Constant activity with L7780 wireless

I have an Officejet Pro L7780 all-in-One connected to my Linksys router wireless WPA2. My computer runs Windows XP Pro SP3 and is wired to the router.

I can print, etc. very well, but it seems to be almost constant activity communication between my computer and the printer - even when I'm not feeling. I can see the flashing lights on my router which tell me that my PC is in talks with the printer every few seconds. I can see corresponding activity on my PC Ethernet connection as well.

I have the HP Digital Imaging Monitor running in my region notofication.

My question is: is this activity of almost constant communication between my PC and the normal printer? I've never seen anything like this with any other printer or printers cable I can get through the router as a network printer shared. If the activity is not normal, how can I get it settled and only communicate when I print something?

Thank you.

the Monitor (DIM) digital imaging queries the printer regularly to update the status of the printer. in this way it can give you notice, if the printer is offline, or if the printer is having problems. If it affects the performance of your computer of your internet speed, so it's something to be worried, although no such problems have been reported before.

Tags: HP Printers

Similar Questions

  • I started having problems with the wireless mouse and the carpet of my laptop - Lenovo ThinkPad T420 mouse.

    Original title: right click on the mouse itself activating

    I borrowed a USB to a person at work and I started having problems with the wireless mouse and the carpet of my laptop - Lenovo ThinkPad T420 mouse. The left click of two devices works normally, however, sometimes she does not respond to clicks and it takes a few seconds to work. The left button was constantly starts to turn on, as if he was stuck. After that I hit Alt + Tab and modify windows it stops for a few moments and starts at a later date. I havo not found a specific condition or a combination of keys that may trigger the fault.

    I read a few posts on discussion forums, but all say that it could be a hardware problem, which I think is not, because both devices have the same problem and I'm sure it all started with the insertion of the borrowed memory stick. I scanned the readers to help Symantec's EndPoint Protection and installed Microsoft Security Essentials and performed a full scan, but found nothing. I even restored the system, but the problem remains.

    Should I get a different antivirus? How can I find the cause so I can find a better targeted solution?

    Try to install the drivers from this link and check.

    http://support.Lenovo.com/en_US/research/hints-or-tips/detail.page?&LegacyDocID=MIGR-77167

  • can I listen to music on the watch with a wireless headset while I swim laps?

    can I listen to music on the watch with a wireless headset while I swim laps?

    Short answer, Yes, but you will water proof wireless headsets. Not for the first watch of Gen.

  • Sharing activity with Apple Watch problem

    I added a friend to my shared items Apple Watch and went through all the stages of acceptance.

    However on my Apple Watch I can't see the results of my friend, but on my iPhone, I can see mine and theirs.

    On my friends iPhone and Apple Watch, they can see my results of activity, but all mine read as zero.

    Hi slithytove,

    Thank you for using communities of Apple Support.

    I see that you have added a friend on your Apple Watch to share activities. On your Apple Watch you don't see the results of your friend, but you can see the you and the results of your friends on your iPhone. They see your activity on their iPhone as zero.

    I just started using this feature myself. Watch OS 3 is really cool in how it allows you to share your activity with friends and family rings. I'm happy to help you with this problem.

    Please ensure that all iPhones who share the activity are connected to the Internet and signed in iCloud. Use article share your activity with your Apple Watch, more specifically, this section:

    Get help with sharing activity

    Activity sharing requires iOS 10 and watch OS 3. If more than one Apple Watch associated with your iPhone, the sharing tab appear not in the activity until you update all your watches to watch OS 3.

    If you are unable to add a friend, make sure you have a Apple Watch and that you have not added the maximum number of friends. You can add up to 25 friends.

    If your iPhone can connect to the Internet and you are connected to iCloud, you can get the updates relating to the activities of your friends every day. If your iPhone can not connect for several days, or you disconnect from iCloud, you may see missing days.

    Additional information can be found in the Apple Watch user's Guide

    Have a great day!

