Contact form "the server encountered an error!

Similar Questions

• Contact form "the server encountered an error!", on mobile

  Hello

  Just added to my existing Web site, supports the section of (mobile) phone.

  Everything is OK looking, but when you submit the contact form join us on my mobile phone, I get the "the server encountered an error!

  This message appears only on the cell phone version. The desktop version works fine.

  form_check.php shows 3 brands OK

  Web site: www.creativepages.biz

  Please advice,

  Arie

  I tested the 'sample request' on the phone version and it worked on my end, correct me if I'm using an incorrect form I see someone else get a submission form on the same page too.

  Thank you

  Sanjit

• Contact form - the server has encountered an error

  The Contact form widget, I've included in my original works perfectly until recently when this error notification appears when you press the submit button. I added a second contact form for a new page on the site, a subpage to the initial Contact page. The same error message appears when an attempt is made to submit. Help, please! I don't understand why the change suddenly. My host, yahoo, has always supported the required PHP.  As far as I know he has not changed.

  I suggest you to contact your hosting company as it looks like a problem with the configuration of PHP.

  Thank you

  Sanjit

• Form error message 'the server encountered an error' Muse

  I downloaded a Web site using Muse, and I have problems with the form widget. I ran a diagnostic and all three are marked green, but when other people try to use it on a pc or phone, they get the error message "the server has encountered an error.

  What of weird is that some people have problems at all, and some are? I've updated the email address for the form to send to, to match the address of the site and its still does not.

  Please could you help, because I need it operational as soon as possible, as its RSVP form.

  Thank you

  Please note that the browser and version of the browser, device OS version device for someone who has received the error, so to see if there are any model.

  In general, this type of error is dependent only on the configuration of the server and is therefore almost always consistent regardless of the browser/device used to view the site.

  Are the visitors of your site, all from the same company? By default, forms of the Muse limit the number of submissions can be submitted to a single IP address in a short period of time in order to limit spam.

• I can't reactivate my e-reader with my existing Adobe ID and password which are both correct. I alwayss get the message "the server activation Code error: E_AUTH_NOT_READY" what kind of problem is this and what is more important, how can I resolve it quic

  I can't reactivate my e-reader with my existing Adobe ID and password which are both correct. I alwayss get the message "the server activation Code error: E_AUTH_NOT_READY" what kind of problem is this and what is more important, how can I resolve it quickly. I'm on vacation and you want to read. Thanks for the quick response.

  Yes, actually I talk about digital editions. Do you know how to solve the problem, as stated in my first mail of Digital Editions? Thank you for your kind cooperation.

• How can I fix the error of form "the server has encountered an error"?

  I have a Muse contact form widget with a couple of custom fields and check boxes added. When I try to send the form, I get a message "the server has encountered an error.

  I tried to run the form_check.php, and all my ticks are green. I tried to add an email address to send to with the same URL that the site and I have tried including my personal e-mail in the first place is not an e-mail address "bigcompany.com".

  I don't understand why it won't work, because I am currently using another form in a mini site under the same domain with the same email address and it works perfectly! Help please!

  Thanks in advance for your suggestions.

  Simon

  Please try to re - insert training and then check, otherwise you can try to publish the site in British Colombia as a place to test which would help isolate the problem.

  Thank you

  Sanjit

• Media Player cannot connect to the server - Original COOD2EE7 error code

  Tried media player - tools - options-network. Cannot configure the Protocol / the proxy settings. Streaming proxy settings area is empty.

  Hello Adelek,

  Thank you for posting.  It seems that you may have a firewall problem.  I that you would suggest to check your firewall settings to see if it's to allow access of media player.  I've also included some basic information about this error.

  Please let me know if this helps you.

  You got the C00D1198 error message when you use Windows Media Player. The following information can help you resolve the problem.

  Unable to connect to the server

  Windows Media Player cannot connect to the server that hosts the content you want to listen to. You may encounter this error message for the following reasons:

  • The name of the server that hosts the content is not valid. If you typed an address Uniform Resource Locator (URL) in the open URL dialog box, verify that the file name is spelled correctly and that the path to the file is correct, and then try again. If you clicked a link on a Web page, the link isn't valid.

