Consistent capture of PRE 7.0, & Questions of edition

Similar Questions

• Pre-test: random question bypass

  Hello

  We were asked to do pre for a course, but with random questions to stop collusion

  Is there a work around?

  Renovator rgds

  Is not possible out of the box with the functionality of pre-test now available. In previous versions, I used question slides custom for this questions that I created using standard objects, where the score has not added to the total of the Quiz but stored in a user variable. But you have no question randomly either, so no possible. Don't see a workaround solution, unless you do not have to report to an LMS. Any questions at random, you have to use the normal question slides. It is possible to keep the score of the 'test' in a separate user variable, making decisions as branching based on this variable, create a slide of score as well for the pre-test and test but what a statement to an LMS that all quiz slides will be considered part of a Quiz and the score will be the total of all the slides in quiz score.

  Lilybiri

• Question about consistent errors in the event viewer XP Home Edition

  I ran a program called VEW looking errors up to twenty in the XP Event Viewer.

  Here is the data for the analysis of files:

  V01c Vino event viewer run on Windows XP in English
  Report run at 28/01/2012 23:42:23

  Note: All dates below are in the format dd/mm/yyyy

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  "System" Log - error Type
  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  Journal: "System" Date/time: 01/28/2012 22:48:06
  Type: error category: 0
  Event: 10005 Source: DCOM
  DCOM got error "% 1058" try to start the service NMIndexingService with arguments "" to start the server: {E8933C4B-2C90-4A04-A677-E958D9509F1A}

  Journal: "System" Date/time: 01/28/2012 22:47:40
  Type: error category: 0
  Event: 7023 Source: Service Control Manager
  Windows Driver Foundation - User-mode Driver Framework service terminated with the following error: a device attached to the system is not functioning.

  Journal: "System" Date/time: 01/28/2012 22:35:31
  Type: error category: 0
  Event: 7023 Source: Service Control Manager
  Windows Driver Foundation - User-mode Driver Framework service terminated with the following error: a device attached to the system is not functioning.

  Journal: "System" Date/time: 27/01/2012-22:49:54
  Type: error category: 0
  Event: 10005 Source: DCOM
  DCOM got error "% 1058" try to start the service NMIndexingService with arguments "" to start the server: {E8933C4B-2C90-4A04-A677-E958D9509F1A}

  Journal: "System" Date/time: 27/01/2012-22:37:21
  Type: error category: 0
  Event: 7023 Source: Service Control Manager
  Windows Driver Foundation - User-mode Driver Framework service terminated with the following error: a device attached to the system is not functioning.

  Journal: "System" Date/time: 27/01/2012-14:32:57
  Type: error category: 0
  Event: 7023 Source: Service Control Manager
  Windows Driver Foundation - User-mode Driver Framework service terminated with the following error: a device attached to the system is not functioning.

  Journal: "System" Date/time: 27/01/2012 03:38:23
  Type: error category: 0
  Event: 7023 Source: Service Control Manager
  Windows Driver Foundation - User-mode Driver Framework service terminated with the following error: a device attached to the system is not functioning.

  Journal: "System" Date/time: 25/01/2012-13:53:36
  Type: error category: 0
  Event: 10005 Source: DCOM
  DCOM got error "% 1058" try to start the service NMIndexingService with arguments "" to start the server: {E8933C4B-2C90-4A04-A677-E958D9509F1A}

  Journal: "System" Date/time: 25/01/2012-13:32:34
  Type: error category: 0
  Event: 7023 Source: Service Control Manager
  Windows Driver Foundation - User-mode Driver Framework service terminated with the following error: a device attached to the system is not functioning.

  Journal: "System" Date/time: 24/01/2012 23:35:59
  Type: error category: 0
  Event: 10005 Source: DCOM
  DCOM got error "% 1058" try to start the service NMIndexingService with arguments "" to start the server: {E8933C4B-2C90-4A04-A677-E958D9509F1A}

  Journal: "System" Date/time: 24/01/2012 23:21:10
  Type: error category: 0
  Event: 29 Source: W32Time
  The time provider NtpClient is configured to acquire time from one or more time sources, however none of the sources are currently accessible.  No attempt to contact a source will be for 14 minutes. NtpClient has no source of accurate time.

