Consider the purchase of C8180 All in One Printer...

Similar Questions

• Photosmart C8180 All-in-One printer that turns off completely in the middle of printing.

  I have a Photosmart C8180 All-in-One printer that powers completely in the middle of printing, wasting time, paper and ink. It restarts also sometimes more and more and more and sometimes it stops and all the lights blink quickly, show an on-screen error code. During these periods, the power button seems useless. I use the printer with a HP Pavilion dv7 laptop running Windows Vista and an HP / Compaq Presario Windows XP.

  When the C8180 works correctly, it's great. But I can't allow myself to be play roulette of the printer. Help, please. Thank you.

  Thanks to kkcb9395 for your help.

  Unfortunately, I have not found a solution to fix my HP C8180. The 800 number only referred me to another number (866-234-1377) where someone in India tried to sell me a phone support or a new printer. Phone support will not fix a burned capacitor and the new printers HP scan slides. Not to mention the $100. new ink I'll have to eat if I can't solve this problem.

  For anyone who has followed this thread and interested in your own C8180 setting here is a link to a parts list.
  http://www.partshere.com/hppartslist/hpparts.asp?part=L2526A
  If you find a repair manual, let me know.

  I am a customer of HP for HP CEO and longtime who think they have the customer service thing down, I'm on my way to buy an Epson.
  Thanks again for your time.

• Incredible problems to get the new workgroup C8180 All-in-one

  I bought a C8180 All-in-one printer to the end of September. When I plugged in and installed the software, everything seemed to function OK (I didn't test printing from the computer at the time), but after a short period of time to print Microsoft Word and Wordpad failed, started working and then failing again every time I reinstalled the software to try to solve the problem. Then began a long series of emails with HP technical support. In the next two weeks I have uninstalled and reinstalled the software 6 or 7 times in several different ways, under the instruction of HP. But he never could get Word and Wordpad works correctly. Finally, once again, under order of HP, he worked with a fake installation of HP Deskjet 990c printer. Then I noticed that it was more possible to digitize documents and slides to the computer, except by using a chip memory such as an intermediate storage. Then I went on vacation after spending about 30-40 hours two weeks previous emailing and calling the HP technical support.

  Back from vacation in the third week of October, I took the issue once again with HP support. Yet once, I spent hours and hours writing emails and reinstalling the software but to no avail. HP finally proclaimed this a problem difficult and said that it would increase the level of support. A gentleman named Sylvester who sent someone would phone a day pre-arranged to see more advanced techniques could be applied to the problem. Needless to say that the phone call came not despite my cancelling several meetings to wait in it (I should have better that they had promised to phone back me several times before and has never done).

  Finally, I called customer service to the local office of HP. (At least you can get to them without having to listen to the music for half an hour for the price of 5 p / minute.) They said that they would ensure someone would contact me and would monitor the call to ensure that happened. A week later I ' d has received no call, and I went to the local customer service. Has been raised to the top level of management, and finally, after a few reminders more than me, they managed to get a senior technician, called Natheem, in their technical service Cap to call me.

  He has been very helpful (and actually phoned me several times), and finally he forced me to go through the complicated process of getting Microsoft in India (via a conference telephone with Cape Town and myself - apparently it would have cost me a lot in telephone charges, but I have not had the Bill) to give advice on how to spend my Windows XP with service pack 2 and my internet explore to IE6. I reinstalled the C8180 software once again. No difference, still the same problems, except that now, Microsoft Word would work with the HP C8180 printer driver.

  At this point, Natheem said that it must be a hardware fault and arranged for the device must be replaced.

  The new unit arrived last Thursday. I again carefully uninstalled and reinstalled the software, connected to the machine and got the same problems, but once again with Microsoft Word cannot print with the C8180 printer drivers.

  I tried to contact Natheem again once in Cape Town this afternoon. After half an hour of expensive music additional I have with a person named Waleed who said that Natheem is on a call but he would get to call. No call came.

  So on the forum, I would like advice on what to do with a new HP C8180 All-in-One printer which:

  1. not print Word documents (except by using a printer deskjet 990c driver)
  2. used to scanning documents or transparent to the computer
  3. will not print photos from the computer using HP photosmart essential, or other photo editing software

  I'm also rather fed up of the assistance provided by HP. When you get through them they always try to help, but pass through, especially for someone who knows your case is more frustrating (and costs). In an attempt to get the thing, I also had to downgrade my computer Windows XP service pack 2 OS and my internet explore to IE6. I spent probably 50-60 + hours of the last two months, trying to get the thing work.

  Any advice on what to do next would be welcome.

