a try.

  If there is anything else I can help you, let me know. Thank you.

• .chm TOC using variables - print SSL does not recognize anything after the variable

  Here's something interesting that I came across today.  I think that maybe it's a bug in RH 10.

  I create .chm TOCs using variables.  For entries of table of contents of page, a content before the variable in the table of contents entry converts to the table of contents printed without problem.  But any content after the variable is ignored.  It's only a problem with the pages in the table of contents.  Books are very good.

  For example:

  Book TOC:

  "Clinic - {variable} {variable}.

  This translates very well to the table of contents printed in printed documentation SSL.

  Table of Contents Page:

  "Clinic - {variable} {variable}.

  Aside from the link in the table of contents page, the code for the TOC book and page table of contents is the same.  But, for some reason, anything after the * first * variable in the page table of contents is ignored in the table of contents printed for printed documentation SSL.  It doesn't matter if it's another right or variable text.

  

  In the image above, both the "clinic - display the list of participants in the" book of the TOC and TOC page on the left contains two variables:

  "Clinic - {variable} {variable}.

  On the right page "Clinic - Participant list", the variable "screen" is ignored and deleted page table of contents only when the layout of the chapter is created for printing SSL.  HR will remove anything after the first variable in the table of contents page, whether it's a text variable or right.  HR does not remove the antything of a book TOC when the presentation of the chapter is created for printing (visible in the picture above).

  Post edited by: eeddings - added image to visually show the bug.

  When you generate print books will go in the printed document.

  Pages in the table of contents of the document are not based on what is in the table of contents above, but on the topic title.

  Add the variable there and it works.

  See www.grainge.org for creating tips and RoboHelp

  

  @petergrainge

• pages started freezing, force to quit and restart does not work

  Try to do the homework, no good with computers. I used screen split pages with safari, then I'll click to pages and the cursor does not blink, and I can ty click on something, but nothing helped. I even try to click in Safari and who does not work either. I have to then press the task or what you call it, force quit applications, then restart. It started just randomly and really annoying, see I need to deal with all my classes AP. Pages for this when alone as well.

  Hello ElliottRadovan,

  I understand that the Pages and Safari sometimes appear to hang when switching between the two. Fortunately we have some articles that detail how to identify and correct the source of the problem, restore stability to your Mac.

  Isolate problems on Mac OS X
  https://support.Apple.com/en-us/HT203161

  Mac OS X: how to solve a software problem
  https://support.Apple.com/en-us/HT201516

  See you soon!