Unable to connect on the Messages or FaceTime after upgrading to Sierra

Similar Questions

• Unable to connect to the URL of planning after new installation & configuration 11.1.2

  I installed 11.1.2 on Windows 64 bit environment and configured.
  
  This is my environment:
  Box 1. FS, Essbase, Weblogic, Oracle HTTP. Successfully set up and works great no problem (I don't not configured web server in FS yet)
  Box 2. Planning. Installation and configuration was successful.
  
  Question: but unable to connect to the URL http://servername:8300/hyperionplanning/logon.jsp and http://servername:19000/hyperionplanning/logon.jsp (I'm not expecting 19000 will connect)
  
  Trobleshooting:
  When executing netstat, 8300 does not run on this box.
  Also configured to 'Manage the clusters of planning' with no luck.
  The WebLogic (11g) server indicated State planning is unknown.
  Diagnosis indicates: 1. There is no 2 System-jazn-"Data.xml" file. Web application for planning has no reason of error: java.net.ConnectException: Connection refused: connect
  I stopped and restarted service app planning several passages of time without any problem but unable to connect to the URL and no port is running.
  Journal of planning does not reveal the error messages.
  EMP system log shows ServletContainerAdapter manager not initialized successfully
  There is no error in start-HyS9Planning - out .log.
  Start-HyS9Planning - error.log shows the requested service has already been started.
  
  There is an error in the validation log:
  
  [2010-10 - 06T 10: 18:23.171 - 04:00] [EPMVLD] [ERROR] [EPMVLD-02017] [oracle. EPMVLD] [tid: 25] [ecid: 0000Ii1u3V8EcLPMyeU ^ MG1Cf8KW00000E, 0] [SRC_CLASS: com.hyperion.cis.validation.checkers.impl.AppServerChecker] verification code error response: []
  java.lang.Exception: java.net.ConnectException: connection refused: connect
  at com.hyperion.cis.utils.HttpUtils.checkResponseCodeGood(HttpUtils.java:153)
  at com.hyperion.cis.utils.HttpUtils.checkResponseCodeGood(HttpUtils.java:66)
  at com.hyperion.cis.validation.checkers.impl.AppServerChecker.checkWebApplication(AppServerChecker.java:159)
  at com.hyperion.cis.validation.checkers.impl.AppServerChecker.checkWebApplications(AppServerChecker.java:119)
  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
  at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
  at java.lang.reflect.Method.invoke(Method.java:597)
  at org.mozilla.javascript.MemberBox.invoke(MemberBox.java:160)
  at org.mozilla.javascript.NativeJavaMethod.call(NativeJavaMethod.java:243)
  at org.mozilla.javascript.optimizer.OptRuntime.callProp0(OptRuntime.java:119)
  to org.mozilla.javascript.gen.c14._c0(./scripts/webappcheck.js:2)
  to org.mozilla.javascript.gen.c14.call(./scripts/webappcheck.js)
  at org.mozilla.javascript.ContextFactory.doTopCall(ContextFactory.java:401)
  at org.mozilla.javascript.ScriptRuntime.doTopCall(ScriptRuntime.java:3003)
  to org.mozilla.javascript.gen.c14.call(./scripts/webappcheck.js)
  to org.mozilla.javascript.gen.c14.exec(./scripts/webappcheck.js)
  at org.mozilla.javascript.Context.evaluateReader(Context.java:1119)
  at com.hyperion.cis.validation.RunningEnviroment.processSource(RunningEnviroment.java:222)
  at com.hyperion.cis.validation.RunningEnviroment.runScript(RunningEnviroment.java:279)
  to com.hyperion.cis.validation.RunningEnviroment.access$ 000 (RunningEnviroment.java:40)
  to com.hyperion.cis.validation.RunningEnviroment$ 1.run(RunningEnviroment.java:132)
  Caused by: java.net.ConnectException: connection refused: connect
  at java.net.PlainSocketImpl.socketConnect (Native Method)
  at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:333)
  at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:195)
  at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:182)
  at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:366)
  at java.net.Socket.connect(Socket.java:519)
  at sun.net.NetworkClient.doConnect(NetworkClient.java:158)
  at sun.net.www.http.HttpClient.openServer (HttpClient.java:394)
  at sun.net.www.http.HttpClient.openServer (HttpClient.java:529)
  to sun.net.www.http.HttpClient. < init > (HttpClient.java:233)
  at sun.net.www.http.HttpClient.New (HttpClient.java:306)
  at sun.net.www.http.HttpClient.New (HttpClient.java:323)
  at sun.net.www.protocol.http.HttpURLConnection.getNewHttpClient (HttpURLConnection.java:852)
  at sun.net.www.protocol.http.HttpURLConnection.plainConnect (HttpURLConnection.java:793)
  at sun.net.www.protocol.http.HttpURLConnection.connect (HttpURLConnection.java:718)
  at com.hyperion.cis.utils.HttpUtils.checkResponseCodeGood(HttpUtils.java:111)
  ... 21 more
  
