Contact information for user browser card window

Similar Questions

• where can I find information for beginners to learn windows 7?

  where can I find information for beginners to learn windows 7?

  You can browse different websites and are looking for tips and tricks, or you can buy a book like Windows 7 for Dummies (or any other entry level book).

  But the best option is to do a combination of the use of the PC and reading. You can read all the books and read all sites, but you will learn a lot by using just the PC and windows.

• Contact information for the user

  Hi, I want to access the application to the personal data of the users. Name, phone, email, etc... How can I get this information?

  As far as I know, you will not be able to access "contact information" unless you embed a form in the application are users to fill in the details themselves (sharing of personal data and the extraction is illegal in some countries). You can create an HTML form and use in your folios where end-users can fill the data itself and create a 'Submit button' who sent you the details.

• New Tundra may not see the contact information on the SIM card

  I followed the directions that came from at&t, copied all sim card info to old phone(RAZR), activated new sim card in new Tundra, put new sim card in old phone, copied phone memory to sim card ( shows 200#s in use) put sim card in new Tundra---NO CONTACT #S!!!!!!
  

  Hello Scottyk,

  copied all sim card info to old phone(RAZR)
  

  You will need to do the opposite of this. Instead, copy the information on the old phone--> to the old SIM card.

  If you use an old SIM card and a new SIM card, both the following steps:

  • Save or copy all Contacts from your old phone to your old SIM card.
  • Place the old SIM card to your new phone.
  • The Contacts will appear in your list of Contacts.
  • Save all the Contacts recently imported on your new phone to the--> new phone.
  • Remove the old SIM card.
  • Put in the new SIM card.
  • Save (or copy) the Contacts of your new SIM card and/or your new telephone.

  ~ Christina

• Transfer photos and contact information for the razr of motorola (V3) to my computer using the usb connection

  I need instructions step by step to transfer my info and contacts, photo, and waiting for a cell phone motorola razr V3 I dropped and now the screen is white. I am on an acer inspire laptop which uses windows 7.

  I need instructions step by step to transfer my info and contacts, photo, and waiting for a cell phone motorola razr V3 I dropped and now the screen is white. I am on an acer inspire laptop which uses windows 7.

  Hi Trey

  If the phone is damaged, it is something you will need to contact the Motorola Support for the information you are looking for. Here is the link.  Motorola support
  I hope this helps.

  Thank you for using Windows 7

  Ronnie Vernon MVP

• I lost my information for the installation of Windows Anytime Upgrade.

  Express upgrade

  I recently received an anytime upgrade and now have lost all my ifo to re install. Can you help me.

  The first thing you need to do is to get your Windows 7 Anytime Upgrade key:
   
  An e-mail containing your product key will be sent to the e-mail address associated with your Windows Live ID account or e-mail address you provided if you ignored the account configuration. Note: If you use an email tool or spam blocker spam filter, be sure that you can receive e-mail messages from microsoft.com.
   
  What happens if I lose my product key?
   
  If you lose your product key, you can return to

  www.Windows7.com/GetKey and sign in using the "Sign In" link in the upper right of the page. This will allow to recover your product key if you have established your account with your Windows Live ID. If you do not configure a Windows Live ID account initially there is no record of your online product key. Check your e-mail since it is the only trace of your product key.
   
   
   
  or

  Here are four utilities, which can display your product keys if they are still there:
  Belarc Advisor: http://www.belarc.com/free_download.html
  (He did a good job of providing a wealth of information.)
   
  Also: http://www.magicaljellybean.com/keyfinder.shtml
  and: http://www.nirsoft.net/utils/product_cd_key_viewer.html
  and RockXP: http://www.majorgeeks.com/download4138.html which has additional features.
   
  --------------------
   
  The next thing you need to do is to ensure that your data is backed up:
   
  http://notebooks.com/2010/12/27/how-to-backup-to-an-external-hard-drive/
   http://notebooks.com/2011/02/25/how-to-restore-a-backup-from-an-external-hard-drive-in-Windows-7/
   
  -------------------
   
  The next thing you need to do is to reinstall the base license that you upgraded, Windows 7 Starter Edition or Home Premium.
   
  If your computer is pre-installed with Windows 7:
   
  New computers coming often pre-installed with Windows 7 have what is called a recovery partition. This is used to reinstall an operating system in the case of a system failure. To access it, you need to start when you start your computer by pressing a function key. This can be either F1, F2, F9, F10, F11, F12 key DEL or tab. See the manual that came with your PC for instructions on how to reinstall Windows.
   