  Journal: "System" Date/time: 24/01/2012 23:21:10
  Type: error category: 0
  Event: 17 Source: W32Time
  Time provider NtpClient: an error has occurred during the DNS lookup of the manually configured peer 'time.nist.gov, 0x1 '. NtpClient will try the DNS lookup in 15 minutes. The error was: a socket operation was attempted to an unreachable host. (0 x 80072751)

  Journal: "System" Date/time: 24/01/2012 23:18:36
  Type: error category: 0
  Event: 7023 Source: Service Control Manager
  Windows Driver Foundation - User-mode Driver Framework service terminated with the following error: a device attached to the system is not functioning.

  Journal: "System" Date/time: 24/01/2012 02:15:46
  Type: error category: 0
  Event: 7023 Source: Service Control Manager
  Windows Driver Foundation - User-mode Driver Framework service terminated with the following error: a device attached to the system is not functioning.

  Journal: "System" Date/time: 24/01/2012-12:58:29 AM
  Type: error category: 0
  Event: 10005 Source: DCOM
  DCOM got error "% 1058" try to start the service NMIndexingService with arguments "" to start the server: {E8933C4B-2C90-4A04-A677-E958D9509F1A}

  Journal: "System" Date/time: 24/01/2012 00 h delighteth
  Type: error category: 0
  Event: 7023 Source: Service Control Manager
  Windows Driver Foundation - User-mode Driver Framework service terminated with the following error: a device attached to the system is not functioning.

  Journal: 'System' time: 23/01/2012 23:26:32
  Type: error category: 0
  Event: 7023 Source: Service Control Manager
  Windows Driver Foundation - User-mode Driver Framework service terminated with the following error: a device attached to the system is not functioning.

  Journal: 'System' time: 23/01/2012 23:26:19
  Type: error category: 0
  Event: 10005 Source: DCOM
  DCOM got error "% 1058" try to start the service NMIndexingService with arguments "" to start the server: {E8933C4B-2C90-4A04-A677-E958D9509F1A}

  Journal: 'System' time: 23/01/2012 23:02:41
  Type: error category: 0
  Event: 10005 Source: DCOM
  DCOM got error "% 1058" try to start the service NMIndexingService with arguments "" to start the server: {E8933C4B-2C90-4A04-A677-E958D9509F1A}

  Journal: 'System' time: 23/01/2012 18:28:49
  Type: error category: 0
  Event: 7023 Source: Service Control Manager
  Windows Driver Foundation - User-mode Driver Framework service terminated with the following error: a device attached to the system is not functioning.

  Journal: "System" Date/time: 24/01/2012 23:35:59

  Parameters of scanning has been:

  • System
  • Errors
  • 1-20 errors, valued at twenty.

  What are these errors and they are nothing to worry about?

  I have Nero 8 on this system and have an updated hosts file the running here: http://winhelp2002.mvps.org/hosts.htm

  Not sure, but I may have changed a network setting to activate the new hosts file work properly.

  Seen these errors for a while. system works well and smoothly.  No symptoms of malware or infection seen or found.  I would call these software errors as they seem does not affect the operation of the system.

  XP Home Edition SP3 P4 2.8 2 GB RAM

  Joe

  Oh yes :)

  I have never used the program VEW and don't think I will check it - I just look at the Event Viewer logs the old-fashioned way (manually) if I think that there is a problem, but that might just be the old me.

  It is true that XP Home doesn't have Group Policy Editor, but all policy settings are always available via the registry.

  Some malware will change your GP settings and cause problems.

  I have a little import registry will correct all the ones I know, so if someone has these symptoms, any flavor of XP, they are running, I'll just send the script because sometimes you will be not able to solve the problem, even if you have not the GP Editor.

  The registry always import work - and work well for XP Home or XP Pro.  If you have the symptoms and XP Home, what would you?   Start the import operation of the registry.

  If you're curious, off on my SkyDrive it is a spreadsheet Excel (Group Policy settings) who has all the parameters of GP and where they are in the registry.  I do not recommend start searching, but it is useful to know where things are if there is a problem.

  I would not allow the connection of a security XP stuff unless you think you're being attacked.  More and verbose logging slows things down.  My Event Viewer Security log is empty.

  Find the links to the Microsoft Support Engineer for the most part useless to actually solve a problem (because it help you with your problem), if someone has a question or point of Event Viewer, I usually just send them this:

  To view the logs in Event Viewer, click Start, settings, Control Panel, administrative tools, event viewer.

  A shortcut to the event viewer is to click on start, run and enter in the box:

  %SystemRoot%\system32\eventvwr.msc

  Click OK to launch the event viewer.

