Similar Questions

• App store, Safari and iTunes does not connect to the Internet after installing macOS Sierra

  App store, Safari and iTunes does not connect to the Internet after installing macOS Sierra

  After upgrade 'OS X El Capitan' to "macOS Sierra" window only empty "App store" and page "Safari" made its appearance, no error message shows. store "iTunes" and "Dictionary" does not connect too.

  But Google chrome works well.

  So have you tried the next steps in your original post that Safari does not work after installing macOS Sierra:

  (1) x OS: "Unable to connect" or "unable to connect to the App Store. An internet connection is required"- Apple Support

  2) Advanced the steps to correct the problems with the iTunes Store - Apple Support connection

• iPad connects to the network, is unable to connect to Internet

  Received my new iPad. Automatically, it connects to my home network but does not connect to the Internet. I rebooted the router and the iPad, but the same thing. Same problem with the old iPad. That is what it is?

  Hello. When you go into settings > WiFi and tap the current network, that see you the IP address and other network settings, or they are all empty? You use DHCP to configure?

• My 5s iphone suddenly showed no service, then I made an attempt to update to ios and itunes connected, now iphone is not enable and display cannot connect to the server and in itunes it shows unable to check your device.please help me

  My 5s iphone suddenly showed no service, then I made an attempt to update to ios and itunes connected, now iphone is not enable and display cannot connect to the server and in itunes it shows unable to check your device.please help me

  Assuming that you have a valid SIM card in the phone, it is more often symptomatic of a phone that has been hacked or jailbroken to unlock.

  Where do you have the phone first?

• Can not connect to the WiFi on MacMini 2014

  When I try to connect to any WiFi on my MacMini it says ' Unable to join, try to get closer the router. but the router is right next to my Macmini.

  In addition, my wifi connection is correct. It is easily connected to my iPad and iPhone.

  I tried transferring a file using release from my iPad to MacMini. It worked.

  When I tried to connect to the MacMini with ethernet cable, it worked too!

  The only problem is that I can't connect to the router using the wifi on my MacMini.

  What should I do?

  Try to create a new network location:

  Using network locations (Mac OS X 10.6 and later)-Apple Support

  Try to connect as a different user.

  Have you removed the Mini?

  AirDrop uses bluetooth

  http://iPad.about.com/od/iPad_Guide/SS/what-is-AirDrop-how-does-it-work.htm

• Change of keyboard USB external Apple connected to the Macbook Pro

  Dear ladies and gentlemen,

  I need your help. I have a MacBook Pro running the last Sierra 17 "MacOS. I bought a 27 "Thunderbolt display and wanted to use a full external keyboard USB Apple (with the help of the digital keys). I have connected to the screen "USB port, closed down the internal screen MacBook... magic happened... keyboard poped office to the top of the screen external AND external full resolution was working properly..." Unfortunately only for 1-2 minutes, then the layout changed back irreversible in a layout resembling the layout if I would press "alt". Only way I could "resolve" to disconnect the keyboard USB plug and then plug again... but after 1-2 minutes did the same thing...

  I tried to plug the USB plug into the MacBook Pro directly, but the same thing happened...

  I am so unhappy that I can't use correctly the full length external Apple keyboard, large... Any hint/resolution?

  Thank you for your help in advance,

  Péter

  System Preferences > keyboard > Input Sources > [√] see Input menu in the menu bar

  ... then the menu icon before, choose «Show Keyboard Viewer»

  Now, look at the chart of the keyboard that appears on the screen. If the Alt/Option key is stuck, the key will be gray, as if it is held down. If you press it again, he himself is not?

• Unable to connect on the Messages or FaceTime after upgrading to Sierra

  Good afternoon! After upgrading my MacBook Pro (13-inch, mid 2010) to macOS Sierra (10.12.), I am unable to connect to Messages or FaceTime. They worked fine before the upgrade.

  • Messages: After entering my Apple ID and password, I get the message "Could not sign in iMessage." "Could not sign. Please check your network connection and try again. "or"an error has occurred during authentication. "My network is connected to the network (where this message), and the password is correct. Also, I have generated a password app specific to Messages. Enter just grew the message "your Apple ID or the password is incorrect." Messages is works well with my Google Talk and AIM accounts.
  • FaceTime: After entering my Apple ID and password, the engine just turns and it never connects me. Similarly, I have generated a password app specific but use it just gets the message, "your Apple ID or the password is incorrect."

  No idea how I can regain access to these applications? Thank you!

  Reached out to the Twitter account of Apple Support. He proposed to restart. It worked.

• "iPhone is disabled, connect to iTunes" AND "iTunes can not connect to the iPhone because it is locked with a password" error message on the phone and the computer! Help!