   
   
  -Samsung uses ESC on most of its systems
   
  -HP use F9 on most of its systems
   
  -Fujitsu uses F12 on most of its systems
   
  -Acer use F12 on most of its systems, but often you need to go into BIOS to allow

  -Dell uses F12
   
   
   
  In general, look at the screen during the POST for a tip for what is possible.
   
   
   
  If your recovery partition is not available or damaged, you must contact the manufacturer of your computer, and request that a defined recovery disk you can use to reinstall Windows 7. They could practice a small shipping and handling.
   
   
   
  ------------------------
   
  If it was a store bought retail license:
   
  http://Windows.Microsoft.com/en-us/Windows7/installing-and-reinstalling-Windows-7
   
   
   
  --------------------
   
  After you have reinstalled your original license, make sure that it is enabled before doing the upgrade to Windows 7 Professional:
   
  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
   http://support.Microsoft.com/kb/950929/en-us

  ----------------------
   
  Redo the Express Upgrade:
   
  Click Start, type Anytime Upgrade, click on the option enter a key, enter the key of Windows 7 Anytime Upgrade When asked, click Next, wait while checking the key, accept the license agreement, click on upgrade, wait while the software upgrades, (it may take 10 minutes or more depending on the if updates are required) , your computer automatically restarts after the reboot, Windows 7 will notify you updating the computer, the computer will restart once more automatically and will be completed the upgrade, a window will appear notifying the upgrade was successful and your computer is ready to use, click Close, you should be upgraded to Windows 7 your files, programs and settings retained.
   
   
   
  ---------------
   
  Go to reactivate the license again.

• Unable to set password for user account on Windows XP

  Windows XP won't let me a password for my user profile. Its an admin profile and only on the computer. I went to change the profile and password and it gives me the icon of the hourglass for about 30 seconds, then he says that I did not meet the password requirements. Ive used about 10 different ones, but he does not accept anything.

  Windows XP won't let me a password for my user profile. Its an admin profile and only on the computer. I went to change the profile and password and it gives me the icon of the hourglass for about 30 seconds, then he says that I did not meet the password requirements. Ive used about 10 different ones, but he does not accept anything.

  given the complexity of password is enabled in the pc must be given a complex password

  more info on http://technet.microsoft.com/en-us/library/cc786468(v=ws.10).aspx
  Password must meet complexity requirements
  https://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/504.mspx?mfr=true

• BlackBerry Smartphones Can I retrieve contact information for a database without the BlackBerry

  This is my story - a couple of weeks, I dropped my 8130 Pearl in a large cup of water. After miraculously, he came back to life, I decided that it was time to SAVE my contact... information so I used the version of the office for 4.3.0.17 Manager do... Only, I clicked on "Addresses", which I guess means contacts. I joke that my poor BlackBerry not - the VERY NEXT DAY, went into the pool with me. Now, despite the fact that I just mentioned after swimming, I actually do not lead a lavish lifestyle... I live in the desert, and I had to enter my poor toddler, overheated in the pool as soon as possible. I have no cell phone insurance, but I don't have the $50 deductible to get a new BlackBerry. Now I use a Casio g opportunity ' Boulder area. I had so much contact info, I need. So, here is my question. Is there a way to convert information database (IPD file) I saved in a word document, or other legible form so I can get all my contacts?

  Thank you in advance,

  Crystal

  Crystal, Hello and welcome to the Forums of Support BlackBerry.com.

  Yes, google search for ABC Amber IPD Converter and use it. It is not free, but the trial software will manage a limited number of records.

  If you end up having a new BlackBerry, you can restore this backup IPD file on your new device.

• How to find the template information for an Acer Iconia Windows 8.1 Tablet

  I just got this Acer Iconia Windows 8.1 parent Tablet without CD and docs. Is there a way to discover its information model? Also, is it possible down to load its software system and recovery once I discovered its model?  Or can I reset it without CD? I need to back to factory setting because my parent forgot the password and I want to change the language.

  Thanks in advance!