  The most interesting newspapers are usually the system and Application logs.

  Some newspapers such as security and Internet Explorer may be completely empty or have just a few items.  The default settings for XP wants do not connect all this activity, unless you need to solve a problem in these areas.  If you enable logging for them the papers fill up quickly and could adversely affect the performance of your system with all the extras (often unnecessary) activity.

  If you have Microsoft Office installed, it has its own newspapers, and they can be empty or occasional boring activity very little or, if there is no problem with your desktop applications.  It's normal.

  Not every event is a problem, some are informational messages that things work very well, and some are warnings.

  However, no event should defy reasonable explanation.

  Each event is sorted by Date and time.  Errors will be red Xs, warnings will have yellow! s.
  Informational messages have white is.  Not every error or warning event means that there is a serious question.

  Some are excusable at boot time when Windows starts.  Try to find only the events to the date and time around your problem.

  If you double-click on an event, it will open a window of properties with more information.  On the right are black up and down arrow keys to scroll through the open events. The third button that looks like two overlapping pages is used to copy the details of the event in your Windows Clipboard.

  When you find an interesting event that occurred at the time of your question, click on the third button at the top and arrows to copy the details and then you can paste the details (right click, paste or CTRL-V) the text in detail here for analysis.  Remove all personal information from your information after you paste If you are forced to do so.

  If you paste an event, it will look something like this annoying system startup event:

  Event type: Information
  Event source: Service Control Manager
  Event category: no
  Event ID: 7035
  Date: 14/07/2010
  Time: 17:54:18
  User: Jose
  Computer: computer

  Description:
  The Remote Access Connection Manager service was sent successfully a starting control.

  To get a fresh start on any log of the event viewer, you can choose to clear the log (the log backup is available), and then reproduce your problem, then just look at the events around your show and troubleshoot events that are happening when you have your question.

  You can search for events on the World Wide Web and get ideas.  It's where people events they see and then to the top of their questions, ideas and solutions:

  http://www.EventID.NET/

  If you find your event in the discussion, the first idea or discussion does not necessarily mean it is the "answer" to your situation, so read through all the ideas to find the one that sounds more like your situation.

• Dial backup VPN - pre-shared key question

  I use dial backup for my DSL connections in case of failure, but on my host router I also use EZVPN Client VPN access server. Thus the server EZVPN uses xauth for pre-shared key authentication:

  ISAKMP crypto key? address 0.0.0.0 0.0.0.0

  BUT for my backup of VPN connection to work, I need to use the dynamic IP to the IP address of the peer that requires:

  ISAKMP crypto key? address 0.0.0.0 0.0.0.0 no xauth

  I tried to set the keys for dial-in subnets, but it always seems to use the default value.

  Is this all just not supported or is there a workaround?

  My (main) the host router is a CISCO 1841, my remote router is 877.

  See you soon,.

  Sean

  You need to configure ISAKMP profiles on the server Ezvpn router.

  http://Cisco.com/en/us/Tech/tk583/TK372/technologies_configuration_example09186a00801dddbb.shtml

  Who would do it.

• Hello! Pre-filled form questions

  Hello!

  I'm very new to using Adobe and I try to do a pre-filled form interactive adobe. I have the boxes communicate/calculate the each other.

  For example, I have a Fahrenheit box which offers a Celsius area that computes the response at the entrance in the Fahrenheit box. The problem I have is when Fahrenheit is not applicable in certain uses of the shape, the Celsius box always responds to-17, 80 ° which is equal to 0 ° F, which is in the form is the answer because nothing has been typed. I need the box does not calculate when is not a response to enter.

  Can someone let me know the best solution for my problem?

  Thank you!

  First of all, stop thinking about it. What is the numerical value of a string NULL or mull?

  Many programs treat as zero. And that's exactly what JavaScript if left to itself.

  Fortunately, most computer languages and scripting languages have instructions conditional and properties, statements or methods that make the difference between a null and zero string. This type of coding will require that a custom JavaScript coding.

  I guess that you do not want to delete any results.

  For the Celsius box (text field), you must create a custom JavaScript that uses the conditional "if" statement to test whether the Fahrenheit entry field is an empty string and not zero.

  / default null result Celsius sring.

