Connectivity to Active Directory/network of remote desktop resources

Similar Questions

• Connection error Active Directory Windows Server R2 2012

  Hello

  That's my problem, I have two servers both running Windows Server R2 Datacenter 2012 I installed AD - DS on one of them and allow the installation to configure the DNS settings, this server is also a DHCP server. On the server I want to connect to AD, I address DNS pointing to my AD server which is 192.168.1.60 and it's also getting an IP address from the DHCP server. But it connects to Active Directory, when I try the ping command on the domain name which is yewman.email he's trying pings an external IP address (which is my public ip address because I also have the yewman.email of real estate) how to fix this? It's the mistake of connection AD:

  Note: This information is intended for a network administrator.  If you do not have your network administrator, notify the administrator that you have received this information, which has been recorded in the C:\Windows\debug\dcdiag.txt file.

  The following error occurred when DNS was questioned about the resource record (SRV) service location used to locate an Active Directory (AD DC) domain controller for the domain "yewman.email":

  The error was: "the DNS name does not exist."
  (0x0000232B RCODE_NAME_ERROR error code)

  The query was for the SRV record for _ldap._tcp.dc._msdcs.yewman.email

  Common causes of this error are:

  -The DNS SRV records to locate an AD DC for the domain are not registered in DNS. These records are automatically saved with a DNS server when an AD domain controller is added to a domain. They are updated by the AD DC at set intervals. This computer is configured to use DNS servers with the following IP addresses:

  192.168.1.60

  -One or more of the following areas do not include delegation to its child zone:

  yewman.email
  E-mail
  . (the root zone)

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• Looking for a TV compatible projector network or remote desktop

  Does anyone know any model for TV which have integrated network layout and support the network of Windows Vista/7 projector or the Remote Desktop Protocol?

  Hello

  You may need to use your favorite search engine to get the details of television that can support the projector network or remote desktop.

  DISCLAIMER of THIRD PARTY SOFTWARE: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

• Unable to connect to Active Directory through ODI topology Manager

  Hello
  
  We are trying to connect to Active Directory if Manager ODI topology.
  The details given are:
  
  + 1. LDAP (JNDI) using driver:+.
  
  user name: CN = Administrator
  JDBC driver name: com.sun.jndi.ldap.LdapCtxFactory
  URL JDBC: ldap://ten.mydomain.com:636 / dc = oracle, dc = com
  
  I get the error as shown below:
  
  java.sql.SQLException: no driver appropriate
  
  at java.sql.DriverManager.getDriver (unknown Source)
  
  at com.sunopsis.sql.SnpsConnection.u (SnpsConnection.java)
  
  at com.sunopsis.sql.SnpsConnection.a (SnpsConnection.java)
  
  at com.sunopsis.sql.SnpsConnection.testConnection (SnpsConnection.java)
  
  at com.sunopsis.sql.SnpsConnection.testConnection (SnpsConnection.java)
  
  * 2. Driver JDBC Sunopsis for LDAP: *.
  
  User name: cn = Administrator
  JDBC driver name: com.sunopsis.ldap.jdbc.driver.SnpsLdapDriver
  URL for the JDBC driver:
  JDBC:SNPs:LDAP? ldap_url = ldap://ten.mydomain.com:636 / & ldap_password = abcd1234 & ldap_basedn = dc = oracle, dc = com
  
  
  We also tried with the URL: jdbc:snps:ldap? ldap_url = ldap://ten.mydomain.com:636 / & ldap_basedn = dc = oracle, dc = com
  
  We get an error, as shown below:
  
  Java.sql.SQLException: A NamingException held saying: ask: 1 cancelled with this explanation: ask: 1 cancelled and this name remaining: null
  
  at com.sunopsis.ldap.jdbc.driver.i.e (i.java)
  
  at com.sunopsis.ldap.jdbc.driver.i.a (i.java)
  
  to com.sunopsis.ldap.jdbc.driver.SnpsLdapConnection. < init > (SnpsLdapConnection.java)
  
  Do I misconfigure anything? Do I need to install a driver for this?
  Please, help me in the present.
  
  Thanks in advance for any help.

  LDAP user Root by default is to have all the privilege of access to all Ldap data.

  Go to the physical architecture and insert a new dataserver

  User - cn = root, dc = css, dc = hyperion, dc = com [change this according to your requirememnt for you it will be * cn = Administrator, dc = oracle, dc = com *]

  password - null

  JDBC

  driver JDBC: com.sunopsis.ldap.jdbc.driver.SnpsLdapDriver

  JDBC URL: jdbc:snps:ldap? ldap_url = ldap: / /.

  [for you it will be * jdbc:snps:ldap? ldap_url = ldap://ten.mydomain.com:636 / & ldap_password =ldap_basedn = dc = oracle, dc = com *]

  Here the default Ldap for the ROOT password is SECURITY and if it has changed or that you use for another user. Please use it.

  you will also need to encode the password by using this command

  Java - cp C:\OraHome_1\oracledi\drivers\snpsldapo.jar com.sunopsis.ldap.jdbc.driver.SnpsLdapEncoder

  Thereafter test connection and you should be able to connect successfully.