  ]]
  
  
  What am I not doing?
  
  Thanks for your help in advance!
  
  Published by: VenuRamini on October 6, 2010 07:25
  
  Published by: VenuRamini on October 6, 2010 07:35

  Make sure that the Weblogic password is correct in the boot.properties and restart the services.

  Boot.properties files would be present in D:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\\security\boot.properties

  For example,.

  For APS:
  D:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\AnalyticProviderServices1\security\boot. Properties

  For Regional service:
  D:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EssbaseAdminServices1\security\boot. Properties

  HTH-
  Jasmine.

• Unable to connect to the Oracle Forms cmdlet after 30 Seconds (OATS)

  Hello
  
  While playback get error of OATS (Oracle Application Testing Suite) am most of the time 'Impossible to connect to the Oracle Forms applet after 30 Seconds (OATS)'.
  
  Please suggest solution for this type of error. I can't go further with this type of error.
  
  Kind regards
  Sairam

  Hi Sairam,

  GoTo OpenScript preference and change timeout for reading of the EBS/forms.

  Launch OpenScript, click view and select Preferences OpenScript. Then select Oracle EBS/functional forms under playback. Change timeout value.

  Kind regards
  Dembélé M

• WNDR 3400v3 unable to connect to the Firmware update automatically after ISP

  After the upgrade to Version Firmware to 1.0.0.48

  I am unable to connect automatically to ISP using PPPoE configuration, using the connection information...

  I am forced to use, no connection required during installation and each time you connect via the portal of the ISP.

  Need help.

  To your "connection Mode" set it to always on.

  If it still does not work, please post a screenshot of this window you get.

  By the way, have you tried to reset the router after firmware upgrade?

  If you have not, please push the reset button on the router for 10 seconds with a paperclip.

  After the reset, reconfigure the router.

  Let us know what happens.

• Unable to connect to the Outlook e-mail after that put 9.3.1 update

  I can't connect to Outlook e-mail after set 9.3.1 update.

  "Cannot get Mail.

  The connection to the server has failed. »

  I tried to delete the email account and add it again. The same problem.

  I know that this is a widespread problem now.

  When will this issue be resolved?

  Thank you!

  Yes im also having the same issue but it happened at about 23:30 email hotmail server seems to be down for me but I am on ios 7.1.1 if this isn't a thing of ios. Also tried it on another ipad, iphone and outlook using windows 8.1 so im 99.9 per cent a few hotmail servers are out of service

• Unable to connect to the second Pc (WinXP) after lapop upgraded to Windows 7

  I had the DVD of Windows 7 Ultimate free upgrade and installed successfully.

  All programs work, able to connect to the internet, no problems.

  Network home (Workgroup) defined and was available via before Vista upgrade to Windows 7.
  I mean available able to see that both computers defined in the task force of each machine.