  Event.Value = "";

  get the object field for Fahrenheit on the ground;

  var oFahrenheit = this.getField ("Fahrenheit");

  test if string field value is zero;

  If (oFahrenheit.valueAsString! = "")

  {

  conversion of calculation only if the value of Fahrenheit not null;

  Event.Value = (oFahrenheit.value - 32) * 5 / 9;

  } / / end of non-null value;

• MS Outlook 2010 Add in Create pdf - does not capture the photos shows as question marks

  In MS Outlook 2010, add it to the Adobe PDF format.

  When it is used to create a pdf file it does not print images or logos in the e-mail in Outlook. Adobe converts it to Blue question marks.

  This problem over time because it was working fine before... Please suggest... other than a re-installation... a who has had this problem and is working on a solution... (not for points only!) - Please an answer, a solution or a State of the problem if you have experienced something similar.

  In the Adobe PDF in Outlook tab, you will find a button "change conversion settings.

  Click on that and you will see a "Download external content block" option in the "Settings" tab, uncheck the box which and see if it helps.

  If he does, remember to turn the option back on again once you have finished.

• Any who save a pre-installed Windows xp home edition that crashed...

  Hello
  My cousin had this pre-installed windows xp that the computer crashed recently, keep prompting
  for a recovery disc for repair, but this machine is pre-installed with a windows xp. Now to make
  the store that sold this machine went crashing too worse question. So what can he do to recover the
  computer? Thank you.

  Hi Daniel,.

  Thanks for bearing with me, now the recovery disc creator, is anyway I can enter the first hard disk.
  Or maybe some software I can download from microsoft? OOP! Sorry I ask, who cares about repair or
  maintenance of software, we sell only. Anyway, is that the recovery disk creator is something like the recovery console?
  I'm treating this horse dead as a direct. Anything radical might be considered.

• Newbie Question of editing items

  I have a 29-minute video that plays right into the Organizer, but when I try to change in the elements only 14 seconds are available.  What I am doing wrong?

  Thank you

  Kim,

  The VOB, seems to indicate that the disc can be a DVD-video (standard DVD to play on the computer with the software player, DVD, or on a standalone DVD player connected to a TV). Are these VOB files inside a folder VIDEO_TS, as well as some IFO and BUP?

  On a DVD-video, there should be a VIDEO_TS folder (and possibly an AUDIO_TS folder). If this is the case, then the first VOB should have all navigation, Menus, and then the first part of the MPEG-2 file, which can and usually will span the other VOB.

  However, the VOB is not created equal, like this article, John T. linked to, will be noticed. Most DVR (DVD recorders) will create a first VOB, which will give questions pre. It is because of their rudimentary navigation, which is rarely 100% compatible DVD. If this is the case, then use other software to rip MPEG-2 in the VOB container, will probably be the best course of action.

  Now, it could well be that someone has made a DVD Data disc and just copied the VOB's on a DVD-video.

  Also, to import VOB files, I copy them on a HARD internal (HDD) drive and import from there. This will do two things:

  1. Significantly speed up the import process
  2. Relieve you of having to have this DVD in the multi player, whenever you open your project

  Good luck

  Hunt

• Changin the lanquage on a pre-installed Windows XP Home edition package

  I bought a Samsung Netbook, which had home edition of Windows XP pre-installed on it.  It was a gift for my wife who speaks only in Portuguese.  I tried to do everything to get the system to operate in Portuguese.  Despite the indication of the language at the bottom bar showing PT (Portuguese) window shows everything, with a few minor exceptions, in English.  It's very frustrating for her and I don't know how to get this think working entirely in Portuguese.  Any help would be greatly appreciated

  Hello

  You can change the language of the computer by using the method listed in: http://www.microsoft.com/windowsxp/using/setup/winxp/yourlanguage.mspx

  I hope this helps.

• First 12 questions of edition

  1. What is the best selection of output to put a video on a DVD for playback on my HD TV through my DVD player?

  2. Select 1080i or 1080 p?

  3 should. What size I make my images that will be included?

  4. I plan to buy a UHDTV.  How it works with first 12?  Should I pre-plan my editing to make my images to the UHD although I'll also use it on the HDTV standard?

  Thanks Alan

  Alan

  Thanks for the information...

  The project preset

  Defined manually by you - how to manually set the predefined project before you import the source media is located at the bottom of the following

  First Elements ATR troubleshooting: PE11: accuracy of the project auto Preset setting (new project dialog box)

  NTSC

  DIGITAL SLR

  1080 p

  Digital SLR [email protected]

  Import your 1280 x 720p30 (16:9), import your 2933 x 2200 4:3 If you don't mind the black borders. If you don't want the stills with black borders, then crop and resize images fixed (up to 1920 x 1080) prior to importation.

