Contact form shows as Page not found

Similar Questions

• The page you are looking for is not available. You may need to contact your administrator with this error: 404 Page not found.

  I am at a loss.  I've set up a root certification authority to sign all servers in my workspace of Horizon, SAML is in the Green and after a lot of reading when troubleshooting also synchronized on all my ESXi hosts and guests.

  Basically, what I did is the following:

  Set up the connection to the Server VMware View Horizon 5.2 - created different pools and can connect via the customer different platform. (a few times to eliminate any possible configuration errors along the way)

  Configuration of VMware View Horizon Workspace 1.0 (a few times now) with self-signed and CA signed certs.  My workspace appears fine, the synchronization of files, apps work, and view pools appear.  When I try to launch your desktop from inside the Horizon workspace I get this error:

  The page you are looking for is not available. You may need to contact your administrator with this error: 404 Page not found.

  Now I think that I followed it down to something to do with SAML connection - which, to my understanding, archery chips between workspace and view.  On the login server, I see it in the Windows event log:

  BROKER_USER_AUTHFAILED_SAML_ACCESS_REQUIRED

  SAML access required but not tempted by customer

  Attributes:

  Source = com. VMware.VDI.Broker.filters.SamlAuthFilter

  Time = MON may 20 16:06:41 MDT 2013

  Gravity = AUDIT_FAIL

  Node = ViewConnection.access360.ca

  Module = broker

  Recognized = true

  Something is not crossing to allow me to access my office view since the workspace of Horizon.  If I remove the requirement of SAML on the login server see, when I try to connect to a desktop computer from the view connection server I get a promotion for and can I get my IDs & field and have full access with reviews, as well as blast HTML - just cannot get there with Horizon Workspace.  There must be something that I am missing with SAML...

  As I said, I'm at a loss here on what does not work between the Horizon workspace and the connection of SAML for display to connect to the server.  There is no server security, server transfer, and firewalls is all off, so I don't think it's a network problem.  Simple as possible.  The Windows Journal event displays the login displays server error is: access required but not attempted by client SAML.  I have all my servers synchronized after a few seconds - so I don't think that documented the TIME Horizon workspace synchronization time sensitivity is responsible here.  I am Pack overnight, but will do exactly the same thing with a client of tomorrow - hopefully without the same result!

  Any ideas?

  A

  So I re-deployed the VAPP (again!) very attentive as I went.  As usual, the initial database installation failed because I entered my domain FULL of the gateway name, so it does not match.  After useful messages already there for this (Workspace install fails with error creating the user admin) I used the wizardssl.hzn of connfigurator - going to recreate a rootca to the environment based on my FULL domain instead of the bridge - going and then let it grow all for the other vApps.  I then connected to each and pulled down my private rootca and ran c_rehash, etc. (another useful message!- adding MS signed Certs to Horizon Workspace & laquo;) Carlos & #039; Corner) I actually use my background to UNIX and openssl to be my own private CA and sign all of my certificates.  I created the SAN cert and added to the SSL configuration on the Configurator - going and connector - going.  Oddly enough, both of these server do not appear to be accepting SAN cert that includes their ENTIRE domain, but that's for another day... My Horizon Workspace FQDN does show as being approved by installed RootCA private (which does not have other DNS names for the service - going, the Configurator - goes, the data - will and the connector - will, but as I have already said--a battle for another day) so it's a good thing.  I joined my workspace to my domain name - well!  Activated would be pools seen in the Configurator - goes - sync - good.  CRT for the my display login server has accepted and implemented the SAML trust.  Still good.  Sync in my opinion users group who already had a couple of linked clone pools allowed to do.  Good.  Connected to the FQDN of my workspace and clicked on computers - seen my 3 pools.  Clicked on one and after a few seconds, launched in a new window of the explosion.  Success!  I disconnected and connected on a different machine, and something that I saw before, but doesn't have a lot of attention to was the connector - will put 'use windows authentication', I couldn't understand why every time I sailed on my Horizon workspace a no vmware window opens asking access my FQDN:443 with a user and pass.  It is this setting - duh.  I'm not sure yet that gives me, so it's off for now.

