New Tundra may not see the contact information on the SIM card

Similar Questions

• T440p - Ericsson N5321gw does not recognize the SIM card

  Hey, my new T440p with integrated WWAN Ericsson N5321gw does not recognize the SIM card. I am running Win7 64 Bit and in the Device Manager, I see the Ericsson unit without any error. Once I launche logins, I have the error message if there is no SIM card inserted and I have to insert the SIM card and try again. The SIM card is inserted as indicated next to the slot (although I tried in other ways, too). I tried two different SIM cards just to be sure, two SIM cards work in my phone. Any idea? Thank you very much!

  
  

• 5 c does not recognize the sim card

  I got a plan on the development of media and 5 c. Phone is unlocked and now does not recognize the sim card. What should do?

  What is the error message you get?

• Hello! I restored my iPhone 5 because IOS 9.2 does not work well, and now the IPhone does not recognize the SIM CARD ☹️ please someone help me! What can I do?

  Hello!! Recently, I have restored my iPhone 5 because IOS 9.2 does not work well. But now my iPhone does not recognize the SIM CARD.

  I Don' t know what to do, help me please

  You get an error message?

  What did he say?

• Software JetDirect 380 X can not see the airport card in the laptop G4 PPC

  Hello

  I tried to add a customer to the airport. It's a LaserJet 1200. But the software that comes with the JetDirect tells me to install an Airport card in the laptop. Now I can join hpsetup and print to the LJ 1200. But in practice I have to disconnect from the internet and the map Airport.  So, I know the JetDirect and LaserJet 1200 work very well. I tried different settings on the airport, but nothing has really changed the software on the laptop not finding the Airport card.

  Now I have a WOW goes a Xsense MIH 130 Xrouter, then go to the Airport Express Terminal. All Mac desk top of page 933mh, 1.67 ghz powerbooks. I use OSX10.4 to 10.5.8.  I don't know if the router is the problem or if the parameter in the jetdirect should be changed to the ad-hoc to something else. Don't know how to do this. With it, do not see the map Airport, I can't do the enbedded 192.0.0.192. There are a lot of maybe if I do this or if I do this it might work. Since the configuration of the printer in the TCP/IP section page everything below the line, Config by: is not specified.

  Thanks for any advice.

  Well again I was able to get to the stage 1.6 (in 10.5.8 printing Center is not the same). I could remove the printer that was working on its own network of HP. But was unable to add a printer in 0SX 10.5. Perhaps through IP printing, but do I put as the address? It is the site of HP to get instructions on a 380 X and another printer.

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?lang=en & CC = US & TaskID = 115 & prodSeriesId = 29789 & prodTypeId = 18972 & prodSeriesId = 29789 & objectid = c00257796

  Maybe I should to the left of the printer, but I've changed the SSID in the jetdirect to match the network. The IP printer 192.0.0.192 or 192.0.0.193 or just use the network name it was changed to?

  To close, but I thought a few times.

• BBM SDK Apps appearing does not in the sim card

  Hello everyone.

  1. I have install MDS, installed the sim card

  2 Ran 2 simulators using sim1 and sim2.bat.

  3 added sim2 and sim1 BBM contact,.

  4. in Eclipse went to debug, dug configurations, Blackberry Simulator, advanced

  Added to this that my custom comand line:

  "C:\Users\Adminy\AppData\Local\Research in Motion\BlackBerry Smartphone simulators 7.0.0\7.0.0.236 (9900) \fledge.exe" / app = Jvm.dll / Pocket = 9900/session for partner = Sim1/app-param = JvmAlxConfigFile:9900.xml/data-port = 0x4d44/data-port = 0x4d4e /pin = 0x2100000A/app-param = regVersion = 3 /app-param=regDestIP=127.0.0.1/app-param = regDestPort = / app-param 19781 19783/app-param = DisableSyncServiceRecord = regSrcPort =

  This my dir of custom work:

  C:\Users\Casey\AppData\Local\Research in Motion\BlackBerry Smartphone simulators 7.0.0\7.0.0.236 (9900)

  And this as my MDS directory custom:

  C:\bbmsdk\MDS Simulator\mds

  But when I try to debug the example applications that they are not appearing on the Simulator. Any ideas?

  I received the responsible tic tac toe sample but now when I run it it says "BBM is not available", but when I run the two simulators can I use BBM back and forth between them. Any ideas?

