Construction of a Module separated from ATG

Similar Questions

• How can I design square wave which has a positive and negative values equal to the other and separated from each other by controlled time or distance

  How can I design square wave which has a positive and negative values equal to the other and separated from each other by controlled time or distance, as indicated in the figure below. and enter this signal in a data acquisition.

  

  At the time wherever you go for the beautiful diadram, you could have done the vi

  Your DAQ would like a waveform (table of values and dt ak 1/sampling rate)

  If you set the sampling rate you know the length of the array, create a matrix of zeros and set the values of the two amplitudes...

  Because I don't want to connect other duties here are some photos

  And it does have a few drawbacks leaves to be desired in my solution, just think... rounding errors and what might happen if the tables are becoming more...

  

• Webcam with integrated microphone. Very low sound MIC, but also an ai Genius separated from the webcam microphone. How do we install the additional microphone?

  Webcam with integrated microphone.

  Webcam with integrated microphone. Very low sound MIC, but also an ai Genius separated from the webcam microphone. How do we install the additional microphone? more details on settings please

  to check your setting first:

  Right click the speaker icon in the notification area and choose: Adjust Audio properties.

  Or: Control Panel, sounds and Audio devices.

  Volume tab: click Advanced under Speaker settings and open the drop-down list for the speaker setup and choose your speakers, click on apply.

  Click the performance tab and move the sliders to the complete and best, click OK.

  According to the Volume of the device, click Advanced.

  On the page of the Volume control, click Options in the menu, click Properties.

  Mixing should be your system and not one of your pickups.

  With reading selected all the check boxes.

  Click record, peripheral mixing system, check all the boxes.

  Click play again, and then click OK.

  Volume control, "as you like it".

  Vague, put the max slider.

  All others are ok in the middle.

  Close the Volume control.

  Now we will install your micro Genius:

  Click on the Audio tab:

  Audio playback: System.

  Sound recording: click the menu drop down and choose your Genius mic, click on apply.

  Click the voice tab:

  Reading of the voice commands: System.

  Voice recording: click the menu drop down and choose your Genius mic, click on apply, click OK

  When you want to use your Web Cam microphone, you will need to go back and select again instead of your micro Genius.

• I'm going through webmail with cable cox to outlook or outlook express, but finds it difficult to get the emails to my wife separately from mine.

  Change outlook web mail
  

  I'm going through webmail with cable cox to outlook or outlook express, but finds it difficult to get the emails to my wife separately from mine.  Not sure how they get along with the different email address.  I tried setting up separate accounts and profiles in outlook 2003 and have also tried to separate identities and accounts in outlook express 6.  Any help would be appreciated. TKS Joe Novick

  I can't speak for Outlook, even if it is very similar, but if you have configured the real separate identity in OE, as in needing to switch identities with it, avoid a problem unless you use both the same e-mail address.

  If you use different addresses to your identity, go to tools | Accounts and remove its identity. Vice versa in its identity.

  I use Cox and were three addresses in the three identities without problem.

• My windows live id is separated from my xbox live gamer tag. I need my new associated credentials.

  My windows live id is separated from my xbox live gamer tag. I need my new associated credentials.

  Hello

  You can check the link and follow the steps there:.

  http://support.Xbox.com/en-us/billing-and-subscriptions/Windows-Live-ID/Xbox-Live-sign-in

  For additional assistance, please visit the link below to find communities that will provide the support you want.

  http://support.Xbox.com/en-us/contact-us

  http://answers.Microsoft.com/en-us/windowslive

  I hope this helps.

• I downloaded separately from all parties to a four-part harmony song, how can I synchronize. two or three playing together? Windows 7.Thanks.

  I downloaded separately from all parties to a four-part harmony song, how can I synchronize. two or three playing together?

  Hello

  Plenty of capable edition

  Audacity - free
  http://Audacity.sourceforge.NET/

  Audacity - Forums
  http://Forum.audacityteam.org/

  Free Audio Editor - free 2012
  http://www.free-audio-editor.com/

  Other sources of information:

  http://Forum.recordingreview.com/

  http://www.djforums.com/forums/

  http://Homerecording.com/BBS/

  http://www.pcmusicstuff.com/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Is there a command that will take a nested sequence and break in it is separated from the pieces, as they were before, he become nested?