  After the upgrade Windows 7 does not show the other machine and screw-a-to-a.

  Settings network checked and everything seems OK.

  Suggestions and advice appreciated.

  Thank you

  I have,
  the test center network disable password
  did the tour here!
  Rgds
  Alex

• Unable to connect to the network wireless company after Win7 upgrade

  My network is not broadcasting the SSID, so on Vista, I used to set up the connection manually.  However, with Win7 64, I get an error "an unexpected error has occurred."

  Reference Dell xpsM1330

  Intel WiFi Link 4965AGN

  Any help would be appreciated.

  OK, let's see if we can keep it active and come up with a solution...

  Got a POC MS to give me some info that may help...

  I have known many above have, while I can connect to wireless networks, including my home wpa2, plus any time, I tried to do a my wpa2-Enterprise don't, go and had errors in the event log. also the similar failures whenever I would try to manually create any wireless profile using wpa-enterprise or wpa2-enterprise.

  Note also mine was a machine that got USMT data migrated, and I have a feeling that it was responsible for migrating the keys below...

  So here was the final solution, and maybe you guys can check if it is the only necessary thing that I had tried various other things without result, but it was the 'last' modification I did that things work...

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\RasMan\PPP\EAP

  There are a number of subkeys with different numeric values...

  while I can not tell you exactly what to search for, in my case I noticed there was a key pointing to what I expected, a related key ras in the ED. of windows\system32 however, I had also three other keys pointing to the files associated with Symantec, which I did not on my machine newly built.

  So I exported keys of a newly-built machine that did symantec. He had four keys under EAP, but only one, the last of them, was related to Symantec, underlined all the other files in system32.

  I have imported the keys in my broken machine, removed the a key which was related to symantec and without even having to restart... everything has been corrected...

  so... here my suggestion and I hope everyone can comments if it works, so we have more information if it's the order of the keys or just the presence of bad entries... but I would say, start by looking at your key under EAP and see if there's anything that references the dll files which may not exist on your machine.

  If you don't have these keys, either remove the key, either try to put the file in place which is referenced, assuming he hasn't.

  We will do other tests internally, so I'll feed if we have additional findings.

  Good luck.

• Unable to connect to the printer via ThinPrint error: "serial0: unable to connect to the virtual printer daemon after 25 attempts." The device will be disconnected.

  I started this thread on the debate under of the "Fusion free v2.0.3" but Michael suggested I post this as a new thread, because it turns out that my problem was not due to the much discussed most recent update security Max OS causing ThinPrinting to break.  Whenever I have start up of my (Win XP and Windows 7) VM beta I get the above error message, and therfore cannot take advantage of the ability of merger of ThinPrint print on my printer Mac network.  Michael asked several log files, I have attached 3 in this post and others attached to my next post, so I hope you smart people of VMWare will be able to help me with this problem.  Thanks in advance!

  Ron

  I got a response from ThinPrint with a possible solution - the problem may come from a file/etc/printcap obsolete, which refers to a computer that no longer exists. The DNS lookup may be a delay of 30 seconds and can block the process of thnuclnt. The file/etc/printcap file contains a copy of the configuration of the printer, but it is not necessary for the thnuclnt. It is generally not yet created by OS X by default, but it seems that previous updates to the OS X system or printer drivers can be turned on at any given time. Subsequently, the option got turned off, but the old file was left with outdated information.

  Could you try to rename the file/etc/printcap file and see if it eliminates the delay of 30 seconds? To do this, run Terminal and use the following command:

  sudo mv/etc/printcap /etc/printcap.bak

• Unable to connect to ASA 5505 with AnyConnect after upgrade to 8.2

  I just bought a license of VPN AnyConnect Essentials for my ASA 5505.  I had to spend to 8.2 ASA.

  Now that I updated and installed the license, the AnyConnect client will connect is no longer.  It gives the following error: "failed to process the response.