  Welcome to.

  on recovery, read this KB:

  http://Acer--UK.custhelp.com/app/answers/detail/A_ID/32035/~/Iconia-w3-810-recovery-using-Acer-RECOV...

  to purchase recovery media:

  Acer recovery media
  If you are in the United States, you can buy it:
  http://store.Acer.com/store/aceramer/en_US/eRecovery

  If you are outside the United States, you must call/email your regional Acer support service:
  http://www.Acer.com/worldwide/support/

• Contact information for installation of blackBerry Smartphones.

  I recently purchased the Blackberry Torch; the numbers were transferred over my old Blackberry Pearl phone.

  One of my many Contacts had NO code appearing in front of the 7 - digit telephone number.  I tried to text him and of course, she came back with the error message.  I went and edited the number to include the area code (made a 10-digit number) - and I still get the same error message.

  I deleted this contact 3 times and entered its data with different names - but the same phone with all the 10 listed numbers - and I still get an error code when I text.  I just listed the number under the 'work' instead of 'mobile' - always impossible to send text.

  I called him - no problem; He can call me - no problem; He can text me - no problem; I just can't text or make a text.

  What is going on?  Does anyone have a solution for this?

  Smartphones Dang sure too!

  OK, sounds similar to something that happened to me last week, I tried to call a number instead.

  Look at your call history, by accessing your Messages folder > press Menu > folders > phone call logs and you will need find and remove all previous attempts to call this number.

  Also, in the same place, watch sending SMS and delete all previous attempts of SMS.

  Your device "to remember" and use these previous calls to that number as a story of several parameters and if you remove all the people, I would then do a full restart on the device, in this case > with smart BlackBerry poweredphone, remove the battery for a minute and then reinsert the battery to restart. A reboot in this way is prescirbed for most the gltiches and operating system errors, and you will lose any data on the device doing so.

  Now, after, you have removed all instances of old of the call/SMS and restarted, try again.

• release of contact information for selection

  Good day to all,

  First of all, I am so new in programming.

  I learn just about a week (Java language).

  I already have a code that indicates the coordinates of the selected area.

  But output in the text file is x, y, x, y, x, y...

  I want the output to be x, x, x, and y, y, y... in the new line.

  Example:

  In the code, the output is:

  2,458,476,442,484,420,519,363,528,355,554,334 578,337,529,488,512,526,478,512,486,464,484,464,480,475,477,475,479,458,477,458,472,462,47

  What I want is:

  578,529,512,489,478,486,484,480,477,479,477,472,472,476,484,519,528,554

  337,488,526,517,512,464,464,475,475,458,458,462,458,442,420,363,355,334

  I mean the coordinates x are on the front line and are on the second line.

  Here is my code:

  #target Photoshop

  var data = mapa_seleccion(activeDocument,data)

  function mapa_seleccion(doc,out) {}

  HS var = doc.historyStates;

  preferences.rulerUnits = Units.PIXELS;

  doc.selection.makeWorkPath (1);

  var p = doc.pathItems ["Work path"];

  var a = new Array();

  var t = 0;

  var l = p.subPathItems.length;

  for (k = 0; k < l; k ++) {}

  var n = p.subPathItems [k].pathPoints.length;

  a [k] = new Array (n);

  for (i = 0; i < n; i ++) {}

  a [k] [i] = new Array();

  a [k] [i] = p.subPathItems [k]. PathPoints [i]. Anchor;

  }

  }

  var t = 0;

  for (k = 0; k < l; k ++) {}

  var n = a [k] .length;

  var s = 0;

  for (i = 0; i < n; i ++) {}

  var j = (i + 1) %n;

  s += (a [k] [i] [0] * a [k] [j] [1]);

  s = (a [k] [i] [1] * a [k] [j] [0]);

  }

  s / = 2;

  t = s;

  }

  doc.activeHistoryState = hs [hs.length - 2];

  out = new Array()

  out. Mapa = has

  out. Area = parseFloat(t/doc.) Resolution/doc. Resolution * 2. 54 * 2. 54) .toFixed (2) //conv ierte a cm2

  return on

  }

  Alert (data .mapa [0]);

  Data .Mapa [0];

  If ($.os.search(/windows/i)! = - 1).

  fileLineFeed = "windows".

  on the other

  fileLineFeed = "macintosh";

  var fileName = app.activeDocument.name

  fileOut var = new File('~/Desktop/coords.txt');

  fileOut.linefeed = fileLineFeed;

  fileOut.open ("w", "TEXT", "");

  fileOut.writeln (data .mapa [0]);

  fileOut.close ();

  Thanks to muyshangai for the codes.