  Thank you

• Remote Desktop Session Authentication connects to Active Directory

  Hello

  I would like to know when a Remote Desktop session is happening between two workstations in an AD domain, is an event recorded in the ad servers and if so, what is the category and event code.

  Thank you very much

  Hello

  Please post your question in Server TechNet Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Unable to connect to the desktop computer running Windows 7 laptop running Windows 7, both in my home network, using remote desktop

  My desktop (host) is running Win7 Pro and my (client) laptop is running Win 7 Home Premium. For the office, I went to the control panel and allows remote connections. When I try to connect with the laptop in my same home network, I get an error message: Remote Desktop cannot connect to the remote computer you for one of the following reasons:

  (1) remote access to the server is not enabled

  (2) the remote computer is disabled

  (3) the remote computer is not available on the network

  Now, the computer is on and I can see what he listed as one of my computers on network. In fact, I accessed the command of remote desktop by right-clicking on the desktop in the list of networks and by selecting Remote Desktop in the menu dropdown.

  Obviously, I am missing something or something wrong. Please help me to understand.

  What do you call the remote [DRC] host desktop desktop machine, IE. local LAN IP static, the laptop?

  See this help as possible...

  http://theillustratednetwork.MVPs.org/RemoteDesktopTroubleshootingChecklist.html

• Website connection to active directory

  I created a new Web site in Dreamweaver and want to know if I can connect to a server in active directory. I use active directory to connect to the new site, the identification information. How can I do this?

  Looks like put you the cart before the horse.

  You just add a database to a site.

  Phase 1 - project planning.  This is where you decide what features and functionality you need for the site.

  Phase 2 - planning & data entry database.  Create and add content to the database.

  Phase 3 - programming of the Backend.  It's when you generate the code server-side and nuts and connections to databases.

  Phase 4 - test and debugging on the local test server.

  Phase 5 - design (what people see).

  Phase 6 - Frontend coding with backend connectivity

  Step 7 - test and debugging on the local test server.

  Step 8 - launch on the production servers.

  EDIT: This forum censors the word a-s-s-e-s-s

  Nancy O.

• Client VPN blocks inbound connections from remote desktop?

  I am running Vista x 64. To connect to a VPN Windows via the built-in VPN client works except that it seems that all incoming connections from the local network (including remote desktop) are blocked.

  Is this a known problem or design? It is a problem for us because the computer that is running the VPN client is a virtual machine running in hyper-v, so accessible by users via remote desktop - only connection to the console of the hyper-v Server is not an option.

  Are there alternatives?

  I am running Vista x 64. To connect to a VPN Windows via the built-in VPN client works except that it seems that all incoming connections from the local network (including remote desktop) are blocked.

  Is this a known problem or design? It is a problem for us because the computer that is running the VPN client is a virtual machine running in hyper-v, so accessible by users via remote desktop - only connection to the console of the hyper-v Server is not an option.

  Are there alternatives?

  It sounds like the question to split the tunnel . On the VPN client you can enable/disable split tunneling. See this article for help with that.

  http://TechNet.Microsoft.com/en-us/library/bb878117.aspx

  Note the security ramifications...

  In addition, I can not comment on this issue and a virtual machine, so as always YMMV...
  MS - MVP Windows Desktop Experience, "when everything has failed, read the operating instructions.

• What is the difference between the activation of remote desktop and adding a 'connection in network connections.

  What is the difference between the activation of remote desktop and adding a 'connection in network connections.

  Hi ChadCrowell,

  Remote Desktop connection allows remote control of your Windows XP Professional computer from another computer running Windows XP Professional or an earlier version of Windows.

  Reference: How to use the Windows XP Professional Remote Desktop feature?

  By creating an incoming connection, a computer can act as a remote access server is running Windows XP Professional, Windows 2000 Professional

  Reference: To make an incoming network connection

  Hope the helps of information.

• Try to use remote desktop to connect to a computer in safe mode with networking

  I'm trying to troubleshoot a remotley pc on the network using remote desktop. I can connect properly, however, I want to continue to solve the problems with the pc remote in safe mode. When I choose to restart the pc in safe mode with network remote I am unable to connect to this computer by using remote desktop. Is there a certain config that I need to put in place inside msconfig which will restart in safe mode and I would still like access to connect to this computer by using remote desktop. Thank you.

  Hello

  @hoosier1077

  Assuming this isn't a general network problem (such as restarting changes to the local IP address on the remote computer).

  Maybe this can help.

  http://support.Microsoft.com/kb/315222

  http://support.Microsoft.com/kb/316434

• Unable to connect to computers via Remote Desktop on the VPN connection.

  I have a Windows Server 2003 Active Directory network. Connect you to it remotely using an appliance, Sonicwall TZ170 VPN/Firewall DHCP pointing our internal DHCP server so we do not use the Sonicwall DHCP over VPN.

  The area has been recently rebuilt completely charge and the VPN connection was stronger than it has ever been when connecting to computers on our network for the first 2 weeks. In the last few days, however, people had problems connecting on our desktop computers. They can connect to some but not to others, and in the case of a person who needs in particular access to a computer, it can not connect to it all.