  • The server is not available (for example, the server is busy or not online). Try again later.

  • For Windows Media Player proxy server settings are not configured correctly. Verify that your proxy server settings are correct.

    To check your proxy server settings

    1. Click the arrow below the now playing tab, and then click More Options.

    2. Click the network tab.

    3. Check your settings in the Streaming proxy settings area.

       Note

       • If you don't know what your proxy server settings should be, on the network tab, select a Protocol, click on configure, then select Autodetect proxy settings or use the the proxy settings of the browser (available for HTTP protocol only).

  Zack
  Engineer Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• The server encounters an error, don't know what to do

  The server encounters an errorand I don't know how I can solve this problem. Any help would be appreciated. Here's the URL, if someone wants to click here

  Because I have just fixed by myself. Thanks btw

  I didn't know that we should use their webmail third-party hosting. I used my personal email address, and that's why I was getting an error. Well, that depends on what accommodation you use because in my last hosting I was using my personal e-mail and Muse form worked very well.

• Unable to connect to the server... error code 0 x 80070043

  Hey you all.

  We have a server on the network that contains the software and the data we use in a client/server parameter. To install the client side, we do the following from the workstation:

  START / RUN / \\10.20.0.77 which opens a window on the software on this server. Run us Setup.exe and everything is good on the client computer after installation is completed successfully.

  I have not had any problems to access to the / mapping for this server to Windows XP and Windows Vista Business 32 b, but on a Windows Vista Business 64-b system, I am no longer able to connect to the server via the net use or net shareor the map network drive feature. The following error occurs:

  "10.20.0.77" is not set up to establish a connection on port "File and printer sharing (SMB)" with this computer.

  It is possible to access this server by using a web browser, but the software install that way. The error code associated with the start was 0 x 80070043.

  I say "originally" because after researching on the net, a single thread suggested changing the NetBIOS default value " Enabled" for this network card Protocol. After you make this change, the error code as amended in 0 x 80070035, but the description remained the same as those listed above.

  Another thread said the server was to port 139 for mapping research, but Vista has been maps on port 445. Since I can't access 10.20.0.77 server to carry out changes, its installation rinetd solution and implement a file etc/rinetd.cfg to it remapped 445 to 139 is not possible, especially since our network is ENORMOUS and it could affect workstations running without any problem.

  Anyone here heard, or familiar with this type of problem for helping to find a solution?

  Thank you muchly. :)

  Cole

  A teacher affects eternity: he can never tell where its influnce judgments.

  Hello Aj. Cole,.

  I have a couple of thoughts for you, but since you're talking about server and workstation, I guess that you are in a domain environment. If so, then your problem of not being able to connect to a server would be better served in a forum that would be dealing with server and domain issues.

  However, the error message, 0 x 80070043 - the network name cannot be found

  Ensure that you have sufficient access to SMB file transfers (this requires ports NetBIOS open because SMBS use the NetBIOS protocol to transfer data).

  You can also check to see if the Vista workstation has a gigabit card. If so, look for the following local strategy.

  Enable the policy local to always wait for the network at the start of the computer and logon . To do this, follow these steps:

  1. Start the Group Policy Editor (gpedit.msc).
  2. Expand Local Computer Policy\Computer Configuration\Administrative Templates\System\logon.
  3. In the results pane, click always wait for the network when starting the computer and logon and then click Properties.
  4. On the setting tab, click active, and then click OK.
  5. Restart the workstation.

  You don't specify what your domain environment, so I don't know which forum send you as Windows 2003 SBS etc. Use the following link to find a good forum for you.

  http://social.technet.Microsoft.com/forums/en-us/categories/

  Hope this helps

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Receiving the message "the connection to the server failed. "Error number: 0x800CCC0E".

  Recover lost email

  Hello can someone tell me what this means? James > the connection to the server has failed. Account: * e-mail address is removed from the privacy *', server: 'mail.bigpond.com', Protocol: POP3, Port: 110, secure (SSL): no, Socket error: 10013, error number: 0x800CCC0E

  You use Windows Mail? It could be a number of things.
   
  • Modem or router - reset both.
  • Server problem possible they need to solve.
  • Analysis of e-mail messages. Very likely.
   