  You can provide any help would be appreciated.  I am pleased to provide you with the configuration information that might be useful if you can provide the CLI commands, you want that I run.

  Looks like he doesn't like THEM too, you can change the encryption algorithm to 'not' include in your strategy:

  3des-sha1-aes128-sha1 sha1 aes256 encryption SSL

  In general is not very safe anyway, and the choice of encryption above will provide you with the best encryption strategy.

  Hope that helps.

• Unable to connect to the App store on iOS 4.2.1

  Hi guys!

  I decided to take my iPhone good ol' ' 3 G out of the darkness to use it as a backup phone in case of any situation, unhappy and unable to connect to the iTunes/App store after several tests. I checked my wifi connection and it worked well on Safari. Someone here has a tip on how to fix? Or has Apple really stop its connectivity on the older iOS app store - are

  After seeing your post, I booted up my 3G to test and noticed the same thing. I thought it might have something to do with Date & Time settings. I noticed that, even though 'Set automatically' performed, the phone thought that the current date was in September of last year. Since the App Store will not work if the date and time settings are incorrect and that the phone can't connect to the server to get the right time, I would say that is why you don't get on the App Store (assuming that you also see the anomaly of the moment).

  I have an iPod touch 2nd generation, which also iOS 4.2.1 and will test it tomorrow there.

• series 0: could not connect to the printer virtual daemon after 25 attempts

  I get the error message that the virtual printer daemon can't connect whenever I start the guest system and I can't get my printer to work from Windows.  He used to work when I first set up my VM.  Any suggestions on what this means and how to fix it?  I'm on Mac OS X 10.5.6 on a MacBook Pro and have Windows XP Home Edition on the virtual machine.  Also, when the printer works on the virtual machine, it still required me to disconnect, and then reconnect the USB connection to make it work.

  If you Search the forums for "Failed to connect to the virtual after 25 attempts printer daemon", the first result from that moment is Re: unable to connect to the printer via ThinPrint error: "serial0: unable to connect to the virtual printer daemon after 25 attempts." The unit will cut'. In this thread, mudaltsov follows the problem down to one/etc/printcap needless - move which should solve the problem.

• Unable to connect to the servers of SnapChat. IOS 4.2.1. iPhone 3G. Error message: unable to connect to the server. Please try again later.

  Hello

  I can not connect to servers SnapChat

  IOS 4.2.1

  iPhone 3G

  Error message:

  Unable to connect to the server. Please try again later

  Thank you for your time and understanding.

  Hello!

  It seems that you can not use your SnapChat the way app which you should be. I would use the troubleshooting steps in the following article for third-party applications. You may well reach out to the developer if the problem is not solved by the article though:

  If an application you have installed unexpectedly closes, unresponsive, or does not open

  Thank you for using communities of Apple Support.

• Unable to connect to the wireless network, error message "Windows could not finish repairing the problem because it is impossible to perform the following action. Renewal of your IP address.

  Original title: Unable to connect to the wireless network

  Unable to connect to the network wireless Toshiba Satellite A105 PC running Windows 7.  "Windows could not finish repairing the problem because it is impossible to perform the following action. Renewal of your IP address.  Works with Windows XP SP2, IE 8.00.6001.18702 file, I think that Version 3.  It has been installed on a disk provided by Microsoft after that old installation became corrupt (in the sense of Microsoft technical support.)  Before that, wireless network worked well.   (So unable to connect to the Internet for updates.)   Have tried to change the other settings and different messages acquired when it SHOWS that I am connected but cannot connect because of something to do with the certificate.  I don't remember what I did to try to solve this problem in the last days.

  I should add that I have tried the solutions of the previous forum on this topic, and none worked.

  Hi Marilynnla,

  Sorry to hear about the bad experience you encounter. Lets see if the network problem can somehow be archived.

  Read this article and follow the steps. Lets see if it helps in any way.