  • How can I check lock activation with an iPod touch 3rd generation

    How to check a lock of activation with a 3rd generation iPod touch which was given to me

    A third generation of iPod touch cannot be updated past 5.1.1 and will therefore never be activation locked; This requires iOS 7 or newer.

    (143866)

  • Need help with the wireless internet Power Book G4

    Hi-I recently inherited a Power Book G4.  I have problems to connect to wireless internet.  According to the Profiler systems, it has an AirPort Extreme card, but there is no icon on the screen wireless.  Advice to connect would be appreciated!

    Thank you-

    Stephanie

    The icon in the menu bar can be hidden or displayed.  The setting is the system network preferences pane.  Where it says display, select AirPort.  There is a checkbox for the State of AirPort show the menu bar.  Since the AirPort icon in the menu bar, you can select the a local wireless network to join.

    This pane of system preferences, you can use the more specific configuration settings, although the default settings work often unless you use special parameters with your wireless router.

    AirPort Extreme Card maybe for 802.11b and gand not n.  If your wireless network is configured for 802.11n only, you will need to change this setting to allow to 802.11 g (on the wireless router).

  • Hello Apple ID I opened gmail but when I'm active with their yahoo what should I do now?

    Hello
    Apple ID, I opened gmail but when I'm active with their yahoo

    What should I do now?

    Hello

    You ask your question in the iPhone forum.

    Do you jailbrake the iPhone?

  • I have an older iMac with airport wireless card, but it does not connect to the internet.

    I have an older iMac with airport wireless card, it sees my network but will not connect.  Any suggestions?

    Exactly, what iMac, what version of Mac OS X running?

  • When I do a race with my Apple Watch I don't have a frequency heart displayon the session screen. When I then sync my activity with my iphone there is also no average heart rate on the completion of my activity. How can I get my heart rate displayed?

    When I do a race with my Apple Watch I don't have a frequency heart displayon the session screen. When I then sync my activity with my iphone there is also no average heart rate on the completion of my activity. How can I get my heart rate displayed?

    Hello

    Mode power saving can be activated.

    To check this, on your iPhone, in the application of the watch, go to: Watch My > Workout - if it is currently enabled, disable power saving Mode.

    (When the power saving Mode is enabled, it disables the sensor of heart rate during workouts running).

  • iPhone 5 s can not active with the Apple ID

    My 5s iPhone has just been reset, however, I could not active with my ID to iCloud. A single pop up notification "could not use this apple ID active thi iPhone in the parameter list iCloud, we saw again.» Then, I removed it from the list, but I still can not active there.

    Hi Phuc Bo,

    Looks like you were using your iPhone very well, but after a reset you can activate it no longer.

    Please scroll through this article for help.

    If you can not activate your iPhone - Apple Support

    Best regards.

  • Satellite A660-13D - I can't go 65 Mbps with the wireless connection.

    + Sorry for my English is not my mother tongue. +

    Hello

    I expose my problem:

    I can't go to 65 Mbps with the wireless connection. I can't move this connection speed.

    Configuration of the laptop:

    * Windows 7 Ultimate 64-bit (with all updates installed).
    * All the updated drivers correctly.
    * With the latest version of the BIOS.

    Router:

    * Tp-link TL-WR1043ND, installed at 3 metres above the laptop (without obstacles).

    The router configuration:
    * WPA2-PSK AES.
    * 802.11n
    * Maximum output power.
    * Channel: 11 (not automatic, that this channel is relatively free).
    * Width of channel: 40 Mhz.
    * Maximum tx frequency: 300 Mbps.

    Other information:

    The wireless card drivers are correctly then updated (ver. 5.60.48.35).
    * The router has updated the firmware.
    * I tried all the settings of the wireless card.
    * Bluetooth off (without interference).
    * {color: #ff0000} there are other computers on the network that connects 150 and 300 Mbps (with the same network configuration). {color}

    Thanks in advance,
    Greetings.