  Is there a command that will take a nested sequence and break in it is separated from the pieces, as they were before, he become nested? I think I've seen this once iin training but I don't remember and can't find it.

  I have roughly the same open close and music track for 4 shows and I hate having to create these same elements to see all four the separately.

  Thank you

  Steve

  You must click the icon before you glue the nest in a new sequence.

• Add the folder names in the path of the image as keywords separated from image metadata

  Hi all, I tried to find a solution online and customize the amazing Paul Riggott script, but I'm not able to make it work the way I need.

  I have my customer images organized in the structure of folders and subfolders. For all images (thousands of files in the subfolders a lot) I need a script for Adobe Bridge to take all the way from the image, separated from individual files paths file and store these records in the form of keywords separated in the metadata of the image.

  For example, I have the image.jpg/Work/Job01/share/Photos and image B.jpg file in the folder/Work/Job02/PartB/Photos. After I run the script from Adobe Bridge on file/work, I want to have for the two added images keywords

  Size: Work; Job01; Share; Photos

  Notice: Work; Job02; PartB; Photos

  As 'Work' and 'Pictures' folders are usually present, it would be nice to have the opportunity to put these two exact strings in script and exclude keywords added, but it is not necessary :-)

  The bellows of script adds one keyword ~photos/Work/Job01/share/Photos, for what is necessary is to divide and make key words separated substrings. This would allow me to move pictures anywhere and still be able to filter as a group structure (as number of employment, or part name).

  Please, could someone show me how to update this script? Or is there another solution that I just haven't found yet?

  Thank you, Petr

  // ADOBE BRIDGE SCRIPT // PUT FOLDER NAMES TO IPTC KEYWORDS
  // from Paul Riggott Script, May 12, 2011 12:23 PM (in response to JSG_Alex_B)
  // https://forums.adobe.com/thread/656144
  #target bridge   
    if( BridgeTalk.appName == "bridge" ) {   
  AddFolderNameToMeta = MenuElement.create("command", "Add folder names as keywords", "at the end of Tools"); 
  } 
  AddFolderNameToMeta.onSelect = function () { 
    addFolderName(); 
    } 
  function addFolderName(){ 
  var folders =[]; 
  var Pics=0; 
  folders = FindAllFolders(Folder(app.document.presentationPath), folders); 
  folders.unshift(Folder(app.document.presentationPath)); 
  for(var a in folders){ 
    var PictureFiles = folders[a].getFiles(/\.(jpg|jpe|jpeg|gif|eps|dng|bmp|tif|tiff|psd|rle|dib|cin|dpx|sct|pbm|flm|psb|exr|pcx|pdp|nef|dcr|dc2|erf|raf|orf|tga|mrw|mos|srf|pic|pct|pxr|pdd|pef|png|x3f|raw)$/i); 
  for(var p in PictureFiles){ 
      addKeyword(PictureFiles[p]) 
      Pics++; 
      } 
  } 
  alert("Number of Folders Processed = "+folders.length+ " Documents Processed = "+Pics); 
  function addKeyword(fileName){ 
  if (ExternalObject.AdobeXMPScript == undefined)  ExternalObject.AdobeXMPScript = new ExternalObject("lib:AdobeXMPScript"); 
  var thumb = new Thumbnail(fileName); 
  // I need somehow to make substrings from path to separate individual folder subfolder names and add these as separate keywords
  var folderName = decodeURI(fileName.path).replace(new RegExp(/\\/g),';'); 
    if(thumb.hasMetadata){ 
        var selectedFile = thumb.spec;   
        try{ 
        var myXmpFile = new XMPFile( selectedFile.fsName, XMPConst.UNKNOWN, XMPConst.OPEN_FOR_UPDATE); 
    var myXmp = myXmpFile.getXMP(); 
          var keys = getArrayItems(XMPConst.NS_DC,'subject'); 
          keys.unshift(folderName); 
          keys= ReturnUniqueSortedList(keys); 
          myXmp.deleteProperty(XMPConst.NS_DC,'subject'); 
          for(var z in keys){ 
          myXmp.appendArrayItem(XMPConst.NS_DC, "subject", keys[z], 0,XMPConst.PROP_IS_ARRAY); 
          } 
          }catch(e){} 
  if (myXmpFile.canPutXMP(myXmp)) { 
          myXmpFile.putXMP(myXmp); 
          myXmpFile.closeFile(XMPConst.CLOSE_UPDATE_SAFELY); 
          } 
  } 
  function getArrayItems(ns, prop){ 
  var arrItem=[]; 
  var items = myXmp.countArrayItems(ns, prop); 
    for(var i = 1;i <= items;i++){ 
      arrItem.push(myXmp.getArrayItem(ns, prop, i)); 
                  } 
  return arrItem; 
  } 
  }; 
  function FindAllFolders( srcFolderStr, destArray) { 
  var fileFolderArray = Folder( srcFolderStr ).getFiles(); 
  for ( var i = 0; i < fileFolderArray.length; i++ ) { 
    var fileFoldObj = fileFolderArray[i]; 
    if ( fileFoldObj instanceof File ) {   
    } else { 
          destArray.push( Folder(fileFoldObj) ); 
    FindAllFolders( fileFoldObj.toString(), destArray ); 
    } 
  } 
  return destArray; 
  } 
  function ReturnUniqueSortedList(ArrayName){ 
  var unduped = new Object; 
  for (var i = 0; i < ArrayName.length; i++) {   
  unduped[ArrayName[i]] = ArrayName[i]; 
  } 
  var uniques = new Array;for (var k in unduped) { 
    uniques.push(unduped[k]); 
    } 
  uniques.sort(); 
  return uniques; 
  } 
  }; 
  