  Burn to DVD AVCHD help

  Publish + share

  Disc

  AVCHD Disc

  with preset = H.264 1920 x 1080pNTSC Dolby (who will be 1920 x 1080 @ 23.976 progressive frames per second)

  Your Player supports than 1080 p. If this is not the case, then use your only alternative

  H.264 1920 x 1080iNTSC Dolby (who will be 1920 x 1080 @ 29.97 images per second interlaced)

  The configuration described above is made to focus on the pictures and getting them as strong as possible in the final product. Because you

  use with scale to the size of the selected image by default, the two Edit Menu/preferences/general video and stills will be predefined in a 1920 x 1080

  framework. The stills will have black borders if they are left to the 4:3 in this project of 16:9. Because the video is 16:9, it must complete this image of 1920 x 1080 with the default scale to the size of the existing framework. I'm not projecting any pixelation from 1280 x 720 to 1920 x 1080 in the conditions described.

  Please let me know if you're OK with that.

  Thank you.

  RTA

• Question to edit the newprods.txt file before you run AD splicer

  Hello
  
  I installed the patch for product KEY.
  And according to the patch (https://updates.oracle.com/Orion/Services/download?type=readme & aru = 11486871), I should edit newprods.txt to reflect the KEY user and usage pattern tablespaces before running adsplicer.
  
  But I have a question about changing the newprods.txt.
  And when I checked this patch file, here it is the content of the file.
  - - - - -
  # Add product, EMEA consultation locations
  
  product = key
  base_product_top = * APPL_TOP *.
  oracle_schema = key
  facteur_redimensionnement = 100
  # Spaces table it can be edited to fit the configuration of database
  main_tspace = CLED
  index_tspace = CLEX
  temp_tspace = TEMP
  default_tspace = CLED
  
  #
  # End control file
  - - - - -
  
  For example, I can leave this file as it is with the default values?
  Otherwise, I'm looking for a very specific to change orientation.
  Can someone help me with this, please?
  
  Thanks in advance,

  Salvation;

  You can use the default, or you can use as below

  product = key
  base_product_top = CLE_TOP
  oracle_schema = key
  facteur_redimensionnement = 100
  # Spaces table it can be edited to fit the configuration of database
  main_tspace = APPS_TS_TX_DATA
  index_tspace = APPS_TS_TX_IDX
  temp_tspace = TEMP
  default_tspace = APPS_TS_TX_DATA

  Please see:
  Re: Reg: produces apps

  Respect of
  HELIOS

• Question about editing a Dreamweaver template

  I used a #2 model of http://www.Adobe.com/devnet/Dreamweaver/articles/dreamweaver_custom_templates.html

  and have blurred by editing it and went 'ok' according to my criteria.

  Pending a question I have is how to something 'UNDER' my left navigation bar.

  If you look at my site http://mpalitigation.com/index.html you will see a waaaay button from paypal to the bottom on the left side, I was hoping

  to put this button under the links for navigation but not just with them.  I tried to do a crash course on the float, clear, etc... but

  the best I could do was clear after the navigation bar left float but then the content in the middle is pushed down under the end of the navigation bar.

  Any help would be appreciated.

  The CSS code is

  .leftnavigation {
      width: 192px;
      margin: 70px 0px 0px 0px;
      padding-left: 8px;
      float: left;
      list-style-type: none;
  }
  
  .leftnavigation a{
      margin-left: 0px;
      width: 156px;
      padding-left: 15px;
      padding-top: 5px;
      padding-right: 20px;
      padding-bottom: 5px;
      float: left;
      color: #364957;
      font-size: 10px;
      font-weight: bold;
      font-family: Verdana, Arial, Helvetica, sans-serif;
      text-decoration: none;
      background-image: url(images/nav_normal.jpg);
      background-repeat: repeat-x;
      background-position: 0px 0px;
      border-bottom: 1px solid #999;
  }
  
  .leftnavigation a:visited{
      color: #364957;
  }
  .leftnavigation a:hover{
      color: #ffffff;
      background-image: url(images/nav_down.jpg);
  }
  

  The page you linked is not a child of a DW model page.

  In any case, if I remove your PayPal form from its current location and place it like this (note the inline style), it seems to work OK.