  So I recently had my password wrong too many times and my iPhone 4S locked out telling me "iPhone is disabled; Connect to iTunes'. And so I connected to iTunes and decided to restore my phone. I finished the process of restoration of the configuration of my phone, but ultimately, it was not even let me in the phone! Once AGAIN he said "iPhone is disabled; " Connect " to iTunes '. However, this time, this message appeared just when I turned on my phone with a black background. I didn't scan the screen for the error message is displayed (and there was no time to be shown). When I tried to connect to iTunes again as he asked, now it says "iTunes can not connect to the iPhone because it is locked with a password".

  So now, he said "iPhone is disabled; ' Connect to iTunes' on my iPhone 4S and ''iTunes can't connect to the iPhone because it is locked with a password ' on my computer. WHAT should I do?

  As described in step 2 of "Erase your device with iTunes" in this article, you will need to use the Recovery Mode.

  Recovery mode is described in this article as well.  You may try to go into recovery mode more than once to succeed.

  If you have forgotten the password for your iPhone, iPad or iPod touch, or your device is disabled - Apple supports

• Why always show that "there is a connection to the Apple store error."? It has been a month I am facing such a problem. How can I fix? Hope you have a solution to this...

  Why always show that "there is a connection to the Apple store error."? It has been a month I am facing such a problem. How can I fix? Hope you have a solution to this...

  I don't know if this is the problem, but it is something that must be correct establish a secure connection:

  Open Date and time preferences system, Date & time tab. Make sure that it is set to automatically set the time.

  Alternatively, make sure that your date/time is correctly set to the second.

  Another thing to try is to restart your modem and router.

• Devices to connect to the airport, but not to the Internet

  Hi all; Here's my situation:

  I just bought a new Airport Extreme to replace my old router (Linksys). In our House, we have two iPhones 6, as well as the iPad, Apple TV and MacBook Pro that were all bought again this year. All these things were able to connect to the internet using our old wireless router.

  As I have configured and installed at the airport, various devices have been able to connect without being able to connect to the internet (i.e. AirPort Utility, the airport connection is a green dot, while the actual internet connection is an orange): first it was the MacBook having this problem while the phones and the iPad have been completely connected. After I simply rebooted everything several times - i.e. the modem, router, and MacBook - I finally got the MacBook fully connected (without really changing all the settings, which are all entered correctly). Now, however, it is the two iPhones that will connect the airport but not actually in the internet.

  Any ideas? I must say, these strange little problems idiopathic who seem to always pop up with Apple products are starting to really bother me... I never got my MacBook to connect to the Apple TV via AirPlay.

  Any time you change the material or providers of Internet services, networking, it's always a good idea to perform a complete recycling of your network equipment power. Check out the following Tip of an airport users for more details on how to do it. Please post back your results.

• Unable to connect to the internet using Ethernet

  I have a Mac mini as I try to connect via Ethernet cable to a modem Comcast Arris TG862. I was connected via Wifi without problem (with the exception of the slower speeds). I know that the Ethernet ports on the back of the modem seem to work, since I can listen to my TV, etc. In settings > network Ethernet shows as green and connected and gives me an IP address, but as soon as I turn off Wifi no web page doesn't load.

  What I am doing wrong? I thought that it would just connect. On the Ethernet port lights, which I think means data transfer. Otherwise, I need to tell Firefox or Chrome to turn to the Ethernet connection?

  Thank you!

  The default configuration is to have the WiFi over Ethernet in the Service order.

  The order must be set such that the (desired) primary service is at the top of the list and the backup service is below.

  If you look at the order of service when it is connected to the network, the higher is the provision of access Internet one (or at least, he thinks Yes).

  To set the order, click on the menu of the machine and choose the order of Service. Move Ethernet to the top of the list. This should make it primary unless he loses the connection.

  However, it must move up Ethernet and provide a connection when you have turned off the WiFi. When you disable WiFi on the Mac, the Ethernet connection move to the top of the list and show a green connection?

• Full service then no appeal abandoned service cannot connect to the Tower

  Posted to help others:

  I bought an iPhone 6 s it took 3 hours for Verizon connect my phone to my new Verizon account. The phone would display full service bars then, slide an or no service in bars. the phone was finally connected but may 2016 so far I sill experience the same problem of poor or no service call and dropped. Often the phone will not even scream or try to connect to the network.  Apple has replaced the phone 3 x but with no. change my service problems. Verizon and Apple senior level tech support spent to treat 30 + hours on the phone with me trying to solve this problem. We replaced the SIM cards without change. When I put the SIM card in my iPhone 6 it works fine. Full don't signal any calls interrupted and service when roaming. Back in the 6s and no service in the same place. Put the SIM card in the other Iphones not without problem.  If roaming is enabled, phone often it will not conbect to the tower at all. WiFi call is disabled and LTE voice data are on. I've disabled CDMA and data with little or no change with the problem. When iphone 6s loses the service and I toggle airport power phone it will display momentarily full service bars, then the bars one or not, while remaining connected to LTE. In some areas, I can receive calls but can not shout. Sometimes I can txt use data without showing on my plan as using FaceTime and can use the internet. The order indicated above of multiservices to no service happens within 10 seconds repeat throughout the day all areas companies Verizon towers and riaming towers. Verizon finally got the iPhone 6 s to work with full signal across remote I've ever had service, but continue to hamper the not being able to call in roaming. Shortly after that, the phone back to old habits after that they tried to solve the roaming problem.