  Disable analysis in your e-mail anti-virus program. It is a redundant layer of protection that devours the CPUs, slows down sending and receiving and causes a multitude of problems such as time-outs, account setting changes and has even been responsible for the loss of messages. Your up-to-date A / V program will continue to protect you sufficiently. For more information, see:
  http://www.oehelp.com/OETips.aspx#3 
   
  Why you don't need your anti-virus to scan your email
  http://thundercloud.NET/infoave/tutorials/email-scanning/index.htm
   
  Note that for many AV programs, it may be necessary to uninstall the program and reinstall in custom Mode and uncheck e-mail scanning when the option is available.

• Connection to the server has failed: error number: 0x800CCC0E.

  It's my code error than failed to connect to the server. Subject ' Fw: today only! Free Shipping on Any Order', account: 'imap.aol.com', server: 'smtp.aol.com', Protocol: SMTP, Port: 25, secure (SSL): no, Socket error: 10060, error number: 0x800CCC0E

  original title: I can't send email

  Try changing your Port # 25 in the... 587.

  Assuming you are using Windows Mail...

  Open Windows Mail > tools > accounts > your aol account > properties > advanced > under outgoing (SMTP) mail change from 25 to 587 > OK when finished.

• My creative cloud adobe won't sync, it says that the server has an error

  Im trying to sync my library clud color palette to my desktop and laptop. But he won't let me - he continues to stop and say creative cloud server has an error, but it dosent say WHAT error. what I am doing wrong?

  Hello

  Please follow the link below:

  "Unknown Server error" | Sign in to creative cloud

  Hope this helps

  Thank you

  Varun

• Esxi5.1 with the server 2008r2 key error?

  Maybe it's the wrong place to ask this question but I want to just make sure Esxi does not cause it.

  I have ESXI 5.1 essentials as my host with windows 2008r2 guest that I am trying to enter the server windows key to activate but it gives me this error

  Invalid product key key you entered is not a valid windows server key?

  I bought the software and the key to the same place downloaded and install the os, the key is a MAK key

  While this has something to do with esxi and some configurations?

  Concerning

  While this has something to do with esxi and some configurations?

  No, if the Windows operating system is reversing a mistake like that, it has nothing to do with ESXi, other hypervisors/virtualization or whatever it is.

  Make sure that your MAK key is for the right edition (Standard/Enterprise) and that you have installed this one.

• Cannot save the Cluster containing the server < servername >: Idispatch error

  I'm building a new environment of Oracle EPM 11.1.2.1. I installed and configured HFM on one server and the HFM web components on another server. The server of HFM, all configuration tasks have managed including the registry servers and clusters. When I configure the HFM web server all configured successfully with the exception of the clusters and servers to register. It comes with an 'X' red and says failed.
  
  When I look in the configuration log, I see the following errors related to the cluster configuration:
  
  [SRC_CLASS: com.hyperion.config.wizard.impl.RunAllTasks] trace: custom tasks: register the application servers / Clusters for product HFM
  [2012 01-18 T 09: 22:38.793 - 07:00] [EPMCFG] [NOTIFICATION] [EPMCFG-05543] [oracle. EPMCFG] [tid: 19] [ecid: 0000JJlc4do76Empoos1yY1F5j62000004, 0] [SRC_CLASS: com.hyperion.hfm.config.HfmClusterRegistrationTaskProcessor] registered clusters:, HFM_TQA
  [2012 01-18 T 09: 22:38.793 - 07:00] [EPMCFG] [NOTIFICATION] [EPMCFG-05544] [oracle. EPMCFG] [tid: 19] [ecid: 0000JJlc4do76Empoos1yY1F5j62000004, 0] [SRC_CLASS: com.hyperion.hfm.config.HfmClusterRegistrationTaskProcessor] registered server: CGYAP1167
  [2012 01-18 T 09: 22:38.852 - 07:00] [EPMCFG] [WARNING] [EPMCFG-02067] [oracle. EPMCFG] [tid: 19] [ecid: 0000JJlc4do76Empoos1yY1F5j62000004, 0] [SRC_CLASS: com.hyperion.hfm.config.hfmregistry.HFMRegistry] * error during record HFM Cluster configuration: {0} [[*]]
  java.lang.RuntimeException: cannot save the server CGYAP1167: IDispatch #1553 error
  at com.hyperion.hfm.config.EPMWindowsConfigJNI.RegisterServer (Native Method)
  at com.hyperion.hfm.config.hfmregistry.HFMRegistry.configureHFMClusterRegistration(HFMRegistry.java:626)
  at com.hyperion.hfm.config.HfmClusterRegistrationTaskProcessor.execute(HfmClusterRegistrationTaskProcessor.java:99)
  at com.hyperion.cis.CustomTaskProcessor.execute(CustomTaskProcessor.java:94)
  at com.hyperion.config.wizard.impl.RunAllTasks.executeCustomTask(RunAllTasks.java:832)
  at com.hyperion.config.wizard.impl.RunAllTasks.execute(RunAllTasks.java:480)
  at com.hyperion.config.wizard.impl.RunnAllTasksState.run(RunnAllTasksState.java:90)
  at java.lang.Thread.run(Thread.java:619)
  