  BobA

  Hi David,

  Well, my story has a happy ending. I stopped trying to untangle the printer after a whole month of working hours, including a lot of phone calls to the SA and responidng to dozens of emails. But then I bought my wife a laptop Toshiba for Christmas - and it worked perfectly first time. In any case, my computer was in a bit of a mess especially when the messing around I had done on this to HP support, so I decided to reload my operating system (after reformatting hard disk), I just finished. And guess what the C8180 works perfectly (at least until now anyway)! I just updated my OS to SP2 (according to HP support the C8180 has problems with SP3), and I kept my Internet Explorer version 6 (higher versions - 7 I think - again can cause problems according to HP support). I somehow use Firefox. But now its work, its quite an impressive machine.

  I want to say individual personnel in support of HP thin is always very friendly and helpful. It's just a phone, it costs and often listen to music for a long time, its very difficult to get hold of the same person again, if you spend hours to repeat the details of your problem, and despite vehement promises they call you rarely back - probably because they are too busy. His support system which is very poor, not the support staff.

  In any case you have a different problem. If your printer does not work on computers with different operating systems. I would say that you have good arguments to either get a new printer or your money under the guarantee.

  Good luck

  BobA

• HP Photosmart C8180 All-in-One printer works is not on the desktop (Windows XP). Works on laptops.

  HP Photosmart C8180 All-in-One printer has suddenly stopped working on my desktop (Windows XP). When I try to print, it just says: error and blocks the QC. I finally have to cancel and delete. It's as if the driver was uninstalled itself. I tried to reinstall with the original disc. However, it will not work and only says I have a newer version already installed on my computer. There are several products from HP on my add/REMOVE list. I tried to uninstall and reinstall. I hit the uninstall, it only flashes, but never uninstalls. Due to the fact that I had a previous HP printer on my computer before buying it, I thought that it can receive signals confused. How can I delete all Hp software and start again? BTW, this printer will work on all laptops in the House, who are also Windows XP.

  Revo uninstaller allows you to uninstall the s/w

• HP Photosmart C8180 All-in-one Printer

  Hello

  I have a blue screen on my HP Photosmart C8180 All-in-one printer with a code of B3D3F8A8. HP Tech indicate that my printer is obsolete, and I need to replace. nobody there knows not what says this message and if I need to replace my printer?

  Thanks for the help.

  Try of the reset the printer as shown in this page.  Unfortunately, the error codes are not documented, if reseting the printer as described on this page is not enough you will probably need a new printer.

• 2543 all-in-One printer: what ink need a purchase for 2543 all-in-one printer (model name: D3A80A) Please?

  What ink need a purchase for 2543 all-in-one printer (model name: D3A80A) Please?

  61 HP cartridges are a pretty popular current model, I expect it would be stored in most places that carry the cartridges.  I did a search at Walgreens, about 3/4 of them had 61 cartridges in stock at Houston.

• The jet office 4315 all-in-one: printer plug on the Tablet?

  I have an apex Tablet and I would like to know if there is a way to connect my all in one printer for her so I can print from my tablet, I have a cord to hang them together but I'm assuming that could print from the tablet should I make the tablet to recognize the printer & I don't know how to do this. I used to use it with my desktop computer

  Hello

  Only a connected network printers are supported on a Tablet, the 4315 is a single USB printer and it is not supported by such a.

  Kind regards

  Shlomi

• HP Officejet 7310xi all in one: the HP Officejet 7310xi all-in-One Printer-t - y at - it a hard drive?

  The all-in-one printer HP Officejet 7310xi contains a hard drive?   So if, for the purposes of recycling how to remove or disable otherwise?  Thank you.

  There is no hard drive in the Officejet 7310xi.  Verify that no memory card is inserted in the memory locations in the lower right front side of the machine.

• How to get the Dell 944 Photo all-in-one printer driver to work

  I just bought the Inspiron 580 and am trying to use my existing printer (Dell Photo All in One 944) how to download correct driver for the printer to work with the new computer?

  S Pipkens,

  First run delete print jobs to remove all print jobs stuck in the queue.

  Unplug the printer.

  Download and run the patch (utility cleaning printer) untip it prompts you to restart your computer.

  Restart your computer. Make sure that the printer has been deleted. Driver Manual printer removal

  Download and install the proper drivers from...

  Reference Dell 944 all-in-One Printer owners thread (W7) (Patch is also located here)

  Firewalls and anti-virus programs will block communications.

  Rick

• Problem with the HP Photosmart C7280 all-in-one printing. Ink system failure could not copy-

  I'm having a problem on my HP Photosmart C7280 all-in-one printing. The following message appears, this is what came on the screen of the printer: ink system failure has not not able to copy, receive faxes or print. Refer to the documentation for the printer error O.cl9a0007.