  

  The only other option that I know uses ExifTool:

  Help by adding information of path as keywords

• Hi, I need to send 3 of my 6 tickets off Adobe to a friend, how to record 3 separately from the 6?

  Hi, I need to send 3 of my 6 tickets off Adobe to a friend, how to record 3 separately from the 6?

  You can not with the free software from Adobe. Acrobat Pro or Acrobat Standard can be purchased for this, but it probably costs a lot more than tickets. If your friend is a good friend, ask them to print it and do not use special tickets. If they are a good friend, print and send to print.

• 1 VM, 2 virtual NETWORK adapters-&gt; Can each vNIC be in groups separated from Port?

  Really just unable to find what anyone with search terms, I've been using the fairly simple question. I have an environment with about 5 different and some vSwitches with various groups of ports, etc.. I'm talking specifically about 1 particular vSwitch in this case. There are 3 virtual machines that are connected to our network of the machine (manufacturing environment where the machines are all networks). This vSwitch using a physical NETWORK card to connect to the largest network physical switch where all computers are connected to all throughout the plant.

  I have a diagnostic machine setup that I installed on Wireshark. Currently, there is only 1 vNIC assigned to this server that is connected to above mentioned vSwitch. I use that as the management port so that I can connect to it. However, I don't want this port to receive the packages.

  So the question:

  I want to install another vNIC in this machine that is in its own separate port (separated from the aforementioned management port) group. I also want to assign a physical NIC dedicated to this card so the only machine using this physical NETWORK adapter is this machine to sniff. So, can I have 1 virtual machine that uses 2 network cards to connect to 2 groups of ports on the same vSwitch so that I can turn on only on promiscuous mode the Group of ports for NETWORK capture card so that the rest of my machine network servers very crucial drown in packages on the other group of port? Thank you!

  Mike

  Yes, definitely, you can have a virtual machine with two vNIC in groups of different ports and any vSwitch groups these port resides.

• How to make that guest OS is separated from the host

  Have Win7 (16 GB of ram, 1 TB HD space) is a part of a Small Business Server 2011 domain.  I have a problem with the SBServer and want to look at a new facility to see certain folders permissions have by default. (user redirection folders does not, even if I set permissions per technet article).  Network is 192.168.1.x, can I install a Small business Server 2011 guest (that would be a trial of MS download) and make sure that it is completely separated from the win7 Host and, of course, the field. Then create one or two comments more OS on this same machine win7 and have these comments of BONES join Small Business Server customers?  If so, how do I set that up?

  Thank you, Steve

  Yes it's doable... read the documentation!   Setting up an isolated test with virtual network configuration is no different, so do it with a physical network.  In particular read Chapter 7 "Configuring network connections" in getting started with VMware Player (PDF).

• Have been suspicious Keeper download modules come from?