  Thanks for all the input: it's good to know that there are others with some of the same questions.  It's still v1.0, it is related to some of these pitfalls.  It is capricious with derived from same time less than 10 seconds seems to have a negative impact.  Had to ensure my ESXi servers were strong (never worried a lot in the past with MS AD being quite tolerant with small derivatives) I tired my vApps affecting a NTP, but they seemed like being left to the default of synchronization to the ESXi host.  See how than pans.  CERT is somewhat capricious depending on your deployment.  Of course the connector - will and the Configurator - must be signed by a CA that they are internal, but always be nice to then have signed internal...

  Now, I'm on ThinApps for desktops as well as the web interface integration.

  I bumped my head against the wall with my first configuration of Citrix XA and XD (before having VDI in a box!) and it was the best way to learn.

  I don't know that I grave along that I finished my PoC, but I'm very happy with today's results.  I still plan on the comparison of my logs successful with the logs I have pulled my former deployment TIME and see what it was that it was broken.  I think it was that wanted me a PTR record to my domain FULL DNS MS. name  I think I just had the direct search for the original bridge - will and FULL, but only a setback for the gateway domain - name.  Would explain why I was never able to connect to the gateway to access your desktop.  Oops.

  A

• MUSE: Adobe hosting, 123-reg URL and e-mail box, Muse/widget form will not send email.  Diagnosis step 1: form_check.php.  But this returns a "Page not found".

  I have a simple 1 page site live a reg-123 registered URL www.menitlimited.com, but using Adobe accommodation according to the directives of the packaging of Muse.  In short, the form doesn't send emails (should be sent to [email protected] - that is, I have entered the settings of the widget). Reading the forums, this test 'www.menitlimited.com/scripts/form_check.php' seems to be the first thing to do, but it returns "Page not found", rather than the ticks/crosses. What I am doing wrong or missing here please?

  Troubleshooting tips, you are referring are specific to when you are hosting on servers not Adobe. It is quite unusual to have a problem with a form when you host on Business Catalyst.

  The first thing to check are the filters of spam in your e-mail client. The most common situation is that the e-mail was sent and received, but classified as spam by your e-mail client.

  If this isn't the situation, I recommend you to contact our support Business Catalyst to Adobe Business Catalyst support>.

• Cannot connect to the 'HP connected' - page not found error?

  Hi guys,.

  I recently bought a HP5520 and trying to connect via connected HP.  I have never used wireless before printing so it's all a bit new to me, but I'm SURE it takes this hard.

  I finally managed to create an account in connected HP (which took several attempts on the 'create new account' link doesn't seem to work in Chrome) but now I can not connect the HP site connected to any browser.

  I go to the ePrint centre and connect you, that works very well:

  https://h30495.www3.HP.com/c/46359/us/en/

  And I am directed to open a session connected HP site where it says that I have will be automatically saved in:

  https://www.hpconnected.com/au/en/

  However, when I click on the link above, I show a blank page showing 'Page not found '.

  I tried this in Explorer, Chrome and Firefox and get the same results.

  I use a PC with Windows 7.

  It has been a few hours now and I can still print even a simple page of text... Can someone please help me here?

  I had the same problem in the Canada. So here's what I did:

  1. I used Mozilla Firefox and remove all languages (Tools-> Options menu / tab content, click on choose in the section on languages and remove all languages).

  2 go to https://www.hpconnected.com/us/en/. At this point you should not redirected.

  3 click Sign In at the top right of the page. Enter your email and password.

  4 you now receive a message 'Page not found'. On my computer, I was redirected to https://www.hpconnected.com/ca/en/. Now, here's the trick: click on the 'return' button (the arrow in the pointer address pointing to the left) and brings you to the home page where you will see that you are truly connected and it can proceed normally with the site!

  Fred

• Tried to use the Redemption Code - go to the download and Page not found

  Just bought Adobe Photoshop elements 14 Best Buy.  Came home and implement Adobe ID.  Went to redeem with the code and he agreed, but when I try to download it says: Page not found.  I read the forum and tried another link - same result.  HELP PLEASE!