  And you guys thanks in advance

  var data=mapa_seleccion(activeDocument,data);
  
  function mapa_seleccion(doc,out){
    var hs = doc.historyStates;
    preferences.rulerUnits = Units.PIXELS;
    doc.selection.makeWorkPath(1);
    var p = doc.pathItems["Work Path"];
    var a = new Array();
    var t = 0;
    var l = p.subPathItems.length;
    for ( k = 0; k < l; k++) {
         var n = p.subPathItems[k].pathPoints.length;
         a[k] = new Array (n);
         for ( i = 0; i < n; i++){
              a[k][i] = new Array();
              a[k][i]=p.subPathItems[k].pathPoints[i].anchor;
              }
         }
    var t = 0;
    for ( k = 0; k < l; k++) {
         var n = a[k].length;
         var s = 0;
         for ( i = 0; i < n; i++){
              var j = (i+1)%n;
              s+=(a[k][i][0]*a[k][j][1]);
              s-=(a[k][i][1]*a[k][j][0]);
              }
         s/=2;
         t+=s;
         }
    doc.activeHistoryState = hs[hs.length-2];
    out=new Array()
    out.mapa=a
    out.area=parseFloat(t/doc.resolution/doc.resolution*2.54*2.54).toFixed(2) //conv ierte a cm2
    return out
  }
  // data,mapa is an array of nested arrays
  alert(data.mapa.toSource());
  // here is how to 'split' the x,y array of the first subPath
  var xArray = [];
  var yArray = [];
  for(var i=0;i		   

• Contact information for return pixel Imaq image with the mouse click event

  Hello

  I'm trying to get the coordinates in pixels of an image Imaq based on a mouse click event, similar to this post and this post. The problem is that with the first post, I get the coordinates in the image control and hesitate to trust them, they seem to have the Center origin, may return negative coordinates and do not represent the actual size of the detector that I use (512 x 512). It also returns the coordinates outside the actual data when it is clicked on the image control framework. The second method returns simply null coordinates. What I want are the coordinates of the pixel displayed when hovering the mouse imaq image control framework.

  What baffles me, is that I tried the second method with a png stock file and it works fine, it is only when I create an image from the data of my camera than the coordinates are returned null. Note data views of camera under control of image very well.

  Any ideas would be useful. Enclosed is a picture of the offending code and the Panel before displaying the camera data is coming (I know it needs some cleaning).

  Thank you

  Tyler

  for help, please send your vi

  but I think that this example vi is your solution

  check this vi

• contact information for signature for when I send mail.

  need counseling to addeding my details on all my emails out, I get lost reading all quick you offer.

  You use the same method that I posted in the previous query.

  In your e-mail client, press F1 and search for 'signatures', click 'Add signatures' or similar.

• Contact information for InvokeRequest

  I try to get the coordinates when share contact chose to contacts and my app has been invoked.

  onInvoked is called, but I can't understand how to get the Contact of the InvokeRequest that I receive as an argument.

  That's what I tried...

  void ApplicationUI::onInvoked(const bb::system::InvokeRequest& invoke)
  {
      qDebug() << "oninvoked";
      Contact contact;
      ContactService cs;
      cs.contactFromVCard(QString(invoke.data()));
      qDebug() << "name: " << contact.displayName();
  
  }
  

  But it seems to be wrong, how to do what I'm doing?

  If you call uri(), then you can see the URL to the local file

  request.uri()
  

  This can be converted to the local file path:

  request.uri().toLocalFile()
  

  All you need now is to open the file and get all your data

      QString localpath = request.uri().toLocalFile();
      qDebug() << "localpath = " << localpath;
      QFile file(localpath);
      if (file.open(QIODevice::ReadOnly | QIODevice::Text))
      {
         QTextStream in(&file);
         while (!in.atEnd()) {
            QString line = in.readLine();
            qDebug() << line;
         }
      }
  

  This isn't the perfect solution, but it should work

• How to find contact information for vcenter

  I would like to get all the info from vcenter as below

  Name	Version	Release of	Build	Setup	Version

  vCenter Server 5.5 updated 3A

  5.5 U3a

  2015 10-22

  3142196

  3154313

  I did google but have not found powercli which can find it

  The cmdlets for this?

  Thank you

  Sorry bad google search

  Download the Version of vCenter using PowerCLI