  After 5 months of no stop calls to Verizon senior level tech supports on September 22, a high tech support tech senior level line finally came to the conclusion after 3 hours of troubleshooting determined it is a software problem Apple 100%. It determined that the phone for a month not was not connected totally to Verizon even if I used it. There to reset the SIM card and the network settings on the phone several times during this period to have the phone drop any connection after initial power that showed a full service then dropped the LTE then, he loses all the bars of service then shows no bar service then no service what so ever in 10 seconds. This was the problem with this phone on the first day.

  He explained that he has heard of what is happening and that Apple is currently working on a solution, but will not be out until possibly October 2016. He also said that this problen is happening now with new models Iphone 7.

  HE then stated that a specific sequence is usually not used must be used to reset the network settings by releasing the bug fix.

  How to restore your device

  1. First of all, back up your device using iTunes or iCloud so you don't lose any personal information.

  Note: If this is the first time that you have saved on iCloud, it may take time for several reasons (speed of Wi - Fi, amount of info on your device).

  2. Connect to iTunes to restore your device. 3. Choose "Set Up as new". 4. Make sure you that you connect to iCloud with your Apple ID so that only your contacts are re-added. Do not re - add photos, music or applications as they can be the source of your problem. 5. Set up your email. 6. Test for the next few days to determine if your problem has been resolved. 7. Restore your backup from iTunes or iCloud.

  Note: If you have a food problem, try to use the recovery mode.

  I hope this helps someone it is to have the same problems. I'm waiting to see if the bug fix works otherwise I'm going to an android phone. It has been too long a process without having a phone that works.

  I have the same problem - it has taken far too much time out of my weekend to try to resolve this problem. In addition, the Apple support person I spoke on the phone was very condescending.

  I've read elsewhere that change the LTE cell Options > Data Only will not solve the problem. So far, this seems to have worked for me.

• WiFi does not connect if the SSID is not broadcast.

  I've updated to Sierra this afternoon. Everything seemed fine after the update. After dinner, my MacBook Pro (retina, 15 inches, beginning 2013) would not connect to Wifi. I reduced to a few things.

  It wouldn't connect the 5 GHz n If the SSID has been hidden. If I admitted the SSID to shown, it would connect without problems. It would connect to the 2 GHz band, even with the hidden SSID.

  I did the typical SMC reset and reset the NVRAM. I deleted the files related wifi and restarted the router and the MBP. I'm obviously on now and the speed seems normal with no dropouts. I can't hide the SSID now and will continue to work until he's asleep; No dice after that without reactivation SSID broadcast.

  Any thoughts?

  See you soon,.

  Fred

  With your same Apple ID, you can register for a free developer account and start a conversation with Apple engineers. They will answer your question: Bug Reporter https://bugreport.apple.com/

• I just bought the last Apple TV - I can't seem to connect with the App Store and Siri is completely useless. This is an example of how Apple is unable to produce a useful product?

  I just bought the last Apple TV - I can't seem to connect with the App Store and Siri is completely useless. This is an example of how Apple is unable to produce a useful product?

  Hello

  Be sure to follow the instructions in this article to support > set up your Apple TV (4th generation) - Apple supported

• Unable to connect to the VPN server

  Hello

  I'm on Sierra, iOS macOS 10 and Mac OS Server 5.2 (on a Mac mini).  (All dated September 21, 2016)

  Because PPTP is no longer supported, I am trying to create L2TP.  Unfortunately, when I try to connect to the server, I get the error "the VPN server has failed. Please check the server address and try to reconnect. »

  I do not think it is a problem of networking: back to my Mac is not enabled, the appropriate ports are transmission (UDP 500, 1701, 4500) and server says that the service is accessible.

  When I check the logs from the server after a connection attempt, I find:

  21/09/16 21:08:09.994 raccoon [75993]: can't find configuration.

  21/09/16 21:08:13.285 raccoon [75993]: can't find configuration.

  21/09/16 21:08:16.578 raccoon [75993]: can't find configuration.

  21/09/16 21:08:19.884 raccoon [75993]: can't find configuration.

  Any suggestions?

  Does anyone know where the configuration file is supposed to be on the server, so I can look at?

  Thanks for your help!

  Hi Rick,

  -Check that the folder/etc/racoon exist and the folder contains psk.txt and racoon.conf.

  -Installed with the operating system.

  Cheers, dwbrecovery