  Redemption Code http://helpx.adobe.com/x-productkb/global/redemption-code-help.html

  - and https://forums.adobe.com/thread/1572504

  or

  This is an open forum, not Adobe support... below to connect with Adobe personnel to help

  While the forums are open 24/7 you can't contact Adobe support at any time

  Chat support: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

  Don't forget to stay signed with your Adobe ID before accessing the link below

  Creative cloud support (all creative cloud customer service problems)

  http://helpx.Adobe.com/x-productkb/global/service-CCM.html

• Pagename page not found error

  Hello world

  I'm building a demo application, I created a site, I created a template, I created a CSElement to make an element (< a >) link but when I click on the link, the server shows me an error, page not found.

  This is the code of the CSElement I called from the layout.

  <render:gettemplateurl tname="LayoutPagina" c='<%= ics.GetVar("c") %>' cid='<%= ics.GetVar("cid") %>' outstr="urlVar" ttype="CSElement"/>
  
  <a href="<string:stream variable="urlVar" />"><ics:getvar name="linkText" /></a>
  

  And the page layout, I called the CSElement as...

  <asset:load name="nav" type="Page" field="name" value="Principal" />
  
    <asset:getsitenode name="nav" output="nodeID" />
  
    <siteplan:load name="mainNav" nodeid='<%= ics.GetVar("nodeID") %>' />
  
    <siteplan:children name="mainNav" list="childPages" order="nrank" />
  
    <ics:ifnotempty list="childPages">
    <ics:then>
    <ics:listloop listname="childPages">
    <ics:listget listname="childPages" fieldname="oid" output="pageID" />
    <ics:listget listname="childPages" fieldname="otype" output="pageType" />
  
    <assetset:setasset name="pageAsset" type='<%= ics.GetVar("pageType") %>' id='<%= ics.GetVar("pageID") %>' />
    <assetset:getattributevalues name="pageAsset" attribute="TituloPagina" typename="PageAttribute" listvarname="titleList" />
    <ics:listget listname="titleList" fieldname="value" output="title" />
  
    <li>
    <render:callelement elementname="/Demo/getLink">
    <render:argument name="c" value='<%= ics.GetVar("pageType") %>' />
    <render:argument name="cid" value='<%=  ics.GetVar("pageID") %>' />
    <render:argument name="linkText" value='<%= ics.GetVar("title") %>' />
    </render:callelement>
    </li>
    </ics:listloop>
    </ics:then>
    </ics:ifnotempty>
    </ul>
  

  I created 2 pages and links normally appear on the page, but when I clicked on the link of the server gives me an error.

  The following screenshot shows the links.

  https://lh5.googleusercontent.com/-p-7HgNVAkF8/UzrmzrG4xKI/AAAAAAAABkc/JIsoWA-shnI/S512/links.PNG

  But the URL on the links are similar like this

  " < a href ="http://localhost: 8080/cs/Satellite? c = Page & cid = 1394944983357 & pagename =null % 2FPage % 2FLayoutPagina& rendermode = preview" " >

  
  

  If anyone can help me, I would be appreciated.

  
  

  Best regards!
  

  Hi rvillamarin,

  In your url, there is no site in pagename value name. I think that if you pass the name of the site in the render tag: gettemplateurl, the url should be generated correctly. So in your url looks like pagename = instead of pagename =null % 2FPage % 2FLayoutPagina % 2FPage % 2FLayoutPagina

  concerning

• I bought adobe 14 items but when I click on the download button once I typed in my redemption code it says page not found

  I bought adobe 14 items but when I click on the download button once I typed in my redemption code it says page not found

  I would advise you to Contact Customer Services because they may be able to help with cash.

• ERR-1016 request "104" "101" Page not found (requested language = "de")

  Hello everyone, I am faced with a new problem, I have an app that works well in our development environment, when I import it into a machine to our German customer (in both environments whe have apex 4.1.1.00.23 updated to apex 3.2 and 11 GR 2 oracle database 10 g 2 update), after a period , she released this error: ERR-1016 request "104" "101" Page not found (requested language = 'from') contact your administrator for the application.
  Language main application defined in Germany (de), Application language derived from the value "Application primary language ', I tried to add the German language in the browser (as a first language), but error persists, can you help me please.