  Does anyone have any suggestions?

  Hey Spider! First of all welcome on the forum.

  I recommend to remove all ink cartridges, disconnect the USB cable from the computer that connects to the printer and then turn off the printer completely by unplugging the power cord. Then, restart your computer. Turn on the printer but leave that he disconnected from the computer. After that he ended his power over the cycle forward and reinsert the ink cartridges in the printer and make sure their seat correctly.

  After you have all the cartridges in the printer correctly, then connect it to the computer. See if that fixes the problem. If not post back with no results.

  Thank you

  SeanS

• is the 7510 HP e-all in one printer compatible with bluetooth items series?

  Can you send pictures from a mobile phone with bluetooth capability to a HP e - ALL IN ONE printer series 7510?

  Hello

  Your phone uses the different operating system, unfortunately I can't find it in this list:

  http://WWW8.HP.com/us/en/products/smart-phones-handhelds-calculators/mobile-apps/app_details.HTML?app=TCM:245 - 1044333 & platform = tcm:245 - 1044335

  But you can always send from your phone to your printer.

  Kind regards.

• steps to enlarge the copy using L7750 all-in-one printer

  Can someone walk me through step by steps to 'expand' copy to my Office Jet Pro L7750 printer all-in-one? Although your that someone can share the steps to "reduce" a copy as well? Thanks for all help!

  Hi RogS,

  I'd be happy to get you extra little information, it may just take me a few days I can send you by mail or e-mail, but I can post here for you in the forums

  Bear with me and I'll post at the time where I got what you are looking for!

• No Windows 7 driver for the hp officejet 5510 all in one printer?

  Hi I have an old HP OFFICEJECT 5500 SERIES ALL-IN-ONE (the model is 5510).  I bought it for my original DELL XP in 2004.  He worked especially well when I transferred to my next OS from VISTA DELL (less some functions) but the impression was very good.  Now my new DELL XPS 15z Windows 7 operating system is unable to locate a driver for it.

  What does that mean?  It's such a great printer - that is to say not one disposable.  It will not work in this environment?   I looked everywhere for a driver (on my system and on the internet).  Windows said to contact the manufacturer.

  Thank you

  Hello

  Your printer is compatible with Windows 7 and should work immediately by plugging the USB cable.

  As you have a few questions, follow the document below to get your printer working:

  http://support.HP.com/us-en/document/c01796879

  I suggest you follow How can I make sure that I always have the latest driver for OS Windows 7 first, then plug in the USB cable and check progress.

  If the problem continues without change, follow what can I do if the driver installation failed.

  Hope that helps,

  Shlomi

• I have a problem with the HP psc 2210 all in one printer.

  My printer is an hp psc 2210 all-in-one

  All main buttons are flashing and the message on my reading of the printer (Remove and check cartridge) t - it means to clean?

  Hello

  Equip your number of printer model to this site of HP drivers and support for this information and follow the troubleshooting steps for it.

  http://WWW8.HP.com/us/en/support-drivers.html

  Or ask in the Forums of HP's Support.

  http://h30434.www3.HP.com/PSG/

  See you soon.

• How to set up printing wireless Photosmart C8180 All-in-one printer.

  My os is Windows 7 64 bit.

  I want to make my printer wireless.  I had it connected to a USB port and after disconnecting I do not know what com to use.

  The easiest way is to connect your printer to your router with an Ethernet cable.  If this is not possible, you can create a wireless connection to the router.  On the front of the printer: Setup > network > Wireless Setup Wizard.

  Once the printer is connected to your network (wired or wireless, it is indifferent), go to start > Control Panel > printers and delete all instances of the printer.  Next:

  1. make sure the printer is on and connected to your network. Verify that you can access the printer's internal web page by accessing its IP address before continuing. Get the IP address of the printer on a wireless network Test page, printed on the menu of the network printer.
  2. click on > start > Control Panel > printers.
  3. click on add a printer
  4. Select local printer
  5. Select create a new port and select Standard TCP/IP Port, and click Next.
  6. under device type, select TCP/IP Device. Under the name of host or IP address, enter the IP address of the printer. Click Next.
  7. Select Hewlett-Packard in the list of manufacturers and select and select your printer model. Click Next.
  If your printer model is not in the list, then select disk provided, browse the CD that came with your HP printer and select the first file begins with hp and ending with INF. click Open, then OK. Select your printer model. Click Next.
  8. If prompted, use the driver that is currently installed.
  9. He will ask the name of the printer - enter a new name or use the one existing. This will be the name of the printer that you select from other applications.
  10. we may ask you to share the printer. Choose No.
  11. the printing area of Test Page is displayed. Go ahead and print it out.
  12. click on finish.