  • HOME
  • SUBPOENAS
  • QUOTE
  • INVESTIGATIVE SERVICES
  • CUSTOMER LOGIN
  • CONTACT US

  method https://www.paypal.com/cgi-bin/webscr"="post"style =" width: 180px; " margin: 15px 0 15px 0; » >

  https://www.paypalobjects.com/en_US/i/BTN/btn_paynowCC_LG.gif' border = '0' name = "submit" alt = "PayPal - the safer, easier way to pay online how!" >

  https://www.paypalobjects.com/en_US/i/SCR/pixel.gif"width ="1"height ="1">

  Note that I also wrapped the combination of navigation and the form in a div container

• Question text Edition

  How can I find what font is used in an existing document, I need to change the text in?

  My apologies for the imprecision of the question:

  Adobe Illustrator noob, have open a .ai file my boss of the edited text wants in and would like to know how I can find out what are the existing text is written in so I can make some adjustments.

  Pikaria,

  ... opened a .ai file my boss of the edited text wants in and would like to know how I can find out what are the existing text is written in so I can make some adjustments.

  It seems that you have opened the file in Illy; If this is the case, there are two is:

  (1) the text is direct type, and you can simply select the (appropriate) text tool, click where you want to edit and start editing. the character palette/Panel will show you the police, but you're already working in it;

  (2) the text is the indicated Type and so only vector paths, and you can not change, so you will need to recreate the tool text (suitable); There is no information on the police, so you have to squeeze out those who created the work, or use one of the sites listed below or similar), or ask here or in the forum of typography;

  http://new.MyFonts.com/WhatTheFont/

  http://www.Identifont.com/

  http://www.WhatFontis.com/

  http://www.bowfinprintworks.com/ScriptIDGuide.html

  http://forums.Adobe.com/community/design_development/typography?view=discussions&start=0

  (2) the text is the indicated Type and so only vector paths, but the one who created the work was bright enough to keep a copy of the original direct Type, no doubt (on a) hidden (layer); in this case, you can show it off and use it / see who makes it.

  (Hope hope for 1) or 3).

• Question of editions allow the digital computer

  I have bought books that I can read on a computer that has a licensed version no digital editions.

  I want to buy a few pounds more that I need to be able to read on this computer and a laptop computer. So I think I need an authorized version of digital editions on both computers.

  When I go to allow the first computer, I get the message:

  "WARNING: If you have protected elements in your Digital Editions library on this computer, they will be more readable.

  So I'm worried that I lose all of my already purchased books.

  This seems to be a bug software/DRM on behalf of the software (even if she doesn't let me share the books of pre-approval, I shouldn't * loose * them if I allow my computer. sheesh.)

  Anyone here have a good solution?

  I've been in touch with technical support for several days, but they are very slow to respond... and don't seem to even write English very well.

  Thanks for any help!

  The upgrade of the named anonymous activation will work for AdobeIDs that have not already been used for DRM eBook accounts.

  According to your description, you have two computers (A and B).  On A, you have activated anonymously (no Adobe ID), on B, you have authorized to your AdobeID (lets call [email protected] for now).  You purchased the content on both computers.  If you were to allow the computer your AdobeID ([email protected]), then you will lose all access to the previous content on A computer.

  Note: ADE supports only authorization both by the user of the OS.  Exercise does not increase your number of activations and switching back and forth, you lose access to all your content.

  You have a couple of bad choices here:

  (1.) you can create a new AdobeID (let's call it [email protected] for now) and allow A computer with it.  You can then create separate user OS on both computers accounts and allow ADE on them the AdobeID appropriate (IE new user on the computer that would be allowed with [email protected]) and the new user on the computer that b would be allowed with [email protected].  You could then switch between OS users to view your content.

  2.) pick to abandon DRM and ask booksellers if you can get a new download links for the content associated with this account and then use the new account to re-download the.

• question on editions of database

  Hello
  
  I do not understand something: If there is a license for Oracle (which is expensive), if I download editions of Oracle 11g (standard/enterprise) on the site database, it means I use Oracle database illegal? So what I download is Enterprise Edition database. What about licenses then?
  
  I know Oracle XE is FREE, but Oracle Enterprise edition is not free? Because it can be downloaded and used several times.
  Please clarify for me in this case
  
  Thank you

  Your question implies you have not read the license document that accompanies the download, or you did not read the license agreement before clicking on the button "accept license".

  Download associate is a development license.
  This means
  -You may not use download for production purposes
  -you do not support
  -you don't get updates and hotfixes

  -----------
  Sybrand Bakker
  Senior Oracle DBA