  ]]
  [2012 01-18 T 09: 22:38.853 - 07:00] [EPMCFG] [ERROR] [EPMCFG-05020] [oracle. EPMCFG] [tid: 19] [ecid: 0000JJlc4do76Empoos1yY1F5j62000004, 0] [SRC_CLASS: com.hyperion.hfm.config.HfmClusterRegistrationTaskProcessor] error: error when configuring Cluster HFM registrationFailed to register the server CGYAP1167: IDispatch #1553 error
  [2012 01-18 T 09: 22:38.865 - 07:00] [EPMCFG] [TRACE] [EPMCFG-01001] [oracle. EPMCFG] [tid: 19] [ecid: 0000JJlc4do76Empoos1yY1F5j62000004, 0] [SRC_CLASS: com.hyperion.config.wizard.impl.RunAllTasks] trace: running a custom task: register application servers / Clusters for product HFM
  
  Any ideas? I am running Windows 2008R2 64 Bit Enterprise on all servers. Oracle 11.2.0.2 RDBMS.
  
  Thank you
  
  Mike
  
  Published by: user2704998 on January 18, 2012 08:48

  Well, it really sounds like he can't connect then Firewall preventing. You have to find a way to turn them off because it is a sine qua non to disable firewall between servers to install Hyperion. I'm sorry.

  Pablo

• Starting the server of Essbase error

  Hi all
  
  I use the EPM 11.1.1.1.0 system.
  
  I faced a few problems with my set of planning upward and so I reinstalled the EPM system again.
  
  Now the installation and configuration went well and I didn't risk any problems.
  
  After installation and config was complete I used a command-line prompt and navigated to the bin of the server directory Essbase and enered the user company name and password that he pompted me to... but it starts with the following error message:
  
  
  + * [Sea 26 aout 11:57: 37 2009] Local/ESSBASE0 / / / Error (1053002) * +.
  Failed to create the application directory: E:\Hyperion\products\Essbase\EssbaseClient\+.
  * app\$ DM_APP$ [no such file or directory] * +.
  
  + * [Sea 26 aout 11:57: 37 2009] Local/ESSBASE0 / / / Warning (1051221) * +.
  Creation of data mining Object Management Application fails with the State [1053002]+.
  
  
  + * [Sea 26 aout 11:57: 38 2009] Local/ESSBASE0 / / / Info (1054032) * +.
  * Function alert cannot save Essbase: [@ESSBASEALERT] not activated * +.
  
  Can someone plesae help me with this? I was struggling with this problems with Essbase for quite awhile...
  
  Thanks in advance...
  
  Kind regards.
  
  Alicia

  Alicia says:
  Hi John,.

  Our customer bought 11.1.1.1.0 licenses for their Hyperion Planning application.

  Please let know us if we can still find an alternative solution.

  Kind regards

  Alicia

  Published by: Alicia on August 25, 2009 23:57

  Hello

  I am sure that they have purchased licenses for Version 11 and not only 11.1.1.1, the customer should be able to patch it 11.1.1.3 version because it solves many problems and is only a maintenance release.

  See you soon

  John
  http://John-Goodwin.blogspot.com/