  Today, I noticed an ad on a page, I visited. This announcement has been labeled 'Download Guardian' and showed a few pictures with products and prices in dollars. I wasn't expecting these ads on the site in question and so I looked more closely at it.
  In addition, I find a lot of items contains classes starting with SF_ as SF_IIAD_EXPL and URLs starting with http://www.superfish.com. In addition, some javascript files are loaded from http://rvzr-a.akamaihd.net.
  Then I looked at my modules and found 4 suspects:
  Guardian dDoowload 1.6
  Download KeeEper 1.6
  Download keeper 1.6
  DownnlOadd guardian 1.6
  How could they have come here? I'm certainly not a not add them intentionally. Are they came with some installation software? Is it possible I can avoid these types of modules to install?

  I should mention that in the programs and features of Windows 8 Control Panel that you can sort by date as a tool to study the programs installed together or very close in time.

• cDAQ module signals from 5 to 2000 Hz genarete

  Hello

  I am looking for an output module of the cDAQ which can generate signals of frequency from 0 to 2000 Hz

  Thank you

  Prashant

  Hello, UPRR.

  As long as the module has a refresh rate higher than 20kS/sec, then you should be fine. so NI 9263, NI 9264, NI 9265 and NI 9269 should be good for you.

  Kind regards

• Separated from the chain and chart

  Hello

  I work in LabVIEW 13. I get a string from a robot in this format: "[X, Y, Z]," where X, Y, Z are numbers that vary in character count. I am wanting to split these 3 double channels separated with just the numeric values (i.e. remove the square brackets and commas) and then graphic error between the ordered position data vs the returned position data. I looked at the search and replace and split strings of vi, but I'm kind of confused on how to use them properly.

  Can someone point me in the right direction for the first split the strings and graphics then the numbers?

  Thank you

  SM

  Graphic, I think you can figure out to play around with the numbers. To help you get started, here's how would you use string analysis for 3 numbers:

  

  If you are just graphical error between actual and theoretical, it's easy. Get the XYZ difference between two points, and then perform a calculation of Pythagorean theorem on the resulting vector.

• problem with pipe separated from the input parameters to call

  Hi all
  
  I have a requirment as...
  
  I have a Sp 10 which have 3 SETTINGS and 3 settings as shown below...
  
  
  PROCEDURE sample_sp1 (p_start_dt IN VARCHAR2,
  p_end_dt IN VARCHAR2,
  p_shift IN varchar2,
  p_out1 OUT t_bpd_nm, - array type
  p_out2 OUT t_target, - array type
  p_out3 to t_drr); -type of array
  
  
  
  PROCEDURE sample_sp2 (p_start_dt IN VARCHAR2,
  p_end_dt IN VARCHAR2,
  p_shift IN varchar2,
  p_out1 OUT t_bpd_nm, - array type
  p_out2 OUT t_target, - array type
  p_out3 to t_drr); -type of array
  
  
  
  .........
  
  
  ..........
  
  
  PROCEDURE sample_sp10 (p_start_dt IN VARCHAR2,
  p_end_dt IN VARCHAR2,
  p_shift IN varchar2,
  p_out1 OUT t_bpd_nm, - array type
  p_out2 OUT t_target, - array type
  p_out3 to t_drr); -type of array
  
  
  
  
  
  
  Now, I have to create a new SP. This SP, I have to call one of the top 10 SP and have to come back as a REF CURSOR.
  
  
  the entries to the new MS are 3 as... (shown below).
  
  
  create or replace new_sp (p_report_name IN varchar2,
  p_report_inputs IN varchar2,
  p_report_as_ref to ref_cur_type) is
  
  
  ..............
  
  where p_report_name is a name of sp
  p_report_inputs is the input to SP parameters with "|" separated pipes (ex: ' 23/04/2010 | 20/05/2010 | 2 ')
  p_report_as_ref is setting to return as an OUT refcursor.
  
  
  I'm unable to manage the setting shild (with tickets). How to separate input parameters and how can I call existing SP
  with these settings?
  
  
  friends... can someone help me please...
  
  
  Thanks in advance...

  What of it?

  with t as
  (select replace('500 Oracle Parkway| Redwood Shores| CA','|',',') str from dual)
  SELECT
    replace(REGEXP_SUBSTR(str,'[^,]+,'),',') first,
    replace(REGEXP_SUBSTR(str,',[^,]+',1,1),',') second,
    replace(REGEXP_SUBSTR(str,',[^,]+',1,2),',') third
    FROM t;
  
  ----
  500 Oracle Parkway      Redwood Shores      CA