    Post edited by: Xibalba

    Have you tested using different channels?
    Have you tested speed WIFI connected to another router?

  • Problem with the wireless on the system tray icon.

    Original title: wireless

    not found wirreless icon in the taskbar

    Hi Amourhbone,

    Thanks for posting your question in the Microsoft Community forum.

    It seems that you have a problem with the icon on the system tray wireless.

    I imagine the inconvenience that you are experiencing. We are here to help and guide you in the right direction.
    Provide us with a few details in order to better understand the issue.

    1. which version of the operating system are you using?

    2. deal with any problem with the wireless network using Internet?

    3. do you receive any error messages?

    4. did you of recent changes on the computer before this problem?

    I suggest you try the procedure described in the article and see if it helps.

    System icons do not appear in the notification area in Windows Vista or Windows 7, you must restart the computer
    http://support.Microsoft.com/kb/945011

    Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

    http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

    Get back to us and let us know the State of the question, I'll be happy to help you. We, at tender Microsoft to excellence.
  • Unable to share the wireless internet with other wireless devices

    Original title: I'm trying to share the wireless internet on my computer with other wireless devices, are don't see is not the other.
    Internet through my wireless computer connections are not visible to my other devices. How can I fix it so that my other devices will be found and connected.

    Hello

     
    1. don't you make changes on the computer before the show?
    2. you receive an error message on the computer?
    3. what version of operating system you are using on the computer?
    4. What wireless device you try to share?

    Method 1:
    You can try the steps in the link and check.
    Windows wireless and wired network connection problems
    http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

    Method 2:
    I suggest to turn on network discovery, and check if this helps you solve the problem. To do this, please follow the steps below:

    1. Open advanced sharing settings by clicking the Start button, then Control Panel. In the search box, type network, click Network and sharing Center, and then, in the navigation pane, click on change settings for sharing advanced.

    2. click on the chevron to expand the current network profile.

    3. click turn on network discovery and then click on save changes. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

    To learn more about this feature, please visit the below mentioned link:
    http://Windows.Microsoft.com/en-us/Windows7/what-is-network-discovery

    Method 3:
    If the problem persists then you can disable firewall on the computer and check.
    Enable or disable Windows Firewall
    http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off
    NOTE: Turn off Windows Firewall might make your computer (and your network, if you have one) more vulnerable to damage caused by worms or hackers.
    You can see the following link to disable the Antivirus installed on your computer software.

    For more information about how to resolve common network problems, please see the links below:

    http://Windows.Microsoft.com/en-us/Windows7/setting-up-a-wireless-network
    In Windows network connection issues
    http://support.Microsoft.com/kb/313242

  • Hi there I have an acer aspire one and I have a problem with my wireless connection.

    Hi there I have an acer aspire one and I have problems with my wireless connection.it is connected, but I can't use internet.any thoughts? Thank you

    A look at the "front" face, under the lip of the keyboard, similar to where a lock would be on a laptop. There is here a cursor that is not a lock, but it is a switch that activates / deactivates him wireless on and outside. Slide it on until it turns on the light above it (with the logo of the antenna), indicating wireless is turned on and drag it again to turn it off.

  • Receive a message regarding activate to Windows XP: "this copy of Windows must be activated with Microsoft before you can continue to use it."

    Why do I need to reactivate Windows XP?

    Had the genuine Windows XP on my computer for years, which was activated when I bought it. Recently have messages saying: "this copy of Windows must be activated with Microsoft before you can continue to use it."  Tried to turn it back on, but just get a message saying that it is "unable to establish a connection with the activation server" and I can't go any further. Any ideas what is happening?

    Hello

    Have you done a recent software or changes to the material on the computer?

    I suggest you to go through the steps mentioned in the link and the Coachman.

    Error: could not establish a connection with the activation server. Please check your network...

    http://support.Microsoft.com/kb/306153

    See also:

    How to activate Windows XP

    http://support.Microsoft.com/kb/307890

Maybe you are looking for