  One of the answers I've found is to go to: application XXX-> shared components-> translate application-> application primary language map application translated, provided for in this article, I found that the application of the translated language id does not exist, so I deleted the translation mapping (the application is not multi-language), my work requires once again

• Hidden entry point causes the Page not found error

  Hello.
  
  I use Apex 4.1.0 on Oracle 10.2.0.5 and mod_plsql (Oracle application server).
  
  I created an application with two tabs.
  
  On one of the tabs in a block of Annonymous PL/SQL, I have the following code:
  

  begin
    htp.p('
  <!DOCTYPE html>
  <html>
  <head>
  <title>AMO PROPOSAL CHECKLIST</title>
  </head>
  <body>
  <h1>AMO PROPOSAL CHECKLIST</h1>
  <form action="" method="post">
  <input type="hidden" name="FS-1" value="1" />
  text2<label for="C12" class="hideMeButHearMe">text2</label><input type="text" name="f02" size="20" maxlength="12" value="" name="TEXT-Q12" id="C12" />
  My Question
  </form>
  </body>
  </html>
  ');
  end;

  When I run this page, the HTML code is rendered correctly.
  
  However, if I then click the other tab, I get the error: Page not found.
  
  I've narrowed the problem to the inscription of this point of entry hidden: < input type = "hidden" name = "FS-1" value = "1" / >
  
  If I simply delete this hidden, switch to another tab throws any error.
  
  I ran this page using Firefox with Firebug. But does not help me understand why this hidden item throws the error.
  
  Anyone know why this is happening?

  EEG wrote:
  Hi, fac586.

  Well, today the good folks at Oracle/Apex unlocked my account apex.oracle.com and so, was able to connect.

  I created a new application:

  Workspace: EEG
  Username:   [email protected]
  Password:   galaxy (Note: all lowercase)
  
  App Id: 28044 (Name = Debug Page Not Found Error)
  

  I created a new user of fac586 , so that you can follow what I've done through the activity if necessary log...

  The application uses the same theme (Sapphire, #17). Page 1 contains a region PLSQL Annonymous Block in which I simply preprogrammed the exact same HTML code that throws the error "Page not found" that started this post. The other page is just a page of report.

  When the application runs, page 1 immediately appears with the HTML code. However, by clicking on the 'Report' tab (for the 2nd page) get the Page not found error.

  If you have time, I'd appreciate it if you could kindly look at what I've done. It would help to understand if you can translate essentially advice you have already posted to what is shown in this sample application.

  After seeing what you do more in detail I am now actually suggesting a completely different approach ;-)...

  Given the potential duration visualized forms and the obvious importance of the applied CSS, preview style has really come in the form of a separate document. (As noted above, you can not have more than one element html, head and body in the page and that and the CSS that you attempt to register is completely destroying the presentation of the APEX on page 1.)

  Therefore, I want to say now is made the preview in a separate document in an iframe within an HTML region, as illustrated on page 3:

  Document source is a process on demand in your application from which you can call a procedure that returns the HTML survey form. The iframe is automatically sized to display the complete form.

  You still need to take measures for the visualized form either by ferry to sand/locked so that it can be made: it is the case in the examples the measure where there is no form action and no submit button, but it is unclear if this is indeed the case in your application?

• Newbie - page not found after all started

  Hello
  
  I have server and server admin handled both upward and run as seen here
  Server admin:
  < 10 March 2010 10:37:03 CEST > < opinion > < Server > < BEA-002613 > < Channel "Default" is now listening on 10.10.74.20:7003 for iiop, t3, ldap, snmp, http protocols. >
  Managed server:
  < 10 March 2010 10:38:21 CEST > < opinion > < Server > < BEA-002613 > < Channel "Default" is now listening on 10.10.74.20:7005 for iiop, t3, ldap, snmp, http protocols. >
  
  but will http://10.10.74.20:7003 or http://10.10.74.20:7005 gives me the 404 page not found.
  The two log file is not any error massage.
  
  Can someone help me?
  