• Does not recognize the sim card

  Hello

  . REF 1730461N. Problem Acer A1 8-11 do not recognition of sim card. have seen my cell your providerEE .not only it does not recognize my SIM EE also, it does not recognize t orange o2 vodafone mobile. Can you advise me on what to do next?

  Yours sincerely

  PS Can you let me know what to do now thanks

  Larry M Goff

  Actually, Phil, the system would be came carrier, with specific software for a specific SIM carrier carrier.

  If you then change the SIM card to another carrier and having problems to make it work...

  It's always a problem of carrier.

  All THE problems of card SIM and the carrier specific software are supported BY THE CARRIER, and not by Acer.

• HP Pavilion 500-130DE: HP Pavilion 500-130DE do not see the graphics card in windows and can not change the primary graphics card.

  So I got a new (TG 640) graphics card for my pc. I tested it on another computer the day before. Worked well. I plugged my HP Pavilion 500-130DE and started. I changed my slot onboard DVI cable to the GT 640 and cable says no signal. While the pc was still on I switched the cable back to the integrated graphical location motherboard and got the windows login screen. So I thought that BIOS yet configured when the integrated graphics card (Intel HD 4600). I turned off the pc and booted to BIOS. But I've never seen a such limited BIOS before! Only thing you change is boot order. I saw a tab advanced but could not find the settings that I needed. In the only device manager devices that appears is the HD 4600. So I checked power is 300W should be sufficient for a map of 75W (only need the PCI for power). Someone knows how to fix this?

  Hello

  After the PC starts to open the window RUN and enter: MSINFO32

  If the BIOS on your PC version is version 8, and then review the information below.

  HP Secure Boot Windows 8 themes Computer does not start after the installation of a video (Windows 8) card  

  A word of warning: the reality is that there is no guarantee that any particular graphics card will work in any particular PC, even if the graphics card works in other PC or even the same or similar model PCs. Know what the return policy is before you buy.

  Thanks for posting on the forum.

• Do not see the video card

  

  NVIDIA 840 m 2 GB video card does not appear

  Go to the Device Manager, then click on graphics cards. You should see xxxx hd Intel and NVidia xxx card. To change the settings of the NVidia card run NVidia Control Panel.

• After the awakening of system does not see the sound card

  Hello

  I have a problem with the Hibernate. After the wake-up system do not see my card (creative sound N2 on USB key). I've been in touch with Creative and I know that I need to uninstall my laptop Realtek sound card in BIOS. Of course, I don't see any possibility in the BIOS. In Windows XP Home edition, can I uninstall this sound card, but after reboot this card is itself back installation.

  And I want to know how to completely disable Realtek.

  Hi Tomasz

  One question;
  You're talking about on a map of external sound that is connected via USB to the laptop or talk on the Realtek integrated sound card!

  I know a similar sound problem on Vista OS.
  I read in the knowledge base Microsoft on similar problems;

  Please check this:
  http://support.Microsoft.com/kb/929685/en-us

  Please provide more details if this fix will not help you!

• HP Pavilion 500-120F do not see the graphics card!

  
  

  Hello:

  Have you changed the settings of the BIOS 2 required before installing the video card no HP, you bought?

  http://support.HP.com/us-en/document/c03653200

• BlackBerry smartphones can NOT FIND the SIM CARD

  BLACK BERRY 9900 MMY MOBILE NOT SEE NOT FOUND SIM CARD IT

  This is the best fix for your device!

• wide screen resolution may not see the buttons

  original title: screen resolution

  too big can't see my button apply

  Sunday, April 22, 2012 22:03 + 0000, galerogers wrote:

  too big can't see my button apply

  Right-click on the desktop and choose screen resolution. To take
  a higher level * resolution.

  Ken Blake, Microsoft MVP

• Do not see the SD card in the PC when PALM Treo 700 p connected by USB

  Is it possible to have my PC see map of memory PALM treo as a storage device when attached.

  Hello and welcome to the Community Forums of Palm.

  One way is to use Card Export www.softick.com .  There are freeware alternatives, but I don't know.

  Message relates to: None

• BlackBerry smartphones can not see the map

  My BB bold 9700 does not see the media card that I reformatted and works on PC, but now I don't see mass etc. storage to light the tried to restart reintegrate them etc. What is provided on my phone?

  contact your support network.

  If your phone is less than 12 months old, you are eligible to apply for waaranty.

  I can't think of anything.