  I don't think it's a VPN issue but something to do with the DHCP/DNS/domain controller server. However, I am not able to locate the problem.

  In the past, this same thing was a problem before I took over. We had just a matter to the inconsistency of the connection until I thought I had solved the problem (however short-lived the fix was) with the refurbishment of the domain controller.

  Customers are a mix of Windows XP and Windows 7.

  Any ideas? I will provide all the information I can.

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

  Please repost your question in the above Server Forums.

  Here is the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• Unable to access Remote Desktop on my computer at home, when the network is set to Public.

  I have a computer set up at home as a hobby-Web server, designated 'Server', Windows 7 Professional (Swedish language version). The server has installed Norton Internet Security. Standard port in the firewall is open to allow remote desktop connections.

  I can't connect to the server by using remote desktop, unless...

  When I open the network - and center of the share on the server, under view your active networks, my internet connection ('designated network 8' by Windows) has the value 'Public network '.

  I can not connect to the server.

  If I change "Network of 8" to "Home network" or "Work" - so I can connect to the server by using remote desktop.

  But if I put the adapter network/public IP of my server to "Home network", is not my compromised security more than it already is when I encouraged Remote Desktop? I don't want to let my Internet connection to the home network, because the point of having different settings is because I want to have my internal network to a lower level of security for access to the network drive.

  Hello

  Thanks for posting your query on the Microsoft Community.

  According to the description, I understand that you have a query.

  I suggest you re-post your query on The TechNet Forums because we have experts working on this type of questions and for you help the better.

  Check out the link:

  https://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro

  Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.

• Remote Desktop connection abandons the connection permanently

  When I connect to my office with Remote Desktop constantly gives up the connection in a few minutes. I have Windows Vista. I heard there were problems with Vista and this program. Someone has the answer on how to fix this? I can connect with my Wired PC without any problem. Thank you!

  Hi Drifter5,

  Welcome to Windows Vista answers Forums!

  You can try the following steps and check if you can solve the problem.

  Here are a few possible causes of connection problems:

  The port of remote desktop can be blocked by a firewall.

  If you are using Windows Firewall, follow these steps:

  1. open the Windows Firewall by clicking the Start button, click Control Panel, clicking Security, and then clicking Windows Firewall.

  2. click allow a program through Windows Firewall. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  3. Select the Remote Desktop check box.

  If you are using another firewall, make sure that the port (usually port 3389) remote desktop is open.

  Remote connections might not be enabled on the remote computer. To resolve this problem:

  4. on the remote computer, click the Start button, right-click computerand then click Properties.

  5. in the left pane, click remote settings. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  6. under Remote Desktop, click allow the connection of computers running any version of remote desktop or allow the connection of computers running with NLA authentication remote desktop.

  7. click on OK.

  For more information, please visit the following links:

  http://Windows.Microsoft.com/en-us/Windows-Vista/changing-remote-desktop-settings

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Remote-Desktop-problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/Remote-Desktop-connection-frequently-asked-questions

  If you use a wireless connection, then try to configure Windows to manage your network connections.

  For more information, you can consult the following link:

  http://TechNet.Microsoft.com/en-us/library/cc505913.aspx

  Hope this information is useful.

  Jeremy K

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• about Remote Desktop connection

  What is remote desktop connection? How can we create remote desktop connection? How can we date or file in the network computer in the domain name server, we have created? If the connection is wired how can reconnect interrupted sudden on desktop connection remote connection? what the network discovery & network location? What is command prompt, how can it helps us to get information on the connection of the computer on the network?

  Hi Berhanu,

  Thanks for posting your query in Microsoft Community.

  Remote Desktop connection is a technology that allows you to sit in front of a computer (sometimes called the client computer) and connect to a remote computer (called the host computer) in a different location. For example, you can connect your computer to work from your home computer and have access to all of your programs, files, and network resources as if you were in front of your computer at work. You can leave programs running at work and then, when you get back, you can see the desktop of your computer work displayed on your computer at home, with the same programs running.

  I would refer to the article below for more helpful information and Setup.

  Remote Desktop connection: frequently asked questions

  Connect to another computer using Remote Desktop connection

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

• How to create the home group and how to connect two computers that are running windows 7. and also Remote Desktop connection!

  Someone help me how to create the home group and how to connect two computers that are running windows 7. and also Remote Desktop connection!
  step by step information!

  Hello

  I suggest you to refer to the links and check if it helps:

  Create a homegroup

  http://Windows.Microsoft.com/en-us/Windows7/create-a-HomeGroup

  Join a homegroup

  http://Windows.Microsoft.com/en-us/Windows7/join-a-HomeGroup

  Setting up a network home

  http://Windows.Microsoft.com/en-us/Windows7/setting-up-a-home-network

  Remote Desktop connection

  http://Windows.Microsoft.com/en-us/Windows7/products/features/Remote-Desktop-connection

  What types of connections remote desktop should I allow?

  http://Windows.Microsoft.com/en-us/Windows7/what-types-of-Remote-Desktop-connections-should-I-allow

  Remote Desktop connection: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/Remote-Desktop-connection-frequently-asked-questions

  Let us know if it helps.