  Thank you
  Anatoliy

  Make sure that the server is completely started and it should show lines like this:

  Also to access console url is: http://adminserverhost:adminserverport / console. Enter the user name and password that you gave when creating the domain. In your case: http://10.10.74.20:7003 / console

  HTH
  Ravi Jegga

• HTTP 404 error: Page not found

  I got a * "HTTP Error 404: Page not found" * when I plug by branch of Page identified by post using the F103_NEXT_PAGE application_item the element. I looked at the apache error log and found the following error message:
  
  [Mar 26 May 16:47:13 2009] [error] mod_plsql: \nwwv_flow.accept /pls/apexcfp8/wwv_flow.accept HTTP-404: SIGNATURE (parameter names) in FORM STEPS in PROCEDURE MISMATCH\nVARIABLES: CURRENTELEM\nNON-by DEFAULT the VARIABLES in a PROCEDURE NOT UNDER FORM: \n
  
  I have always received the same * "HTTP Error 404: Page not found" * when I plug through to go to the Page using the application_item * & F103_NEXT_PAGE.* as the page.
  
  Can someone help me please. I'm under a tight deadline, and I can't test the application until it is resolved.
  
  Thank you in advance.
  
  Robert

  The model of list named list progress PA-Assistant has a hidden element defined in it? Where did this come from?

  < tr>< td class="t15Current" >#TEXT#< input type="Hidden" id="CurrentEle" name="CurrentElem"/ >< /td >< /tr >
  < tr >< td class="t15CurrentImage" >< img src="#IMAGE_PREFIX#arrow_down.gif" width="7" height="6" alt="" / >< /td >< /tr >
  

  Scott

• 'Download files' procedure does not work in app/poster in double-page not found

  Hello
  
  I created an application using the procedure 'Download files' described in the chapter 'How to download and upload files in an Application' Apex 'Advanced tutorials.' It works fine on a single server, however, when I exported the applications and the data of the copy of the work and any in the APEX running from my laptop, I could download files and generate a report with a link to click and download the files again but when I clicked on these links, I would get a "Page not found" error Looks like it may not go to the procedure and instead goes to a page as follows: "http://127.0.0.1:8080/apex/DBAPORTAL.download_image?p_id=1868612316946460." On the copy on the other server, when you click on the download link, you will get a dialog box asking if you want to open or save the file.
  
  Someone could tell me why the procedure is not called and goes to a non-existent url while the origonal application works fine on the other server?
  
  I have granted permissions for the APEX_PUBLIC_USER enforcement procedure. I wonder if there are other authorities I should be granted. Should I grant permissions PUBLIC or ANONOMUSE to use the procedure "download_image"?
  
  I forgot to mention that I use on my laptop 11.1 database, and the server that the database is 10g.
  
  We hope to get an answer to this question. I already asked a few people and they are puzzled.
  
  Thank you in advance.
  
  Linda

  Linda,

  Sorry for the missing = sign, you are right.

  Show me the code you have in this function. It should be:

  if upper(procedure_name) in (
            'DBAPORTAL.DOWNLOAD_IMAGE') then
          return TRUE;
  ...
  

  Scott

• To version download link Android of the Aurora is offline, page not found

  I am trying to download firefox-aurora to my android, but the file is not available. I get page not found... I couldn't find a place where I could report it correctly, so I post here...

  Thank you, this link should work for now: https://ftp.mozilla.org/pub/mozilla.org/mobile/nightly/latest-mozilla-aurora-android/en-US/fennec-30.0a2.en-US.android-arm.apk

• How so avoid during a search, opening a new page or using the mouse-it flips page not found and "cltrda".

  How can I prevent the "page not found and cltrda information opening instead of my search?

  Try to use the extension SearchReset reset preferences to default values.

  • https://addons.Mozilla.org/firefox/addon/SearchReset/

  Note that the SearchReset extension runs only once and then uninstalls automatically, so it will not appear on the page "> Firefox Add-ons" (topic: addons).

  If you don't keep changes after a reboot then see:

  • http://KB.mozillazine.org/Preferences_not_saved
  • http://KB.mozillazine.org/about:config

• "404 - page not found" error message after downloading and installing Firefox 15

  "404 Page not found" error message after you download the latest version of Firefox.

  It is sometimes the result of a software firewall that protects you against modified applications. Or it could be something else. Can you look at this article and see if it helps: Firefox can not load websites, but can other browsers.