  How to troubleshoot wireless network connections in Windows XP Service Pack 2 (Works for Windows XP SP3 as well)

• After a virus, I am unable to connect to the internet. Event log messages: the NetBios over TCP/IP service failed to start due to the following error...

  original title: NETBios TCPIP of missing in Device Manager

  I recently had to run two antivirus programs on an infected computer and am now unable to connect to the internet. When I went to the event viewer, I noticed the following error messages:

  Event type: error

  Event source: Service Control Manager

  Event category: no

  Event ID: 7000

  Date: 16/01/2012

  Time: 12:31:17

  User:                       N/A

  Computer: JARRIOUSSTUDIO

  Description:

  The NetBios over TCP/IP service failed to start due to the following error:

  The service cannot be started, either because it is disabled or because it has no enabled devices is associated to him.

  Event type: error

  Event source: Service Control Manager

  Event category: no

  Event ID: 7001

  Date: 16/01/2012

  Time: 12:31:17

  User:                       N/A

  Computer: JARRIOUSSTUDIO

  Description:

  The DHCP Client service depends on the NetBios over TCP/IP service which failed to start because of the following error:

  The service cannot be started, either because it is disabled or because it has no enabled devices is associated to him.

  Event type: error

  Event source: Service Control Manager

  Event category: no

  Event ID: 7001

  Date: 16/01/2012

  Time: 13:32:01

  User:                       N/A

  Computer: JARRIOUSSTUDIO

  Description:

  The DHCP Client service depends on the NetBios over TCP/IP service which failed to start because of the following error:

  A device attached to the system does not work.

  Event type: error

  Event source: Service Control Manager

  Event category: no

  Event ID: 7001

  Date: 16/01/2012

  Time: 13:32:01

  User:                       N/A

  Computer: JARRIOUSSTUDIO

  Description:

  The helpdesk TCP/IP NetBIOS depends on the NetBios over TCP/IP service which failed to start because of the following error:

  A device attached to the system does not work.

  When I look in the Drivers folder, I see netbt, but devices & Non Plug and Play Devices, of TCPIP NETBios is not listed in Manager.

  Hi Diddy Dell,

  Follow these methods.

  Method 1: Performs a search using the Microsoft safety scanner.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Method 2: Follow these steps:

  Step 1: Start the computer in safe mode with network and check if the problem persists.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Step 2: If the problem does not persist in SafeMode with network, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 3: Follow the steps in the article.

  How to reset the Protocol Internet (TCP/IP)

  http://support.Microsoft.com/kb/299357

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

• Cannot open the synaptics pointing device in windows vista, upgrades are far but message error, unable to connect to the synaptics pointing device

  Hi I have a problem with my mouse/pointer when I click on the mouse to open it I have error message unable to connect to the synaptics pointing device. Have you checked the updates that are up-to-date, and the driver is ok, not sure what to try next need to make any changes to the mouse pointer

  with Brice thanks.

  Hi paiyay,

  Thanks for posting in the Microsoft Community.

  I understand that you are unable to open the synaptics pointing device in windows vista

  · You did changes to the computer before the show?

  · What happens when you click the Yes button in the error message?

  · You are able to use the mouse on the system?

  I suggest you uninstall the software from programs and features and then try to open the properties of the mouse and check if you are able to open the mouse properties then I would you recommend to uninstall the drivers that are installed on the system in the Device Manager and then download the drivers from the link below and check if the problem is resolved.

  http://www.Synaptics.com/support/drivers

  http://www.Synaptics.com/resources/drivers

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Connect the hard disk, and then try running the fix tool of the article below and check out them.
  Hardware devices do not work or are not detected in Windows
  http://support.Microsoft.com/mats/hardware_device_problems/

  I suggest you to contact the mouse manufacturer for assistance. Click on the link below.

  http://www.Synaptics.com/

  See also:

  FAQ and troubleshooting

  http://www.Synaptics.com/resources/consumer-tips